Re using the skpe dial out

ive been trying to get the dial up phone

Open the InDesign file and select all of the stories in the Assignments Panel. Click the trash icon in the bottom of the panel.
Bob

Similar Messages

  • HT4108 What is required to use the video composite out on the iPhone 4.  Left and right audio works ok

    What is required to use the video composite out on the iPhone 4   The left and right audio works ok

    Please not that the iPhone uses mono channel for internal speakers, the other path that you see is not the speaker per say. It is the phone microphone. Try using headphones, you will hear both channels. If the problem still persists when using headphones, check your sound balancing in the settings. Go to setting-general-accessibility scroll down and check the slide under mono audio. It should be put at the centre for you to hear both channels ON YOUR HEADPHONES

  • Spry Tabbed Panels set to use the Opacity fade out / in

    can the Spry Tabbed Panels be set to use the Opacity fade out / in similar to the Spry Image SlideShow effects?

    First add an ID to the tab as follows or similar
    <h2 id="second">Tab 2</h2>
    Then add a style rule to add a background image as follows or similar
    .TabbedPanelsTab#second {
        background:url(myImage.gif);
    Gramps

  • Can I develop servlets locally using IE6 without dialing out?

    I have Windows 2000, Internet Explorer 6 and JRun 3.1 on my system. I also have a dial-up internet connection.
    My question is, is there a way to use my browser to access local servlet generated web pages on my system without IE requesting to dial out for each request going to the servlet? Is there some kind of setting that allows me to develop on a local system? Would Netscape work differently than IE?
    When I start my servlet from IE6 using http://localhost:8102/..., IE always prompts "The Web page you requested is not available offline. To view this page, click Connect." If I click Stay Offline, I get no output at all. If I click Connect, I get another prompt stating "Select the service you want to connect to and then enter you user name and password." If at this point I click Work Offline, the request is sent to the servlet and the request is processed. The problem with this is this prompting happens for every request going to the servlet. I also have to keep deleting the off-line content files so that the changed forms get displayed, not the forms stored in the cache. I have "Check for newer versions of stored pages" set to "Every visit to the page".
    Is there any way that I can set up development on my system without dialing out for each request?
    Bob

    Yeah, IE is silly. There is no reason for IE to want to dial up if your server is local. You might want to go through IE help or Tools->Internet Options to figure out.
    Netscape (atleast the version I have) will not ask you to "connect".

  • Late 2012 Mac mini i7 to run dual Dell UltraSharp U2412M WITHOUT using the reported HDMI out problem port?

    I've been reading about all the problems new Mac Mini users are having with trying to expand their desktop using the HDMI port.  ie: snowy screens, fuzzy text, blackouts etc etc.  My Mini is due to arrive in a couple days and I have two Dell UltraSharp U2412M LED/ISP monitors waiting for it.  I know one of them will work fine with a cord I already have: miniDisplay to Displayport.  Is there any way to daisy chain them if I run into this HDMI problem the others are having?  THANKS.
    The monitors have:  Displayport, DVI, VGA connections only. 

    Mine shipped Oct 30 and I've had it running since Nov 6th. I took the original 4GB RAM out and replaced it with 16GB RAM. I also put a Mercury Elite 240GB SSD into the top bay using a doubler kit from OWC. I had an issue with the Disk Utility not liking the setup as two seperate drives. I ended up using Internet Recovery Disk Utility and did a Repair Disk on both drives and  Disk Utility merged the drives into a Fusion Drive which was then properly recognized by DU. It all seems to work well, although I would have preferred seperate drives and more partitions, Fusion Drives are only allowed 1 additional partition, go figure. The HDMI has a bit of overscan with my 50" Panasonic Viera but the colors are good and the picture and fonts clear and distinct @ 1080p. I frequently use 720p for larger images so I can sit on the couch 15' away and read the text without binoculars.

  • I'm trying to use the digital in/out on my G5 with LogicPro

    I've been trying to setup my G5 dual 2.0 (10.4.6) and LogicPro 7.2.1 using the digital in and out of the G5, the problem I'm having is that I cannot make the clock source stay as external, it keeps jumping back to internal even-though it is connected properly to my Digidesign 192 interface's lightpipe.
    When I use the Motu 828 it locks to the 192's clock source just fine.
    Is there something I'm missing, or is it just not possible?
    Thanks in advance
    Marcello Azevedo

    Thanks for responding,
    I'm using Protools on a different computer, all I need is to get the internal Digital In/Out of my G5 dual 2.0 to accept an external clock source, the clock source comes from a 192 I/O interface being used on a G5 dual 2.7 with Protools.
    Thanks
    Marcello Azevedo

  • I want to use the speed dial extension when I start firefox. I have the option checked in speed dial settings but firefox does not open to the speed dial. How do I get this to work?

