Re-use of .264 and .ac3 created by compressor or fcp-share

Good Morning from Belgium
Here is my question
How do I reburn a blu-ray without having to reencode in compressor or using "share" in fcp. In other words, how to re-use the .264 and .ac3 files created in a previous burning session ? I have tried Toast 9 but get 2 files (one with audio, one with video) .
Can I safely delete those huge files if it is not possible to use them later with any software ?
Hope you can help
Michel

I can put a movie in Compressor, add the video and audio presets and then select "Create BD/AVCHD Disc" in the Job Action menu but that will only create one disc.
My idea was to save the .264 and .ac3 files so that I could burn another disc at a later date.
I can do this with Toast but there is no way I can use those files in Compressor again (that I know about).
What exactly did you mean by burn it from a disk image?
I can do that in Toast but I don't know how to do it with Compressor.

Similar Messages

  • How do i use my iMac and the macs wired internet connection to share the internet with my iPod and iPhone

    How do i use my iMac and the macs wired internet connection to share the internet with my iPod and iPhone. For 6months I had set up a network that shared the internet through bluetooth to my iPod 5th gen but i messed it up when i tried to add my iPhone 5s and i can't remember how to do it.

    The following has instructions: OS X Mavericks: Share your Internet connection

  • Use navigation model and runtime created pages

    Hi,
    I have my Portal Application created in JDeveloper, with set of base pages. Pages are stored in default-navigation-model, so I could use i18n in navigation rendering. I'd also like to use runtime pages management. When I enter admin panel, I can add new pages, change order of pages created in jdeveloper, or show/hide them. However those changes are not reflected in the portal, navigation always looks the same, still displays pages I've marked as hidden - is navigation cached somewhere?
    If I create new page in admin panel, it isn't displayed in navigation too. However I could click on this page title in admin panel, go to this page and edit its content - of course even then page is not displayed in the meny, none of menu items is marked a highlited.
    What am I doing wrong? I followed Yannick's tutorial http://www.yonaweb.be/webcenter_tutorial/closer_look_at_navigation_model and switched from page hierarchy to navigation model. Maybe this is the reason?

    I got back to your tutorial and haven't found a place where it'd be explained directly. Maybe "between the lines", but as for Webcenter newbie I haven't notice it.
    I switched back to pages hierarchy. I was using navigation model to achieve i18n in navigation, however I also had problems about that, and as you suggested me once in another thread I changed page titles to PortalBundle keys and rendered values from bundles manually.
    Therefore now comes the second question in this area - is it possible to use page hierarchy, runtime crated pages and still localize page titles?
    P.S. As an experienced Liferay Portal developer, I really try to see any benefits of Webcenter in building custom portals area and still I can hardly find any... ;)

  • Using OSX lion and I created an aim account but ichat will not let me login and says my password or username is incorrect!?

    I have created an AIM account on my computer. When I go to sign into Ichat it does not let me sign in. It says my username/password is incorrect. Any help would be appreciated.

    Hi,
    Whenever I have created a Name at AIM then I have received an email to tell me (via the email I listed) that a name has been created.
    Such as this:-
    Thank you. An AOL account as been created using this email address.
    To complete the registration and activate the account, please verify your email address by clicking the link below.
    Yes, I made this request and I want to reserve this email address as part of the AOL account service
    No, I did not make this request and I do not want my email address registered with the AOL account service
    You will not be able to use this AOL account or make changes to the account until the registration is complete.
    Thank you,
    The AOL Team
    (Some lines are links in the original)
    The wording in the above is from an older confirmation email, I have a newer one has slightly different wording.
    That is then followed by a "Thank for Confirming" email.
    An @mac.com Apple ID that is also a valid AIM Screen Name is registered here
    Keep the password to 16 characters or less (it's an AIM  limit despite the prompts on the Site for longer).
    The Apple ID (Using @mac.com) links one email to the @mac.com name.  That email is a must  but must not already be used with  another Apple ID
    7:30 PM      Thursday; August 18, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Grub uses wrong UUID and cannot create config file

