Re: Transporting Authorization Groups From QA To PROD
All,
We have some custom Authorization groups tied to custom tables on QA(testing) and the same custom tables exist on PROD(production) too but without the custom auth groups.
Is there a way to transport just the custom authorization groups from QA to PROD. Any pointers on this would be appreciated.
Thanks
-Murali
Hi Murali,
Please do the following:
1. Call SE11.
2. Put whatever Z table name and change.
3. On menu 'Utilities' --> 'Table maintenance generator'.
4. On menu 'Environment' --> 'Authorization' --> 'Authorization groups'.
5. Click on the auth group that would be transported.
6. On menu 'Table view' --> 'Transport'. Then save the transport.
7. Click 'Include in request'. Then you will get a message 'Entry flagged for ......" on bottom-left of the screen.
8. Save the change.
9. Click 'Back' until out of SE11.
If you check the transport request, you will see some entries in table TBRG and TBRGT: <client>S_TABU_DIS<authgrp>, <client>1S_TABU_DIS<authgrp> and <client>ES_TABU_DIS<authgrp>.
Hope it helps.
Regards,
Agoes
Similar Messages
-
Transporting SLD objects from DEV to PROD
Hi,
I need to move My SLD objects from DEV to PROD. There is no QA. Also SLD is not common across DEV and PROD.
Thanks!!
Regards,
Miten.Hi,
How to handle SLD for Tranporting Dev to Quality ser
https://service.sap.com/~sapdownload/011000358700001684302005E/HowToSLDandXI.pdf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/0fa2c490-0201-0010-61b4-df12869c4753
Transporting XI from DEV to QA
Transporting XI from DEV to QA
using CMS system. in XI
1. /people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
2. /people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
3. /people/sap.india5/blog/2005/11/28/xi-software-logistics-solution-iii-cms
4. /people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi --> Overview of Transition from Dev to QA in XI
5. /people/sravya.talanki2/blog/2005/12/20/inconsistencies-while-transporting-rfc-objects-from-dev-to-qa-150-sp12
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
http://help.sap.com/saphelp_nw2004s/helpdata/en/93/a3a74046033913e10000000a155106/content.htm --> Transporting XI Objects
http://help.sap.com/saphelp_nw04/helpdata/en/ef/a21e3e0987760be10000000a114084/content .htm --> Configuring Groups and Transport Targets
Look into this blog for how to export / improt IR and ID objects,
/people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
Please go through these links which actualy show you how to configure CMS and also gives you all information regarding it.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/43f5d790-0201-0010-2984-ff72d822b109
http://help.sap.com/saphelp_nw04/helpdata/en/de/a4214174abef23e10000000a155106/content.htm
/people/daniel.wirbser/blog/2005/10/27/tcsfilecreateexception--error-while-assembly-of-software-components-in-nwdi
http://help.sap.com/saphelp_nw04/helpdata/en/f6/719a2172f74b67b150612a7cd3b7df/content.htm
http://www.sap-hefte.de/download/dateien/964/074_lesesprobe.pdf
Here are some blogs.
/people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
Re: Moving project from Dev to QA
Error while exporting/transporting the Business system from Dev to Quality
Transporting the scenario frm Dev Server to PRD Server
transporting data from Dev to quality using CMS
Regards,
Phani
Reward points if Helpful -
Transporting standard table from DEV to PROD
Hi All,
I have updated a table called T166K and T166P for Purchase Order Printouts.
I have entered few values in the above mentioned tables in DEV server.
Now, i would like to move these tables to Production, since i can not create values to these tables in Production server.
How to move tables from DEV till PROD...??
NOTE: While updating these tables, system didnt prompt for saving under Transport Request Numbers in DEV server.
Regards
PavanHi,
You can use scatt tool to upload the data in the developement server. Prepare a file with data. Do it in developement environment only. then in SCATT you have remote logon facility using which you can run the scatt in developement environment and the result will be placed in the production server.
Let me know if you what more information on this.
