Re: Validating phone numbers using Yaromat

MM/DD/YYYY
Thanks Mick!
Akani

It does not have a phone number check function. You will have
to separate
the phone number into various fields or build a custom one
and attached it
to the submit button (onclick) or the form.
See:
http://www.smartwebby.com/DHTML/phone_no_validation.asp
"Akani" <[email protected]> wrote in message
news:[email protected]..
>
> Hello folks:
>
> I am very new in this forum. Can you please tell me how
I can use
> Yaromat to validate phone numbers? I see that it
validates dates,
> email, text fields, numeric etc.... but how about phone
numbers? Please
> help. Thanks
>
> Akani
>
>
> --
> Akani

Similar Messages

  • Validating phone numbers using Yaromat

    Hello folks:
    I am very new in this forum. Can you please tell me how I can
    use
    Yaromat to validate phone numbers? I see that it validates
    dates,
    email, text fields, numeric etc.... but how about phone
    numbers? Please
    help. Thanks
    Akani
    Akani

    It does not have a phone number check function. You will have
    to separate
    the phone number into various fields or build a custom one
    and attached it
    to the submit button (onclick) or the form.
    See:
    http://www.smartwebby.com/DHTML/phone_no_validation.asp
    "Akani" <[email protected]> wrote in message
    news:[email protected]..
    >
    > Hello folks:
    >
    > I am very new in this forum. Can you please tell me how
    I can use
    > Yaromat to validate phone numbers? I see that it
    validates dates,
    > email, text fields, numeric etc.... but how about phone
    numbers? Please
    > help. Thanks
    >
    > Akani
    >
    >
    > --
    > Akani

  • How does one format "phone numbers" using "Numbers"?

    Want all phone numbers to format as (555) 555 5555
    How is this done?

    Hi Thomas,
    The old Numbers will be on your computer unless you deleted it. Look in a folder called iWork '09 inside your Applications folder. Launch Numbers 2 (Numbers '09) and do what you used to do to create a Custom Cell Format. For example, you might want a nine-digit phone number to appear as (123) 456 789.
    Save that document. To protect it from Numbers 3.0, make a copy of that document with a different name. Ensure that both your original Phone Number documents are closed (to protect them from that bully Numbers 3.0). Then Open the copy in Numbers 3.0. The custom format will be listed in Format Inspector > Cell > Data Format
    Type a nine-digit number into any cell and format the cell with Format Inspector > Cell > Data Format > Phone Numbers.
    Note: copying a cell with Custom Format in Numbers 2 and then pasting into Numbers 3 does not work. The pasted cell ends up as Text, and the Custom Format is not added to the Data Format list.
    Regards,
    Ian.

  • How can I make iMessage work on 2 iPhones with 2 different phone numbers using the same Apple ID?

    My work requires me to split time between two countries (Ph and Bn). I had an iPhone 4 with a Ph number and a Nokia for the Bn number. iMessage was running on the iPhone 4 with the Ph number and my apple ID. I recently replaced the Nokia with an iPhone 5 which I set up using the iCloud back up of my iPhone 4. I cant seem to set up iMessage (and Facetime) the way I want it to work on the iPhone 5. Im not sure if iOS 6 would allow me to do this so I'm throwing this out to the forums to check if its possible.
    iPhone 4 w/ iOS 6
    - uses Ph sim card
    - Ph number set in Phone>My Number
    - iMessage>Send & Receive has the following data
    Ph Number - greyed outand checked
    Apple User ID - checked
    iPhone 5 w/ iOS 6
    - uses Bn sim card
    - Bn number set in Phone>My Number
    - iMessage>Send & Receive has the following data
    Ph number greyed out and not checked
    Same Ph number checked
    Apple User ID checked
    Ive tried turning on/off my iPhone 5 and logging on and off iMessage but I cant seem to get it to update the iMessage phone number to the Bn number. Any idea how I can do this?

    I believe because you migrated from a Nokia to an iPhone you need to register the Bn phone number with your Apple ID so it can be used for iMessage. The Pn number seems to be the only one registered
    Go here > https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/
    Manage your Apple ID and see if that does the trick
    Hope that helps

  • Why can't I lookup phone numbers using my iPod Touch?

    When I google "Pizza Hut" on my iPod Touch (using Safari), it finds the nearest Pizza Hut to my house, but instead of displaying Pizza Hut's phone number, it display an icon that says "Call".  When I press on that icon, nothing happens.  Can I get my iPod Touch to show me the phone number instead of prompting me to make a call?  I don't have the ability to make calls on my iPod Touch.

    Try using another browser like the free Chrome browser.
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Going to Settings>Safari and Clear Cookies, Data and History

  • I have four devices on one Apple ID, i have separate emails and phone numbers for each device but when I tried to add one to my iPod, it said that the email was already in use.