    I've tried performing an installation to a USB drive as per the wiki. Everything works up until I try to boot and grub tries to load the wrong UUID for my / filesystem.
    My next step was to chroot back into the USB install and manually change the UUID to the correct one. Odd, as others have pointed out in this thread
    the grub-mkconfig command should detect the correct UUID if run from within arch-chroot.
    Anyway, after changing the UUID in /boot/grub/grub.cfg and trying to regenerate the config file with `grub-mkconfig -o /boot/grub/grub.cfg` I noticed the file had not changed. This is because the command is exiting successfully, but isn't actually writing any file. I deleted the file and tried the command again to be sure. No new file.
    Next I booted into grub, using the config generated with the wrong UUID, and dropped to the shell using `c` -- I was able to load my install just fine using
    set root=(hd0,gpt2)
    linux /vmlinuz-linux root=/dev/sdb3 ro
    initrd /initramfs-linux.img
    boot
    From there I tried removing the bad config file and recreating it using the `grub-mkconfig -o /boot/grub/grub.cfg` command... no dice. Does anyone know what is going on? At the least the command should tell me that it is failing, no?

    Attached is the output of `grub-mkconfig` running from the chroot.
    root@myhost# grub-mkconfig
    Generating grub configuration file ...
    # DO NOT EDIT THIS FILE
    # It is automatically generated by grub-mkconfig using templates
    # from /etc/grub.d and settings from /etc/default/grub
    ### BEGIN /etc/grub.d/00_header ###
    insmod part_gpt
    insmod part_msdos
    if [ -s $prefix/grubenv ]; then
    load_env
    fi
    if [ "${next_entry}" ] ; then
    set default="${next_entry}"
    set next_entry=
    save_env next_entry
    set boot_once=true
    else
    set default="0"
    fi
    if [ x"${feature_menuentry_id}" = xy ]; then
    menuentry_id_option="--id"
    else
    menuentry_id_option=""
    fi
    export menuentry_id_option
    if [ "${prev_saved_entry}" ]; then
    set saved_entry="${prev_saved_entry}"
    save_env saved_entry
    set prev_saved_entry=
    save_env prev_saved_entry
    set boot_once=true
    fi
    function savedefault {
    if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
    fi
    function load_video {
    if [ x$feature_all_video_module = xy ]; then
    insmod all_video
    else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
    fi
    if loadfont unicode ; then
    set gfxmode=auto
    load_video
    insmod gfxterm
    set locale_dir=$prefix/locale
    set lang=en_US
    insmod gettext
    fi
    terminal_input console
    terminal_output gfxterm
    if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=menu
    set timeout=5
    # Fallback normal timeout code in case the timeout_style feature is
    # unavailable.
    else
    set timeout=5
    fi
    ### END /etc/grub.d/00_header ###
    ### BEGIN /etc/grub.d/10_archlinux ###

  • Using mobile hotspur but to create private network not to share 3G connecti

    Hello all
    I just upgraded from the AT&T iPhone 4 to the Verizon iPhone 4. I want to know is there a way I can use the hotspur but not for routing other clients to 3G? I want to get one of those EyeFi SD cards to put
    In my SLR and be able to upload them wirelessly to my iPhone so I don't need a cable. Thank You!!

    That message simply means that you have fixed IP addresses assigned to the nodes instead of DHCP addressses.  You can configure a cluster using either fixed or DHCP IP addresses.  If you use DHCP, the cluster will obtain a DHCP address.
    Since you posted this to the Hyper-V forum, I will assume that you are creating a cluster for Hyper-V.  If so, it is recommended to have more than two networks.  It is recommended to have NICs for host management, cluster shared volumes, live migration,
    and virtual machine access - at a minimum.  And that is if you are not using networked storage, which will require another two networks.  How you provide those can be accomplished in a variety of ways.
    Here is a really useful checklist of things you should review as you are attempting your first deployment (better to get it right from the begining) -
    http://blogs.technet.com/b/askpfeplat/archive/2013/03/10/windows-server-2012-hyper-v-best-practices-in-easy-checklist-form.aspx
    Here is another blog explaining networking within Hyper-V.  It was written for 2008, but the basics remain the same -
    http://blogs.technet.com/b/jhoward/archive/2008/06/16/how-does-basic-networking-work-in-hyper-v.aspx
    Good luck, and have fun!
    .:|:.:|:. tim

  • Workflow process import and compress footage in compressor for FCP

    What is the workflow to import footage from Panasonic H2 camera to compress to Apple Pro Res 422 codec?

    Open Compressor.
    Drag your footage into the dropzone on the upper left.
    Look in the SETTINGS area in the OTHER WORKFLOWS>Advanced Format Conversions>Apple Codecs for the ProRes 422 for Progressive.  Drag that setting onto your clips.
    Press SUBMIT.
    Move the resulting compressed files to where you want them to be on your media drive.  Get rid of the added naming Compressor puts on there (Apple ProRes 422)...then bring into FCP.
    Very simple.