    I want firefox to open up to the speed dial add-on so I can use it as my start page. In the speed dial options I have checked the option to start firefox in the speed dial but when I open firefox it doesn't open the speed dial.

    Sorry, I don't use that add-on, and I don't see a SpeedDial support forum listed on the download page. <br />
    Here is the SpeedDial homepage. <br />
    http://speeddial.uworks.net/
    http://speeddial.uworks.net/manual.html

  • Can I use the camera w/out a phone plan?

    Can I use this device w/out a phone plan

    I ask because for $80 I might just buy one to see what it is like if I can use some features w/out a phone plan.
    I appreciate that there is a simulator but holding one and using the user interface is what I really want to do.

  • Using the internet when out of town

    what is the best way for me to access the internet on my macbook while I am out of town?

    Hi from Canada - though I travel to Ireland and England frequently. [Sorry this has turned out to be so long, but I hope you find it useful]
    Well a few more thoughts for you both:
    Airport Extreme Base Station:
    This is used to create a wireless network - for us, probably at home, by connecting it with an Ethernet cable to the cable router you have installed already. Then the AirPort in your MacBook Pro will connect (wirelessly) to the base station and then on to the internet. It means you can use the internet anywhere at home.
    So you dont need it for travelling! Your MacBook has all it needs to connect to the internet - either with an Ethernet cable (well, I guess you'd have to take one with you - it's a good idea to have one in your laptop case anyway) or wirelessly via AirPort.
    UK Airports - well any airport really
    Usually the system is that you can buy a wifi access card - in Dublin it's €5 for an hour. This is like a scratch card, you scratch to get a username and password. Then you switch on AirPort and select the network in the list that drops down. I guess in Scotland it might be BT.
    I suspect that all providers are created equal - though some may be more equal than others. It's really all to do with how much they charge.
    In a café:
    There are many cafés, hotel reception areas, bars etc that will have wifi (thought they may call it wireless) access. Generally they are one of two types:
    Hotspot - as soon as you start your AirPort and open your browser it will connect to the webpage of the provider where you can use your credit card to buy time. Time will be available by the minute or by the hour or day or something like that.
    Café etc owned - in this case, it will either be free (you ask them for the password to join the network when AirPort asks for it) or they will sell you the password and either have a card with it on or write it down for you.
    Generally, there are no accounts to set up - you just pay your money and surf!
    MacBook battery:
    Just one word of warning about this. AirPort seems to use up battery power very quickly, well relative to other uses of the computer. So it's a good idea to make sure you're fully charged and take along your power adaptor. In the UK it came with a reasonably long flex from the adaptor to a 3-pin plug for the wall socket. That plus the cable from the adaptor to the magsafe plug gives plenty of length to plug into any socket that may be somewhere near - if you don't have that extra length, see if your Applestore has one - or buy a second adaptor when you get to the UK.
    And dont be afraid to plug in to any power socket you find yourself near either at the airport or in a café or hotel. Everyone does it and they're kind of used to it at this stage - the worst that can happen is that they ask you to unplug it!
    I think that answers it all - let me know if you need anything else.
    Have a great trip - it sounds wonderful.
    Andrew

  • Using ATV2/3 with non-HDMI Receiver and theater projector and also need iTunes downloaded movies to work.   I'm thinking to use the Toslink digital out for surround sound and an HDMI to RGB converter for video but not sure the iTunes DRM will prevent?

    I have a theater with a Runco projector but non HDMI. alas, my receiver is non HDMI. Changing electronics and projector is a non-starter.
    I would like to be able to buy HD movies on iTunes and watch them by streaming via Apple TV3. My plan is to capture surround sound from the TosLink digital out, which my preamp/receiver can handle. For the video, I need to convert the HDMI to RGB component to feed my receiver.
    This is where iTunes DRM and HDCP issues might arise. I am under the impression that I need an non-HDMI compliant converter so that ATV3 can even talk to my receiver. It is my understanding that this is possible and takes care of the HDCP issue. But what about the DRM issue? All I want to do is buy and watch HD movies, no bad intentions. I find it incredible that iit might not be possible.
    Anyways, is there a 100% certain approach even if it costs up to $300-400. Again, changing hardware is a non-starter so please avoid the obvious "buy an HDMI amp and projector".
    Thanks

    I have a theater with a Runco projector but non HDMI. alas, my receiver is non HDMI. Changing electronics and projector is a non-starter.
    I would like to be able to buy HD movies on iTunes and watch them by streaming via Apple TV3. My plan is to capture surround sound from the TosLink digital out, which my preamp/receiver can handle. For the video, I need to convert the HDMI to RGB component to feed my receiver.
    This is where iTunes DRM and HDCP issues might arise. I am under the impression that I need an non-HDMI compliant converter so that ATV3 can even talk to my receiver. It is my understanding that this is possible and takes care of the HDCP issue. But what about the DRM issue? All I want to do is buy and watch HD movies, no bad intentions. I find it incredible that iit might not be possible.
    Anyways, is there a 100% certain approach even if it costs up to $300-400. Again, changing hardware is a non-starter so please avoid the obvious "buy an HDMI amp and projector".
    Thanks

