Re:update windows 7 Service Pack 1 for x64 based system (KB976932)

Hi, I tried to updte automatically and mannually : windows 7 Service Pack 1 (KB976932) for windows 7 x64 based system. However error 404, happened, no solution suggested I can find online. Could someone can help me?

Hi,
From your error message, error 404 generally means whenever someone asks for a page that’s simply not
available on your site. The reason for this is that there may be a link on your site that was wrong or the page
might have been recently removed from the site. As there is no web page to display, the web server sends a
page that simply says "404 Page not found".
Did you get this error when you download or install process?
Please disable your firewall and antivirus temporarily and then download the package from the following address:
Windows 7 and Windows Server 2008 R2 Service Pack 1 (KB976932)
http://www.microsoft.com/en-us/download/details.aspx?id=5842
Note: make sure choose the proper version (x64) for your system.
After that, run this "Fix it" tool below and install the update again:
Fix the problem with Microsoft Windows Update that is not working
http://support.microsoft.com/mats/windows_update/en-us?entrypoint=lightbox
Karen Hu
TechNet Community Support

Similar Messages

Windows 7 Service Pack 1 for x64-based Systems (KB976932)

After failed attempts to install Windows 7 Service Pack 1, I ran this HotFix
Hotfix for Windows (KB947821)
Installation date: ‎2/‎18/‎2014 1:41 PM
Installation status: Successful
Update type: Important
Fix for KB947821
More information:
http://support.microsoft.com/?kbid=947821
Help and Support:
http://support.microsoft.com
And, now I have multiple copies of Windows 7 Service Pack 1 installed and, the computer wants to continually install another copy upon Shutdown.

Hi,
Are you refering to this KB?
KB947821
Fix Windows Update corruption errors such as 0x80070002 and 0x80070057
Could you please have a share with the error messages that shown after SP1 failed to install?
And, now I have multiple copies of Windows 7 Service Pack 1 installed and, the computer wants to continually install another copy upon Shutdown.
Do you mean the computer wants to continually install another copy every time when shutdown?
Please make sure we have enough space in the system drive(where the system OS installed), perform a cleanup of that drive(ensure we have ), then take a try to boot into
clean boot and install SP1 manually, download fron here:Windows 7 and Windows Server 2008 R2 Service Pack 1 (KB976932)
Best regards
Michael Shao
TechNet Community Support

Not able to install Windows 8.1 Update for x64-based Systems (KB2919355)

My laptop is dell vostro 1014.I have upgraded my laptop to windows 8.1 pro.I am not able to install Windows 8.1 Update for x64-based Systems (KB2919355)I got the following errors from windows event viewer:
Installation Failure: Windows failed to install the following update with error 0x800F0922: Security Update for Internet Explorer 11 for Windows 8.1 for x64-based Systems (KB2964444) without KB2919355.
Installation Failure: Windows failed to install the following update with error 0x800F0922: Windows 8.1 Update for x64-based Systems (KB2919355).
Anyone knows how to fix this error?
If I run the Reset Windows Update Components, I get this:

Hi,
Considering that the security app or third part service may block the installation, please try the clean boot to install this update manually:
How to perform a clean boot
http://support.microsoft.com/kb/929135
If the issue still persists, please upload the cbs.log under
%WinDir%\Logs\CBS\CBS.log into Onedrive or similar network drive and share the link here.
Kate Li
TechNet Community Support

When I update apple driver, a pop-up error message "The folder you specified doesn't contain a compatible driver for your device. If the foldre contains a driver, make sure it is designed to work with Windows for x64-based systems."

When I update apple driver, a pop-up error message "The folder you specified doesn't contain a compatible driver for your device. If the foldre contains a driver, make sure it is designed to work with Windows for x64-based systems."

Hi,
Please also check Event Viewer if it identify this problem.
In addition, also check Device Manager, if similar driver already installed, try to uninstall them and reinstall new driver again for test.
Roger Lu
TechNet Community Support

Can't update windows 7 service pack 1, can I use windows 8 for AirPort Extreme on my laptop?

