Re: Two brand new J1800i motherboards not turning on...

What kind of USB devices are connected?

Hello everyone,
When i'm gaming (High graphic) games my pc randomly shuts down, sometimes after an hour and sometimes after 10 minutes. My first guess was overheating or lack of watt.
I've been busy all day trying to figure out what the problem can be ...

Similar Messages

  • Brand New iPad does not turn on

    Hi,
    I just got a brand new iPad 3d + WiFi 64GB and i just can't turn it on. These are all the things I had done:
    1. Charged for 8 hours at least with the 10w charger. During the charging, the white apple logo just stay flashing on the ipad screen (about 5secs on and 10secs off).
    2. Computer up to date; Itunes latest version ; did restarts (both mac and ipad), force reset, changed several cables and tried syncing with 2 other macs and one pc, still nothing happens when ipad is connected to the computer.
    3. Without the charger, no sign of life for ipad.
      Anyone has similar issues like me and how do you resolve it?

    That stinks.  Try this:  hold down the home button and the power button at the same time for 15-20 seconds.  If you don't eventually see an Apple logo - you have a bad unit and need to take it back from where you got it.
    Good luck.

  • Brand New iPhone 4 not turning on.

    Basically the title says it all, I've plugged it into iTunes and it recognizes it as an iPhone but it makes a beeping sound every 5 seconds and still doesn't work.

    Try forcing it into recovery mode, as described in this article.  Make sure your iTunes is up to date 11.1.3
    iOS: Unable to update or restore
    I bought it from a 3rd party.
    I see, just like a brand new 2010 Toyota with 60,000 miles on it....

  • My brand new PB will not charge when in standby or when on

    I played with a number of PB's so far and finally have my own but... My brand new PB will not charge when in standby or when on; as soon as I plug the charger into the USB port it detects it and brings the screen up (if in standby) showing the lighting bolt on the battery but it does not charge; the lighting bolt stays but the % charge does not change (or hopefully increase) at all; it will actually decrease (??); the only way I can charge it is when I attach the charger and the PB is powered off… the PB brings the red (or green can't remember) LED on and starts to flash it on off and charges; tried the hard reset with no change; I am running the latest OS release 1.0.8.6067. Has anyone seen this? Is it h/w or f/w? Any Fix?

    Here's a final update on this... the units goes back to its maker or the store sometimes tomorrow... Why? First I tried to understand if this was s/w or h/w related or maybe both before calling support which in the end I did; so I did try a different charger, hard resetting the unit, discharging and recharging etc; nothing helped or fixed the charging in standby; the unit continued to charge only after being turned off and then plugged into the charger. Here's what I learned:
    1. Going through the initial setup and OS update it is quite possible for the unit to NOT load the OS image correctly i.e.  it appears that it loaded the OS and displays the OS version as if it loaded properly when in fact it did not and the image loaded is corrupt. I found this out during a live session with support when they were looking at my PC screen while the PB was connected to the PC only to point out that the Desktop Manager was showing a s/w update being available (1.0.8 bundle 6067) while the unit was reporting 1.0.0 bundle 0. Strange, I thought I already had 1.0.8.6067... after accepting the update, which takes a bit to load, I started more testing, charging, discharging, hard reset (i.e. Volume Up + Power) etc with no positive results to report. This also proved that the USB port is working, both data (PC to PB communication alright) and power (PB displays the plug over the battery bar when the power contact work)
    2. The charger I have works and it is the correct one: P/N PSM09A-050RIM; make sure it is not one of the incorrectly rated chargers some received.
    3. In order to reduce the amount of current the unit consumes when on, you have to run the Video Chat app at least once and acknowledge the (c) page; otherwise this remains as a background app that take more CPU cycles on the battery. After doing this I did notice a slight improvement in the sense that PB did charge some instead of discharging. The problem is that it only charged to about 60% and did not move higher no matter how long I waited (yes I did reset just to make sure it is not the s/w acting up and deciding to not update the power bar)
    4. The way the RIM RMA works is like this: they start the process for you to return the unit back for repair which I understand may take 10 days; you may get a unit to use for this time if so desired, it will be charged to your CC; your unit may get repaired if possible; if not possible to repair, your new unit will be replaced with a refurbished unit; once you get some unit back you need to send the “10 day replacement unit” to RIM to get your CC charge cleared. I find that this program is good for when you can not return the unit to the place you purchased it from. Otherwise it is not good as I do not like getting a refurb for something I consider brand new (not to mention that you may get a unit with a few bright or dark pixels)
    5. Throughout this process I looked at three (3) Playbooks: 2 had bright pixels and were returned immediately; this last one does not charge correctly. No win for me!
    6. The battery lasts approx 4 hours with the unit playing a video clip in a loop and WiFi on with a WEB pulled stop watch running as well (had to allow multi tasking in setup/general).
    Finally, my theory about this problem is that it is h/w related and that it is caused by the noise the board or the display is making when the unit is either on or in standby; a component not soldered properly (cold joint) or out of spec may be the culprit; for example a resistor in resistor divider monitoring the battery voltage or a decoupling capacitor missing or not soldered...