    I have four devices on one Apple ID, i have seperate emails and phone numbers for each device but when I tried to add one to my iPod, it said that the email was already in use.  I have tried many things and the only guess I have is that either someone else has this email as their iMessage but is fake or it wasn't taken off my old iPod when I reset it.  Any ideas on what to do?

    Thanks but that doesn't give me the information I need.  I am putting an email on my ipod for people to contact me for iMessage and FaceTime but when I put the email in, it gives me an error saying that the email cannot be veirified because it is already in use.  My Apple ID can be varified, just not the email that they will contact me with.

  • Family of 5, all use the same Apple ID/Password/Account.  In settings/messages/send recieve you can "check" my email and up to three phone numbers.  Essentially allowing all iMessages to be sent

    Family of 5, all use the same Apple ID/Password/Account.  In settings/messages/send>recieve you can "check" my email and up to three phone numbers.  Essentially allowing all iMessages to be copied to shared account numbers.  Please help me figure out  how to prevent my children from recieving my text correspondence. 

    On the devices for the members of your family that you DO NOT want to see your iMessagees, go to
    Settings App
    Messages
    Send and Receive
    You should see a list of available contacts which would make messages appear. Make certain that each family member has their own individual contact and NOT the same one that you use. I find it useful to have each family member have their own icloud email and use that for iMessaging my kids. My kids do not have iPhones, but if yours do, their phone number should be listed as well. For iPads and iTouches, use icloud email addresses. If you need to send a message to all 3 kids, say, you can just add all three emails to the To box on your iMessage.
    Hope that makes sense.

  • HT3529 iMessage appearing in 2 different iPhones with distinct phone numbers but using same apple ID

    I and my friend both use same apple ID. When someone sends me an iMessage to my iPhone, it goes to his iPhone with separate phone number also. When I send someone an iMessage from my iPhone, the message will appear as sent from his iPhone also. But the receiving person will get only one iMessage (from my number).
    Both of us have ios 6 and separate phone numbers but same apple ID.
    How is this possible?
    When I checked setting on iMessage on my phone, send and receive shows my phone number and email address only.
    Has my iPhone been hacked by him?
    Please help

    cheonweb wrote:
    iMessage is linked to a phone number AND an email (Apple ID) address.
    Sorry for bugging cheonweb but I just want to be clarified:
    1) If the phone numbers are different but the Apple ID is same, he would still get iMessages sent from/to my Phone number?
    2) Why is it not vice versa? Why do I not get messages sent from/to his iPhone?
    Thanks in advance

  • I have two different 5s's with two different phone numbers but they are both using the same iCloud/apple account. After upgrading to iOS8 when I get a phone call on one phone both phones ring.

    I have two different 5s's with two different phone numbers but they are both using the same iCloud/apple account. After upgrading to iOS8 when I get a phone call on one phone both phones ring. One phone is for work and one is for private and I don't need both phones to ring from one call. It's bizarre.......is this supposed to be like this? If so where can I turn it off?? And while we are at it iOS8 has installed iBooks on both of my phones and iTunes won't let me uninstall it. I don't need or want iBooks on my phones.

    Hi,
    There are two easy fixes to this.
    One, you can set up Family Sharing, in which you can have two different iCloud Accounts, yet still share the same apps, music, media etc.
    Two, go to Settings and turn-off "Handoff". This can be found under the General page.
    Hope this helps!

  • My wife and I want to swap her 4s for my 4 while a take a short trip out of the country.  We use the same email address for itunes but different for email.  Can we just change our phone numbers and email addresses so we get our own messages?

    My wife and I want to swap her iphone 4s for my iphone 4 while I take a short trip out of the country.  We use the same itunes account but have different email accounts.  Can we just change our phone numbers with our carrier and change email addresses on our phones so we get correct messages, with out disturbing our other apps?

    The email is simple. Just delete her email acoount on her iPhone and configure your account into the phone and then do the same for her on your phone.
    The harder issue is that to switch the cellular phone service you will need to switch the SIM cards and the two phones do not use the same size SIM card.

  • How do I sort my phone numbers inside a contact? (using custom labels)

    Alright, since I've converted to iCloud, I'm now adding new contacts in there. However... before I was adding phone numbers through Address Book on my Macbook (that ended up creating a conflict with iCloud so I'm now using iCloud). What I want to know is... in address book you can set up a "default template" for your contacts (to include spouses, children, multiple addresses, phone numbers etc) I have created several labels for phone numbers, so I know which carrier they are since most of my contacts have 2-4 cell phones (all different carriers). Anyways, in address book I have for example ATT as the primary one on the list and then example: Verizon, Sprint, Tmobile & last the home phone). I have it set in that way, so even if someone only has ATT & Sprint, ATT will be at the top. Since I switched to iCloud (the carriers are all jumbled around in the contact and the reason I had placed them in a specific order is because I have one or two of those first carriers). Please let me know if you know how to change this in iCloud? Thanks!!!