I need help! I'm trying to set up AE with 3 laptops, a desk top, an ipad and two iPhones! Got the software downloaded onto all but one laptop. My laptop won't configure windows 7 service pack 1 so the AE software won't install. I've tried all Microsoft fixes and still nothing. Any ideas? Can I upgrade to windows 8 and proceed or can you tell me how to get this computer to configure properly?!

Hey Me little
You can set it up using the AirPort Utility app for iOS. It has the ability to set up the AirPort Extreme for you.
AirPort Utility
https://itunes.apple.com/us/app/airport-utility/id427276530?mt=8
Thanks for using Apple Support Communities.
Regards,
-Norm G.

Windows 7 Service pack1 forx64 based systems (KB976932) failed. Code80073701

Windows 7 Service pack1 for x64 based systems (KB976932) failed. Error Code 80073701
ok so I have tried to locate similar problems from others but nothing matches. I have tried so many times to resolve the problem without success so please help me.
Barzea

This is known issue and it is described here
http://support.microsoft.com/kb/2700530
HTH
Milos

Service pack 1 for windows vista home premium

Recently my computer had a virus. I had to do a complete system restore. Now that I have done this I am trying to install the service pack 1 for this operating system and I get to the third step and the progress bar hardly moves. I have let it run for
up to 8 hours and no progression. I tried to install the service pack 2 but it says I need 1 first. Need lots of help on this issue please. Windows update not catching that I need this.

Hi,
During the Windows Vista SP1 installation, this issue occurs when a third-party application holds open a file or locks a file that the Service Pack installation program
has to use. For example, a third-party antivirus or antispyware application may cause this problem. If you are running any third-party applications such as Spyblocker, Internet or web accelerators (programs designed to boost the speed of the Internet connection),
security or anti-virus programs (McAfee, Norton, etc.), I recommend temporarily disabling or shutting them down during the troubleshooting process. Please be sure to re-enable them once the process has completed.
I recommend running Reset Windows Update Tool and System Update Readiness Tool. System resources, such as file data, registry data, and even in-memory data, can develop
inconsistencies during the lifetime of the operating system. These inconsistencies can be caused by various hardware failures or software issues. In some cases, these inconsistencies can affect the Windows servicing store, and they can cause software updates
not to work. We can run Reset Windows Update Tool and System Update Readiness Tool to resolve these inconsistencies. When Reset Windows Update Tool and System Update Readiness Tool detects incorrect manifests, files, or registry data, it might replace the
incorrect data with a corrected version. Please follow the steps below.
Step 1: Run Reset Windows Update Tool and System Update Readiness Tool
1. Please download and run Reset Windows Update Tool from the link below:
http://go.microsoft.com/?linkid=9665683
2. Please download and run System Update Readiness Tool from the link below according to the System Type:
System Update Readiness Tool for Windows Vista 32-bit
http://www.microsoft.com/downloads/details.aspx?FamilyID=2889489c-ee87-4607-8aa5-812e8078ab27&DisplayLang=en
System Update Readiness Tool for Windows Vista 64-bit
http://www.microsoft.com/downloads/details.aspx?FamilyID=14f76773-007c-493f-bece-243bc21ac73d&DisplayLang=en
3. Restart the computer and install Windows Vista SP1. Let’s reinstall
SP1 standalone installer in Clean Boot.
For your reference, I have attached these steps as below:
Step 1: Download Windows Vista Service Pack 1 Standalone Installer
====================================================
1. Download Windows Vista SP1 from the link below according to the System Type:
Windows Vista Service Pack 1 for Windows Vista 32-bit (Size: 544.3MB)
http://www.microsoft.com/downloads/details.aspx?FamilyID=f559842a-9c9b-4579-b64a-09146a0ba746&DisplayLang=en
Windows Vista Service Pack 1 for Windows Vista 64-bit (Size: 873.0MB)
http://www.microsoft.com/downloads/details.aspx?FamilyID=86d267bd-dfcd-47cf-aa76-dc0626dcdf10&DisplayLang=en
2. Please save it on the Desktop.
Step 2: Install Windows Vista SP1 in Clean Boot Mode
=========================================
Please disable all startup items and third party services when booting to avoid conflict when installing
Vista SP1.:
1. Click "Start", type: MSCONFIG in the search box and press Enter.
Note: Please click "Continue" if the "User Account Control" window pops up.
2. Click "Services", check the "Hide All Microsoft Services" box and click "Disable All" (if it is not gray).
3. Click "Startup", click "Disable All", click "OK" and restart the computer.
Note: Temporarily disabling the Startup Group only prevents the startup programs from loading at startup. This shouldn't affect the system or other programs. We can manually run these programs later.
4. Please double click the downloaded Windows Vista Service Pack 1 Standalone Installer and follow the instructions to install Windows
Vista SP1.
To restore the computer to use a Normal Startup, repeat step 1 above. Then click "Normal Startup" on the General tab, click "OK", and then restart the computer.
Please take your time with the steps and let me know the results at your earliest convenience. If there are any questions or concerns, please post here for further
research.
Regards,
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Can't install service pack 1 for Windows 7 64bits - ERROR_IO_DEVICE(0x8007045d)