Pls reward points if helpful
rgds,
Harikrishna -
Transporting a workflow from DEV to Prod
Hi all expert,
thanks for your help in solving my issue .. that was awesome guys. Now I stuck with transporting the workflow that i have made from development system to production system. I have tried using regular transport request, and the workflow number exist but no active version available. So I cannot using it. Any suggestion on something that might have been forgotten?
thank you in advance for your help
regards,
davidHi David,
I hope you configured the SWU3 in Production as well.
Then in Production check the syntax error in your workflow template using CTRL+F2.
During the transports, sometimes some containers may missing.
If there is no syntax error, then in Development create new version and activate the workflow again and do the transport again.
Before transport, do a buffer sync using transaction SWU_OBUF.
Thanks,
Viji. -
How to 'transport' CPS config from QA to Prod?
Hi,
I setup a full job schedule with definitions and chains for a ECC6 system QAS (in isolation group QAS).
I like to move this same QA config now to be valid for out Production system PRD.
Is there any way of 'transporting' this config rather than having to redevelop the whole schedule for PRD?
Thanks,
AdriaanYou have to buy the full license of CPS to get this 'nice' important feature.
-
Transport a char. from dev to prod
hi all,
i need to add a char. to a cube which has data, so i know i first need to delete the data in the cube and add the char.
when i transport that to qa, if the cube in qa has data, do i need to delete the data in the cube in qa, before transporting the char.?
thanks in advanceHi BSK,
No need to delete data for adding a characteristic to a cube. You can just add the characteristic and send it to QA. No problem.
Hope it helps.
Thanks,
Soumya -
Transport WEBI report from QA to PROD
Hello expert,
I create a webi report in QA, how can I transport this webi into production, do I have to create the same webi report in production, or I have some approach to change the datasource for this QA webi report ?
Many Thanks,Hi!
look at the LCM
http://www.sdn.sap.com/irj/boc/index?rid=/webcontent/uuid/1064e133-ae9c-2b10-c3a7-fb7b1a313dfb [original link is broken] -
Best method to transport changes from DEV to Prod Environment
Hi SDNers,
I have a requirement here :
I have made some changes to the DEV environment, which i want to move to the production Environment.
Changes mainly include the Structural changes, XSD's, Import maps, Remote systems, Export Maps, Validations etc. Please note that I DO NOT WANT to transport the data from DEV to Prod environment.
I can see 2 options available :
1. Export/Import Repository schema - But as far as i know, the import and export maps will not be transported auomatically through Export/Import Schema.
2. Archive/Unarchiving Without data -
Here are my questions :
1. Is the 2nd option feasible looking at the changes I need to transport? If yes, is there any recommended guide available by SAP suggesting the 2nd option for trnasport mechanism.( Please sendme the links)
2. Will it affect the data in Prodcution in any chance?
3. Is there anything Archiving/Unarchiving without data cannot handle.
4. Will it impact any other normal running of Production environment.
Please respond to my queries.
Thanks and Regards
Nitin JainHi Nitin,
If you use Archive/UnArchive option without data then you cannot persists the PROD env since you need to UnArchive the entire repository which is empty and then you need to move the PROD data into this repository.
1. Is the 2nd option feasible looking at the changes I need to transport? If yes, is there any recommended guide available by SAP suggesting the 2nd option for trnasport mechanism.( Please sendme the links)
Ans. I don't think, 2nd option is feasible as a mentioned earlier. This option should be used when we need the entire repository without data which is not the case you are looking for.
2. Will it affect the data in Prodcution in any chance?
Ans. If you are using 2nd option then this question is not related because when you UnArchive, you will get the new repository so this wont affect the existing repository at all.
3. Is there anything Archiving/Unarchiving without data cannot handle.
Ans. Workflows
4. Will it impact any other normal running of Production environment.
Ans. If you are using 1st option then you need to unload the PROD repository first and then import the changes. For option 2 its not related.