  • Brand new iMac does not work wirelessly

    This is a very strange situation and I don't know how much to be concerned about it.
    6 weeks ago I bought the first of two brand new iMacs. We have two old G4s both wired into a Netgear wireless router, plus the printer. The first new iMac when switched on, immediately found the Netgear and has worked perfectly, wirelessly, ever since. As it should.
    Less than a week ago I bought the second new iMac, which is identical to the first. I put it on the _same desk_ as the Netgear, therefore a distance of only one foot. Straight out of the box, it worked wirelessly to register itself with Apple.
    Since then, it has only worked wirelessly very intermittently, and then very slowly indeed. I was wasting far too much time trying to figure out why the wireless did not work, and eventually wired it into the router too.
    I was attempting to set up a network with 2 old G4s wired in, and 2 new iMacs wireless. Now I have 3 wired in and one wireless.
    Is there something wrong with the second brand new iMac? Or is there some line I should be pursuing with Netgear?
    I have written all the IP addresses down in case anyone responding - and I sure hope SOMEONE responds! - thinks that this may be a clue.
    Many thanks in advance to all and any replies.

    Update: I'm posting this in case it helps others......
    I phoned the software support which comes free for 90 days with a brand new iMac.
    The bright young man there instantly knew what the problem was, because he'd seen it all before. There's nothing wrong with the iMac and it has nothing to do with IP addresses.
    I have to go into the Netgear configuration screen and Enable MAC filtering. This means I'll give the router the hardware addresses of the two iMacs and it will then allow both of them to communicate wirelessly - but no other devices which might be lurking in the vicinity.
    Sounds good to me.

  • TS1702 My brand new iphone5 will not connect to my home wifi even though my ipad and old iphone do connect with no problem. What can I do?

    My brand new iphone5 will not connect to my home wifi even though it recognizes it. My ipad and my old iphone4s connect with no problem. Any thoughts?

    Although your other devices connect okay, it would be worth resetting your router by switching if off for disconnecting it from mains power for 2 minutes and then switch it on again.
    Good luck and do report back.

  • HT1430 my very new iphone5s will not turn on its as if the button no longer works is there any additonal swiping actions or hidden buttons i may have triggered accidently it is barely 2 weeks old and has no obvious signs of wear............not impressed A

    my very new iphone5s will not turn on its as if the button no longer works is there any additonal swiping actions or hidden buttons i may have triggered accidently it is barely 2 weeks old and has no obvious signs of wear............not impressed APPLE

    im hoping that by holding both the power and circle buttons it will spring back to life ..........somtimes apple you are too clever with your secert hidden butttons switches

  • Have a brand new dell. Not much on it but Premiere elements 13. Haven't used it for anything else - only 5 days old. I am in Premiere, add vid, render then poof. it says add media where those rendered files were. any help would be appreciated. thank you

