Re-using Custom Menus

I had a dvd mastered but needed to go back and re-edit a couple small portions of the movie file. How do I use the new movie file with the menus I spent 3 days building without having to re-build all the menus one at a time (custom music clips, images, movie clips, etc)
Message was edited by: jhickman

When you export (from iMovie) and write over the movie file that was used as the source file for iDVD, iDVD recognizes the change, and prompts you about the change... I've encountered a bug with iDVD where the static images at the chapter markers get messed up, and you have to re-set them, but other than that, I was able to pretty much re-use the other custom menu settings as-is.

Similar Messages

Using Custom Menu

We use custom menus very often where there are no real needs for Business Process Flows.
I have encountered some annoying behaviour when using the custom menu in combination with the Data Manager that launches as soon as you go over it with the mouse.
Once the data manager is launched, and you navigate in your menu (example you go to the next menu, which is no more than the next sheet / or you open and close a webfile from the menu), BPC is initiallizing dimensions and teams, which can take up to a few seconds, not allowing you to perform any action during that time. I have encountered a system freeze as well in case you try to do something while BPC is initializing these objects.
Anyone has already seen this behaviour and found a workaround?
Thx

We use custom menus very often where there are no real needs for Business Process Flows.
I have encountered some annoying behaviour when using the custom menu in combination with the Data Manager that launches as soon as you go over it with the mouse.
Once the data manager is launched, and you navigate in your menu (example you go to the next menu, which is no more than the next sheet / or you open and close a webfile from the menu), BPC is initiallizing dimensions and teams, which can take up to a few seconds, not allowing you to perform any action during that time. I have encountered a system freeze as well in case you try to do something while BPC is initializing these objects.
Anyone has already seen this behaviour and found a workaround?
Thx

Using Same Menus with Revised Source Movie?

My prediction on this question is that the only answer will be: Recreate From Scratch. But just to further my education, here goes...
I have an iDVD project which I've got set up and working nicely from the DVD authoring standpoint. Menus and buttons have been extensively customized and configured, and everything's functioning the way I want. But for some unforeseen image-quality reasons, I had to go back to my Final Cut timeline and change some filter effects on a number of clips. Other than that, the timeline is exactly the same length, and all the Chapter Markers remain in the exact same locations, with the same names, etc.
So I exported a new .mov QuickTime from FinalCut (called "Project_v2.mov" for the sake of this discussion), and meantime did a "Save As" in iDVD (creating a file called "iDVDProject_v2.dvdproj").
The Questions:
1) Is there now any way (either official or sneaky) whereby I can import the new "Project_v2.mov" source movie into this new "iDVDProject_v2.dvdproj" file, and have iDVD do its proprietary encoding -- but still have all my menus link to this new source material (which is frame-for-frame identical to the original source movie in terms of content, just with some different filter settings applied back in FCP)?
2) If (as I fear) I have to start with a whole new project, and re-create all the custom menus and specific button settings, is there any efficient way to copy menu & button configurations from one project to another -- since "Saving as Favorite Theme" doesn't seem to retain a lot of that button & menu customization, though it's possible I'm not using it correctly.
3) Again just for my education, if this were a DVD-SP project -- and the new .mov source movie had been encoded into asset-ready .m2v and .ac3 files using the same names as the originals -- would I be able to simply trick DVD-SP into referencing these new files and linking to their identical Chapter Markers from the already-created menus and buttons?
Brain hurting now. Must go think about calm, blue oceans...
John B.
Toronto

1. Bengt is right. The 'bug' will cause your chapter markers to default to the same chapter; usually the one nearest the change in your movie, but not always. Even though iDVD will recognize that 'assets have changed' and asks if you wish to update, it will only appear to have incorporated the changes, but the chapter markers will not work. There is no 'fix.' You must recreate the project.
2. You can use 'Grab' to take screen shots of your custom menus and settings so you can more easily reproduce them, but you cannot do a custom saving of those to use in another project. Cheer up; it actually doesn't take THAT long since you have already created the project once, and you can refer to your screen shots to be sure you are reproducing it correctly.
3. No experience with DVD-SP, but I am thinking it may be much the same as iDVD as far as doing what you propose.
Good luck with the redo when you are back from the calm blue oceans!
(Hello, Bengt! Been away...doing more family movies and too much time on Facebook!)

