Re: Using C Builder for BEA WebLogic Enterprise development
I'm doing some WLE work and trying to get it to work with C Builer 4.0. I've tried setting my 'CC' variable to BCC32 and running the buildobjclient utility against a sample. What I get is a compile line with a bunch of compiler options that Borland C doesn't like. If I run the compilation command generated by buildobjclient and exclude the offending compiler options, I get .obj files, but the linker fails with a 'Linker Error: contains invalid OMF record type 0x21' on the WLE Libraries.According to a C Builder site out there, you can run the implib utility (from Borland) against the existing .dll files from WLE and generate new .lib files that'll work with the Borland linker, but I've yet to see the corrolation between the .dll files and the .lib files, though I haven't researched it much.So far, it appears that it should work, but I'll have to learn a lot more about the differences between MSVC and BCC than I care to. By the way... This all started because I have MSVC 5, but WLE 5.1 appears to only work with MSVC 6, but I've yet to see it in any of BEA's documentation.
Similar Messages
-
Clustering support for BEA Weblogic Enterprise for Solaris/SUN HA
Hi,
Does BEA WLE 5.0.1/5.1 support SUN's SunCluster 2.X HA Framework for the Sun
Enterprise set of Hardware?
If not - do you plan to provide support for it in any future releases?
Thanks and regards
Mark O'Brien
Look for WLS 10.3 under Oracle rather than BEA group.
Konstantin -
Trouble defining BAM Enterprise Message Source for BEA WebLogic Server
Hi all,
I've just started to play a little with Oracle BAM Architect.
I've WLS 10.0 and Oracle BAM Architect 10g release 3.
On Oracle BAM Architect I've defined an Enterprise Message Source for BEA WebLogic Server as follows:
Name: ALSBSource
Owner: ...
Type: BEA WebLogic Server
Initial context factory: weblogic.jndi.WLInitialContextFactory
JNDI Service Provider URL: t3://mypc:7001
TopicConnectionFactory name: com.myConnectionFactory
Topic name: com.myBAMTopic
JMS message type: TextMessage
Durable subscriber name: BAMSubscriber
Client ID: BAMSubscriber
Name | Flow name | Type | Max size | Formatting
content | BAM | String | 1024 | (none)
On WLS 10.0 I've defined the required JMS stuff.
On Oracle Design Studio I've defined a plan that includes:
- an Oracle BAM Enterprise Message Receiver from which I've selected the above 'ALSBSource' Enterprise Message Source
- a simple Grid
I've connected the BAM Enterprise Message Receiver to the Grid and clicked on 'Update' button.
When I try to publish a message on 'com.myBAMTopic' I don't see anything on the grid defined in the Oracle Design Studio.
The first question is about the definition of an Enterprise Message Source for BEA WebLogic Server in the Oracle BAM Architect.
I did not change the Oracle BAM Architect classpath or Oracle Design Studio classpath adding the weblogic.jar, because no error has been raised during the configuration of the message source and the plan. Should I update Oracle classpath with the weblogic.jar ?
Did I forget any other step ?
I thank you in advance for any feedback.
Regards
ferpferp - I got this to work with
JNDI Service Provider URL: http://localhost
When I add the port
JNDI Service Provider URL: http://localhost:23891
I cannot get my EMS to start.
Hopefully this should fix your issue.
Sudeep. -
Should we use JDeveloperor VAJ with BEA Weblogic?
I work in an organisation that extensively uses Oracle, and we have brought in an Ecomerce solution that uses EJBs/JSPs on BEA Weblogic with an Oracle back-end.
We have used JDeveloper for stand-alone Java development previously and already have licences for this IDE.
The suppliers of our Ecomerce system use Visual Age of Java. They say that they are not familiar with JDeveloper, though they believe that the integration with weblogic is inferior to that in VAJ. They recommend that we switch from Jdeveloper to VAJ.
