Re: Unable to use Cleanup XHTML Commands

Just got through purchasing and installing DW CS5.5; and I cannot use the Cleanup XHTML command prompt; as I receive the following error message:
What am I doing wrong? Sorry but I am a newbie at using this latest version; as we previously used DW Version 7. Thanks for any help.

> Is a recovery disk from another computer using Win7 Home Premium 64-bit usable?
Generally speaking yes BUT this second notebook must be 100% identical with same model number (PAxxxx).
> Or if not, am I left with either ordering recovery media from Toshiba, or wiping the entire HDD and installing another licensed version of Win7?
Exactly. To be honest better option is to order original Toshiba recovery disc.
You can order it under https://backupmedia.toshiba.eu/landing.aspx
For 30 euro you will have original disc that you can use anytime you want. This disc has OS with valid licence, all necessary drivers.
It is also simplest way to have all properly installed. With 5 mouse clicks and after 2 hours only notebook will have factory settings again.

Similar Messages

How can I encrypt my data links between switch uplink ports ? I'm unable to use "cts Manual" command in C3560X switch.suggest me

How can I encrypt my data uplinks between switch trunk ports ? I'm unable to use "cts Manual" command in C3560X switch.suggest me as I want to encrypt my switch-to-switch link with Cisco TrustSec.

Hi
Login to switch & go to interface..
There you can give tags.. (ISL & DONT1Q)
Command switch-port mode trunk
Switch-port trunk encapsulation ssl or dot1Q

Unable to use place command in photoshop

I am unable to use the place command in photoshop cs5.5 since upgrading to mavericks. The window pops open briefly then shuts immediately. Photoshop hangs as it is still awaiting the action to complets. The same behavior exists when attempting to add attachments to emails. Any idea what may be causing this? This only began to occur after the upgrade to mavericks.

If should work. If I read this correctly your last driver is a year old. Visit ATI site and download latest.

I want run the "Cleanup XHTML" from my command

Hi.
I try make the Dreamweaver's extension.
I want to "Cleanup XHTML" from my command. I read the document, and I programming this code.
var dom = dw.getDocumentDOM();
dom.cleanupXHTML();
but, This code can't run.
Why this reason? Please teach me.
p.s.
My English is very poor sory.

Taniguchi,
I try make the Dreamweaver's extension.
I want to "Cleanup XHTML" from my command. I read the document, and I programming this code.
var dom = dw.getDocumentDOM();
dom.cleanupXHTML();
but, This code can't run.
This API call has a required parameter:
dom.cleanupXHTML(true); // cleanup entire document
dom.cleanupXHTML(false); // cleanup selected text
The documentation in Japanese is here:
http://help.adobe.com/ja_JP/Dreamweaver/10.0_API_Ref/WS5b3ccc516d4fbf351e63e3d117f9e077ef- 7fdf.html
Randy