    Have a brand new dell. Not much on it but Premiere elements 13. Haven't used it for anything else - only 5 days old. I am in Premiere, add vid, render then poof. it says add media where those rendered files were. any help would be appreciated. thank you

    bgar
    On what computer operating system is your Premiere Elements 13 running on?
    What are you (manually) or the project (automatically) setting as the project preset?
    (See Edit Menu/Project Settings/General and the readings for Editing Mode, Timebase, Frame Size,
    and Pixel Aspect Ratio (even if fields look grayed out).
    What are the properties of these source media, including file extension? The brand/model/settings of the camera that recorded the
    video may give us this information.
    When the source media hit the Timeline for the first time, is there an orange line over their content? Or is there
    no colored line and an orange line appears over them only after you have edited them?
    Please elaborate on "poof" after rendering the Timeline content by pressing the Render button above the Timeline content with the orange line over it.
    a. Media Offline displays?
    b. Other?
    ATR

  • Help.. brand new Ipod 80gb not being recognised by Computer or itunes

    Replaced a ipod mini that was stolen from my house with a brand new 80gb ipod. Plugged it into the same computer that had been used successfully with the mini and the ipod will not be seen by either the computer or itunes. It will charge through the usb post no problem but when you plug it in it originally came up with the windows new hardware wizard, as apple have for some misguided reason stopped supplying CD's, the wizard can not find the correct driver, and fails to install. When Itunes is running nothing appears. I have been through the 5 R's, or should I say 4 r's as the fifth rely's on itunes recognizing the ipod before you can restore, countless time, so please unless you are sure don't ask me to click the hold button on and off yet again.
    Plugged the ipod into an old laptop with USB 1.0 ports and the ipod was recognized which would suggest it is my main comp's usb ports that are at fault, but as two previous ipod mini's worked without fault I find this hard to believe. I think if only I had the correct driver to install I could solve this problem easily. Can anyone send me the correct driver for an 80gb ipod.
    It hopefully goes without saying that I have downloaded the latest itunes software and gone through all the post's on the this site. I thought I'd cracked it with the UBSSORT file post but it was not to be....to tell you the truth if it's this complicated I'd rather send it back and buy a sony mp3 or even an ipod nano. At my wits end so please help Obi one, your my only hope

    Big Big thank you to Varun at Apple Service & Support e-mailed me the following article and after following the instructions, I'm up and running. Thank you ......
    Link: http://www.info.apple.com/kbnum/n305136
    iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date

  • Brand new iPod won't turn on.

    I've recently purchased a 30GB iPod video, but it does not seem to work. I've studied the help documents to the best of my abilities and consulted friends who also own iPods, but have yet to find out how to solve my problem.
    As the subject line says, it will not turn on. It has never, since coming out of the box, been on. Any idea what is wrong with it?
    To speed things up, here are the things that I have done:
    1. Installed the companion software on a first computer (running Windows XP), then connected the iPod into every available USB port. The charging icon did not come on. The iPod was not detected anywhere on the computer.
    2. Installed the companion software on a second computer (running Windows XP), then connected the iPod into every available USB port. The charging icon did not come on. The iPod was not detected anywhere on the computer.
    3. Uninstalled and reinstalled the companion software on the first computer, retested the iPod in all USB ports, then had the same thing happen (or not happen, if you like :D).
    4. Confirmed that one of the USB ports was functional by inserting a spare mouse into it, which was detected and powered by the computer.
    5. Proceeded to insert the iPod into the tested port and waited for over an hour on the suspicion that it may simply not be working due to a lack of charge. No success.
    6. Went through the "Five R's" as best I could. Though probably futile since it has never been active, I attempted to Reset it. I believe that I've established that I've Retried, Restarted, and Removed, and of course, I don't really know how I can Restore an unused iPod that won't do so much as to activate.
    In trying all of this, I tend to get the feeling that it shouldn't be this hard. If I've overlooked some detail, it would be helpful to know it, but I feel that I've been fairly thorough in testing it. It also doesn't particularly help when most of the guides assume that my iPod will (or at least did) activate .
    I don't want to jump to conclusions, but I suspect that my iPod is defective, if you know anything that would suggest otherwise, then thanks for your help. Otherwise, thanks at least for you time and consideration.
    30GB iPod video   Windows XP  