Hello
everyone.
I can
not install
Service Pack
1
for Windows
7 64-bit version
I've tried
the Windows
Update, tried all the solutions in Micrososft help
(installed
Preparation Tool
for
Windows System Update
7
for x64-based Systems, disabled
anti-virus,
rebooted,
tried
again ....)
and nothing.
At
the end always gives
the error:
Unable to
perform the request due
to
an error
of I / O
device -
Details - Error:
ERROR_IO_DEVICE
(0x8007045D).
Can anyone
help me?
Thank you.

Hi,
Try to use Chkdsk tool to check if it could fix this issue:
1.
Type cmd in the Start Search box, right-click cmd.exe in the Programs list, and then click Run as administrator.
If you are prompted for an administrator password or for confirmation, type your password, or click Continue.
2.
At a command prompt, type the following command, and then press ENTER:
Chkdsk /R X:
In this command, X: is a placeholder that represents the drive letter of the volume that you want to check.
3.
Press Y when you are prompted to check the disk the next time that the system restarts.
4.
Close all applications, and then restart.
Meanwhile, please try to download Windows 7 SP1 package and then install it to check if this issue persists.
Windows 7 and Windows Server 2008 R2 Service Pack 1 (KB976932)
Hope it helps.
Alex Zhao
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the th
Thank you very much! It worked.

Services pack 1 for Vista Home premium will not install!

Services pack 1 keeps failing to install on the second stage. I have tried to install it about 8 or 9 times now but still the same. It just completes the first stage then fails.
Please can you advise me what I need to done to get this to install?
Kind regards
Adam Betts