[SOLVED] Gnome 3.8: Unable to use Nokia N9 as a Bluetooth modem

Hi,
I'm unable to use my Nokia Any ideas on how to fix this?
Here are some log files:
Bluetooth startup from everything.log:
/> bluetoothd[382]: Bluetooth daemon 4.101
bluetoothd[382]: Starting SDP server
bluetoothd[382]: DIS cannot start: GATT is disabled
bluetoothd[382]: Failed to init deviceinfo plugin
bluetoothd[382]: Failed to init gatt_example plugin
bluetoothd[382]: Bluetooth Management interface initialized
bluetoothd[382]: bluetoothd[382]: Bluetooth Management interface initialized
bluetoothd[382]: bluetoothd[382]: Unknown command complete for opcode 1J
bluetoothd[382]: Unknown command complete for opcode 19
bluetoothd[382]: bluetoothd[382]: Adapter /org/bluez/382/hci0 has been enabled
bluetoothd[382]: Adapter /org/bluez/382/hci0 has been enabled
entries from everything.log:
/etc/gdm/Xsession[612]: Ikkunointiohjelman varoitus:Buggy client sent a _NET_ACTIVE_WINDOW message with a timestamp of 0 for 0x2800003 (Uuden Blue)
/etc/gdm/Xsession[612]: Ikkunointiohjelman varoitus:meta_window_activate called by a pager with a 0 timestamp; the pager needs to be fixed.
bluetoothd[382]: bluetoothd[382]: Discovery session 0x7f5d47491d10 with :1.58 activated
bluetoothd[382]: Discovery session 0x7f5d47491d10 with :1.58 activated
bluetoothd[382]: bluetoothd[382]: Stopping discovery
bluetoothd[382]: Stopping discovery
kernel: [ 1179.820342] usb 2-1: reset high-speed USB device number 2 using ehci-pci
dbus-daemon[396]: dbus[396]: [system] Rejected send message, 3 matched rules; type="method_return", sender=":1.58" (uid=1000 pid=1082 comm="bluetooth-wizard ") interface="(unset)" member="(unset)" error name="(unset)" requested_reply="0" destination=":1.4" (uid=0 pid=382 comm="/usr/lib/bluetooth/bluetoothd -n ")
bluetoothd[382]: bluetoothd[382]: input-headset driver probe failed for device 40:98:4E:65:A1:00
bluetoothd[382]: input-headset driver probe failed for device 40:98:4E:65:A1:00
pulseaudio[678]: [pulseaudio] bluetooth-util.c: org.bluez.AudioSource.GetProperties() failed: org.freedesktop.DBus.Error.UnknownMethod: Method "GetProperties" with signature "" on interface "org.bluez.AudioSource" doesn't exist
pulseaudio[678]: [pulseaudio] bluetooth-util.c: org.bluez.HandsfreeGateway.GetProperties() failed: org.freedesktop.DBus.Error.UnknownMethod: Method "GetProperties" with signature "" on interface "org.bluez.HandsfreeGateway" doesn't exist
pulseaudio[678]: [pulseaudio] bluetooth-util.c: org.bluez.HandsfreeGateway.GetProperties() failed: org.freedesktop.DBus.Error.UnknownMethod: Method "GetProperties" with signature "" on interface "org.bluez.HandsfreeGateway" doesn't exist
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 SyncMLClient
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 DialupNetworking
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 OBEXObjectPush
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 OBEXFileTransfer
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 AudioSource
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 A/V_RemoteControlTarget
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 A/V_RemoteControl
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 Headset_-_AG
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 HandsfreeAudioGateway
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 Phonebook_Access_-_PSE
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 SyncMLClient
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 DialupNetworking
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 OBEXObjectPush
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 OBEXFileTransfer
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 AudioSource
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 A/V_RemoteControlTarget
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 A/V_RemoteControl
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 Headset_-_AG
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 HandsfreeAudioGateway
/etc/gdm/Xsession[612]: ** Message: has_config_widget 40:98:4E:65:A1:00 Phonebook_Access_-_PSE
/etc/gdm/Xsession[612]: ** Message: Default Bluetooth adapter is powered
/etc/gdm/Xsession[612]: ** Message: dun_start: starting DUN device discovery...
/etc/gdm/Xsession[612]: ** Message: Tutkitaan puhelimen asetuksia…
/etc/gdm/Xsession[612]: ** Message: dun_start: calling Connect...
/etc/gdm/Xsession[612]: ** Message: dun_start: waiting for Connect success...
/etc/gdm/Xsession[612]: ** Message: dun_connect_cb: processing Connect reply
/etc/gdm/Xsession[612]: ** Message: dun_connect_cb: new rfcomm interface '/dev/rfcomm0'
/etc/gdm/Xsession[612]: ** Message: dun_connect_cb: finished
upowerd[506]: (upowerd:506): UPower-Linux-WARNING **: unhandled action 'move' on /sys/devices/pci0000:00/0000:00:13.1/usb6/6-3/6-3:1.0/bluetooth/hci0/hci0:21/rfcomm0
kernel: [ 1212.925984] Bluetooth: TIOCGSERIAL is not supported
kernel: [ 1214.790844] Bluetooth: TIOCGSERIAL is not supported
kernel: [ 1214.791357] Bluetooth: TIOCGSERIAL is not supported
ModemManager[457]: <info> Creating modem with plugin 'Nokia' and '1' ports
kernel: [ 1215.816882] Bluetooth: TIOCGSERIAL is not supported
ModemManager[457]: <info> Modem for device at '/sys/devices/pci0000:00/0000:00:13.1/usb6/6-3' successfully created
kernel: [ 1215.820679] Bluetooth: TIOCGSERIAL is not supported
ModemManager[457]: <info> Modem: state changed (unknown -> disabled)
kernel: [ 1216.873341] Bluetooth: TIOCGSERIAL is not supported
/etc/gdm/Xsession[612]: ** Message: modem_object_added: (/org/freedesktop/ModemManager1/Modem/0) modem found
/etc/gdm/Xsession[612]: ** Message: start_wizard: (/org/freedesktop/ModemManager1/Modem/0) starting the mobile wizard
NetworkManager[387]: <info> ignoring modem 'rfcomm0' (no associated Bluetooth device)
/etc/gdm/Xsession[612]: ** Message: wizard_done_cb: mobile wizard done
/etc/gdm/Xsession[612]: ** Message: wizard_done_cb: adding new setting
/etc/gdm/Xsession[612]: ** Message: wizard_done_cb: waiting for add connection result...
NetworkManager[387]: <info> BT device Nokia N9 (40:98:4E:65:A1:00) added (DUN)
NetworkManager[387]: <info> (40:98:4E:65:A1:00): new Bluetooth device (driver: 'bluez' ifindex: 0)
NetworkManager[387]: <info> (40:98:4E:65:A1:00): exported as /org/freedesktop/NetworkManager/Devices/1
NetworkManager[387]: <info> (40:98:4E:65:A1:00): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
NetworkManager[387]: <info> (40:98:4E:65:A1:00): deactivating device (reason 'managed') [2]
NetworkManager[387]: <info> (40:98:4E:65:A1:00): device state change: unavailable -> disconnected (reason 'none') [20 30 0]
/etc/gdm/Xsession[612]: ** Message: Puhelimesi on nyt valmis käyttöön.
upowerd[506]: (upowerd:506): UPower-Linux-WARNING **: unhandled action 'move' on /sys/devices/virtual/tty/rfcomm0
dbus-daemon[396]: dbus[396]: [system] Rejected send message, 2 matched rules; type="method_return", sender=":1.4" (uid=0 pid=382 comm="/usr/lib/bluetooth/bluetoothd -n ") interface="(unset)" member="(unset)" error name="(unset)" requested_reply="0" destination=":1.59" (uid=1000 pid=1082 comm="bluetooth-wizard ")
NetworkManager[387]: <info> (eth0): device state change: activated -> disconnected (reason 'user-requested') [100 30 39]
NetworkManager[387]: <info> (eth0): deactivating device (reason 'user-requested') [39]
avahi-daemon[392]: Withdrawing address record for 192.168.0.222 on eth0.
avahi-daemon[392]: Leaving mDNS multicast group on interface eth0.IPv4 with address 192.168.0.222.
avahi-daemon[392]: Interface eth0.IPv4 no longer relevant for mDNS.
dbus-daemon[396]: dbus[396]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service'
dbus[396]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service'
systemd[1]: Starting Network Manager Script Dispatcher Service...
dbus-daemon[396]: dbus[396]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
dbus[396]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
systemd[1]: Started Network Manager Script Dispatcher Service.
NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) starting connection 'Dna connection'
NetworkManager[387]: <info> (40:98:4E:65:A1:00): device state change: disconnected -> prepare (reason 'none') [30 40 0]
NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 1 of 5 (Device Prepare) scheduled...
NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 1 of 5 (Device Prepare) started...
NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 2 of 5 (Device Configure) scheduled...
NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 1 of 5 (Device Prepare) complete.
NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 2 of 5 (Device Configure) starting...
NetworkManager[387]: <info> (40:98:4E:65:A1:00): device state change: prepare -> config (reason 'none') [40 50 0]
NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 2 of 5 (Device Configure) complete.
NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00 40:98:4E:65:A1:00/bluetooth) Stage 2 of 5 (Device Configure) successful. Will connect via DUN.
NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00/bluetooth) Stage 2 of 5 (Device Configure) waiting for modem to appear.
upowerd[506]: (upowerd:506): UPower-Linux-WARNING **: unhandled action 'move' on /sys/devices/pci0000:00/0000:00:13.1/usb6/6-3/6-3:1.0/bluetooth/hci0/hci0:21/rfcomm0
NetworkManager[387]: <info> (40:98:4E:65:A1:00): device state change: config -> failed (reason 'modem-not-found') [50 120 43]
NetworkManager[387]: <warn> Activation (40:98:4E:65:A1:00) failed for connection 'Dna connection'
NetworkManager[387]: <info> (40:98:4E:65:A1:00): device state change: failed -> disconnected (reason 'none') [120 30 0]
NetworkManager[387]: <info> (40:98:4E:65:A1:00): deactivating device (reason 'none') [0]
upowerd[506]: (upowerd:506): UPower-Linux-WARNING **: unhandled action 'move' on /sys/devices/virtual/tty/rfcomm0
dbus-daemon[396]: dbus[396]: [system] Rejected send message, 7 matched rules; type="method_return", sender=":1.4" (uid=0 pid=382 comm="/usr/lib/bluetooth/bluetoothd -n ") interface="(unset)" member="(unset)" error name="(unset)" requested_reply="0" destination=":1.8" (uid=0 pid=387 comm="/usr/bin/NetworkManager --no-daemon ")
/> systemd[1]: Mounting Arbitrary Executable File Formats File System...
systemd-sysctl[132]: Duplicate assignment of kernel/sysrq in file '/usr/lib/sysctl.d/50-default.conf', ignoring.
systemd[1]: Started Apply Kernel Variables.
systemd[1]: Started udev Coldplug all Devices.
systemd-modules-load[138]: Inserted module 'fuse'
systemd[1]: Started Create static device nodes in /dev.
systemd[1]: Starting udev Kernel Device Manager...
systemd[1]: Started udev Kernel Device Manager.
systemd[1]: Mounted Arbitrary Executable File Formats File System.
systemd[1]: Mounted Debug File System.
0.000000] Initializing cgroup subsys cpuset
0.000000] Initializing cgroup subsys cpu
0.000000] Linux version 3.9.5-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.1 (GCC) ) #1 SMP PREEMPT Sat Jun 8 09:22:45 CEST 2013
0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=90b0c2df-9b19-4c19-91ce-5479b086da4d ro quiet
0.000000] e820: BIOS-provided physical RAM map:
0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cfdeffff] usable
0.000000] BIOS-e820: [mem 0x00000000cfdf0000-0x00000000cfdf2fff] ACPI NVS
syslog-ng[390]: syslog-ng starting up; version='3.4.1'
systemd[1]: Mounted Huge Pages File System.
0.000000] BIOS-e820: [mem 0x00000000cfdf3000-0x00000000cfdfffff] ACPI data
0.000000] BIOS-e820: [mem 0x00000000cfe00000-0x00000000cfefffff] reserved
0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000032fffffff] usable
0.000000] NX (Execute Disable) protection: active
0.000000] SMBIOS 2.4 present.
0.000000] DMI: Gigabyte Technology Co., Ltd. GA-MA790XT-UD4P/GA-MA790XT-UD4P, BIOS F8g 07/12/2010
0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
0.000000] No AGP bridge found
0.000000] e820: last_pfn = 0x330000 max_arch_pfn = 0x400000000
0.000000] MTRR default type: uncachable
0.000000] MTRR fixed ranges enabled:
0.000000] 00000-9FFFF write-back
0.000000] A0000-BFFFF uncachable
0.000000] C0000-C7FFF write-protect
0.000000] C8000-FFFFF uncachable
0.000000] MTRR variable ranges enabled:
0.000000] 0 base 000000000000 mask FFFF80000000 write-back
0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
0.000000] 3 base 0000CFE00000 mask FFFFFFE00000 uncachable
0.000000] 4 base 000100000000 mask FFFF00000000 write-back
0.000000] 5 base 000200000000 mask FFFF00000000 write-back
0.000000] 6 base 000300000000 mask FFFFE0000000 write-back
0.000000] 7 base 000320000000 mask FFFFF0000000 write-back
0.000000] TOM2: 0000000330000000 aka 13056M