Obviously this would be expensive in terms of licensing and learning another IDE. Has anyone used Oracle JDEveloper and weblogic? If so, what is the deployment of EJBs to weblogic like, and is remote debugging available? We are very happy with Jdeveloper for developing stand-alone Java and Oracle Java stored procedures, so if the weblogic integration is at least reasonable we would like to stick with it.Chris,
Unfortunately, you cannot deploy directly using JDeveloper to Weblogic.
The only solution is to develop your EJB's using JDeveloper. Then use the EJB Deployer Tool that comes with Weblogic to generate the stubs and package and deploy the EJB.
Best of luck,
Rich -
XMLSPY Special Edition for BEA WebLogic 8.1 and WLS 8.1 sp2
Hi,
I'm a newbie for WebLogic Server. I started with WLS 8.1 sp2 since I got the book "J2EE Applications and BEA WebLogic Server 2nd Edition" which was written for WLS 8.1.
While XMLSPY Special Edition for BEA WebLogic (version 5.4 something, built in 2003) is indeed packaged with WLS 8.1 sp2 and can be installed, but it'll pop up a window (ALTOVA License Manager) everytime when I try to use it. This window pops up because the license key is not installed during the installation and therefore can't be used unless a valid key is provided.
I wonder whether I really need to get XMLSPY Special Edition for BEA WebLogic 8.1 working in order to use WLS 8.1 just for the purpose of learning. If so, can someone share with me the the key-code for XMLSPY Special Edition for BEA WebLogic 8.1 please?
BTW, I tried to find something useful to this question/problem at ALTOVA website, no luck at all.
Thank you very much.
JFHi Ravi,
Thanks very much for your very helpful reply.
I got into the problem with xmlspy while I was trying to figure out why the WLS admin console missing the left pane/sidebar. There was only one non-expandable dot sign at the lefttop in the admin console. When I right-click on that little dot icon, the pulldown menu shows one option is to use XMLSPY to check (something along that line). Also, I see the XMLSPY button at the left bottom of my W2003 windows (just next to IE button). So, either way when I invoked XMLSPY I would get that pop up window which tells me there choices: type in a key-code, request for a trial key, or buy a license key. But eventually, I figured out the way to fix my problem - installing a newer version of j2sdk code. However, I wasn't sure whether the xmlspy issue would a hidden problem further down the road for me to learn WLS 8.1.
You're absoluately right commenting on the the right version of WLS to use at the beginning of learning WLS.
I have been VMWare Workstation for several months. I've created a CentOS 5.4 VM with WLS 11g installed. I played with with WLS 11g for a while and even followed through an Oracle online tutorial for that version. But I'm just used to learn something with a hard copy of book and I happen to have this old book on WLS 8.1 which seems to be highly rated before. I may continue to go through this book quickly if I can. However, if I experience too many hard problems down the road, I won't waste too much more time on this path. My long term goal is of course to learn more and better about WLS 11g and other Oracle related framework and tools. There is too much to learn. But the good thing is that Oracle provides everything free to learn. Also, I'm very encouraged by the quality of the Oracle tech group where I can turn for very useful help.
Thanks again and best regards,
JF -
Identity Agent for BEA Weblogic 8.1 / Errors
Hi,
We are trying to install the Identity Server agent for BEA Weblogic 8.1 (on Linux).