How To Use Dynamic Menus To Place Manually Created Jspx Pages On Sub-Level

JHeadstarters,
Back on the JHS trail and could use some help.
I started using dynamic menus (see section 9.2 JHS Dev Guide) to setup a custom menu structure and found it could not be easier however I need to solve 2 issues;
1. How to get more than 2 levels deep on the menus (parent, child, grand-child, etc.)? In the menu structure setup I have created a menu that is 3-levels deep however when it runs you only get 2 levels. Perhaps a template needs to be changed.
2. How can I assign manually created jspx pages to sub-level menus?
Scenerio;
I have JHS generated pages *** AND *** manually created pages. Using dynamic menus to place the JHS genned pages works fine, the problem is how to do it with manually created pages.
Using Dynamic Menu's I created a top-level menu tab named "warp-core", below it on the next level I have two sub-menus, one named "search" and one named "form" for displaying the results of the search and modifying the rows (don't ask me why they are seperate).
The problem is how to assign the manually created jspx pages to those sub-menus? Or am I going abouth this the wrong way? Perhaps I could use JHS to generate seperate search and display pages.
Thanks!
BG...

Bill,
1. Yes, you need to decide yourself how and where you want to render this third level menu. You then create a region file similar to dynamicMenu2Tabs.jspx, just replace the references to level2MenuItems with level3MenuItems. Then create a custom template to call this menu 3 region file.
For example, you could create a bulleted vertical list for level 3 as illustrated in section 9.1.3 of the Developers Guide (that example is with static menu, but you can use similar technique for dynamic menu)
2. Instead of a group name, you can specify a JSF Navigation action in the menu administration application. So, you create a global navigation case to your custom page, and you enter this navigation case id in the menu admin app.
Note that if you want to generate separate search pages, you can do so by setting the advanced search property to "separatePage".
Steven Davelaar,
JHeadstart Team.

Anyone in PAL land create custom menus in CS2 FOR DVDSPro 4 for 16:9?

Anyone in PAL land create custom menus in DVDSPro 4 for 16:9?
I need help with Photoshop into DVDSpro4 concerning quality of logos and graphics and what presets to use in Photoshop CS2
Thanks!
Dual G5 2.5GHz & Dual G4 Mac OS X (10.4.3)

Hi Allister,
Thats what you should be seeing. The pixel count for both 4:3 and 16:9 are the same. It's the pixel aspect ratio which change. Unfortunately Quicktime doesn't have an aspect ratio flag setting. Hence you get your stretched look.
With respect to the DVDSP settings. As far as I am aware Pan / Scan in DVDSP is still faulty. But it was DVDSP 3 when I last checked this. So, letterbox is the choice for you.
Good Luck

How to do - Custom menus translations.

How can we translate custom menus.
I have done Area menus translations using se43 transaction code.
Could you please help me .
Thanks in advance.

I don't know if <b>SE43N</b> can help u.

How to use customer extension table for schedule line for shopping cart ?

Dear Experts,
One of our client wants to have schedule lines in shopping cart item. I am thinking of using customer extension table at item level for shopping cart. Could you please help me on how I should proceed with the appending the structures so that the end user can fill the shopping cart schedule line details?
Which fields should I consider in such cases?
Thanks and regards,
Ranjan

Hi.
I guess you use SRM 7.0. Please go to IMG.
SRM -> SRM Server -> Cross-Application Basic Settings -> Extensions and Field Control (Personalization) -> Create Table Extensions and Supply with Data
Regards,
Masa

Can we use custom RFC in creating models in Visual composer??

Dear Experts,
Can we use custom RFC in creating models in Visual composer??
If yes, kindly provide some documents or links which would guide me how to achieve it.
Warm Regards
Upendra Agrawal

Hi,
Yes,you can do it.
Configure the rfc and use like others Standard BAPI procedure.
[https://www.sdn.sap.com/irj/scn/wiki?path=/display/vc/connectivity]
Regards,
Govindu

Excel data read from users and upload in to Oracle DB using custom webpart

Hi Team,
I need to get the excel date from user using file upload control and read the data from the excel using custom webpart and validate the each rows whether having the values or not and need to upload the data to the oracle database.
Can you please let me know the best approach to read the data from excel using sharepoint custom webpart.
Thanks,
Mylsamy