0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
0.000000] e820: update [mem 0xcfe00000-0xffffffff] usable ==> reserved
0.000000] e820: last_pfn = 0xcfdf0 max_arch_pfn = 0x400000000
0.000000] found SMP MP-table at [mem 0x000f5440-0x000f544f] mapped at [ffff8800000f5440]
0.000000] Scanning 1 areas for low memory corruption
0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
0.000000] Using GB pages for direct mapping
0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
0.000000] [mem 0x00000000-0x000fffff] page 4k
0.000000] BRK [0x01b30000, 0x01b30fff] PGTABLE
0.000000] BRK [0x01b31000, 0x01b31fff] PGTABLE
0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
0.000000] init_memory_mapping: [mem 0x32fe00000-0x32fffffff]
0.000000] [mem 0x32fe00000-0x32fffffff] page 2M
0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
0.000000] init_memory_mapping: [mem 0x32c000000-0x32fdfffff]
0.000000] [mem 0x32c000000-0x32fdfffff] page 2M
0.000000] init_memory_mapping: [mem 0x300000000-0x32bffffff]
0.000000] [mem 0x300000000-0x32bffffff] page 2M
0.000000] init_memory_mapping: [mem 0x00100000-0xcfdeffff]
0.000000] [mem 0x00100000-0x001fffff] page 4k
0.000000] [mem 0x00200000-0x3fffffff] page 2M
0.000000] [mem 0x40000000-0xbfffffff] page 1G
0.000000] [mem 0xc0000000-0xcfbfffff] page 2M
0.000000] [mem 0xcfc00000-0xcfdeffff] page 4k
0.000000] init_memory_mapping: [mem 0x100000000-0x2ffffffff]
0.000000] [mem 0x100000000-0x2ffffffff] page 1G
0.000000] RAMDISK: [mem 0x378a4000-0x37c49fff]
0.000000] ACPI: RSDP 00000000000f6e70 00014 (v00 GBT )
0.000000] ACPI: RSDT 00000000cfdf3000 00038 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
0.000000] ACPI: FACP 00000000cfdf3040 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
0.000000] ACPI: DSDT 00000000cfdf30c0 0725F (v01 GBT GBTUACPI 00001000 MSFT 03000000)
0.000000] ACPI: FACS 00000000cfdf0000 00040
0.000000] ACPI: SSDT 00000000cfdfa400 008F5 (v01 PTLTD POWERNOW 00000001 LTP 00000001)
0.000000] ACPI: HPET 00000000cfdfad00 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
0.000000] ACPI: MCFG 00000000cfdfad40 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
0.000000] ACPI: APIC 00000000cfdfa340 000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
0.000000] ACPI: Local APIC address 0xfee00000
0.000000] Scanning NUMA topology in Northbridge 24
0.000000] No NUMA configuration found
0.000000] Faking a node at [mem 0x0000000000000000-0x000000032fffffff]
0.000000] Initmem setup node 0 [mem 0x00000000-0x32fffffff]
0.000000] NODE_DATA [mem 0x32fff9000-0x32fffdfff]
0.000000] [ffffea0000000000-ffffea000cbfffff] PMD -> [ffff880323600000-ffff88032f5fffff] on node 0
0.000000] Zone ranges:
0.000000] DMA [mem 0x00001000-0x00ffffff]
0.000000] DMA32 [mem 0x01000000-0xffffffff]
0.000000] Normal [mem 0x100000000-0x32fffffff]
0.000000] Movable zone start for each node
0.000000] Early memory node ranges
0.000000] node 0: [mem 0x00001000-0x0009efff]
0.000000] node 0: [mem 0x00100000-0xcfdeffff]
0.000000] node 0: [mem 0x100000000-0x32fffffff]
0.000000] On node 0 totalpages: 3145102
0.000000] DMA zone: 64 pages used for memmap
0.000000] DMA zone: 21 pages reserved
0.000000] DMA zone: 3998 pages, LIFO batch:0
0.000000] DMA32 zone: 13240 pages used for memmap
0.000000] DMA32 zone: 847344 pages, LIFO batch:31
0.000000] Normal zone: 35840 pages used for memmap
0.000000] Normal zone: 2293760 pages, LIFO batch:31
0.000000] ACPI: PM-Timer IO Port: 0x4008
0.000000] ACPI: Local APIC address 0xfee00000
0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
0.000000] ACPI: IRQ0 used by override.
0.000000] ACPI: IRQ2 used by override.
0.000000] ACPI: IRQ9 used by override.
0.000000] Using ACPI (MADT) for SMP configuration information
0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
0.000000] smpboot: Allowing 8 CPUs, 5 hotplug CPUs
0.000000] nr_irqs_gsi: 40
0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
0.000000] PM: Registered nosave memory: 00000000cfdf0000 - 00000000cfdf3000
0.000000] PM: Registered nosave memory: 00000000cfdf3000 - 00000000cfe00000
0.000000] PM: Registered nosave memory: 00000000cfe00000 - 00000000cff00000
0.000000] PM: Registered nosave memory: 00000000cff00000 - 00000000e0000000
0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
0.000000] e820: [mem 0xcff00000-0xdfffffff] available for PCI devices
0.000000] Booting paravirtualized kernel on bare hardware
0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
0.000000] PERCPU: Embedded 28 pages/cpu @ffff88032fc00000 s85824 r8192 d20672 u262144
0.000000] pcpu-alloc: s85824 r8192 d20672 u262144 alloc=1*2097152
0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3095937
0.000000] Policy zone: Normal
0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=90b0c2df-9b19-4c19-91ce-5479b086da4d ro quiet
0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
0.000000] __ex_table already sorted, skipping sort
0.000000] Checking aperture...
0.000000] No AGP bridge found
0.000000] Node 0: aperture @ c4000000 size 32 MB
0.000000] Aperture pointing to e820 RAM. Ignoring.
0.000000] Your BIOS doesn't leave a aperture memory hole
0.000000] Please enable the IOMMU option in the BIOS setup
0.000000] This costs you 64 MB of RAM
0.000000] Mapping aperture over 65536 KB of RAM @ c4000000
0.000000] PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000
0.000000] Memory: 12235744k/13369344k available (4984k kernel code, 788936k absent, 344664k reserved, 3966k data, 1092k init)
0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
0.000000] Preemptible hierarchical RCU implementation.
0.000000] RCU dyntick-idle grace-period acceleration is enabled.
0.000000] Dump stacks of tasks blocking RCU-preempt GP.
0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
0.000000] NR_IRQS:4352 nr_irqs:744 16
0.000000] spurious 8259A interrupt: IRQ7.
0.000000] Console: colour dummy device 80x25
0.000000] console [tty0] enabled
0.000000] allocated 50331648 bytes of page_cgroup
0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
0.000000] hpet clockevent registered
0.003333] tsc: Fast TSC calibration using PIT
0.006666] tsc: Detected 2812.672 MHz processor
0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5627.73 BogoMIPS (lpj=9375573)
0.000006] pid_max: default: 32768 minimum: 301
0.000035] Security Framework initialized
0.000041] AppArmor: AppArmor disabled by boot time parameter
0.000892] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
0.005505] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
0.007582] Mount-cache hash table entries: 256
0.007774] Initializing cgroup subsys cpuacct
0.007776] Initializing cgroup subsys memory
0.007786] Initializing cgroup subsys devices
0.007787] Initializing cgroup subsys freezer
0.007789] Initializing cgroup subsys net_cls
0.007790] Initializing cgroup subsys blkio
0.007813] tseg: 00cff00000
0.007816] CPU: Physical Processor ID: 0
0.007817] CPU: Processor Core ID: 0
0.007818] mce: CPU supports 6 MCE banks
0.007823] LVT offset 0 assigned for vector 0xf9
0.007828] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
0.007828] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64
0.007828] tlb_flushall_shift: 4
0.007908] Freeing SMP alternatives: 20k freed
0.008523] ACPI: Core revision 20130117
0.010353] ACPI: All ACPI Tables successfully acquired
0.042664] ftrace: allocating 19546 entries in 77 pages
0.399338] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
0.432338] smpboot: CPU0: AMD Phenom(tm) II X3 720 Processor (fam: 10, model: 04, stepping: 02)
0.535738] Performance Events: AMD PMU driver.
0.535742] ... version: 0
0.535743] ... bit width: 48
0.535744] ... generic registers: 4
0.535745] ... value mask: 0000ffffffffffff
0.535746] ... max period: 00007fffffffffff
0.535746] ... fixed-purpose events: 0
0.535747] ... event mask: 000000000000000f
0.565797] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
0.572465] smpboot: Booting Node 0, Processors #1 #2
0.602275] Brought up 3 CPUs
0.602279] smpboot: Total of 3 processors activated (16882.19 BogoMIPS)
0.605948] devtmpfs: initialized
0.608503] PM: Registering ACPI NVS region [mem 0xcfdf0000-0xcfdf2fff] (12288 bytes)
0.609303] RTC time: 21:44:15, date: 06/16/13
0.609349] NET: Registered protocol family 16
0.609448] node 0 link 0: io port [b000, ffff]
0.609451] TOM: 00000000d0000000 aka 3328M
0.609453] Fam 10h mmconf [mem 0xe0000000-0xe00fffff]
0.609455] node 0 link 0: mmio [a0000, bffff]
0.609457] node 0 link 0: mmio [d0000000, dfffffff]
0.609459] node 0 link 0: mmio [f0000000, fe02ffff]
0.609460] node 0 link 0: mmio [e0000000, e04fffff] ==> [e0100000, e04fffff]
0.609462] TOM2: 0000000330000000 aka 13056M
0.609464] bus: [bus 00-04] on node 0 link 0
0.609466] bus: 00 [io 0x0000-0xffff]
0.609467] bus: 00 [mem 0x000a0000-0x000bffff]
0.609468] bus: 00 [mem 0xd0000000-0xdfffffff]
0.609469] bus: 00 [mem 0xe0500000-0xffffffff]
0.609470] bus: 00 [mem 0xe0100000-0xe04fffff]
0.609471] bus: 00 [mem 0x330000000-0xfcffffffff]
0.609498] ACPI: bus type PCI registered
0.609552] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
0.609554] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
0.617921] PCI: Using configuration type 1 for base access
0.618123] mtrr: your CPUs had inconsistent variable MTRR settings
0.618124] mtrr: probably your BIOS does not setup all CPUs.
0.618125] mtrr: corrected configuration.
0.618516] bio: create slab <bio-0> at 0
0.618576] ACPI: Added _OSI(Module Device)
0.618577] ACPI: Added _OSI(Processor Device)
0.618578] ACPI: Added _OSI(3.0 _SCP Extensions)
0.618580] ACPI: Added _OSI(Processor Aggregator Device)
0.619096] ACPI: EC: Look up EC in DSDT
0.623380] ACPI: Interpreter enabled
0.623389] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130117/hwxface-568)
0.623394] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130117/hwxface-568)
0.623403] ACPI: (supports S0 S3 S4 S5)
0.623405] ACPI: Using IOAPIC for interrupt routing
0.623473] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
0.637118] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
0.637201] PCI host bridge to bus 0000:00
0.637204] pci_bus 0000:00: root bus resource [bus 00-ff]
0.637207] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
0.637209] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
0.637210] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
0.637212] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
0.637214] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfebfffff]
0.637223] pci 0000:00:00.0: [1002:5958] type 00 class 0x060000
0.637234] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
0.637312] pci 0000:00:02.0: [1002:5978] type 01 class 0x060400
0.637342] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
0.637366] pci 0000:00:02.0: System wakeup disabled by ACPI
0.637399] pci 0000:00:04.0: [1002:597a] type 01 class 0x060400
0.637428] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
0.637453] pci 0000:00:04.0: System wakeup disabled by ACPI
0.637485] pci 0000:00:0a.0: [1002:597f] type 01 class 0x060400
0.637514] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
0.637542] pci 0000:00:0a.0: System wakeup disabled by ACPI
0.637581] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f
0.637600] pci 0000:00:11.0: reg 10: [io 0xff00-0xff07]
0.637609] pci 0000:00:11.0: reg 14: [io 0xfe00-0xfe03]
0.637618] pci 0000:00:11.0: reg 18: [io 0xfd00-0xfd07]
0.637627] pci 0000:00:11.0: reg 1c: [io 0xfc00-0xfc03]
0.637636] pci 0000:00:11.0: reg 20: [io 0xfb00-0xfb0f]
0.637645] pci 0000:00:11.0: reg 24: [mem 0xfe02f000-0xfe02f3ff]
0.637664] pci 0000:00:11.0: set SATA to AHCI mode
0.637736] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
0.637749] pci 0000:00:12.0: reg 10: [mem 0xfe02e000-0xfe02efff]
0.637811] pci 0000:00:12.0: System wakeup disabled by ACPI
0.637840] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
0.637853] pci 0000:00:12.1: reg 10: [mem 0xfe02d000-0xfe02dfff]
0.637916] pci 0000:00:12.1: System wakeup disabled by ACPI
0.637948] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
0.637966] pci 0000:00:12.2: reg 10: [mem 0xfe02c000-0xfe02c0ff]
0.638046] pci 0000:00:12.2: supports D1 D2
0.638047] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
0.638065] pci 0000:00:12.2: System wakeup disabled by ACPI
0.638099] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
0.638112] pci 0000:00:13.0: reg 10: [mem 0xfe02b000-0xfe02bfff]
0.638178] pci 0000:00:13.0: System wakeup disabled by ACPI
0.638205] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
0.638217] pci 0000:00:13.1: reg 10: [mem 0xfe02a000-0xfe02afff]
0.638282] pci 0000:00:13.1: System wakeup disabled by ACPI