After filling in the �Startup Script Location� and �Weblogic Server MBeans Directory� values in the �Weblogic Server Information Panel� screen during installation, we receive the following error:
Unable to execute
at com.sun.identity.agents.tools.weblogic70.WebLogic70ConfigValidator.executeCommand(Unknown Source)
at com.sun.identity.agents.tools.weblogic70.WebLogic70ConfigValidator.getWeblogicVersion(Unknown Source)
at com.sun.identity.agents.install.panels.weblogic70.WebLogic70ConfigPanel.save(Unknown Source)
at com.sun.identity.agents.install.panels.weblogic70.WebLogic70ConfigPanel.isDisplayComplete(Unknown Source)
at com.sun.wizards.core.IteratorLayout.next(IteratorLayout.java:733)
at com.sun.wizards.core.WizardTreeManager.nextButtonPressed(WizardTreeManager.java:1198)
at com.sun.wizards.core.WizardTreeManager.dispatchNavigationEvent(WizardTreeManager.java:440)
at com.sun.wizards.core.WizardTreeManager.run(WizardTreeManager.java:402)
at java.lang.Thread.run(Thread.java:536)
We are trying to install it on Weblogic 8.1 � so any idea why the installer attempts operations on Weblogic 7.0?the question is actually simple
but the error message is nausea
please
set JAVA_HOME=<jdk-dir-used-by-weblogic>
set PATH=$JAVA_HOME/bin:$PATH
if your shell is bsh
you need
JAVA_HOME=<jdk-dir-used-by-weblogic>
export JAVA_HOME
PATH=$JAVA_HOME/bin:$PATH
export PATH
the solution is from sun response -
Developing plug-ins for BEA Weblogic Studio
Can anyone provide pointers on documentation on developing plug-ins for BEA Weblogic Studio (e.g like this one https://beajunitplugin.projects.dev2dev.bea.com/ )
Regards,
-Nfilm leaders clips can be downloaded online if you dig around a bit ... Peter Wiggins has a nice Motion Template clock he offers for free (which is a bargain by anyones reckoning)
easy enough to create your own film leader style countdown with a few back to back text generators separated by clock wipe transitions
color bars can already found in your fcp video generators bin
color bars and a film leader style countdown can also be auto generated during output (print to video and edit to tape)
distort faces and license plate like they do on tv? ... ok i give up, what do you mean? if you mean you want to disguise them (Mosaic, Blur etc) then you can have a bash with my Region Blur plugin
Message was edited by: Andy Mees -
I need to download the server runtime for BEA WEBLOGIC server
Hi ^^,
I am trying to create a web project in Eclipse WTP europa. I do not have the bea weblogic server installed on my desktop. My organization has issues running it locally. I need to first create a project and then create a war and then deploy it on server.
I am going through the tutorial at the following website:
http://www.eclipse.org/webtools/community/tutorials/BuildJ2EEWebApp/BuildJ2EEWebApp.html
It says "To do this tutorial you will need a server runtime that is supported by WTP"
Also "During web application development, we will need a server runtime environment to test, debug and run our project".
Hence I need the link where I can download the server runtime for bea weblogic server.
T&R,
PrashantCrossposted over all places:
[http://forums.sun.com/thread.jspa?threadID=5347690]
[http://forums.sun.com/thread.jspa?threadID=5348001]
[http://forums.sun.com/thread.jspa?threadID=5348002]
Don't crosspost. It's very rude. -
AMA Search Rule Files For BEA Weblogic
Hi friends,
I am looking for AMA search rule files for BEA weblogic.I downloaded this from http://www.oracle.com/technology/tech/migration/ama/exchange/download_bea.html.But I am not able to add it to the AMA Tool in Oracle Jdeveloper.I browse for XML file and click on ok,it hangs.
Can somebody tell me,what could be the issue.
Thanks,
Aparna./stopWebLogic.sh[33]: -Xms256m: not found.
this can be produced by something like this:
javaoptions="-Xms256m" // or other option too
$javacmd $javaoptions
Now if javacmd has not been set, then $javacmd will be evaluated to the empty string, and the program to look for is the first part in $javaoptions, -Xms256m in our case. -
How to use Flash Builder for Eclipse Luna ( is it possible??)
How to use Flash Builder for Eclipse Luna ( is it possible??)
Yes. I have Flash Builder 4.6 and 4.7 running in different Eclipse Luna installs.
More details at http://forums.adobe.com/message/4527443
On Mac, I had to have the 32bit version of Luna for 4.6, and the 64bit version of Luna for 4.7 (and I recently started using 4.7 with Eclipse Mars).