  • Recording using the head phone out

    I am sure this question has benn asked before but I couldn't find it on the postings. Is there any way I can record from CD/Tape player using the head phone output? There are no other sources of output. Thanks, Herb Hall

    herbhall274,
    I've connected the headphone jack of a small handheld cassette player to the line-in of a SoundBlaster card (using a male-male stereo cable). Turn up the CD/Tape player volume slowly until you get a good sound level in your recording software that doesn't clip. That will keep your input voltage in a range that is safe for your soundcard (~v). As long as you're talking about a standard CD/Tape unit that runs on batteries or a low voltage DC adapter, or a deck unit with a low voltage headphone jack, it should work.Message Edited by Katman on 02-29-200805:36 PM

  • Can't record sound using the jack in/out on macbook pro 13 os x

    hi
    i bought a new macbook pro 13' intel core i5 4gb with the latest os x version 10.8.2. mainly for sound and video editing
    yesterday i tried to record sound using garage band and through the mini jack port. once i connected an mp3 player to the mini jack port, the sound prefrences window recognized it as headphones and not as input jack as it did on my friend's same mac with leopard os on it.
    it seems like no matter what i try to do (changing instument set up on garage band, restarting the computer with the jack in or out etc...) nothing worked
    i bought this mac just so i wouldn't have to deal with these kind of problems....suppose to be a very user friendly os and hardwear.
    very dissapointing. please if any one has a clue what can be done?

    i'm aware of my other audio interface options, but i would expact this machine to have the basic options every 20 year old pc has, a simple plug and play difault to get audio into my computer. i bought it at b and h in NY and in their specs it says that it's a 'combo kack' - meaning both in and out analog audio ports. after cheaking mac's site it says only headphones.
    also tryied to connect a digidesign mini mbox2, through the usb port, and i had to unplug it, shut down the mbp, restart it again etc.. and it also doesn't always work propely and makes all kinds of digital error sounds.
    although in this case i can't that the mbox is not damaged.
    over all it's very dissapointing. it's my first mac and i figured it would be a much more idiot proof, user freindly work tool.
    if you got any other tips i'd appreciate that
    thanx alot for the focusrite link

  • Can I use the iPhone 5 out of the box as a wifi device?

    Can I buy an Unlocked iPhone 5 from Apple when it is released and use it out of the box as a wifi device without needing unlock codes and sim cards? I do not plan on getting phone service right away and would like for the device to be functional (basically like a real expensive iPod) until i'm ready to get service.

    Meg is correct, unless you activate it using a microSIM if it is a GSM phone (and starting service with a CDMA phone) you will not be able to do anything with your new phone except call 911.
    Why not just wait and buy it when you can afford service?

  • HP 8600 pro how to use the speed-dial to fax

    I cannot figure out how to input my speed dial numbers on the printer screen
    I have entered my names and numbers already
    This question was solved.
    View Solution.

    Hi HPUserGeorgia
    You can setup up numbers or letters for each fax.
    Touch the fax icon, book icon, sort, select desired one. (01-75, a-z)
    Then go to the home screen.
    Touch the fax icon, # sign then desired number to fax to. (example 05)
    You can print out a list of the all the fax numbers in the menu.
    Here is a document for faxing with the Officejet Pro 8600 Plus.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02921161&tmp_task=useCategory&cc=us&dlc=en&lang...
    Hope this helps.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Can I use the LAN port out of the network?

    I just bought an Express to use with a neighbor. They have a desk top PC and a DSL modem. If we plug the modem into the extreme, can I just plug his PC into the LAN Port without having to configure it to the Extreme (we don't want to create a linked network, we just need the signal to pass through like a router)? Ideally, this is what I want, for them to not have anything to deal with, just me setting up my own laptop and leaving their system be.
    Will our computers be linked at all if the wireless aspect of it is only being used for my g4 ibook?

    cactus101, Welcome to the discussion area!
    You mention Express and Extreme. I'm going to assume that you are connecting the PC to the AirPort Extreme base station (AEBS).
    Yes you can plug the PC into the AEBS's LAN port. The PC will be configured to use Ethernet and DHCP to get an IP address. The PC doesn't won't even know that the AEBS exists. It will only know that a router exists and it is connected via Ethernet.Will our computers be linked at all if the wireless aspect of it is only being used for my g4 ibook?Yes they will be on the same network subnet.

Maybe you are looking for