Hi,
During the Windows Vista SP1 installation, this issue occurs when a third-party application holds open a file or locks a file that the Service Pack installation program
has to use. For example, a third-party antivirus or antispyware application may cause this problem. If you are running any third-party applications such as Spyblocker, Internet or web accelerators (programs designed to boost the speed of the Internet connection),
security or anti-virus programs (McAfee, Norton, etc.), I recommend temporarily disabling or shutting them down during the troubleshooting process. Please be sure to re-enable them once the process has completed.
I recommend running Reset Windows Update Tool and System Update Readiness Tool. System resources, such as file data, registry data, and even in-memory data, can develop
inconsistencies during the lifetime of the operating system. These inconsistencies can be caused by various hardware failures or software issues. In some cases, these inconsistencies can affect the Windows servicing store, and they can cause software updates
not to work. We can run Reset Windows Update Tool and System Update Readiness Tool to resolve these inconsistencies. When Reset Windows Update Tool and System Update Readiness Tool detects incorrect manifests, files, or registry data, it might replace the
incorrect data with a corrected version. Please follow the steps below.
Step 1: Run Reset Windows Update Tool and System Update Readiness Tool
1. Please download and run Reset Windows Update Tool from the link below:
http://go.microsoft.com/?linkid=9665683
2. Please download and run System Update Readiness Tool from the link below according to the System Type:
System Update Readiness Tool for Windows Vista 32-bit
http://www.microsoft.com/downloads/details.aspx?FamilyID=2889489c-ee87-4607-8aa5-812e8078ab27&DisplayLang=en
System Update Readiness Tool for Windows Vista 64-bit
http://www.microsoft.com/downloads/details.aspx?FamilyID=14f76773-007c-493f-bece-243bc21ac73d&DisplayLang=en
3. Restart the computer and install Windows Vista SP1. Let’s reinstall
SP1 standalone installer in Clean Boot.
For your reference, I have attached these steps as below:
Step 1: Download Windows Vista Service Pack 1 Standalone Installer
====================================================
1. Download Windows Vista SP1 from the link below according to the System Type:
Windows Vista Service Pack 1 for Windows Vista 32-bit (Size: 544.3MB)
http://www.microsoft.com/downloads/details.aspx?FamilyID=f559842a-9c9b-4579-b64a-09146a0ba746&DisplayLang=en
Windows Vista Service Pack 1 for Windows Vista 64-bit (Size: 873.0MB)
http://www.microsoft.com/downloads/details.aspx?FamilyID=86d267bd-dfcd-47cf-aa76-dc0626dcdf10&DisplayLang=en
2. Please save it on the Desktop.
Step 2: Install Windows Vista SP1 in Clean Boot Mode
=========================================
Please disable all startup items and third party services when booting to avoid conflict when installing
Vista SP1.:
1. Click "Start", type: MSCONFIG in the search box and press Enter.
Note: Please click "Continue" if the "User Account Control" window pops up.
2. Click "Services", check the "Hide All Microsoft Services" box and click "Disable All" (if it is not gray).
3. Click "Startup", click "Disable All", click "OK" and restart the computer.
Note: Temporarily disabling the Startup Group only prevents the startup programs from loading at startup. This shouldn't affect the system or other programs. We can manually run these programs later.
4. Please double click the downloaded Windows Vista Service Pack 1 Standalone Installer and follow the instructions to install Windows
Vista SP1.
To restore the computer to use a Normal Startup, repeat step 1 above. Then click "Normal Startup" on the General tab, click "OK", and then restart the computer.
Please take your time with the steps and let me know the results at your earliest convenience. If there are any questions or concerns, please post here for further
research.
Regards,
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

HP UFT 12.02 not installing on Windows 7 Service Pack 1

HP UFT 12.02 is not installing on Windows 7 Service Pack 1. But the Install Guide says it supports and recommends Windows 7 Service Pack 1 as the Operating System.

Hey Hello Dear,
   Please upgrade UR windows 7 Service pack to Service pack 2.
   from my knowledge for SQL SERVER 2012 it requires Windows 7 service pack.
   And before installing SQL server 2012 Plz activate .NET framework for that,
   Put UR windows 7 Format CD then,
   Run Command prompt as Administrator and paste following cmd in that
DISM.exe /online /enable-feature /featurename:NetFX3 /All /Source:c:\net35 /LimitAccess
it will take 2 min. after that restart your PC and try to install SQL server 2012.
Note: Before installing SQL SERVER again format UR PC/lapy once.
After this if it gives error while installation then plz change ur setup and try again.
This will be helpful.
Best of Luck
Regards,
Sandesh

Problem installing Service pack 1 for Windows Vista 32-bit from windows update

I have been trying to install Service Pack 1 for Windows Vista Home (32 bits) through Windows Update many times. The Update panel shows Windows Vista Service Pack 1 (KB936330) is available. I install the update, which by the way, just takes me few minutes curiouslly. The "update succesfully installed" message with the green circle checked on appears. But then, when I check my computer properties, the Service Pack 1 is not there and Windows Updated keeps showing again and again the update for Windows Vista Service Pack 1 (KB936330) is available and that needs to be installed. I don't know what else to do, can you help me please.