For 4.6 you need to first download Eclipse 3.6 and install the Flash Builder 4.6 plugin to that Eclipse install. For 4.7 you need to download Eclipse 3.7 and install the plugin to that Eclipse install. Once it's installed in the 3.x version, you can then copy the fb*.link files from the Eclipse 3.x dropins folders into your Eclipse Luna's dropin folder.
There is an issue where something in Flash Builder 4.7 won't work right when using it as a plugin, not sure but it might be something with building ANEs. -
Identity Server Policy agent for BEA Weblogic Server 8.0
Hi all,
I donot find policy agents for BEA weblogic 8.X.
Is the 6.1SP2 version forward compatible?
ThanksYou didn't specified the OS. Please find the PA support with different platforms & softwares..
http://docs.sun.com/source/816-6884-10/chapter1.html#wp21986 -
Using NISPY DLLs for VxiPlug&Play driver development
Using NISPY DLLs for VxiPlug&Play driver development.
I am developing and testing VXI Plug&Play drivers. I am testing the error conditions and need to verify the drivers do not send SCPI when invalid parameters are sent. I would like to use the NISPY dlls so that I can verify this automatically, without the tester having to monitor NISPY. Is there a way to do this?We are writing IVI drivers now, I wonder how can we get this test utility
(for IVI
driver testing for compliance with the spec) from your place.
chen ning
Easbeacon Test Systems Co.
"Dan Mondrik" wrote in message
news:[email protected]..
> I assume that what you are trying to do is to ensure that no VISA I/O
> calls get made when your driver has an invalid parameter. Using NI
> Spy will show you what calls are made, as you know.
>
> What you might want to do is to configure NI Spy to start up with
> capture enabled and have it log to a file; then you can visually
> inspect the log file later. However, take note that the log file will
> get huge quickly.
>
> Another option might be to manually disconnect the device
(eg, the MXI
> cable)after viOpen; this assumes that you are doing all your invalid
> parameter testing at one point in time but it may not work for all
> buses.
>
> If you are writing an IVI driver, we do have a test utility for IVI
> driver testing for compliance with the spec, and for some other
> structural tests.
>
> Dan Mondrik
> Senior Software Engineer, NI-VISA
> National Instruments -
Books/Documentation for BEA Weblogic 8.1
Hello Everyone,
II am a complete novice to BEA WebLogic and was looking for a good book the bea documentation is too huge. I would be grateful if someone could let me know what would be a good book to learn. I have browsed through amazon reviews and I have two books in mind
WebLogic: The Definitive Guide
Mastering BEA WebLogic Server: Best Practices for Building and Deploying J2EE Applications.
They have bad reviews to but I guess these seemed to be the best in the worst.
Any help and advice is greatly appreciated.
Thank You.the question is actually simple
but the error message is nausea
please
set JAVA_HOME=<jdk-dir-used-by-weblogic>
set PATH=$JAVA_HOME/bin:$PATH
if your shell is bsh
you need
JAVA_HOME=<jdk-dir-used-by-weblogic>
export JAVA_HOME
PATH=$JAVA_HOME/bin:$PATH
export PATH
the solution is from sun response -
Error in shutdown script for bea weblogic
We have this error in the shutdown script of our bea weblogic:
./stopWebLogic.sh[33]: -Xms256m: not found.