Regards,
Jitesh Talreja -
Transport Authorization Objects
Hi all,
Can you please clarify this issue. Is it a good practice to transport authorization objects from Dev to Q/A to Prod or create them separately in all the three environments. I transported the roles but I am not certain about the authorization objects.
Thank you for your time,
RamHi,
It is a policy decision what will be the source system of your authorizations. From there you can use the transport system to spread the roles over the landscape. To keep everything in sync, use the transport system otherwise in a matter of time you have no idea which is coming from where.
have fun
Jan van Roest -
Moving XI transports from QA to Prod server
Hello,
We are getting ready to send our XI transports from the QA server to the production server. We are currently using the file transfer method - we have not yet finished setting up the CMS server.
Now my question is this:
For the Integration Repository, am I supposed to send the same file created from our dev server to the production server, or do I create a new transport file from our QA box and send that file to production? Same question applies to the Integration Directory.
For example, the FileA.tpz gets created in the dev server, exported to the QA server. Developers are done testing in QA and want to move the objects to production. Should I export the same FileA.tpz to the production box OR generate a new transport file from the QA server (FileB.tpz) and send that to production box instead?
Thanks in advance.Joy,
Ideally you should move from Dev to QA and from QA to Prod. Then everything will be in sync. If you move directly from Dev to Prod and if there any changes then they will not be in QA. So this should not happen.
Because only after developement you will move to QA. Once when you test in QA then you will move to Production from QA.
Check this weblogs for further info:
/people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi
/people/marion.schlotte/blog/2006/03/30/best-practices-for-nwdi-track-design-for-ongoing-development
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
/people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
/people/sap.india5/blog/2005/11/28/xi-software-logistics-solution-iii-cms
---Satish -
Error in PC while transporting from Qual to Prod
Hi All,
i am getting the error while tarnsporting the PC from qual to prod.I have introduce only AND event in PC and change one Attrib Change step.
In TR i have collected PC,Event,Attrib Change step.
But while transporting it result in error at one DTP step.I have checked the corresponding DTP is present there in Prod but with diffrent technical name.
As far as i know it should have replace the corresponding DTP present in prod..
Is this the error from BI side or connection error between system from basis.
Or is this something related to system being out of sync with eachother.
i am also showing you the error i get as below:
Version 'M' of chain ********* was saved without checking
Results of check for process in chain :
Results of check for process in chain :
Results of check for process *DTP_LOAD DTP_4KYC4AJY4UAPLDJ4MZE8YYUYL in chain* ZA_SD_006:
I got error in this DTP
Results of check for process LOADING ZPAK_4GJLZPDJRV346VYKJLGKTDK7S in chain ZA_SD_006:
Start of the after-import method RS_RSPC_AFTER_IMPORT for object type(s) RSPC (Delete Mode)
Start of the after-import method RS_RSPV_AFTER_IMPORT for object type(s) RSPV (Delete Mode)
Start of the after-import method RS_EVEN_AFTER_IMPORT for object type(s) EVEN (Delete Mode)
/ | Errors occurred during post-handling RS_AFTER_IMPORT for EVEN L |
RS_AFTER_IMPORT belongs to package RS
/ | The errors affect the following components: |
/ | BW-WHM (Warehouse Management) |
/ | Post-import method RS_AFTER_IMPORT completed for EVEN L, date and time: 20110411140348 |
Start of subsequent processing ... 20110411140341
End of subsequent processing... 20110411140348
Start of................ 20110411140348
/ | End of.................. 20110411140348 |
Execution of programs after import (XPRA)
End date and time : 20110411140348
/ | Ended with return code: ===> 8 <===Hi Deepak,
When you migrate DTPs from Dev to Prod , a new DTP ID are generated in Prod system and your DTP in the Process chain points to Dev's DTP and that is why you get this error
What i can think of is this scenario:
1. Original chain created and transported to Production. There due to some requirement the DTP would have changed(some body deletd the original one and created new one). Now the existing chain in production have the new DTP created there.