  • Exporting a 4 minute clip using H.264 Quicktime Conversion but it's 2.5Gb?

    I have edited a 4 minute video using source footage at 1440x1080 50i. When I export using Quicktime Conversion and H.264 compressor it's taking forever and is coming out at a whopping 2.5Gb. I am sure I have used H.264 and Quicktime Conversion before and a file of this length and size should be about 15Mb. Also I remember it taking far less time.
    Anyone got any ideas? I am exporting at the same size and using Best Quality.
    Thanks in advance.

    Hi, welcome to FCP forum,
    Bit rate and frame size affect the file size, also best if you export sound as AAC not PCM.
    If you are aiming at creating a movie for the web then yes, the final result should be well under 80MB.
    Reduce frame size (customize it i.e. 480x270 etc.), keep bit rate at around 1,000kbts not 10,000, do some tests with a portion of the original movie (You could try broadband medium in the Use drop down menu). Initially FCP may show that the export is taking a long time (i.e. FCP shows an initial 7% done and seems to remain like that for rather long) but after a little while the operation is usually completed very quickly.
    With regard to what is and isn't allowed on this forum take a look at the [Help & Terms of Use|http://discussions.apple.com/help.jspa] page.
    G.

  • Unable to see the logical path and file created in FILE tcode from AL11 and unable to upload the file to this path from front end

    Hi Experts,
    I have created the logical path and filename in FILE tcode.I am trying to upload the pdf file to application server by using this path.But
    I am getting message like "Unable to open the file".Even I cannot find the this path in AL11 tcode.Kindly anyone advise how to upload pdf file using
    custom path and file created from FILE tcode.
    Thanks & Regards,
    Anusha.

    Hi Anusha,
    Please give as below.
    I forget to say you cannot open the PDF in AL11 and for that you need some configuration, i think it can be done using content server,not sure completely please wait for some more suggestions.
    Regards,
    Pavan

  • Using Adobe Media Encoder to create H.264, MPEG-2, and WMV videos from After Effects - 6/23/14

    Very disappointed with this choice. I will definitely be seeking to uninstall this version and go back a version or two. Two many extra steps to export an mp4 now. And now we also have to wait longer for a mp4 to render and can't take advantage of the machine's hardware? You guys fighting mp4 as a standard, forcing us to an additional product, or what? I'll be sharing my extreme disappoint with this 'upgrade' with the rest of the developers at work and who just had it installed. I'm not seeing this being too popular opn social media either. Seems like you only did what was best for you.Thanks for showing us who's boss.

    Frank VA wrote:
    And now we also have to wait longer for a mp4 to render and can't take advantage of the machine's hardware?
    Not necessarily. You can render an intermediate codec with AE's render queue (thus using all of AE's power to render) and then drop that file into the Adobe Media Encoder.
    This was the workflow I've always used - even when AE could encode with MP4. Why? Well, because AE sucked at MP4 encoding. You couldn't even do multipass endoding with it!
    This is a useful workflow in a few ways:
    1. You have an archive-quality file to come back to in the future.
    2. You can use AE's full power to render.
    3. You can use AME's superior encoding capabilities.
    4. You can tweak your compression settings and try various encoding parameters to improve the quality while decreasing the bitrate of your product WITHOUT having to re-render the AE comp every time you try since you're working off of the intermediate file. I mean, imagine a comp with several 3d layers, depth of field, shadows from multiple lights, and 250,000 particles from Particular. What if you made an MP4 and then the client needed a smaller file size or the MP4 you made was too heavily compressed and you needed higher quality? I don't know about you, but I'd much rather only render that 18-hour monster once.
    This workflow actually saves time for many people.
    And, in any workflow, this produces a better product.
    Again, this is what I did even when AE could encode MP4's.
    Frank VA wrote:
    You guys fighting mp4 as a standard, forcing us to an additional product, or what?
    They aren't fighting MP4 as a standard, in fact, when Adobe folks pop in here and answer questions, that's often their recommendation for delivery codec.
    Frank VA wrote:
    Seems like you only did what was best for you. Thanks for showing us who's boss.
    Listen, I understand your frustration. Knocking out a quick compressed file from AE for client review is handy.
    However, maintaining the h.264 encoding in AE took up development time. There are only so many person-hours per week for the (relatively tiny) AE team to spend on building each version of AE.
    I never liked AE's h.264 encoding - AME has always done a superior job. Since we have AME to do our encoding, I would rather the AE team focus their effort on improving AE as a compositing and motion graphics tool rather than as an encoding tool.
    Again, I get the frustration. I can see where it feels like they are doing what's good for them and not us, but I think, in the long run, this way is better for us. Right now, the majority of the AE team is working on making AE faster to work with and faster to render. The sooner we get a relatively bug-free version of that, the better! (Especially for folks on Mac OSX Yosemite who can't RAM preview smoothly in any version of AE).
    And at least the After Effects team has been very transparent about things - for example, this blog post talks about their reasoning: using Adobe Media Encoder to create H.264, MPEG-2, and WMV videos from After Effects