using the Oracle OCI database driver
Shutdown initiated
The shutdown sequence has been initiated.the script is as follows:
echo "using the Oracle OCI database driver"
export ORACLE_HOME=/opt/oracle/product/8.1.7
export NLS_LANG=AMERICAN_AMERICA.UTF8
export ORACLE_CLIENT_VERSION=817
export ORACLE_API_VERSION=8
PATH=$PATH:$ORACLE_HOME/bin
SHARED_LIBRARY_PATH=$WEBLOGIC_HOME/lib/hpux11:$WEBLOGIC_HOME/lib/hpux11/oci$ORACLE_CLIENT_VERSION\_$ORACLE_API_VERSION:$ORACLE
_HOME/lib
PATH=$JDK_HOME/bin:$PATH
export PATH
# Set application specific variables
DOMAIN_NAME=eGovStarters
SERVER_NAME=MyServer
WLS_PW=weblogic
# change to domain directory
cd $WEBLOGIC_HOME/config/$DOMAIN_NAME
# Allow other users in group to see created files - i.e. logfiles
umask 027
# Set system classpath initially to contain WebLogic product JARs
CLASSPATH=$WEBLOGIC_HOME:$WEBLOGIC_HOME/lib/weblogic.jar
#!/bin/sh
# Weblogic start script for egovernment
# Based on Colin Brick's initial version
# Modified 02/04/03 - Colin Brick
# - included settings for Oblix from using SSO Assembly Test as example
# Set General environment variables (Should normally not be changed)
#Java settings
JDK_HOME=/opt/bea/jdk131/
export JDK_HOME
JAVACMD=java
JAVA_OPTIONS=""-server -Xms1024m -Xmx1024m -Xmn320m -XX:SurvivorRatio=8 -Xverbosegc:file=/opt/bea/wlserver6.1/config/eGovStart
ers/logs/gc.log -Dweblogic.system.gc.enabled=false ""
export JAVA_OPTIONS
WEBLOGIC_PORT=51080
#Bea settings
BEA_HOME=/opt/bea
export BEA_HOME
WEBLOGIC_HOME=/opt/bea/wlserver6.1
export WEBLOGIC_HOME
BEA_SECURITY_POLICY=/opt/bea/wlserver6.1/lib/weblogic.policy
export BEA_SECURITY_POLICY
#Oracle settings
echo "using the Oracle OCI database driver"
export ORACLE_HOME=/opt/oracle/product/8.1.7
export NLS_LANG=AMERICAN_AMERICA.UTF8
export ORACLE_CLIENT_VERSION=817
export ORACLE_API_VERSION=8
PATH=$PATH:$ORACLE_HOME/bin
SHARED_LIBRARY_PATH=$WEBLOGIC_HOME/lib/hpux11:$WEBLOGIC_HOME/lib/hpux11/oci$ORACLE_CLIENT_VERSION\_$ORACLE_API_VERSION:$ORACLE
_HOME/lib
PATH=$JDK_HOME/bin:$PATH
export PATH
# Set application specific variables
DOMAIN_NAME=eGovStarters
SERVER_NAME=MyServer
WLS_PW=weblogic
# change to domain directory
cd $WEBLOGIC_HOME/config/$DOMAIN_NAME
# Allow other users in group to see created files - i.e. logfiles
umask 027
# Set system classpath initially to contain WebLogic product JARs
CLASSPATH=$WEBLOGIC_HOME:$WEBLOGIC_HOME/lib/weblogic.jar
domain_NAME=eGovStarters
SERVER_NAME=MyServer
WLS_PW=weblogic
# change to domain directory
cd $WEBLOGIC_HOME/config/$DOMAIN_NAME
# Allow other users in group to see created files - i.e. logfiles
umask 027
# Set system classpath initially to contain WebLogic product JARs
CLASSPATH=$WEBLOGIC_HOME:$WEBLOGIC_HOME/lib/weblogic.jar
#Set the shared library path
if [ -n "$SHLIB_PATH" ]; then
SHLIB_PATH=$SHLIB_PATH:$SHARED_LIBRARY_PATH
else
SHLIB_PATH=$SHARED_LIBRARY_PATH
fi
export SHLIB_PATH
# Start weblogic
# change to weblogic home
cd $WEBLOGIC_HOME
PATH=$WL_HOME/bin:$JAVA_HOME/jre/bin:$JAVA_HOME/bin:$PATH
$JAVACMD -classpath $CLASSPATH -Dbea.home=$BEA_HOME -Dweblogic.Domain=$DOMAIN_NAME -Dweblogic.Name=MyServer weblogic.Admin -ur
l t3://localhost:$WEBLOGIC_PORT -username system -password $WLS_PW SHUTDOWNIt has obviously something to do with the line
JAVA_OPTIONS=""-server -Xms1024m -Xmx1024m -Xmn320m -XX:SurvivorRatio=8 -Xverbosegc:file=/opt/bea/wlserver6.1/config/eGovStart
ers/logs/gc.log -Dweblogic.system.gc.enabled=false ""I googled for this Xms1024m, Xmx1024m and it turns out to be for memory management for the java virtual machine.