2. When u tried transporting the original chain from Dev it had the DTP created initially.
3. Since the DTP existing in Prod is having a different technical name than the one initially created in Dev so due to this this mismatch it might not get activated.
4. So better to create the DTP there itself and add it to the chain.
Regards
Raj -
Problems when transporting from DEV to PROD
Hi experts, I have problem during transport from DEV to Production.
We have a DEV, QAS and PRODUCTION and we have transport from DEV to QAS very well. But when we transport from DEV to PROD, recibe an error like:
After beginning the import method RS_IOBC_AFTER_IMPORT for Objects types IOBC mode (activation)
Failed to verify catalog InfoObjetos ZCM_UNIMET_CHA01
The InfoObjeto ZCM_RENC version does not exist in active
The InfoObjeto ZCM_RENM version does not exist in active
1.The Query is: Wy if the transport go OK from DE to QAS, then The transport from DEV to PROD terminated in error?.
2. There are any items to check in production before to transport?.
PD: All of the Objects in DEV are in ACTIVE status
Tanks,
Ramon SulvaranThe transport ended in QAS with error code (4) and ended in Producion with error code (8), the detal of the error in Production begin with:
Home After import RS_ODSO_AFTER_IMPORT method for type (s) ODSO object (trigger mode)
Activation of DataStore objects of type Object
Check DataStore objects of type Object
DataStore Object Verification ZCM_DS01
The DataStore object is consistent ZCM_DS01
Burning the DataStore objects of type Object
Internal activation (DataStore Object)
Pretreatment / Creating DDIC objects to DataStore Object ZCM_DS01
Table / View / BIC/AZCM_DS0100 (type 0) DataStore object recorded ZCM_DS01
Create / Delete the indexes for the active table
Table / View / BIC/AZCM_DS0140 (type 4) recorded ZCM_DS01 DataStore object
Type of table / BIC/WAZCM_DS0100 recorded
Table / View / BIC/VZCM_DS012 (type VIEW) recorded ZCM_DS01 DataStore object
Log ZCM_DS01 DataStore object changes was recorded successfully
Writing Object Catalog entries (Tadiran)
He has written the object TABL / BIC/AZCM_DS0100 in catálgo objects (Tadiran)
He has written the object TABL / BIC/AZCM_DS0140 in catálgo objects (Tadiran)
He has written the object TABL / BIC/VZCM_DS012 in catálgo objects (Tadiran)
He has written the object TTYP / BIC/WAZCM_DS0100 in catálgo objects (Tadiran)
Activate all ABAP Dictionary objects (5):
Error / Warning in progr.activación Dict., Detailed log> Detail
Activate table / BIC/AZCM_DS0100.
Lack of expansion to the category table
Lack of extension category for include or subtype .......
When i go to BW Production to check teh object. I see tha the Object was create but in inactive status (grey color). When y Try to Actiavate it y see the error: Error/ Warning in program Activation Dcit. Detailed Log -> Detail -
Transport from DEV to PROD BPC 7.5
Hi
i had a question of transporting AppSets from DEV to PROD System.
On the PROD Systems are no AppSets the PROD System is completly new.
Is it possible to transport the AppSets directly from the DEV to the PROD or must we first make a Backup in the DEV and an Restore in the PROD.
Thank you for your help.Hi Carsten,
As far as i understand you need to transport application sets individually, from development to production. The object type ASET and APPM refer to an application set and application respectively.
As mentioned above, you can check and confirm from SAP Support if the back up mode ia now available to users.
Hope this helps.
Regards,
Poonam -
Transport SLDm repository, directory objects from Dev to Prod
Hi Forum,
I heve a development XI system and a production XI system,
and seperate SLD for each of them,
In development SLD i have created,
1 business system (third party)
1 product and software component
in Repository of Development XI,
i have a file to file scenario,
in directory of Development XI,
i have configured the scenario,
Now i want to transport everything (as explained above) from Development to Production XI system ....including SLD things ...
please tell me the procedure and sequence
Edited by: rana brata de on Jan 18, 2008 9:16 AMHi,
Check the links below for transporting the Objects from DEV to PRD.