0.638316] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
0.638334] pci 0000:00:13.2: reg 10: [mem 0xfe029000-0xfe0290ff]
0.638414] pci 0000:00:13.2: supports D1 D2
0.638415] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
0.638436] pci 0000:00:13.2: System wakeup disabled by ACPI
0.638472] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
0.638587] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
0.638602] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
0.638611] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
0.638620] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
0.638629] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
0.638638] pci 0000:00:14.1: reg 20: [io 0xfa00-0xfa0f]
0.638722] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
0.638743] pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit]
0.638806] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
0.638830] pci 0000:00:14.2: System wakeup disabled by ACPI
0.638857] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
0.638963] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
0.639012] pci 0000:00:14.4: System wakeup disabled by ACPI
0.639040] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
0.639053] pci 0000:00:14.5: reg 10: [mem 0xfe028000-0xfe028fff]
0.639119] pci 0000:00:14.5: System wakeup disabled by ACPI
0.639151] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
0.639203] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
0.639254] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
0.639305] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
0.639358] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
0.639454] pci 0000:01:00.0: [1002:94b3] type 00 class 0x030000
0.639466] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
0.639475] pci 0000:01:00.0: reg 18: [mem 0xfdee0000-0xfdeeffff 64bit]
0.639482] pci 0000:01:00.0: reg 20: [io 0xee00-0xeeff]
0.639493] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
0.639520] pci 0000:01:00.0: supports D1 D2
0.639554] pci 0000:01:00.1: [1002:aa38] type 00 class 0x040300
0.639566] pci 0000:01:00.1: reg 10: [mem 0xfdefc000-0xfdefffff 64bit]
0.639616] pci 0000:01:00.1: supports D1 D2
0.648955] pci 0000:00:02.0: PCI bridge to [bus 01]
0.648960] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
0.648963] pci 0000:00:02.0: bridge window [mem 0xfde00000-0xfdefffff]
0.648966] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
0.649016] pci 0000:02:00.0: [197b:2363] type 00 class 0x010185
0.649081] pci 0000:02:00.0: reg 24: [mem 0xfddfe000-0xfddfffff]
0.649130] pci 0000:02:00.0: PME# supported from D3hot
0.649179] pci 0000:02:00.1: [197b:2363] type 00 class 0x010185
0.649197] pci 0000:02:00.1: reg 10: [io 0xdf00-0xdf07]
0.649207] pci 0000:02:00.1: reg 14: [io 0xde00-0xde03]
0.649217] pci 0000:02:00.1: reg 18: [io 0xdd00-0xdd07]
0.649227] pci 0000:02:00.1: reg 1c: [io 0xdc00-0xdc03]
0.649237] pci 0000:02:00.1: reg 20: [io 0xdb00-0xdb0f]
0.649319] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
0.649326] pci 0000:00:04.0: PCI bridge to [bus 02]
0.649329] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
0.649331] pci 0000:00:04.0: bridge window [mem 0xfdd00000-0xfddfffff]
0.649334] pci 0000:00:04.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
0.649377] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
0.649389] pci 0000:03:00.0: reg 10: [io 0xce00-0xceff]
0.649408] pci 0000:03:00.0: reg 18: [mem 0xfdfff000-0xfdffffff 64bit pref]
0.649421] pci 0000:03:00.0: reg 20: [mem 0xfdfe0000-0xfdfeffff 64bit pref]
0.649430] pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
0.649474] pci 0000:03:00.0: supports D1 D2
0.649475] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
0.658954] pci 0000:00:0a.0: PCI bridge to [bus 03]
0.658959] pci 0000:00:0a.0: bridge window [io 0xc000-0xcfff]
0.658961] pci 0000:00:0a.0: bridge window [mem 0xfd900000-0xfd9fffff]
0.658964] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
0.659008] pci 0000:04:06.0: [1131:7146] type 00 class 0x048000
0.659025] pci 0000:04:06.0: reg 10: [mem 0xfdbff000-0xfdbff1ff]
0.659127] pci 0000:04:07.0: [9710:9805] type 00 class 0x078000
0.659143] pci 0000:04:07.0: reg 10: [io 0xbf00-0xbf07]
0.659155] pci 0000:04:07.0: reg 14: [io 0xbe00-0xbe07]
0.659167] pci 0000:04:07.0: reg 18: [io 0xbd00-0xbd07]
0.659179] pci 0000:04:07.0: reg 1c: [io 0xbc00-0xbc07]
0.659190] pci 0000:04:07.0: reg 20: [io 0xbb00-0xbb07]
0.659202] pci 0000:04:07.0: reg 24: [io 0xba00-0xba0f]
0.659264] pci 0000:04:0e.0: [104c:8024] type 00 class 0x0c0010
0.659286] pci 0000:04:0e.0: reg 10: [mem 0xfdbfe000-0xfdbfe7ff]
0.659298] pci 0000:04:0e.0: reg 14: [mem 0xfdbf8000-0xfdbfbfff]
0.659387] pci 0000:04:0e.0: supports D1 D2
0.659389] pci 0000:04:0e.0: PME# supported from D0 D1 D2 D3hot
0.659445] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
0.659449] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff]
0.659453] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff]
0.659457] pci 0000:00:14.4: bridge window [mem 0xfda00000-0xfdafffff pref]
0.659458] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
0.659460] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
0.659462] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
0.659463] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
0.659465] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xfebfffff] (subtractive decode)
0.659479] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
0.659481] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
0.659908] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
0.659945] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
0.659979] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
0.660012] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
0.660045] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
0.660078] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
0.660111] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
0.660144] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
0.660468] acpi root: \_SB_.PCI0 notify handler is installed
0.660494] Found 1 acpi root devices
0.660564] ACPI: No dock devices found.
0.660640] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
0.660643] vgaarb: loaded
0.660644] vgaarb: bridge control possible 0000:01:00.0
0.660676] PCI: Using ACPI for IRQ routing
0.668997] PCI: pci_cache_line_size set to 64 bytes
0.669004] pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
0.669070] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
0.669071] e820: reserve RAM buffer [mem 0xcfdf0000-0xcfffffff]
0.669150] NetLabel: Initializing
0.669151] NetLabel: domain hash size = 128
0.669152] NetLabel: protocols = UNLABELED CIPSOv4
0.669161] NetLabel: unlabeled traffic allowed by default
0.669177] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
0.669180] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
0.671205] Switching to clocksource hpet
0.674983] pnp: PnP ACPI init
0.674994] ACPI: bus type PNP registered
0.675058] system 00:00: [io 0x04d0-0x04d1] has been reserved
0.675060] system 00:00: [io 0x0220-0x0225] has been reserved
0.675062] system 00:00: [io 0x0290-0x0294] has been reserved
0.675065] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
0.675512] pnp 00:01: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
0.675535] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
0.675543] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:03:00.0 BAR 6 [mem 0x00000000-0x0000ffff pref]
0.675575] system 00:01: [io 0x4100-0x411f] has been reserved
0.675578] system 00:01: [io 0x0228-0x022f] has been reserved
0.675580] system 00:01: [io 0x040b] has been reserved
0.675581] system 00:01: [io 0x04d6] has been reserved
0.675583] system 00:01: [io 0x0c00-0x0c01] has been reserved
0.675585] system 00:01: [io 0x0c14] has been reserved
0.675586] system 00:01: [io 0x0c50-0x0c52] has been reserved
0.675588] system 00:01: [io 0x0c6c-0x0c6d] has been reserved
0.675589] system 00:01: [io 0x0c6f] has been reserved
0.675591] system 00:01: [io 0x0cd0-0x0cd1] has been reserved
0.675593] system 00:01: [io 0x0cd2-0x0cd3] has been reserved
0.675594] system 00:01: [io 0x0cd4-0x0cdf] has been reserved
0.675596] system 00:01: [io 0x4000-0x40fe] has been reserved
0.675597] system 00:01: [io 0x4210-0x4217] has been reserved
0.675599] system 00:01: [io 0x0b00-0x0b0f] has been reserved
0.675601] system 00:01: [io 0x0b10-0x0b1f] has been reserved
0.675602] system 00:01: [io 0x0b20-0x0b3f] has been reserved
0.675604] system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved
0.675608] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
0.675676] pnp 00:02: [dma 4]
0.675693] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
0.675740] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
0.675772] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
0.675791] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
0.675815] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
0.676004] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
0.676006] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
0.676106] pnp 00:08: disabling [mem 0x000cfe00-0x000cffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
0.676108] pnp 00:08: disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
0.676110] pnp 00:08: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
0.676112] pnp 00:08: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
0.676114] pnp 00:08: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
0.676117] pnp 00:08: disabling [mem 0x00100000-0xcfdeffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
0.676153] system 00:08: [mem 0xcfdf0000-0xcfdfffff] could not be reserved
0.676155] system 00:08: [mem 0xffff0000-0xffffffff] has been reserved
0.676157] system 00:08: [mem 0xcfe00000-0xcfefffff] has been reserved
0.676159] system 00:08: [mem 0xcff00000-0xcfffffff] could not be reserved
0.676161] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
0.676162] system 00:08: [mem 0xfee00000-0xfee00fff] could not be reserved
0.676164] system 00:08: [mem 0xfff80000-0xfffeffff] has been reserved
0.676166] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
0.676180] pnp: PnP ACPI: found 9 devices
0.676182] ACPI: bus type PNP unregistered
0.682550] pci 0000:01:00.0: BAR 6: assigned [mem 0xfde00000-0xfde1ffff pref]
0.682553] pci 0000:00:02.0: PCI bridge to [bus 01]
0.682556] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
0.682558] pci 0000:00:02.0: bridge window [mem 0xfde00000-0xfdefffff]
0.682561] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
0.682564] pci 0000:00:04.0: PCI bridge to [bus 02]
0.682566] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
0.682568] pci 0000:00:04.0: bridge window [mem 0xfdd00000-0xfddfffff]
0.682570] pci 0000:00:04.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
0.682574] pci 0000:03:00.0: BAR 6: assigned [mem 0xfdf00000-0xfdf0ffff pref]
0.682575] pci 0000:00:0a.0: PCI bridge to [bus 03]
0.682577] pci 0000:00:0a.0: bridge window [io 0xc000-0xcfff]
0.682579] pci 0000:00:0a.0: bridge window [mem 0xfd900000-0xfd9fffff]
0.682582] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
0.682585] pci 0000:00:14.4: PCI bridge to [bus 04]
0.682587] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff]
0.682592] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff]
0.682595] pci 0000:00:14.4: bridge window [mem 0xfda00000-0xfdafffff pref]
0.682771] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
0.682772] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
0.682774] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
0.682775] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
0.682777] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xfebfffff]
0.682779] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
0.682780] pci_bus 0000:01: resource 1 [mem 0xfde00000-0xfdefffff]
0.682782] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
0.682784] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
0.682785] pci_bus 0000:02: resource 1 [mem 0xfdd00000-0xfddfffff]
0.682787] pci_bus 0000:02: resource 2 [mem 0xfdc00000-0xfdcfffff 64bit pref]
0.682788] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
0.682790] pci_bus 0000:03: resource 1 [mem 0xfd900000-0xfd9fffff]
0.682791] pci_bus 0000:03: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
0.682793] pci_bus 0000:04: resource 0 [io 0xb000-0xbfff]
0.682795] pci_bus 0000:04: resource 1 [mem 0xfdb00000-0xfdbfffff]
0.682796] pci_bus 0000:04: resource 2 [mem 0xfda00000-0xfdafffff pref]
0.682798] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
0.682799] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]