    Fair enough.
    I started doing this before unlimited data and emails on phones was a common commodity, on my Samsung Blackjack.
    I then continued it due to its convenience. My only counter argument is this:
    Even when emails are set to immediately push, I am always notified earlier by this forwarding message (sometimes by several minutes/hours due to the fact that it is not dependent on my being connected to 4G or wifi to receive it.
    Also, to contradict snozdop's point that both methods use data and battery, I say this - when I use the forwarding method, the information comes in a pure text format and therefore uses considerably less information than an HTML and CSS rich email, with embedded images and such -also, unlimited text messages aids curve costs.
    I will, however, give this method a go. In any case, a solution to my original question would still be greatly appreciated.
    Thanks guys.

  • Using notes on iPad: how do I prevent numbers from being displayed as phone numbers?

    Using notes on iPad how do I enter numbers such that notes thinks that they are just numbers, not phone numbers, links, or calendar events?
    Example:
    Enter the line "Number: 00012345678".  The number is highlighted in yellow, tap it and I get the options to "Send Message", "Add to Contacts", or "Copy".
    Enter the line "Numlet: 9H". The "9H" is highlighted in yellow, tap it and I get the options to "Create Event", "Show in Calendar", or "Copy".
    I don't think this is an iOS 7 problem.

    Personally, I think that an App like AirWatch would be overkill for the average home user and form the very little bit that I know about the app, it would not make sense from a money standpoint - IMO anyway. I don't use any third party app to manage devices.
    I manage four iDevices in my iTunes library on my MacBook Pro. All four devices are mine, but all of them have their own unique content on them so it does take a little bit of extra attention to detail when I sync and make changes to the sync configuration. And because I share my Apple ID with my wife and daughter (who each have their own MBP laptops) every now and then I inadvertently download a previously purchased app that I didn't want (I delete more Disney apps than you can shake a stick at) and I scratch my head trying to figure out where that app came from.
    I guess what I'm trying to say is, again IMO - that you can get the hang of keeping everything separate without the purchase of an enterprise app, you just have to be a little more aware of what you are syncing, and pay a little closer attention to what's going on.

  • Is there a way to use hyperlinks for phone numbers in keynote?

    Hey all,
    does anyone know if it is possibile to export phone numbers as hyperlinks in keynote (export format: pdf), so that my phone directly dials the number if I open the pdf and click on it. In other programs I can use "tel:+countrycodeandphonenumber" instead of the url in the hyperlink setup, but unfortunately that does not seem to work with keynote.
    Best,
    Hanna

    Keynote provides for hyperlinks to slides in the currently used presentation, other Keynote files, web pages and to launch a pre-addressed email message. All other hyperlinks are prevented. Not sure why you would want to use a slide presentation application for such a task during a slide show.

  • Did not know simple things such as removing hyphen from phone numbers will be so complicated. How do i remove the hyphen from stored phone numbers since i am not able to make a phone call using VOIP. Everytime i make a phone call i have to type the number

    Did not know simple things such as removing hyphen from phone numbers will be so complicated. How do i remove the hyphen from stored phone numbers since i am not able to make a phone call using MobileVOIP. Everytime i make a phone call i have to type the number.

    Go into your contacts and edit them.

  • Using the calendar can I copy and paste phone numbers.

    Using my iPad mini can I copy and paste phone numbers on the calendar from different weekdays?

    I"m not sure exactly what you mean, but if I go into an appointment and open that appointment. I'll then see an 'edit' button. I tap on that to bring up a pop up with the details of the appointment. In there I can select and copy text, then I can make a new appointment and paste that text into a new appointment on a different day.

Maybe you are looking for

  • Unable to read or download pdfs

    When I click on a pdf file I get a white screen and the spinning color wheel, but it never displays or downloads the pdf. I have tried right-clicking and the command-click to invoke Preview but then I only get a pull-down option that says "Copy link.

  • Open file dialog for a server

    Hi, I'm trying to write a class that will show something like JFileChoose.showOpenDialog but for server files. It's pretty simple, I'm passing a String array in the show() method. I tried to mimic the behavior of JFileChooser where the showOpenDialog

  • Restoring preference files in FCP 7.03

    I trashed my preference files in FCP (com.apple.finalcutpro.plist and under Final cut Pro User Data: FCP 7.0 prefs, FCP Pro Obj Cache and FCP Prof Cache) I emptied my trash. I then repaired permissions, restarted, and relaunched FCP. But.......com.ap

  • Using AQ in Generic Exchange

    Need help in resolving transport error when using AQ's in transport (Generic Exchange) looks like its getting everything , not sure what the actual error is 2008.04.26 at 14:33:01:379: Thread-26: B2B - (DEBUG) Endpoint: aq://AQB2BTEST@orar09d:3117:R0

  • HT4623 after downloading IOS7 in my iphone, my bluetooth in my car failed to connect. pls. advise

    after downloading IOS7 in my iphone , my bluetoothe in my car is not connected. tried to set up bluetoothe setting but failed. any solution or advise.