How to handle SLD for Tranporting Dev to Quality ser
https://service.sap.com/~sapdownload/011000358700001684302005E/HowToSLDandXI.pdf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/0fa2c490-0201-0010-61b4-df12869c4753
Transporting XI from DEV to QA
Transporting XI from DEV to QA
using CMS system. in XI
1. /people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
2. /people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
3. /people/sap.india5/blog/2005/11/28/xi-software-logistics-solution-iii-cms
4. /people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi --> Overview of Transition from Dev to QA in XI
5. /people/sravya.talanki2/blog/2005/12/20/inconsistencies-while-transporting-rfc-objects-from-dev-to-qa-150-sp12
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
http://help.sap.com/saphelp_nw2004s/helpdata/en/93/a3a74046033913e10000000a155106/content.htm --> Transporting XI Objects
http://help.sap.com/saphelp_nw04/helpdata/en/ef/a21e3e0987760be10000000a114084/content .htm --> Configuring Groups and Transport Targets
Look into this blog for how to export / improt IR and ID objects,
/people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
Please go through these links which actualy show you how to configure CMS and also gives you all information regarding it.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/43f5d790-0201-0010-2984-ff72d822b109
http://help.sap.com/saphelp_nw04/helpdata/en/de/a4214174abef23e10000000a155106/content.htm
/people/daniel.wirbser/blog/2005/10/27/tcsfilecreateexception--error-while-assembly-of-software-components-in-nwdi
http://help.sap.com/saphelp_nw04/helpdata/en/f6/719a2172f74b67b150612a7cd3b7df/content.htm
http://www.sap-hefte.de/download/dateien/964/074_lesesprobe.pdf
Regards,
Phani
Reward points if helpful -
How to transport Authorize Function Group for a table
Hi, Expert,
I created a customize table ZF304 with Authorization Group ZFIG in development environment. Somehow, the ZFIG did not transprot to QA. The Authorization Group for table ZF034 in QA show: &NC&
I need retransport the ZF304 table with ZFIG to QA. When I use the SE54 > Utilities > Total Transport, the ZFIG did not show in the object list.
Is it necessay that the ZFIG need specific in the transport? or it is already include int eh ZF304 transport?
In other word, how to make the QA Authorization Group show 'ZFIG' in stead of '&NC&'. How to do the transport in RD0 to make this happen.
Thanks,
HelenHi,
Check if you have an entry in the transport request as depicted below:
Definition of a Maintenance and Transport Object R3TR TOBJ ZF304 Object Locked
If not then please add it in your task.
KR Jaideep,
Maybe you are looking for
-
Please help with my helper class
Hi, plz I need some assistance with this: I have a big table which consist of 200 columns. This table gets fields from different tables. It has records of orders which may have several items and each item can have up to 8 taxes. So i have fields reap
-
Billing plan with partial Delivery
Hello, I would like to ask question regarding the Downpayment process when processing partial delivery. I have a scenario where i manage a sales Order with item required 2 PC. I have a billing plan for the sales order, with a Fisrt payement against t
-
To make RFQ form or Quotation form read only after the satus is made closed
Hi All, I have a requirement where we need to make all the fields either on RFQ or Quotation form read only/freezed/greyed out once the document status is made Closed from Active satus. The User should not be able to change any value in the RFQ or Qu
-
How to stop the encoding ?plz see the code and correct it
public class NewClass /** Creates a new instance of NewClass */ public NewClass () StateHelper sh=null; Processor p=null; try p=Manager.createProcessor (new URL ("file:///ring.wav")); sh = new S
-
I keep getting a message to update my flash player, then a screen showing flash player pro appears, I don't have this on my iPad that I'm aware of. I cannot view videos etc (new to ipad) can anyone assist please.