    "XP Engergy Savings Disable USB Ports"
    I followed the steps and made sure that all of the USB ports would be enabled. I tried the iPod in two of them (one for over ten minutes). The charging signal did not come on. The screen remained blank. I followed the link at the bottom of the help page, but it took me to a document that would not help since it assumed that I could put my iPod in disk mode, which dosen't seem to work (more than likely because it needs to turn on to do this). No luck here.
    "Windows confuses iPod with a network drive"
    I followed the steps up until step five, at which point, I could go no further because it requires the iPod to show up on the Computer Management screen. Mine doesn't .
    "iPod missing in iTunes and or Windows, includes 5R's"
    There were several things here to try. I looked to see if there was an infection on the computer. I feel relatively sure that there isn't one, especially on the second computer that I had used (since it is new and has not been used on the internet for more than a few days).
    Next applicable item: system requirements. I actually have one question to ask here. Adobe Photoshop Album 2.0 is listed as required, and I don't believe that it is on either computer. What are the implications of this--will not having this software cause to iPod to fail to even display a charge icon? This seems to me like it may be the source of the problem. I had only looked at the box which did not list this software as a requirement. It feels like a little bit of a stretch (I'd expect the iPod to at least charge), but has the lack of this software been known to cause the iPod to fail to work in the same way that mine fails?
    Next applicable item: formatting for Windows. I need someone else's expertise here. Do iPods ever ship formatted for a certain type of computer? I wouldn't expent them to, be even if they do, would this create the symptoms that my iPod has? It would seem rather inflexible if an iPod couldn't do so much as to charge on an incompatible machine. I can't check how it is formatted (or if it is formatted at all) because it won't turn on. Do you feel that this area is a potential source of the problem?
    This next applicable item is "Your iPod needs service" . I'm nearly sure that this is true, but I'll wait at most a couple more days to see if anyone will be so kind as to answer these questions (and hopefully to see if I can resolve this issue). Thanks in advance.

  • My battery wont charge and my mac is brand new just says not charging will only work through charger

    the battery on my macbook air wont charge and will only work plugged into the charger its brand new only brought in july this year dont know why had to replace the charger as my son snapped the magnetic bit off it but now its saying not charging and turns off when i disconnect the charger dont know what to do as its brand new and ive only used it twice

    Try an SMC reset. See this link for instructions: http://support.apple.com/kb/ht3964

  • Please HELP!!  Brand New iMac- Won't turn on!!!!!

    Someone please help!!
    I JUST purchased a brand new iMac today, no more than 4 hours ago! I brought it home and followed the set up instructions and pressed the "power" button.
    The fan comes on- it sounds weak to me, then it slows down, the little white light at the botton right hand side comes on, but the screen remains BLACK!!! Nothing comes on my screen!!
    I am NEW to Apple, so I am CLUELESS as to why this is happening or what is going on- not to mention EXTREMELY AGGRAVATED that I cannot find any tech support AT ALL- not on the phone, not on chat, not anywhere!!! I have waited almost 2 yrs to purchase a new computer- I chose an iMac, and this is the crap I get.
    Please help!!!!
    iMac 17inch   Mac OS X (10.4.4)   New