I don't know why it sais it can't find "-Xms256m" since it's not in the script.
Anyone with some experience in this field who can help me out?./stopWebLogic.sh[33]: -Xms256m: not found.
this can be produced by something like this:
javaoptions="-Xms256m" // or other option too
$javacmd $javaoptions
Now if javacmd has not been set, then $javacmd will be evaluated to the empty string, and the program to look for is the first part in $javaoptions, -Xms256m in our case. -
Exception when using TIBCO EMS for a WebLogic MDB - intermittent issue
We have a weblogic app that uses an MDB to retreive messages from TIB EMS.
There are no exceptions at first - the messages are retreived and everything works well.
But after a few days and then we see the following exception:
####<Apr 13, 2009 2:11:43 PM EDT> <Error> <Kernel> <dhbpmapp2.is.bear.com> <mngENS_dhbpmapp2> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1239646303673> <BEA-000802> <ExecuteRequest failed
java.lang.ClassCastException: com.tibco.tibjms.naming.TibjmsFederatedQueue.
java.lang.ClassCastException: com.tibco.tibjms.naming.TibjmsFederatedQueue
at weblogic.jms.common.CDS.ddLookup(CDS.java:759)
at weblogic.jms.common.CDS.access$400(CDS.java:37)
at weblogic.jms.common.CDS$DDLookupTimerListener.timerExpired(CDS.java:612)
at weblogic.timers.internal.TimerImpl.run(TimerImpl.java:273)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManag erImpl.java:464)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:200)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:172)
We do not know why this comes up after a few days.
Any help in tracking this down will be greatly appreciated.
We are using Weblogic Server 10.0Hi,
This might be happening when the MDB tries to reconnect to the foreign destination.
Have you configured the TIB EMS as Foreign JMS provider in WLS ?
Do you know whether this issue happens only when
1) the MDB gets redeployed ?
2) the server instance that hosts the foreign dest gets bounced?
3) the JMS module that defines the foreign JMS server gets redeployed ?
Anyway, based on a quick search in support cases, looks like this issue has been already fixed.
Please contact the customer support to get the appropriate patch.
Thanks
Kats
Maybe you are looking for
-
10.7.4 AFP bound to 10.6.8 OD for Network home?
I'm running a mostly 10.6.8 server environment and recently tried to bring a 10.7.4 server into the setup. Open Directory is on 10.6.8 server as is the replica. 10.7.4 server binds to OD master just fine. When I try to set the "Make available for hom
-
I have a Canon MX882 printer and more often than note get an error message that says "Printer not Connected." When I check the printer itself, I get confirmation that the access point is connected. I tried reloading the software and that seemed to ha
-
Push mail not working with wifi but with 3g?
Hello, anyone else also noticed that the push mail option is not working properly with wifi but works well with 3g internet connection? don't know why? if someone from Nokia could answer it would be nice. Thanks
-
Exception handling with try/catch in acrobat
Hi I have a problem using a try/catch block in my acrobat document-script. Try to enter the following into the debugger-console: try{nonexistentFunction();}catch(e){console.println('\nacrobat can't catch')} and run it. The output will be: nonexistent
-
Using CloneZilla I backuped up my MacBook Pro Retina with 512GB SSD with latest OS and bootcamp with Windows 7. During the backup I did get some error but it continued and verification at the end succeeded. However, I am still concerned and therefore