I managed to get my wired connection back and updated my system. After that (and a reboot), NetworkManager started to mysteriously work.
Here are the relevant parts from journald's log:
kesä 17 17:47:40 sunnydale dbus-daemon[396]: dbus[396]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service'
kesä 17 17:47:40 sunnydale dbus[396]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service'
kesä 17 17:47:40 sunnydale systemd[1]: Starting Network Manager Script Dispatcher Service...
kesä 17 17:47:40 sunnydale dbus-daemon[396]: dbus[396]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
kesä 17 17:47:40 sunnydale dbus[396]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
kesä 17 17:47:40 sunnydale systemd[1]: Started Network Manager Script Dispatcher Service.
kesä 17 17:47:49 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) starting connection 'dna internet connection'
kesä 17 17:47:49 sunnydale NetworkManager[387]: <info> (40:98:4E:65:A1:00): device state change: disconnected -> prepare (reason 'none') [30 40 0]
kesä 17 17:47:49 sunnydale NetworkManager[387]: <debug> [1371480469.388835] [nm-manager.c:596] manager_device_state_changed(): stopping connectivity checks
kesä 17 17:47:49 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 1 of 5 (Device Prepare) scheduled...
kesä 17 17:47:49 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 1 of 5 (Device Prepare) started...
kesä 17 17:47:49 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 2 of 5 (Device Configure) scheduled...
kesä 17 17:47:49 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 1 of 5 (Device Prepare) complete.
kesä 17 17:47:49 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 2 of 5 (Device Configure) starting...
kesä 17 17:47:49 sunnydale NetworkManager[387]: <info> (40:98:4E:65:A1:00): device state change: prepare -> config (reason 'none') [40 50 0]
kesä 17 17:47:49 sunnydale NetworkManager[387]: <debug> [1371480469.390823] [nm-manager.c:596] manager_device_state_changed(): stopping connectivity checks
kesä 17 17:47:49 sunnydale NetworkManager[387]: <debug> [1371480469.398034] [nm-device-bt.c:947] act_stage2_config(): (40:98:4E:65:A1:00): requesting connection to the device
kesä 17 17:47:49 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 2 of 5 (Device Configure) complete.
kesä 17 17:47:52 sunnydale NetworkManager[387]: <debug> [1371480472.813677] [nm-device-bt.c:836] bluez_property_changed(): (40:98:4E:65:A1:00): bluez property 'Connected' changed to 'true'
kesä 17 17:47:52 sunnydale NetworkManager[387]: <debug> [1371480472.813775] [nm-device-bt.c:846] bluez_property_changed(): (40:98:4E:65:A1:00): connected to the device
kesä 17 17:47:53 sunnydale NetworkManager[387]: <debug> [1371480473.67585] [nm-device-bt.c:808] bluez_connect_cb(): (40:98:4E:65:A1:00): connect request successful
kesä 17 17:47:53 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00 40:98:4E:65:A1:00/bluetooth) Stage 2 of 5 (Device Configure) successful. Will connect via DUN.
kesä 17 17:47:53 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00/bluetooth) Stage 2 of 5 (Device Configure) waiting for modem to appear.
kesä 17 17:47:53 sunnydale upowerd[518]: (upowerd:518): UPower-Linux-WARNING **: unhandled action 'move' on /sys/devices/pci0000:00/0000:00:13.1/usb4/4-3/4-3:1.0/bluetooth/hci0/hci0:21/rfcomm0
kesä 17 17:47:53 sunnydale kernel: Bluetooth: TIOCGSERIAL is not supported
kesä 17 17:47:54 sunnydale kernel: Bluetooth: TIOCGSERIAL is not supported
kesä 17 17:47:54 sunnydale kernel: Bluetooth: TIOCGSERIAL is not supported
kesä 17 17:47:56 sunnydale ModemManager[390]: <info> Creating modem with plugin 'Nokia' and '1' ports
kesä 17 17:47:56 sunnydale ModemManager[390]: <info> Modem for device at '/sys/devices/pci0000:00/0000:00:13.1/usb4/4-3' successfully created
kesä 17 17:47:56 sunnydale kernel: Bluetooth: TIOCGSERIAL is not supported
kesä 17 17:47:56 sunnydale kernel: Bluetooth: TIOCGSERIAL is not supported
kesä 17 17:47:57 sunnydale ModemManager[390]: <info> Modem: state changed (unknown -> disabled)
kesä 17 17:47:57 sunnydale kernel: Bluetooth: TIOCGSERIAL is not supported
kesä 17 17:47:57 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00/bluetooth) Stage 2 of 5 (Device Configure) modem found.
kesä 17 17:47:57 sunnydale ModemManager[390]: <info> Simple connect started...
kesä 17 17:47:57 sunnydale ModemManager[390]: <info> Simple connect state (3/8): Enable
kesä 17 17:47:57 sunnydale ModemManager[390]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: state changed (disabled -> enabling)
kesä 17 17:47:57 sunnydale NetworkManager[387]: <info> (rfcomm0) modem state changed, 'disabled' --> 'enabling' (reason: user-requested)
kesä 17 17:47:57 sunnydale kernel: Bluetooth: TIOCGSERIAL is not supported
kesä 17 17:47:57 sunnydale ModemManager[390]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: 3GPP Registration state changed (unknown -> registering)
kesä 17 17:47:57 sunnydale ModemManager[390]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: state changed (enabling -> enabled)
kesä 17 17:47:57 sunnydale ModemManager[390]: <info> Simple connect state (4/8): Wait to get fully enabled
kesä 17 17:47:57 sunnydale ModemManager[390]: <info> Simple connect state (5/8): Register
kesä 17 17:47:57 sunnydale ModemManager[390]: <info> Simple connect state (6/8): Bearer
kesä 17 17:47:57 sunnydale NetworkManager[387]: <info> (rfcomm0) modem state changed, 'enabling' --> 'enabled' (reason: user-requested)
kesä 17 17:47:57 sunnydale ModemManager[390]: <info> Simple connect state (7/8): Connect
kesä 17 17:47:57 sunnydale ModemManager[390]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: state changed (enabled -> connecting)
kesä 17 17:47:57 sunnydale NetworkManager[387]: <info> (rfcomm0) modem state changed, 'enabled' --> 'connecting' (reason: user-requested)
kesä 17 17:47:57 sunnydale ModemManager[390]: <warn> Couldn't load Operator Name: 'Unknown error'
kesä 17 17:47:57 sunnydale ModemManager[390]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: 3GPP Registration state changed (registering -> home)
kesä 17 17:47:57 sunnydale ModemManager[390]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: 3GPP location updated (MCC: '0', MNC: '0', Location area code: 'A1', Cell ID: '10C654')
kesä 17 17:47:57 sunnydale ModemManager[390]: <info> Modem /org/freedesktop/ModemManager1/Modem/0: state changed (connecting -> connected)
kesä 17 17:47:57 sunnydale ModemManager[390]: <info> Simple connect state (8/8): All done
kesä 17 17:47:57 sunnydale NetworkManager[387]: <info> (rfcomm0) modem state changed, 'connecting' --> 'connected' (reason: user-requested)
kesä 17 17:47:57 sunnydale NetworkManager[387]: <warn> (rfcomm0): failed to look up interface index
kesä 17 17:47:57 sunnydale NetworkManager[387]: <debug> [1371480477.987235] [nm-device.c:3066] nm_device_activate_schedule_stage3_ip_config_start(): Activation (40:98:4E:65:A1:00) setting firewall zone 'default'
kesä 17 17:47:57 sunnydale NetworkManager[387]: <debug> [1371480477.987260] [nm-firewall-manager.c:107] nm_firewall_manager_add_or_change_zone(): (rfcomm0) firewall zone add/change skipped (not running)
kesä 17 17:47:57 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 3 of 5 (IP Configure Start) scheduled.
kesä 17 17:47:57 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 3 of 5 (IP Configure Start) started...
kesä 17 17:47:57 sunnydale NetworkManager[387]: <info> (40:98:4E:65:A1:00): device state change: config -> ip-config (reason 'none') [50 70 0]
kesä 17 17:47:57 sunnydale NetworkManager[387]: <debug> [1371480477.987628] [nm-manager.c:596] manager_device_state_changed(): stopping connectivity checks
kesä 17 17:47:57 sunnydale NetworkManager[387]: <info> using modem-specified IP timeout: 20 seconds
kesä 17 17:47:57 sunnydale NetworkManager[387]: <info> starting PPP connection
kesä 17 17:47:57 sunnydale NetworkManager[387]: <debug> [1371480477.988323] [nm-ppp-manager.c:1068] nm_ppp_manager_start(): command line: /usr/sbin/pppd nodetach lock nodefaultroute ipv6 , debug rfcomm0 noipdefault noauth usepeerdns lcp-echo-failure 0 lcp-echo-interval 0 ipparam /org/freedesktop/NetworkManager/PPP/0 plugin /usr/lib/pppd/2.4.5/nm-pppd-plugin.so
kesä 17 17:47:58 sunnydale NetworkManager[387]: <info> pppd started with pid 914
kesä 17 17:47:58 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 4 of 5 (IPv6 Configure Timeout) scheduled...
kesä 17 17:47:58 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 3 of 5 (IP Configure Start) complete.
kesä 17 17:47:58 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 4 of 5 (IPv6 Configure Timeout) started...
kesä 17 17:47:58 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 4 of 5 (IPv6 Configure Timeout) complete.
kesä 17 17:47:58 sunnydale pppd[914]: Plugin /usr/lib/pppd/2.4.5/nm-pppd-plugin.so loaded.
kesä 17 17:47:58 sunnydale NetworkManager[387]: Plugin /usr/lib/pppd/2.4.5/nm-pppd-plugin.so loaded.
kesä 17 17:47:58 sunnydale kernel: PPP generic driver version 2.4.2
kesä 17 17:47:58 sunnydale pppd[914]: pppd 2.4.5 started by root, uid 0
kesä 17 17:47:58 sunnydale pppd[914]: using channel 1
kesä 17 17:47:58 sunnydale pppd[914]: Using interface ppp0
kesä 17 17:47:58 sunnydale pppd[914]: Connect: ppp0 <--> /dev/rfcomm0
kesä 17 17:47:58 sunnydale pppd[914]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x2ae21925> <pcomp> <accomp>]
kesä 17 17:47:58 sunnydale NetworkManager[387]: <debug> [1371480478.113258] [nm-netlink-monitor.c:164] link_msg_handler(): netlink link message: iface idx 3 flags 0x1090
kesä 17 17:47:58 sunnydale NetworkManager[387]: using channel 1
kesä 17 17:47:58 sunnydale NetworkManager[387]: Using interface ppp0
kesä 17 17:47:58 sunnydale NetworkManager[387]: Connect: ppp0 <--> /dev/rfcomm0
kesä 17 17:47:58 sunnydale NetworkManager[387]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x2ae21925> <pcomp> <accomp>]
kesä 17 17:47:58 sunnydale systemd-sysctl[922]: Duplicate assignment of kernel/sysrq in file '/usr/lib/sysctl.d/50-default.conf', ignoring.
kesä 17 17:47:58 sunnydale NetworkManager[387]: <debug> [1371480478.116359] [nm-udev-manager.c:568] handle_uevent(): UDEV event: action 'add' subsys 'net' device 'ppp0'
kesä 17 17:47:58 sunnydale NetworkManager[387]: <warn> /sys/devices/virtual/net/ppp0: couldn't determine device driver; ignoring...
kesä 17 17:47:58 sunnydale pppd[914]: rcvd [LCP ConfRej id=0x1 <magic 0x2ae21925> <pcomp> <accomp>]
kesä 17 17:47:58 sunnydale pppd[914]: sent [LCP ConfReq id=0x2 <asyncmap 0x0>]
kesä 17 17:47:58 sunnydale NetworkManager[387]: rcvd [LCP ConfRej id=0x1 <magic 0x2ae21925> <pcomp> <accomp>]
kesä 17 17:47:58 sunnydale NetworkManager[387]: sent [LCP ConfReq id=0x2 <asyncmap 0x0>]
kesä 17 17:47:58 sunnydale pppd[914]: rcvd [LCP ConfAck id=0x2 <asyncmap 0x0>]
kesä 17 17:47:58 sunnydale NetworkManager[387]: rcvd [LCP ConfAck id=0x2 <asyncmap 0x0>]
kesä 17 17:47:58 sunnydale pppd[914]: rcvd [LCP ConfReq id=0x0 <auth pap> <mru 1500> <asyncmap 0xa0000>]
kesä 17 17:47:58 sunnydale pppd[914]: sent [LCP ConfAck id=0x0 <auth pap> <mru 1500> <asyncmap 0xa0000>]
kesä 17 17:47:58 sunnydale NetworkManager[387]: rcvd [LCP ConfReq id=0x0 <auth pap> <mru 1500> <asyncmap 0xa0000>]
kesä 17 17:47:58 sunnydale NetworkManager[387]: sent [LCP ConfAck id=0x0 <auth pap> <mru 1500> <asyncmap 0xa0000>]
kesä 17 17:47:58 sunnydale pppd[914]: sent [PAP AuthReq id=0x1 user="" password=<hidden>]
kesä 17 17:47:58 sunnydale NetworkManager[387]: sent [PAP AuthReq id=0x1 user="" password=<hidden>]
kesä 17 17:48:01 sunnydale pppd[914]: sent [PAP AuthReq id=0x2 user="" password=<hidden>]
kesä 17 17:48:01 sunnydale NetworkManager[387]: sent [PAP AuthReq id=0x2 user="" password=<hidden>]
kesä 17 17:48:01 sunnydale pppd[914]: rcvd [PAP AuthAck id=0x2 ""]
kesä 17 17:48:01 sunnydale pppd[914]: PAP authentication succeeded
kesä 17 17:48:01 sunnydale NetworkManager[387]: rcvd [PAP AuthAck id=0x2 ""]
kesä 17 17:48:01 sunnydale NetworkManager[387]: PAP authentication succeeded
kesä 17 17:48:01 sunnydale kernel: PPP BSD Compression module registered
kesä 17 17:48:01 sunnydale pppd[914]: sent [CCP ConfReq id=0x1 <deflate 15> <deflate(old#) 15> <bsd v1 15>]
