Re: "Unsupported Video Signal" when connected to TV.

i have a toshiba regza, model 42rv530u. i am getting the same unsupported video when i try to play games or some videos. i have made sure my resolution is set with the tv but noticed my video card is not reconnizeing the tv , has it listed as unidentafied monitor. i had down loaded a driver for a older pc to this tv a few yrs back . the pc i'm hook up to now is new. can anyone point me to a down load for this tv .  Thx

I think the problem is the RESOLUTION of the TV when used as a monitor. My first computer connected had the highest resolution of 1280x1024, 60Hz -- but the options I was able to get from the Toshiba TV were different.
Strangely enough, if I connect a normal 2nd monitor, I will get an image on the Toshiba TV and can use it as a computer monitor. But if I disconnect that 2nd monitor it goes back to saying: 'Unsupported video signal.'
I wish there was a way to set the pc/computer resolution for the Toshiba TV through it's menu...
Still can't get it to work by itself. 

Similar Messages

  • No video signal when connecting Blu Ray player

    I have a new blu ray player and HDMI cable. It will play just fine when connected to little cheap TV but my large Toshiba will just show No video signal when I try  to connect it and use it. I have tried everything, read the whole manual, searched online help, called the support phone number which just directed me back to the online support. Nothing has helped.
    Also when using my old DVD player with the 3 component cables, I never get any color, just black and white picture. 

    The TV likely has a shared video input. You need to tell it in the settings whether you're using a composite or component device. If you have a composite device connected and the TV thinks it's a component device, it'll show up in black and white. What model number is your TV? I'll tell you change the setting once I know what TV you have.
    Also, to what specific port is the new Blu-ray player connected?
    - Peter

  • Do I lose High resolution video signal when I capture through FireWire?

    I have being reading that capturing through Aja Kona video card is an uncompressed video capture. does it mean, I lose some part of my HD resolution video signal when I capture it through fire wire? Could somebody explain me? Thanks.

    No, capturing DV or HDV via firewire is a bit for bit transfer of the original recording ... zero loss.

  • Unsupported Video Signal

    Have a 47TL515 3D tv.  Plugged in a VHS player and it shows the picture fine, but there is an error message on the bottom in a big grey box that reads "Unsupported Video Signal".  How do I get rid of the box?  It won't go away.

    So is this forum to post our issues with new Toshiba products? Do Toshiba support employees even monitor or use this site? Or is it just a place for digruntled users to cry on each others shoulders?
    I may have found a temporary fix to my problem. Was trying to watch another VHS tape with this annoying "Unsupported Video Signal" box on the screen and decided I couldn't take it anymore. I switched the RCA adapter I had plugged into Video 2 with the adapter plugged into Video 1. Switched input so now I was viewing VHS playback on Video 1. Same problem. Big gray Unsupported Video Signal box still there. So I switched them back, so VHS is now plugged into RCA plug adapter in Video 2 slot. All of a sudden the big gray box is gone! And it stayed that way! Was able to enjoy a whole movie without it coming back. And now, a day later, after shutting everything down last night and turning it back on tonight, the big gray box is still missing. Yay!
    Thanks for nothing Toshiba.

  • TS3623 Apple TV works fine if connected directly to Samsung tv, but shows no or incompatible signal when connected through Harman Kardon AVR 1565 av receiver, other signals like dish satellite receiver work fine both ways

    Apple TV (1080p) works fine if connected directly to Samsung tv, but shows no or incompatible signal when connected through Harman Kardon AVR 1565 av receiver, other signals like dish satellite decoder work fine both ways.

    Does it help if you set the output to 720p.

  • Unsupported Video Signal Help

    I'm trying to set up and old Nintendo to my TV. It doesn't have regular AV cable ports, but it has composite cable ports. There is no input as 'AV', but it gas this thing called 'ColorStream HD'. I've tried to set it up through that, but the screen says 'Unsupported Video Signal'. I've tried to set it up with my Wii with the AV cables and it worked, but its like a black and white screen with little to no sound. So the video for the Wii works, but not my NES. Is there something that I'm doing wrong, or is my old console too old to be supported by new TV?

    It won't work. ColorStream HD is expecting a HD signal of at least 480p and you're trying to send an SD signal from a composite output. You will have to try to find some type of adapter instead, perhaps like this:
    http://www.amazon.com/Tmvel-HDMI2RCACVS-Composite-Converter-Blue-Ray/dp/B009A6PJKQ/ref=sr_1_1?ie=UTF...
    Here's a little more info on ColorStream:
    http://www.ehow.com/info_8695466_hdmi-vs-colorstream.html

  • "No Video Signal" when trying to watch with HDMI

    Hi,
    I connect my laptop with HDMI cable to Philips 47 to its HDMI port.
    I get "No Video Signal" message.
    Is there any driver I should download? Or any other solution?

    I forgot to say:
    I have HP Pavilion dv5 Laptop.