    Dawn,
    Having suffered my share of 'difficult' products, I can understand your frustration. This is compounded by the financial restraint you exhibited for 2 years of saving. Your experience should not just be good, it should be exceptional.
    There may be something wrong with your machine. The white light is on when the machine is booting or the display is sleeping. The light will softly flash on and off while the machine is sleeping.
    The fan should be as quiet as possible, to the point of being a low rumble/whisper or not even heard. It sounds like your computer is stuck in a startup mode.
    Calling Apple will get this issue resolved to your satisfaction in a timely manner. If you state the issues they should be more than helpful. You can try a few things for now.
    Press and hold the power button on your machine for a while and see if it reboots.
    If you look on this page:
    http://docs.info.apple.com/article.html?artnum=303124
    You will notice the instructions for zapping the pram (keys held down when you press the power button and held continuously) : Press Option-Command-P-R until you hear two beeps (release)
    Try that next. Your machine should be restarting when you toggle the power button.
    Another quick thing you may want to try is shutting down the machine, unplugging everything (every cable including the power cable), waiting about 2 minutes, then plugging in just the keyboard and mouse and starting the machine with the power button.
    Good Luck,
    -j

  • Brand New Digitizer Does NOT work...

    Hello, Im using an old Plam M505 to give me information VIA diagnostics on my car, just simple text. I bought it brand new never turned on flawless, and when I went to turn it on, The digitatizer does not work. Im stuck at the very first screen "use the stylis to tap the screen and continue" I tapped it, nothing, I can power no and off and dim and brighten the screen with the power button when its plugged in, but thats it. I charged it and it doesnt turn on unless plugged in. If the battery was never used and has been sitting there for 8 years its probibaly dead huh? also would that cause my digitizer to not work? Oh also when I push the application buttons it just beeps a little. One more thing the software does not recognise it, so I cant even access it through that.   
    Post relates to: Palm m505

    Hello dsmcraze, Welcome to the Palm Support Community!
    Always the first thing to try in any PalmOS "hiccup" is a Soft Reset.  Gently press the tiny "Reset" button on the back of the device to reboot it.  No information will be lost.
    Did you fully charge the device for 3 hours before using it?  Try plugging it into the charger and tap the Reset button.  This theoretically should reset the charging circuitry that monitors the "full" level.
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • My brand new MacBook Pro wont turn on

    If you ever wondered if there's anything worse then buying a new macbook pro, waiting two weeks till you receive it only to find out that after you unbox it, slowly and carefuly, connect it to the MegaSafe Power adapter and hitting the On key it will not turn on or even respond then I can honestly say, I've never felt disappointed as I do now.
    The green LED on the power connector ain't shinin aswell.
    I've tried several power adapters, didn't make a change.
    I tried connecting a MacBook power adapter and the green LED turned on, then faded to black after about 10 seconds.
    Nothing's going on the screen when i press the power button and the power adapter seems to work properly.
    Other then slitting my wrists, what can I do? what could be the problem?

    Im currently in the middle east and bought it in Canada, then sent by xpress(air mail), so I can't do that.
    Any other suggestions?
    Repairing it frightens me, by going to a premium reseller and leaving it there for them to fix it, even if I get new hardware, do you think it will have any effect on the device?
    I don't trust them here tempering with my baby

  • Brand New C309g will not connect wirelessly with ANY wireless security options enabled

    Printer will connect via wired ethernet. I can use the http utility.
    Printer will connect via unsecured wireless connection.
    Printer defaults to autoconfig (169.xxx)when connected  via WEP (both open and shared), will not connect with a manual IP address. Cannot access http utility.
    Printer won't even autoconfig when connected via WPA-Personal - instead says "No connection found."
    Printer is in the same uncluttered room as the router.
    ALL OTHER wireless network devices work fine and keep up with security changes.
    I have legacy devices on the network that make me want to run with WEP.
    I've run the HP Network Diagnostic. It can access my router just fine. It cannot find the printer.
    Router is D-Link DIR-655.
    I jump through the right hoops - refresh router, restore factory defaults on printer, etc. All other wireless network devices work fine.
    I want to pull an "Office Space" on this brand-new printer - please save me from doing so!
    -mooi
    This question was solved.
    View Solution.

    Ooops, my mistake.  Thanks for pointing it out.
    Another idea is to make sure the firmware is updated on the router.
    Also, from the control panel of the printer: Setup > Network > Wireless Network Test.  It will self-test the printer radio.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

Maybe you are looking for