kesä 17 17:48:01 sunnydale pppd[914]: sent [IPCP ConfReq id=0x1 <compress VJ 0f 01> <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns2 0.0.0.0>]
kesä 17 17:48:01 sunnydale pppd[914]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:01 sunnydale pppd[914]: rcvd [IPCP ConfReq id=0x0 <addr 10.6.6.6>]
kesä 17 17:48:01 sunnydale pppd[914]: sent [IPCP ConfAck id=0x0 <addr 10.6.6.6>]
kesä 17 17:48:01 sunnydale NetworkManager[387]: sent [CCP ConfReq id=0x1 <deflate 15> <deflate(old#) 15> <bsd v1 15>]
kesä 17 17:48:01 sunnydale NetworkManager[387]: sent [IPCP ConfReq id=0x1 <compress VJ 0f 01> <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns2 0.0.0.0>]
kesä 17 17:48:01 sunnydale NetworkManager[387]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:01 sunnydale NetworkManager[387]: rcvd [IPCP ConfReq id=0x0 <addr 10.6.6.6>]
kesä 17 17:48:01 sunnydale NetworkManager[387]: sent [IPCP ConfAck id=0x0 <addr 10.6.6.6>]
kesä 17 17:48:01 sunnydale kernel: PPP Deflate Compression module registered
kesä 17 17:48:01 sunnydale pppd[914]: rcvd [LCP ProtRej id=0x0 80 fd 01 01 00 0f 1a 04 78 00 18 04 78 00 15 03 2f]
kesä 17 17:48:01 sunnydale pppd[914]: Protocol-Reject for 'Compression Control Protocol' (0x80fd) received
kesä 17 17:48:01 sunnydale NetworkManager[387]: rcvd [LCP ProtRej id=0x0 80 fd 01 01 00 0f 1a 04 78 00 18 04 78 00 15 03 2f]
kesä 17 17:48:01 sunnydale NetworkManager[387]: Protocol-Reject for 'Compression Control Protocol' (0x80fd) received
kesä 17 17:48:01 sunnydale pppd[914]: rcvd [IPV6CP ConfReq id=0x0 <addr fe80::0000:0000:0000:0000>]
kesä 17 17:48:01 sunnydale pppd[914]: sent [IPV6CP ConfNak id=0x0 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:01 sunnydale NetworkManager[387]: rcvd [IPV6CP ConfReq id=0x0 <addr fe80::0000:0000:0000:0000>]
kesä 17 17:48:01 sunnydale NetworkManager[387]: sent [IPV6CP ConfNak id=0x0 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:01 sunnydale pppd[914]: rcvd [IPV6CP ConfReq id=0x1 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:01 sunnydale pppd[914]: sent [IPV6CP ConfAck id=0x1 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:01 sunnydale NetworkManager[387]: rcvd [IPV6CP ConfReq id=0x1 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:01 sunnydale NetworkManager[387]: sent [IPV6CP ConfAck id=0x1 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:01 sunnydale pppd[914]: rcvd [IPV6CP ConfReq id=0x1 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:01 sunnydale pppd[914]: sent [IPV6CP ConfAck id=0x1 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:01 sunnydale NetworkManager[387]: rcvd [IPV6CP ConfReq id=0x1 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:01 sunnydale NetworkManager[387]: sent [IPV6CP ConfAck id=0x1 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:01 sunnydale pppd[914]: rcvd [IPV6CP ConfReq id=0x1 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:01 sunnydale pppd[914]: sent [IPV6CP ConfAck id=0x1 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:01 sunnydale NetworkManager[387]: rcvd [IPV6CP ConfReq id=0x1 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:01 sunnydale NetworkManager[387]: sent [IPV6CP ConfAck id=0x1 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:02 sunnydale pppd[914]: rcvd [IPV6CP ConfReq id=0x1 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:02 sunnydale pppd[914]: sent [IPV6CP ConfAck id=0x1 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:02 sunnydale NetworkManager[387]: rcvd [IPV6CP ConfReq id=0x1 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:02 sunnydale NetworkManager[387]: sent [IPV6CP ConfAck id=0x1 <addr fe80::f042:f734:907e:22b9>]
kesä 17 17:48:03 sunnydale pppd[914]: rcvd [IPCP ConfRej id=0x1 <compress VJ 0f 01>]
kesä 17 17:48:03 sunnydale pppd[914]: sent [IPCP ConfReq id=0x2 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns2 0.0.0.0>]
kesä 17 17:48:03 sunnydale NetworkManager[387]: rcvd [IPCP ConfRej id=0x1 <compress VJ 0f 01>]
kesä 17 17:48:03 sunnydale NetworkManager[387]: sent [IPCP ConfReq id=0x2 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns2 0.0.0.0>]
kesä 17 17:48:03 sunnydale pppd[914]: rcvd [IPCP ConfNak id=0x2 <addr 10.241.96.30> <ms-dns1 62.241.198.245> <ms-dns2 62.241.198.246>]
kesä 17 17:48:03 sunnydale pppd[914]: sent [IPCP ConfReq id=0x3 <addr 10.241.96.30> <ms-dns1 62.241.198.245> <ms-dns2 62.241.198.246>]
kesä 17 17:48:03 sunnydale NetworkManager[387]: rcvd [IPCP ConfNak id=0x2 <addr 10.241.96.30> <ms-dns1 62.241.198.245> <ms-dns2 62.241.198.246>]
kesä 17 17:48:03 sunnydale NetworkManager[387]: sent [IPCP ConfReq id=0x3 <addr 10.241.96.30> <ms-dns1 62.241.198.245> <ms-dns2 62.241.198.246>]
kesä 17 17:48:03 sunnydale pppd[914]: rcvd [IPCP ConfReq id=0x0 <addr 10.6.6.6>]
kesä 17 17:48:03 sunnydale pppd[914]: sent [IPCP ConfAck id=0x0 <addr 10.6.6.6>]
kesä 17 17:48:03 sunnydale NetworkManager[387]: rcvd [IPCP ConfReq id=0x0 <addr 10.6.6.6>]
kesä 17 17:48:03 sunnydale NetworkManager[387]: sent [IPCP ConfAck id=0x0 <addr 10.6.6.6>]
kesä 17 17:48:03 sunnydale pppd[914]: rcvd [IPCP ConfAck id=0x3 <addr 10.241.96.30> <ms-dns1 62.241.198.245> <ms-dns2 62.241.198.246>]
kesä 17 17:48:03 sunnydale pppd[914]: Cannot determine ethernet address for proxy ARP
kesä 17 17:48:03 sunnydale pppd[914]: local IP address 10.241.96.30
kesä 17 17:48:03 sunnydale pppd[914]: remote IP address 10.6.6.6
kesä 17 17:48:03 sunnydale pppd[914]: primary DNS address 62.241.198.245
kesä 17 17:48:03 sunnydale pppd[914]: secondary DNS address 62.241.198.246
kesä 17 17:48:03 sunnydale pppd[914]: Script /etc/ppp/ip-up started (pid 928)
kesä 17 17:48:03 sunnydale NetworkManager[387]: <debug> [1371480483.851617] [nm-netlink-monitor.c:164] link_msg_handler(): netlink link message: iface idx 3 flags 0x110D1
kesä 17 17:48:03 sunnydale NetworkManager[387]: <info> PPP manager(IP Config Get) reply received.
kesä 17 17:48:03 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 5 of 5 (IPv4 Configure Commit) scheduled...
kesä 17 17:48:03 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 5 of 5 (IPv4 Commit) started...
kesä 17 17:48:03 sunnydale NetworkManager[387]: <debug> [1371480483.852986] [nm-system.c:194] sync_addresses(): (ppp0): syncing addresses (family 2)
kesä 17 17:48:03 sunnydale NetworkManager[387]: <debug> [1371480483.853021] [nm-system.c:247] sync_addresses(): (ppp0): removing address '10.241.96.30/32'
kesä 17 17:48:03 sunnydale NetworkManager[387]: rcvd [IPCP ConfAck id=0x3 <addr 10.241.96.30> <ms-dns1 62.241.198.245> <ms-dns2 62.241.198.246>]
kesä 17 17:48:03 sunnydale NetworkManager[387]: Cannot determine ethernet address for proxy ARP
kesä 17 17:48:03 sunnydale NetworkManager[387]: local IP address 10.241.96.30
kesä 17 17:48:03 sunnydale NetworkManager[387]: remote IP address 10.6.6.6
kesä 17 17:48:03 sunnydale NetworkManager[387]: primary DNS address 62.241.198.245
kesä 17 17:48:03 sunnydale NetworkManager[387]: secondary DNS address 62.241.198.246
kesä 17 17:48:03 sunnydale NetworkManager[387]: Script /etc/ppp/ip-up started (pid 928)
kesä 17 17:48:03 sunnydale NetworkManager[387]: <debug> [1371480483.853775] [nm-system.c:280] sync_addresses(): (ppp0): adding address '10.241.96.30/0'
kesä 17 17:48:03 sunnydale pppd[914]: Script /etc/ppp/ip-up finished (pid 928), status = 0x2
kesä 17 17:48:03 sunnydale NetworkManager[387]: Script /etc/ppp/ip-up finished (pid 928), status = 0x2
kesä 17 17:48:04 sunnydale pppd[914]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:04 sunnydale NetworkManager[387]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:04 sunnydale NetworkManager[387]: <debug> [1371480484.855173] [nm-netlink-utils.c:356] dump_route(): route idx 3 family INET (2) addr 10.6.6.6/32
kesä 17 17:48:04 sunnydale NetworkManager[387]: <debug> [1371480484.855250] [nm-netlink-utils.c:356] dump_route(): route idx 3 family INET (2) addr 10.241.96.30/32
kesä 17 17:48:04 sunnydale NetworkManager[387]: <debug> [1371480484.855608] [nm-dns-manager.c:995] nm_dns_manager_begin_updates(): (device_ip4_config_changed): queueing DNS updates (1)
kesä 17 17:48:04 sunnydale NetworkManager[387]: <debug> [1371480484.855649] [nm-dns-manager.c:1013] nm_dns_manager_end_updates(): (nm_dns_manager_end_updates): DNS configuration did not change
kesä 17 17:48:04 sunnydale NetworkManager[387]: <debug> [1371480484.855666] [nm-dns-manager.c:1017] nm_dns_manager_end_updates(): (device_ip4_config_changed): no DNS changes to commit (0)
kesä 17 17:48:04 sunnydale NetworkManager[387]: <info> (40:98:4E:65:A1:00): device state change: ip-config -> secondaries (reason 'none') [70 90 0]
kesä 17 17:48:04 sunnydale NetworkManager[387]: <debug> [1371480484.855795] [nm-manager.c:596] manager_device_state_changed(): stopping connectivity checks
kesä 17 17:48:04 sunnydale NetworkManager[387]: <debug> [1371480484.858147] [nm-device.c:5244] nm_device_queue_state(): (40:98:4E:65:A1:00): queued state change to activated (id 252)
kesä 17 17:48:04 sunnydale NetworkManager[387]: <debug> [1371480484.858200] [nm-device.c:5174] nm_device_state_changed(): (40:98:4E:65:A1:00): device entered SECONDARIES state
kesä 17 17:48:04 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) Stage 5 of 5 (IPv4 Commit) complete.
kesä 17 17:48:04 sunnydale NetworkManager[387]: <debug> [1371480484.870449] [nm-device.c:5202] queued_set_state(): (40:98:4E:65:A1:00): running queued state change to activated (id 252)
kesä 17 17:48:04 sunnydale NetworkManager[387]: <info> (40:98:4E:65:A1:00): device state change: secondaries -> activated (reason 'none') [90 100 0]
kesä 17 17:48:04 sunnydale NetworkManager[387]: <debug> [1371480484.872130] [nm-manager.c:591] manager_device_state_changed(): (40:98:4E:65:A1:00): triggered connectivity check due to state change
kesä 17 17:48:04 sunnydale NetworkManager[387]: <debug> [1371480484.873625] [nm-dns-manager.c:995] nm_dns_manager_begin_updates(): (device_state_changed): queueing DNS updates (1)
kesä 17 17:48:04 sunnydale NetworkManager[387]: <debug> [1371480484.873683] [nm-dns-manager.c:995] nm_dns_manager_begin_updates(): (update_routing_and_dns): queueing DNS updates (2)
kesä 17 17:48:04 sunnydale NetworkManager[387]: <info> Policy set 'dna internet connection' (ppp0) as default for IPv4 routing and DNS.
kesä 17 17:48:04 sunnydale NetworkManager[387]: <debug> [1371480484.874320] [nm-dns-manager.c:1013] nm_dns_manager_end_updates(): (nm_dns_manager_end_updates): DNS configuration changed
kesä 17 17:48:04 sunnydale NetworkManager[387]: <debug> [1371480484.874341] [nm-dns-manager.c:1017] nm_dns_manager_end_updates(): (update_routing_and_dns): no DNS changes to commit (1)
kesä 17 17:48:04 sunnydale NetworkManager[387]: <debug> [1371480484.874368] [nm-dns-manager.c:1013] nm_dns_manager_end_updates(): (nm_dns_manager_end_updates): DNS configuration changed
kesä 17 17:48:04 sunnydale NetworkManager[387]: <debug> [1371480484.874383] [nm-dns-manager.c:1022] nm_dns_manager_end_updates(): (device_state_changed): committing DNS changes (0)
kesä 17 17:48:04 sunnydale NetworkManager[387]: <debug> [1371480484.874399] [nm-dns-manager.c:591] update_dns(): updating resolv.conf
kesä 17 17:48:04 sunnydale NetworkManager[387]: <info> Activation (40:98:4E:65:A1:00) successful, device activated.
kesä 17 17:48:04 sunnydale dbus-daemon[396]: dbus[396]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service'
kesä 17 17:48:04 sunnydale dbus[396]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service'
kesä 17 17:48:04 sunnydale systemd[1]: Starting Network Manager Script Dispatcher Service...
kesä 17 17:48:04 sunnydale dbus-daemon[396]: dbus[396]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
kesä 17 17:48:04 sunnydale dbus[396]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
kesä 17 17:48:04 sunnydale systemd[1]: Started Network Manager Script Dispatcher Service.