Hi,
According to your post, my understanding is that you want to read excel data from the uploaded file and insert the data into Oracle Database.
The following way for your reference:
1.Create a Visual Web Part using Visual Studio.
2. Add an asp.net upload control into the .ascx file.
<div>
<asp:FileUpload ID="fileupload" runat="server" />
<asp:Button ID="btnUpload" runat="server" onclick="btnUpload_Click" Text="Upload" />
</div>
3. Add some logic methods into .ascx.cs file.
protected void btnUpload_Click(object sender, EventArgs e)
//read data and insert the data into Oracle database.
4.We can create a web service for adding data to Oracle database, then consume this web service in the visual web part.
More information:
http://msdn.microsoft.com/en-us/library/ff597539(v=office.14).aspx
http://manish4dotnet.blogspot.in/2013/02/upload-ans-read-excel-file-using-c.html
http://msmvps.com/blogs/windsor/archive/2011/11/04/walkthrough-creating-a-custom-asp-net-asmx-web-service-in-sharepoint-2010.aspx
Best Regards
Dennis Guo
TechNet Community Support

How to get data for current week and previous week using customer exit in Bex.

Hi everyone,
I have a scenario in which I need to display data for current week and previous week (based on "sy_datum" the program has to calculate current week and previous week) in Bex using Customer exit. I have created one variable in Bex Query Designer and I have written code for the variable in CMOD. But it is not working fine, (I know that we can do the same by using offset value in Bex). Can some one guide me how to achieve my requirement using customer exit.
Thanks in Advance,
G S Ramanjaneyulu.

Hi krishna,
Thanks for your quick reply, can you have a look at my code,
case i_vnam.
WHEN 'ZPWK_CWK'.
ranges : pre_week for sy-datum.
data : start_date type DATS,
       end_date TYPE dats .
************FM TO GET FIRST DATE OF CURRENT WEEK ************************
CALL FUNCTION 'BWSO_DATE_GET_FIRST_WEEKDAY'
EXPORTING
    DATE_IN = sy-datum
IMPORTING
    DATE_OUT = start_date.   " WEEK FIRST DATE
end_date = START_DATE + 6.   " WEEK LAST DATE
END_DATE   = START_DATE - 1.   " PREVIOUS WEEK END DATE
START_DATE = START_DATE - 7.   " PREVIOUS WEEK START DATE
**********PREVIOUS WEEK DATES IN PRE_WEEK******************
pre_week-SIGN   = 'I'.
pre_week-option = 'BT'.
pre_week-LOW    = START_DATE.
pre_week-HIGH   = END_DATE.
APPEND pre_week.
CLEAR : START_DATE,END_DATE.
endcase.
Regards,
G S Ramanjaneyulu.

REPOST:Timing does not show up when using custom templates

all,
When I create an unstructured template and use it in a report with show timing set to true, the timing does not show up.
any tips

Correcting my previous reply,
Timing will NOT show if you are using custom template.
null

Interactive Report - search does not work when using custom authentication

Apex 3.2.x
I can authenticate fine with my custom authentication and all of my pages work okay except for one page that uses the Interactive Report feature. When I click 'Filter' then enter the column name, operation (contains, =, like, etc.) and the expression, then click the 'Apply' button, the page just re-displays and my filter information is missing?
If I first login to Apex, select and run my application, the Interactive Report features work just fine. What's missing?

More information:
After login into my Apex workspace (development environment), when I display the Interactive Report and click debug I see this debug message:
"using existing session report settings"
When I login using my application's custom authentication and click debug I see this debug message:
"creating session report settings as copy of public saved report"
Based on this, it appears that my session info in not set correctly when using custom authentication... but I'm not sure what needs to be set.
Edited by: user9108091 on Oct 22, 2010 6:44 AM

Populating the Addressee field using Customer Interface program

Hello All,
Can any body tell me how to populate the "Addressee" column in the HZ_Party_Sites table using Customer Interface Program. Which field should be populated in RA_Customers_Interface_All table inorder to populate the "Addressee" field.
Thank you,
Vijay

You can post this thread in this
Customers as well.
Thanks
GM

How can we use Custom MessageBox in SelectionChangedEvent of LongListSelector for Windows Phone 8