Hi:
Try downloading and installing the standalone SP1 file.
http://www.microsoft.com/en-us/download/details.aspx?id=30
If you get it to install that way, go straight to SP2 with the standalone download.
http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=16468
Paul

Cumulative Security Update for Windows XP Service Pack 2 Warning!

Not sure how many of you guys remember the problems associated with the Windows XP Service Pack 2 when it was first released, but the latest Cumulative Security patch completely disabled my Plextor 708A DVD drive and locked up Windows Explorer.
Here is the problem patch:
o Cumulative Security Update for Internet Explorer for Windows XP Service Pack 2 (KB883939)
It caused my Plextor 708A to give off two blinking Amber lights, which according to Plextor indicates the drive is defective. Plextor actually tells you to get a RMA ticket and to return the drive. Luckily I found it odd that my DVD drive became defective after I installed the latest windows update and tried uninstalling the 'fixes' before going that route. Fortunately, removal of one of the 'fixes' solved my problem.
If you find that your DVD or CD Player no longer works after doing a windows update, then do the following:
o Go to Control Panel
o Select Add Remove Programs
o Scroll to the bottom and select Security Update for Windows XP (KB883939)
o Click 'Remove'
o Restart your computer
I might not have the latest security fix right now, but at least my computer is running.
Stu: Can you report this to MSI and have them get in touch with M$?

i will, if this is a problem affecting a lot of users.
has anyone else experienced this problem?

What do i do about microsoft drm plugin update for windows 7 service pack 1?

what do i do about microsoft DRM plugin update for windows 7 service pack 1? Do I even need it for my computer? It says next to the download button (to the left) that it is out of date.

Hi,
Are you refering to this KB?
KB947821
Fix Windows Update corruption errors such as 0x80070002 and 0x80070057
Could you please have a share with the error messages that shown after SP1 failed to install?
And, now I have multiple copies of Windows 7 Service Pack 1 installed and, the computer wants to continually install another copy upon Shutdown.
Do you mean the computer wants to continually install another copy every time when shutdown?
Please make sure we have enough space in the system drive(where the system OS installed), perform a cleanup of that drive(ensure we have ), then take a try to boot into
clean boot and install SP1 manually, download fron here:Windows 7 and Windows Server 2008 R2 Service Pack 1 (KB976932)
Best regards
Michael Shao
TechNet Community Support

Can't update AIR application on Windows XP service pack 3

We've run into another AIR update issue with our AIR 2.0.4 sidecar product.
Our application uses the standard ApplicationUpdater.checkNow() method to look for and download updates. Just such an update was issued recently, and one of our team members has reported an issue attempting to download the new update on a Windows XP service pack 3 machine.
They are getting an Error 16818.
Thanks for any insight.

Hi,
Error 16818 is "IO error while saving data to disk". Is there any way we could get the installer log from this machine? It might give us additional clues.
Thanks,
Chris

Service Pack 2 for Windows 7

Service Pack 2 for Windows 7 were is it my updates only give me pack 1 . Its say windows is not bringing pack 2 out . I think thats realy nice of them to do this to there customers has pack 1 crashs most of my programs and i have to untick it every update
errr mmm thanks . Think ill get a Apple next . I carnt stand we have the power to do wot we wont just spend your money on us ( Micosoft ) should be Ripsoft :)

Hi ,
As Oberwald said, service packs are not designed to fix damaged Windows installations. Also, Microsoft haven’t released Windows 7 SP2 package yet. When it release, it will upload on Microsoft website. Let’s look forward together.
Regards,
Vincent Wang
TechNet Community Support

Re:update windows 7 Service Pack 1 for x64 based system (KB976932)

Similar Messages

Maybe you are looking for