kesä 17 17:48:07 sunnydale pppd[914]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:07 sunnydale NetworkManager[387]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:10 sunnydale pppd[914]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:10 sunnydale NetworkManager[387]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:13 sunnydale pppd[914]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:13 sunnydale NetworkManager[387]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:16 sunnydale pppd[914]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:16 sunnydale NetworkManager[387]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:19 sunnydale pppd[914]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:19 sunnydale NetworkManager[387]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:21 sunnydale /etc/gdm/Xsession[622]: (process:953): GLib-CRITICAL **: g_slice_set_config: assertion `sys_page_size == 0' failed
kesä 17 17:48:22 sunnydale pppd[914]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:22 sunnydale NetworkManager[387]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:25 sunnydale /etc/gdm/Xsession[622]: Ikkunointiohjelman varoitus:CurrentTime used to choose focus window; focus window may not be correct.
kesä 17 17:48:25 sunnydale /etc/gdm/Xsession[622]: Ikkunointiohjelman varoitus:Got a request to focus 0x2200006 (jussi@sunn) with a timestamp of 0. This shouldn't happen!
kesä 17 17:48:25 sunnydale /etc/gdm/Xsession[622]: Ikkunointiohjelman varoitus:CurrentTime used to choose focus window; focus window may not be correct.
kesä 17 17:48:25 sunnydale /etc/gdm/Xsession[622]: Ikkunointiohjelman varoitus:Got a request to focus the no_focus_window with a timestamp of 0. This shouldn't happen!
kesä 17 17:48:25 sunnydale pppd[914]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:25 sunnydale NetworkManager[387]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:28 sunnydale pppd[914]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:28 sunnydale NetworkManager[387]: sent [IPV6CP ConfReq id=0x1 <addr fe80::e85e:dbed:209d:cf47>]
kesä 17 17:48:31 sunnydale pppd[914]: IPV6CP: timeout sending Config-Requests
kesä 17 17:48:31 sunnydale NetworkManager[387]: IPV6CP: timeout sending Config-Requests
kesä 17 17:49:41 sunnydale dbus-daemon[396]: dbus[396]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service'
kesä 17 17:49:41 sunnydale dbus[396]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service'
kesä 17 17:49:41 sunnydale systemd[1]: Starting Hostname Service...
kesä 17 17:49:41 sunnydale dbus-daemon[396]: dbus[396]: [system] Successfully activated service 'org.freedesktop.hostname1'
kesä 17 17:49:41 sunnydale dbus[396]: [system] Successfully activated service 'org.freedesktop.hostname1'
kesä 17 17:49:41 sunnydale systemd[1]: Started Hostname Service.
kesä 17 17:49:43 sunnydale /etc/gdm/Xsession[622]: Ikkunointiohjelman varoitus:Log level 8: meta_window_raise: assertion `!window->override_redirect' failed
kesä 17 17:49:44 sunnydale /etc/gdm/Xsession[622]: Ikkunointiohjelman varoitus:Log level 8: meta_window_lower: assertion `!window->override_redirect' failed
And here is log about the updates I made:
[2013-06-17 17:01] [PACMAN] Running 'pacman -Syu'
[2013-06-17 17:01] [PACMAN] synchronizing package lists
[2013-06-17 17:01] [PACMAN] starting full system upgrade
[2013-06-17 17:04] [PACMAN] Running 'pacman -S --asdeps polkit'
[2013-06-17 17:04] [PACMAN] upgraded polkit (0.110-2 -> 0.111-1)
[2013-06-17 17:24] [PACMAN] Running 'pacman -U --asdeps lib32-polkit-0.111-1-x86_64.pkg.tar.xz'
[2013-06-17 17:24] [PACMAN] upgraded lib32-polkit (0.110-2 -> 0.111-1)
[2013-06-17 17:27] [PACMAN] Running 'pacman -S --asdeps libxkbcommon'
[2013-06-17 17:27] [PACMAN] upgraded libxkbcommon (0.3.0-1 -> 0.3.1-1)
[2013-06-17 17:28] [PACMAN] Running 'pacman -U --asdeps lib32-libxkbcommon-0.3.1-1-x86_64.pkg.tar.xz'
[2013-06-17 17:28] [PACMAN] upgraded lib32-libxkbcommon (0.3.0-1 -> 0.3.1-1)
[2013-06-17 17:28] [PACMAN] Running 'pacman -Syu'
[2013-06-17 17:28] [PACMAN] synchronizing package lists
[2013-06-17 17:28] [PACMAN] starting full system upgrade
[2013-06-17 17:33] [PACMAN] removed lib32-dbus-core (1.6.10-1)
[2013-06-17 17:33] [PACMAN] upgraded attr (2.4.46-2 -> 2.4.47-1)
[2013-06-17 17:33] [PACMAN] upgraded acl (2.2.51-3 -> 2.2.52-1)
[2013-06-17 17:33] [PACMAN] upgraded attica (0.4.1-2 -> 0.4.2-1)
[2013-06-17 17:33] [PACMAN] upgraded cups-pk-helper (0.2.4-1 -> 0.2.5-1)
[2013-06-17 17:33] [PACMAN] upgraded dbus (1.6.10-1 -> 1.6.12-1)
[2013-06-17 17:33] [PACMAN] upgraded dosfstools (3.0.17-1 -> 3.0.20-1)
[2013-06-17 17:33] [PACMAN] upgraded gtk-update-icon-cache (2.24.18-1 -> 2.24.19-1)
[2013-06-17 17:33] [PACMAN] upgraded gtk2 (2.24.18-1 -> 2.24.19-1)
[2013-06-17 17:33] [PACMAN] upgraded flashplugin (11.2.202.285-1 -> 11.2.202.291-1)
[2013-06-17 17:33] [PACMAN] upgraded libgdm (3.8.1.1-2 -> 3.8.3-1)
[2013-06-17 17:33] [ALPM] warning: directory permissions differ on /var/log/gdm/
filesystem: 711 package: 1770
[2013-06-17 17:33] [PACMAN] upgraded gdm (3.8.1.1-2 -> 3.8.3-1)
[2013-06-17 17:33] [PACMAN] upgraded geoip-database (20130514-1 -> 20130607-1)
[2013-06-17 17:33] [PACMAN] upgraded git (1.8.3-1 -> 1.8.3.1-1)
[2013-06-17 17:33] [PACMAN] upgraded glib2 (2.36.2-1 -> 2.36.3-2)
[2013-06-17 17:33] [PACMAN] upgraded xkeyboard-config (2.9-1 -> 2.9-2)
[2013-06-17 17:33] [PACMAN] upgraded iso-codes (3.41-1 -> 3.43-1)
[2013-06-17 17:33] [PACMAN] upgraded gnome-desktop (1:3.8.3-1 -> 1:3.8.3-2)
[2013-06-17 17:33] [PACMAN] upgraded gnome-user-docs (3.8.1-1 -> 3.8.2-1)
[2013-06-17 17:33] [PACMAN] upgraded graphite (1:1.2.2-1 -> 1:1.2.3-1)
[2013-06-17 17:33] [PACMAN] upgraded gvfs (1.16.2-2 -> 1.16.3-1)
[2013-06-17 17:33] [PACMAN] upgraded gvfs-afc (1.16.2-2 -> 1.16.3-1)
[2013-06-17 17:33] [PACMAN] upgraded gvfs-goa (1.16.2-2 -> 1.16.3-1)
[2013-06-17 17:33] [ALPM-SCRIPTLET] Users no longer need to be in the 'camera' group to use camera devices
[2013-06-17 17:33] [PACMAN] upgraded libgphoto2 (2.5.1-1 -> 2.5.2-1)
[2013-06-17 17:33] [PACMAN] upgraded gvfs-gphoto2 (1.16.2-2 -> 1.16.3-1)
[2013-06-17 17:33] [PACMAN] upgraded gvfs-mtp (1.16.2-2 -> 1.16.3-1)
[2013-06-17 17:33] [PACMAN] upgraded gvfs-obexftp (1.16.2-2 -> 1.16.3-1)
[2013-06-17 17:33] [PACMAN] upgraded gvfs-smb (1.16.2-2 -> 1.16.3-1)
[2013-06-17 17:33] [PACMAN] upgraded hwids (20130512-1 -> 20130607-1)
[2013-06-17 17:33] [PACMAN] upgraded jre7-openjdk-headless (7.u21_2.3.9-4 -> 7.u40_2.4.0-1)
[2013-06-17 17:33] [PACMAN] upgraded jre7-openjdk (7.u21_2.3.9-4 -> 7.u40_2.4.0-1)
[2013-06-17 17:33] [PACMAN] upgraded jdk7-openjdk (7.u21_2.3.9-4 -> 7.u40_2.4.0-1)
[2013-06-17 17:33] [PACMAN] upgraded json-c (0.10-2 -> 0.11-1)
[2013-06-17 17:33] [PACMAN] upgraded krb5 (1.11.2-4 -> 1.11.3-1)
[2013-06-17 17:33] [PACMAN] upgraded lib32-attr (2.4.46-2 -> 2.4.47-1)
[2013-06-17 17:33] [PACMAN] upgraded lib32-acl (2.2.51-2 -> 2.2.52-1)
[2013-06-17 17:33] [PACMAN] installed lib32-dbus (1.6.12-1)
[2013-06-17 17:33] [PACMAN] upgraded lib32-gtk2 (2.24.18-1 -> 2.24.19-1)
[2013-06-17 17:33] [PACMAN] upgraded lib32-json-c (0.10-2 -> 0.11-1)
[2013-06-17 17:33] [PACMAN] upgraded lib32-krb5 (1.11.2-1 -> 1.11.3-1)
[2013-06-17 17:33] [PACMAN] upgraded libpulse (4.0-1 -> 4.0-2)
[2013-06-17 17:33] [PACMAN] upgraded lib32-libpulse (4.0-1 -> 4.0-2)
[2013-06-17 17:33] [PACMAN] upgraded libxrender (0.9.7-1 -> 0.9.8-1)
[2013-06-17 17:33] [PACMAN] upgraded lib32-libxrender (0.9.7-1 -> 0.9.8-1)
[2013-06-17 17:33] [PACMAN] upgraded libbsd (0.4.2-1 -> 0.5.2-1)
[2013-06-17 17:33] [PACMAN] upgraded libmbim (1.0.0-1 -> 1.2.0-1)
[2013-06-17 17:33] [PACMAN] upgraded libnautilus-extension (3.8.1-1 -> 3.8.2-1)
[2013-06-17 17:33] [PACMAN] upgraded libpipeline (1.2.3-1 -> 1.2.4-1)
[2013-06-17 17:33] [PACMAN] upgraded libquvi-scripts (0.4.14-1 -> 0.4.15-1)
[2013-06-17 17:33] [PACMAN] upgraded libusb-compat (0.1.4-2 -> 0.1.5-1)
[2013-06-17 17:33] [PACMAN] upgraded libxvmc (1.0.7-1 -> 1.0.8-1)
[2013-06-17 17:33] [PACMAN] upgraded link-grammar (4.7.11-1 -> 4.7.12-1)
[2013-06-17 17:33] [PACMAN] upgraded linux-firmware (20130528-1 -> 20130610-1)
[2013-06-17 17:33] [ALPM-SCRIPTLET] >>> Updating module dependencies. Please wait ...
[2013-06-17 17:33] [ALPM-SCRIPTLET] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2013-06-17 17:33] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
[2013-06-17 17:33] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2013-06-17 17:33] [ALPM-SCRIPTLET] ==> Starting build: 3.9.6-1-ARCH
[2013-06-17 17:33] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2013-06-17 17:33] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2013-06-17 17:33] [ALPM-SCRIPTLET] -> Running build hook: [autodetect]
[2013-06-17 17:33] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2013-06-17 17:33] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2013-06-17 17:33] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2013-06-17 17:33] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2013-06-17 17:33] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2013-06-17 17:33] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2013-06-17 17:33] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
[2013-06-17 17:33] [ALPM-SCRIPTLET] ==> Image generation successful
[2013-06-17 17:33] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
[2013-06-17 17:33] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2013-06-17 17:33] [ALPM-SCRIPTLET] ==> Starting build: 3.9.6-1-ARCH
[2013-06-17 17:33] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2013-06-17 17:33] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2013-06-17 17:33] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2013-06-17 17:33] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2013-06-17 17:33] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: bfa
[2013-06-17 17:33] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
[2013-06-17 17:33] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2013-06-17 17:33] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2013-06-17 17:33] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2013-06-17 17:33] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2013-06-17 17:33] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
[2013-06-17 17:33] [ALPM-SCRIPTLET] ==> Image generation successful
[2013-06-17 17:33] [PACMAN] upgraded linux (3.9.5-1 -> 3.9.6-1)
[2013-06-17 17:33] [PACMAN] upgraded linux-headers (3.9.5-1 -> 3.9.6-1)
[2013-06-17 17:33] [PACMAN] upgraded lirc-utils (1:0.9.0-46 -> 1:0.9.0-47)
[2013-06-17 17:33] [PACMAN] upgraded mime-types (8-1 -> 9-1)
[2013-06-17 17:33] [ALPM] warning: extracting /usr/share/applications/nautilus.desktop as /usr/share/applications/nautilus.desktop.pacnew
[2013-06-17 17:33] [ALPM] warning: extracting /usr/share/applications/nautilus-autorun-software.desktop as /usr/share/applications/nautilus-autorun-software.desktop.pacnew
[2013-06-17 17:34] [PACMAN] upgraded nautilus (3.8.1-1 -> 3.8.2-1)
[2013-06-17 17:34] [PACMAN] upgraded p7zip (9.20.1-6 -> 9.20.1-7)
[2013-06-17 17:34] [ALPM] warning: /etc/ppp/ip-down.d/00-dns.sh installed as /etc/ppp/ip-down.d/00-dns.sh.pacnew
[2013-06-17 17:34] [ALPM] warning: /etc/ppp/ip-up.d/00-dns.sh installed as /etc/ppp/ip-up.d/00-dns.sh.pacnew
[2013-06-17 17:34] [PACMAN] upgraded ppp (2.4.5-6 -> 2.4.5-7)
[2013-06-17 17:34] [ALPM-SCRIPTLET] >>> If you have per-user copies of configuration files (such as client.conf,
[2013-06-17 17:34] [ALPM-SCRIPTLET] daemon.conf or default.pa) in ~/.pulse/, make sure you keep them in sync
[2013-06-17 17:34] [ALPM-SCRIPTLET] with changes to the packaged files in /etc/pulse/. Otherwise, PulseAudio
[2013-06-17 17:34] [ALPM-SCRIPTLET] may refuse to start due to configuration errors.
[2013-06-17 17:34] [PACMAN] upgraded pulseaudio (4.0-1 -> 4.0-2)
[2013-06-17 17:34] [PACMAN] upgraded python-dbus-common (1.1.1-2 -> 1.2.0-1)
[2013-06-17 17:34] [PACMAN] upgraded python-dbus (1.1.1-2 -> 1.2.0-1)
[2013-06-17 17:34] [PACMAN] upgraded python2-dbus (1.1.1-2 -> 1.2.0-1)
[2013-06-17 17:34] [PACMAN] upgraded sdparm (1.07-1 -> 1.08-1)
[2013-06-17 17:34] [PACMAN] upgraded sg3_utils (1.35-1 -> 1.36-1)
[2013-06-17 17:34] [PACMAN] upgraded shared-desktop-ontologies (0.10.0-1 -> 0.11.0-1)
[2013-06-17 17:34] [PACMAN] upgraded subversion (1.7.9-6 -> 1.7.10-1)
[2013-06-17 17:34] [PACMAN] upgraded sudo (1.8.6.p8-2 -> 1.8.7-1)
[2013-06-17 17:34] [PACMAN] upgraded syslog-ng (3.4.1-3 -> 3.4.2-1)
[2013-06-17 17:34] [PACMAN] upgraded usbutils (006-1 -> 007-1)
[2013-06-17 17:34] [PACMAN] upgraded webkitgtk (2.0.2-3 -> 2.0.3-1)
[2013-06-17 17:34] [PACMAN] upgraded wine (1.6rc1-1 -> 1.6rc2-1)
I'm marking this thread solved for now. If the problem arises again, I'll reopen it.