  • Ultra 45 w/xvr-300 looses video signal when doing a init 6

    Hello, I have some ultra-45's with the sun xvr-300 video adapter. Loads and boots fine, but after login doing a init 0, the systems looses it's video signal. If I do a boot without seeing the output the system reboots. Also at the login screen, if I try to do a console login, the screen goes away for a few seconds then comes back to the same login screen.
    This all worked on solaris 10 11/06, but having problems with 10 08/07 release.
    any help would be appreciated.
    thx
    G......

    Hello, I have some ultra-45's with the sun xvr-300 video adapter. Loads and boots fine, but after login doing a init 0, the systems looses it's video signal. If I do a boot without seeing the output the system reboots. Also at the login screen, if I try to do a console login, the screen goes away for a few seconds then comes back to the same login screen.
    This all worked on solaris 10 11/06, but having problems with 10 08/07 release.
    any help would be appreciated.
    thx
    G......

  • IPod Classic 160GB - Lost Of Music & Video Files When Connected To iTunes

    I currently have the latest model of the Apple iPod Classic. It's been working great until I decided to connect it to my laptop, to use iTunes. I've done this so many times before without having any problems. Until recently that is.
    My laptop and iTunes are able to read my iPod, but when it shows up on iTunes the music and video section disappears. Only 'Other' and 'Free' shows on the ipod's GB stats, with only 148 GB left to use. Before this happened, I had only 110 GB or so to use, maybe even less, since I had tons of music and video files stored. Also downloaded games, which also disappeared.
    I thought iTunes was the problem, but when I disconnected my iPod, I searched through it manually, and found that all of music, videos, and games are gone, it's like I didn't put anything in it. The only thing that stayed, was the notes, other than that everything vanished. Is there a way to retrieve my old music, video, and game files back? I tried looking into the hidden files of the ipod itself, and went into 'ipod_control' then to music, but every single folder was empty, all 'F' folders.
    I am deeply frustrated about this. I really hope there are solutions out there to help me, without having to re do everything.
    Forgot to add, don't know if this will help but, when I connected the iPod to iTunes, there was a pop up message saying something like 'CheeziPuffs cannot be found or played on your iPod' I have never had this pop up message before when the ipod worked perfectly on iTunes.
    Message was edited by: classic160

    I am having the same problem. Sometimes I get an error code and sometimes I don't. I tried to get apple to do something about it however mine is also out of warranty so no luck. I have read about a lot a people having syncing issues like this with their ipod classic and I am kind of amazed that apple is not willing to fix this issue. If I get it fixed or have any luck with apple I will post here. Good Luck.

  • "Herky-Jerky" video image when connected to "Buddy"

    I have an iBook G4 and just bought a macally icecam. When I am connected to a buddy his image is smooth like a TV but mine is "herky jerky." I tried all I could but can't seem to smooth out the image. I greatly appreciate suggestions.
    Thank you -
    oldjoey and his grandkids.

    Hi
    Have you set the Quicktime streaming setting, goto sys prefs/quicktime/streaming/streaming speed, set to 1.5mbps(dont use automatic)
    In ichats prefs click on video and change bandwidth limit to NONE.
    Restart iChat.
    Tony

  • Weird video corruption when connecting to 27" Display Port Cinema Display

    I'm not sure whether this is a Mountain Lion issue, a hardware issue with the MacBook Pro retina, or a 27" LED cinema display issue (non-Thunderbolt). Last night, when I had brought my MBP-r home from work and connected it to my Cinema Display, the MBP didn't appear to wake up when I hit a key on the external keyboard (Apple's wired keyboard). I opened the lid of the MBP, and I saw this:
    Disconnecting the externa display did not help, nor did putting the MBP to sleep and waking it up again. Eventually, I had to hold the power key down to shut it down. There are no directory or permission errors on the SSD. I'm running Mountain Lion 10.8.3.
    This isn't the first time I've seen this problem, but it's the first time that required a forced restart.

    Thanks for your reply. I will explore your suggestions. I have a MacBook not a MacBook Pro. Does that affect your advice?
    A 2007 MacBook also has mini-dvi so nothing is changed.
    I have asked about the problem at the Apple store with a cinema display specialist.
    Apple stores have "cinema display specialists"?
    They don't know what the problem is and suggest I bring the MacBook in to be checked. They didn't identify any compatibility problem.
    Which is why I question the words "cinema display specialists"!
    We know that the display works fine because we are able to operate it with a MacBook Pro (2011). But any further suggestions welcome.
    Those machines have mini-diplayport (or is it thunderbolt by 2011?  -- doesn't matter).  So no adapters necessary and you know your display works.  But the video out ports are "apples and oranges" here (mini-displayport vs. mini-dvi).  The object your "game" is how to connect (female) mini-dvi to to a (male) mini-displayport display (don't even think about the thunderbolt display).
    I've given you all the ideas I could think of, except when it comes to finding adapters or converters of various "flavors", it's google, google, google.