Dear Sir/Madam,
How can we use Custom MessageBox in SelectionChangedEvent of LongListSelector for Windows Phone 8.
Actually my problem is that When i am using Custom MessageBox in SelectionChangedEvent of LongListSelector,when i am click Open(Left Button) it's working fine and navigated correctly,But when i am Click the No(Right Button) then it stayed in same page
but all that page is in stuckup i mean that page is not working and not doing any event.
My C#.net Code
private async void userPageLongListSelector_SelectionChanged(object sender, SelectionChangedEventArgs e)
if (e.AddedItems.Count > 0)
if (userPageLongListSelector.SelectedItem == null)
return;
if (dbTenMin == null)
dbTenMin = new Database(ApplicationData.Current.LocalFolder, "tenMInDBSchema.db");
await dbTenMin.OpenAsync();
var res = (sender as LongListSelector).SelectedItem as _10Min._10MinClass.minUserPages;
var resIndex = (sender as LongListSelector).ItemsSource.IndexOf(userPageLongListSelector.SelectedItem);
string selectedPageName = res.userPages.ToString();
string selectedPageDesignUser = res.pageDesignUser.ToString();
int selectedIndex = resIndex;
CustomMessageBox messageBox = new CustomMessageBox()
Caption = "Message...!",
Message = "This form need offline datalist,Please load now.",
LeftButtonContent = "Open",
RightButtonContent = "No"
messageBox.Dismissed += (s1, e1) =>
switch (e1.Result)
case CustomMessageBoxResult.LeftButton:
string uidAndpwd = _10MinClass._10MinStaticClass.csUidAndPwd.ToString();
_10MinClass._10MinStaticClass.csDataListPageDetails = selectedPageDataDetailsForSchema.ToString();
_10MinClass._10MinStaticClass.csAllDataLists = offlineDataBaseDataListNam;
_10MinClass._10MinStaticClass.csNotCreatedSchemaNameOfDBList = notCreatedDataLists;
userPageLongListSelector.SelectedItem = null;
if (dbTenMin != null)
dbTenMin.Dispose();
dbTenMin = null;
NavigationService.Navigate(new Uri("/10MinformDataList.xaml", UriKind.Relative));
else
NavigationService.Navigate(new Uri("/10MinformDataList.xaml", UriKind.Relative));
break;
case CustomMessageBoxResult.RightButton:
break;
case CustomMessageBoxResult.None:
break;
default:
break;
messageBox.Show();
Same custom messagebox code working in Phone_BackKeyPress event i am writing the code in Right Button that e.OriginalSource.ToString(); then it is working fine.
But It is not working in Selection Changed Event in LongListSelector control in Windows Phone 8.
Please help me,as soon as possible.
Thanks & Regards,
SrinivaaS.

What happens if you leave the implementation for LeftButton empty as well , does the page gets stuck in that case also, if you press left button?
i.e.
CustomMessageBox messageBox = new CustomMessageBox()
Caption = "Message...!",
Message = "This form need offline datalist,Please load now.",
LeftButtonContent = "Open",
RightButtonContent = "No"
messageBox.Dismissed += (s1, e1) =>
switch (e1.Result)
case CustomMessageBoxResult.LeftButton:
break;
case CustomMessageBoxResult.RightButton:
break;
case CustomMessageBoxResult.None:
break;
default:
break;
messageBox.Show();
http://developer.nokia.com/community/wiki/Using_Crypto%2B%2B_library_with_Windows_Phone_8

How to create a Language Branch using custom workflow?

Hi,
I’ve a requirement where I need to create a workflow process which will create a Language branch. i.e I wanted to achieve the functionality using custom workflow as given in the docs: https://dev.day.com/docs/en/cq/current/administering/multi_site_manager.html#Managing the Translation of your Language Branches
As per the OOTB functionality,
1. If the target page is not exist in the Language branch, it will copy the reference page to target path.
2. If the target page is already exists, it will not create a copy of the reference.
After the translation, if we make any changes in the reference page and activate the reference, then we have a button called 'Show side by Side' under Translation in the side kick which shows differences between reference page and translated page.
Example:
So, I would like know how we can achieve this in my custom workflow process. In my workflow process, I’m checking whether the page is existed in the target path or not. If not exist, I used page copy.
Eg: Page page = newPage.copy(originalPage,targetPath+"/"+originalPageName,null,true,true );
When I use above api, it just copies the page and it will not maintain any relation with reference page.
Any pointers would be more helpful.
Thanks
Siva

Hi,
I have a similar request to export the texts from one language and after the translation to import them to the new language, did you find any solution? My question is how can I add some steps into my workflow to validate the imported data -and if the user validate the texts then proceed with next step(in my case I import the text from a file and generate a form with values). I read the documentation from Adobe but I didn't find anything related to how we can add a workflow to a dynamically generated from(I don't use the CQ form component).
Can anybody help me with this?
Thx, Lorand

Re-using Custom Menus

Similar Messages

Maybe you are looking for