  • How do I create a DVD from existing M2V and AC3 files?

    I have previously used Compressor 4 to render a M2V file and an AC3 file from which I burned a DVD 'job'.  Now, a week later, I wish to go back and burn another DVD from these files, (without rendering them again).  How do I use these EXISTING files to create another DVD (using Compressor 4)?
    Thanks,
    Geoff

    If you anticipate that you may need multiple disks, the way to do it is to select Hard Drive as your output device/ That makes a disk image, from which you can burn multiple copies.
    WIth the separate files already created, you could bring them into an authoring program like Toast. But if you want to re-use them in Compressor, I think your only option is to multiplex them in something like MPEG STreamclip and bring the new file back into Compressor.
    Probably easier to redo the Compressor job with the original source.
    Russ

  • Using H.264 to export to create mpeg file?

    When I want to burn a FCP project to DVD SP I export it to Compressor and then choose the "DVD Best quality 120 (or 90) minutes" setting.
    But, when I export for the web I use H.264 compression which gives me really good results.
    Is there anyway of creating an MPEG file to be used in DVD SP which uses H.264 compression quality?
    Thanks,,

    Hi,
    a good reading for you, check out the second part of this article (from F paragrapher onwards):
    http://www.apple.com/quicktime/tutorials/h264.html
    G.

  • IPad2 and a new MacBook running Lion, Both Devices use the same Apple ID which is a Hotmail eMail id. Can I create a new iCloud eMail Id and use iCloud eMail and continue to use my Hotmail Id for my Apple Id and use it for iTunes, iCloud

    I have an iPad2 and a new MacBook running Mountain Lion. Both Devices use the same Apple ID which is a Hotmail eMail id. Can I create a new iCloud eMail Id and use iCloud eMail and continue to use my current Hotmail Id for my Apple Id for iTunes, iCloud.
    Note, I will use both Hotmail and iCloud eMail.

    Welcome to the Apple Community.
    In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")

  • How can I create an csv/excel file using pl/sql and then sending that file

    How can I create an csv/excel file using pl/sql and then sending that file to a clients site using pl/sql?
    I know how to create the csv/excel file but I can't figure out how I would get it to the clients site.

    968776 wrote:
    How can I create an csv/excel file using pl/sql and then sending that file to a clients site using pl/sql?
    I know how to create the csv/excel file but I can't figure out how I would get it to the clients site.You are trying to do it at a wrong place..
    Whay do you want database (pl/sql) code to do these things?
    Anyhow, you may be interested in :
    {message:id=9360007}
    {message:id=9984244}

  • Music and Video on Nas in folders but how do i set up itunes on multiple computers to see and use these files and create libraries?

    Music and Video on Nas in folders but how do i set up itunes on multiple computers to see and use these files and create libraries?
    So i have had a itunes set up on my old PC, bought a NAS and copied the folders over to the NAS, i did this incorrectly and so then even when i told the old PC to use that folder it saw all the songs but wasnt able to play the songs as it was looking in the incorrect place.
    So now i want my Mac as well as my PC and others to all use the music, videos etc on the NAS they are in itunes friendly folders (as they were compiled this way by the itunes on the old PC.
    When i tell the mac to use the itunes library.itl file it sees the song list (about 100gb) but cant see any songs, so i have removed this file to another location for now with the hope to set up a new file and then get it to see the songs on the folder from the NAS.
    Can someone tell me how to do this for all the Mac's and PC's on my network as i really want one master library that all use and add too.
    Thanks for your help in advance.

    I have the same question but I am using two pc's

Maybe you are looking for