  • Iphone 4s Loses Signal when Connected to HDMI

    Hello,
    I have an Iphone 4s with the most current software as of today.  When I plug the phone into the AV adapter and then to the HDMI to the TV, I lose cell service, it literally says NO SERVICE in the corner.
    If I unplug the HDMI, it comes back almost instantly.  It is a genuine AV adapter from Apple, I have replaced it as deffective once, and tried it with two different phones.  I have tried the AV cable with and without the power adapter.  If I leave everything plugged in and only unplug the HDMI cord, the service comes back perfectly.
    I have a Samsung HD Plasma TV, it has Anynet, but not sure if that matters at all?  Does anyone else have these problems or thoughts?
    Thank you for your help!
    Robert

    Some more information.  Tried two phones, two AV cords, and two HDMI cables.  I called apple care and they can't figure out what the problem is either... Not sure what to do.  I think my Samsung plasma is sending some sort of signal to the phone which is causing problems.  When I switch to a different source (the blu ray player instaed of the Iphone with AV cord) the signal comes back instantly.  Think maybe I should try the component cable kit instead of the HDMI???
    Any thoughts?    

  • DV Video lost when Connect add-in installed - HELP!

    Hi,
    We have this problem on hosted service Connect installation:
    - video (from a mixer) is going through ADVC110 in DV to PC (Windows 7 64 bit)
    - audio is going in audiocard in PC (because apparently we cannot use the audio in the DV stream???)
    This is working ok
    As soon as we need to use a PowerPoint the Adobe platform asks us to install the "Connect Add-in" or we will not have any audio it states
    Having done this:
    we lose the video from our ADVC 110....and the audio....
    deinstalling the "Connect Add-in" gets us back to the beginning (video ok, audio ok), but then we cannot use a PPT Pod....
    a) why can't we get audio from the DV stream
    b) do we need the add-in
    c) is still a know isssue
    Please help us.
    Tnx
    Martin

    Thanks again. I finally found the answer and it is working in Safari and Chrome
    First I updated Flash Player to the latest version (not sure whether this was required)
    Then I found that even though the add-in was installed that Connect was not using it, as all the browser tabs were still showing, and adjusting sound was crashing the program.
    I deleted the add-in directory from ~/Library/Preferences/Macromedia/Flash Player/www.macromedia.com/bin/connectaddin
    I deleted the add-in directory from ~/Library/Preferences/Macromedia/Flash Player/www.macromedia.com/bin/adobeconnectaddin
    Then I restarted the meeting and created a new Pod and Selected 'Share my Screen'
    This forced the add-in to download and install.
    Adobe Connect now starts from the add-in and not the browser
    Many thanks for your Help Sameer
    Chris

  • Video error when connecting to appletest

    Hi, I have ichat 3.1.8 on both of my computers, my eMac G4 and my iMac intel Core 2 Duo. My eMac has system 10.4.11 and my iMac has 10.4.10.
    Neither of my computers can use iChat appleu3test01 for video because I get an error -8 communication error. I don't know anyone else to check out my video with appleu3test01 is the only one I have tried on iChat. It used to work with system 10.3.9.
    Is this a system error or do I have the wrong iChat software? How can I correct this?
    Thank you,
    Martha

    We would have to know a lot more about you changed on your Mac or the network you are on to say more.
    Essentially there are not any changes in iChat from 10.4.9 to 10.4.11
    8:31 PM Wednesday; December 19, 2007

  • No video signal when turn on hp e9237

    Just turned on computer, fan runs, led light on, no signal on HP2709m moniter. Moniter working. Tried DVI VGA and HDMI connectors, no result. Suggestions?

    At least the monitor is responding. Now, if the monitor is attached to the HD card, you need to remove that card, and attach the monitor cabling to the motherboard. (see photo of choices mentioned above by old_geekster).
    I am a volunteer. I am not an HP employee.
    To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
    The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
    (2) HP DV7t i7 3160QM 2.3Ghz 8GB
    HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
    Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Both Customs use Rosewill Blackhawk case.
    Printer -- HP OfficeJet Pro 8600 Plus

Maybe you are looking for

  • Colorista II showing red render bar in PP CC 2014

    I am working a lot with the plugin Colorista II from Red Giant Software. I am using the latest version of PP CC, Nvidia and the plugin. Graphic card is GTX 970. Everytime I am tweaking with the plugin the render bar turn red. That means no GPU accele

  • Get the date range

    Hi, There is a requirement that we need to get date range.This date range will be arrived at using the function module BKK_GET_PRIOR_WORKDAY. The factory calender id is GB. It should return the date range. Therefore, for weekends the date range will

  • My front camera lend wont open it just stays blurry and one know how to fix this? Restore didnt help tried it already

    front camera wont open it stays blurry its an ipod touch 5g

  • Crucial RAM causes reboot when waking from sleep

    I bought my 2GHz iMac core duo with 1GB RAM already installed and bought another 1GB from Crucial using their "memory advisor tool". Installed the RAM fine and have had ongoing intermittent problems with reboots after waking from sleep - stopped when

  • Testing Performance

    Hi all, I wonder if the performance of a Java-program has a direct relation to the PC you use. When I run the program below (with 30.000 loops) it needs about 60 sec on my PC. I use an old AMD 300 Mhz prozessor with 128 MB Ram. Maybe somebody will wa