After the last Yosemite update on my MacBook pro I turned the FileVault on, now my Mac is freezing all the time and encrypting the drive looks like going to last forever and I am unable to use my MacBook pro what must I do???!!!

after the last Yosemite update on my MacBook pro I turned the FileVault on, now my Mac is freezing all the time and encrypting the drive looks like going to last forever and I am unable to use my MacBook pro what must I do???!!!

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx ' ' 879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 3873345487 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' s/^.+ |\(.+$$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR/d;s/^.+: //p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne 'Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|NVDA$|pagin|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 54 12 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

How can I change the "Ask to join new networks" option using a terminal command?

We are currently switching to a new wireless network throughout our school district and I have pushed commands to connect to the new and remove the old. However, any Macs that have "Ask to join new networks" enabled are jumping over to our unsecure guest network, even if that network has been removed from the list of Preferred Networks. So far the fix has been to remove the guest network from the list of Preferred Networks and then disable Ask to join. The only issue I'm running into now is I have been unable to find a terminal command to change this setting. Once I have the command I can write a script and send that out to all of the Macs.
So is there a way to disable "Ask to join new networks" using command line?

sed -i "" 's/Prompt/DoNothing/' /Library/Preferences/SystemConfiguration/preferences.plist

Error ITMS-9000:"Unable to analyse: page1.xhtml" - Probably caused by Greek characters

I get an "Error ITMS-9000:"Unable to analyse: page1.xhtml" when I try to upload my epub using the itunes producer. I know this is caused because the text within page1.xhtml is in Greek but I do not know how to solve it. I already added "<dc:language>el</dc:language>" at the .opf file and also "<META http-equiv="Content-Type" content="text/html" charset="UTF-8">" at head section of "page1.xhtml" but it still does not work. Any ideas anyone?

Well I found myself the reason of the error and corrected. The reason of this error message was the way the .xhtml file was saved. Ie the file, for some curious reason was saved as UTF-16 instead of UTF-8. To see your encoding open the file that has the problem with chrome browser and go to "tools" and then "encoding". If you see that the encoding is not UTF-8 then open your file with "notepad" and then go to "save as" and then save it as text with "UTF-8" encoding. This solved my problem.

How to adjust the image captured when using Shift Ctrl Command 4 shortcut

After installing Mavericks on my macbook pro I now have issues when I use shift ctrl command 4. When pasting the image into an email it is very large and I am unable to edit it. It used to copy in much smaller.

Open Preview Application.
Select you image.
Click on Tools and select Adjust Size:
Enter the desired parameters:
Ciao.

Unable to use backspace key in SQL Developer

hi
I am unable to use backspace or arrow keys in SQL worksheet using SQL developer.
Can any one help me out...?
You can also contact me on [email protected]
regards
Ahsan

Hi,
to give a worst case. I downloaded actual releases for JDeveloper and SQLDeveloper for MacOS and on my Mac this case is totally unsolved. I tried to check he settings within the preferences.xml but no "googled" solution works to get SPACE and BACKSPACE to work.
I will try the older versions.
I previously used my migrated versions from my older Linux system and everything worked fine. Installing the integrated MacOS versions is fine but using the linux way (using the shell command) seems to work. Hope this will help to find the bug within the packages.
Bye,
Holger

Unable to Use Google Maps

I have recently upgraded to Mac OSX 10.8.4 and use the latest Safari browser (v6.0.5) all the time. At some point, since I use iGoogle as my homepage, my maps changed to the Google Maps version now in place. I am unable to use it, as it never changes from its grey, non-visual map mode to anything allowing me to see a distinct map or to find directions; it just doesn't work. Has anyone else had this problem? If so, what did you do to correct the situation?
I have used Google to search for and select maps.google.com, which brings up the identical screen I see when I choose the Maps tab in iGoogle. It does not display any map even after an arbitrary search for a specific address.
Message was edited by: Bronco 01

Try emptying the Safari cache and deleting cookies ...
Press Command + Option + E to empty the cache.
Now open Safari > Preferences > Privacy
Click Details. Remove all Google related items.
Quit and relaunch Safari to test.
If that doesn't help, try here > Google Maps Help

Unable to create/cleanup persistent session data cache

Hi all
After the iPlanet Webserver 4.1 SP12 starts up the following entries appears in the error log file:
[14/Oct/2003:09:24:48] info ( 5999): successful server startup
[14/Oct/2003:09:24:48] info ( 5999): iPlanet-WebServer-Enterprise/4.1SP12 BB1-12/18/2002 14:18
14/Oct/2003:09:24:49] catastrophe ( 5999): Unable to create/cleanup persistent session data cache
What does the last entry mean?
Thanks for any help :-}
Best regards,
Jean-Claude

Check permissions, disk space of following dirs:
server_root/https-instance/ClassCache/
server_root/https-instance/SessionData/
Try to:
Clear Session Data
Delete JSP Class Cache Files
using the Session Data link under Admin Server GUI Java tab
Hope it helps!

Unable to use Server UTIL to browse JMS destinations

Hello All,
I am using the following command to browse the destination in the Application server system,
java com.evermind.server.jms.JMSServerUtils -port 9129 -username oc4jadmin -password welcome1 browse jms/demoTopic
But it gives the following error (I have given the port number as 9129 as my OC4INSTANCE installed for ESB, BPEL has this port),
Oracle Containers for J2EE 10g (10.1.3.3.0) (build "070610.1800.23513"), OC4J JMS 1.1
javax.jms.JMSException: Unable to create a connection to "/0.0.0.0:9,129" as user "oc4jadmin".
at com.evermind.server.jms.JMSUtils.make(JMSUtils.java:1075)
at com.evermind.server.jms.JMSUtils.toJMSException(JMSUtils.java:1155)
at com.evermind.server.jms.EvermindConnection.<init>(EvermindConnection.java:130)
at com.evermind.server.jms.EvermindConnectionFactory.unprivileged_createConnection(EvermindConnectionFactory.java:131)
at com.evermind.server.jms.EvermindConnectionFactory.access$000(EvermindConnectionFactory.java:45)
at com.evermind.server.jms.EvermindConnectionFactory$1.execute(EvermindConnectionFactory.java:114)
at com.evermind.server.jms.RemoteClientProxy.doSecureOp(RemoteClientProxy.java:94)
at com.evermind.server.jms.EvermindConnectionFactory.createConnection(EvermindConnectionFactory.java:111)
at com.evermind.server.jms.EvermindConnectionFactory.createConnection(EvermindConnectionFactory.java:102)
at com.evermind.server.jms.JMSServerUtils.internalScan(JMSServerUtils.java:665)
at com.evermind.server.jms.JMSServerUtils.scan(JMSServerUtils.java:640)
at com.evermind.server.jms.JMSServerUtils.main(JMSServerUtils.java:191)
Caused by: java.lang.NullPointerException
at com.evermind.server.jms.TCPJMSRemoteServer.initializeConnection(TCPJMSRemoteServer.java:152)
at com.evermind.server.jms.TCPJMSRemoteServer.initializeConnection(TCPJMSRemoteServer.java:110)
at com.evermind.server.jms.TCPJMSRemoteServer.<init>(TCPJMSRemoteServer.java:68)
at com.evermind.server.jms.EvermindConnection.<init>(EvermindConnection.java:122)
... 9 more
Please let me know where is the issue ?
I am able to log onto application server using those credentials.
Thanks
Nags.

Hi Gurus,
I am facing similar problem as the first post in this thread.
I have created a file persistent queue called TRAINING_FILEPERSIST_QUEUE, and have inserted a message in it( verified using the JMX browser).
Here is the message it shows
<textmessage>
<header>
<JMSCorrelationID value="" />
<JMSDeliveryMode value="PERSISTENT" />
<JMSDestination value="Queue[TRAINING_FILEPERSIST_QUEUE]" />
<JMSExpiration value="0" />
<JMSMessageID value="ID:Oc4jJMS.Message.personal.6e320096:12287e016b3:-8000.1115" />
<JMSPriority value="4" />
<JMSRedelivered value="false" />
<JMSReplyTo value="null" />
<JMSTimestamp value="1247841141640" />
<JMSType value="" />
</header>
<properties>
<string key="JMSXConsumerTXID" value="" />
<int key="JMSXDeliveryCount" value="1" />
<string key="JMSXProducerTXID" value="" />
<long key="JMSXRcvTimestamp" value="1247844938531" />
<string key="JMSXUserID" value="oc4jadmin" />
<string key="JMS_OC4J_Type" value="textmessage" />
</properties>
<textbody>
<string value="Ponting,m,30
Waugh,m,30
Bradman,m,35
" />
</textbody>
</textmessage>
Now I am using the following command in the developer prompt to browse the queue:
java com.evermind.server.jms.JMSServerUtils -port 12602 -username oc4jadmin -password welcome1 browse TRAINING_FILEPERSIST_QUEUE
but it gives the following error
Oracle Containers for J2EE 10g (10.1.3.1.0) (build "061008.0900.00025"), OC4J J
MS 1.1
javax.jms.JMSException: TRAINING_FILEPERSIST_QUEUE: destination "Connection[Oc4j
JMS.Connection.personal.17685f93:122895c9c84:-8000.1]" is unknown in connection
"{2}".
at com.evermind.server.jms.JMSUtils.make(JMSUtils.java:1072)
at com.evermind.server.jms.JMSUtils.toJMSException(JMSUtils.java:1152)
at com.evermind.server.jms.JMSUtils.toJMSException(JMSUtils.java:1123)
at com.evermind.server.jms.JMSServerUtils.internalScan(JMSServerUtils.ja
va:672)
at com.evermind.server.jms.JMSServerUtils.scan(JMSServerUtils.java:640)
at com.evermind.server.jms.JMSServerUtils.main(JMSServerUtils.java:191)
Any idea what am I doing wrong.

Applications :: Unable To Use Safari / Google Safe Browsing Service Unavailable

Applications :: Unable To Use Safari / Google Safe Browsing Service Unavailable

Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder.
Thanks to leonie for some information contained in this.

I locked myself out of my ipod touch for 60 mins then actually typed the wrong password in again. Now it is telling me to "connect to itunes". I am unsure how to do this. I am unable to use my ipod at all now. Please help.

Hi,
Due to my brother locking me out of my ipod touch I had to wait an hour to log in again. Unfortunately when I did this, I, again put in the wrong password twice more, each time locking me out for a further 60 minutes. On my 3rd attempt to log in the wrong password was entered again. This time though instead of logging me out for another 60mins it now tells me to "connect to itunes" but I have no idea how to do this and I am now unable to use my ipod. Please help.

See Here > http://support.apple.com/kb/HT1212

Re: Unable to use Cleanup XHTML Commands

Similar Messages

Maybe you are looking for