Re:Valuation control at Storage location

Dear Guru's,
I have below requirement  :
I want to control the Valuation of a material in Storage location or at material level. i.e that particular Raw material will be non-valuated or all the materials in 1 particular storage location are non-valuated materials
I know that can be control at Plant/company code level ( Plant as valuated or not valuated )
Also is it possible to mantain same raw material code as Valuated in 1 plant & non-valuated in other company code/Plant ?
Kindly guide
Regards,
Ishwar

Hi Ishwar,
If you had mentinoed your business requirement then it would be easier for us to resolve your issue. However it wont be possible to have valuation control at Storage location.
but you can have some alternative solution.
1. Create New Material Type (say ZXX) which should have only Qty update Ticked ( Do not ticket Value update Checkbox).
2. Create Material Code of Newly Created Material Type (ZXX) . These newly created Part code will not be valuated.
Also is it possible to mantain same raw material code as Valuated in 1 plant & non-valuated in other company code/Plant ?
It is very much possible to have Same part code to be valuated in 1 plant and non-valuated in Other Plant, Provided your valuation occurs at Plant level and not the company code level.
Regards,
S Anand

Similar Messages

  • Stock report in BW (valuated stock and Storage Location level)

    Dear All,
                Regards.We got an situation here,
    Case 1:  R3 (MB5B) (Both "Storage loc" and "Valuated stock" shows the same Stock Qty)
    1).The BW Stock Report shows values the Correct Values for "Receipt Qty" and "Issue Qty" with the Correct  "Quantity total Stock" aswell.
    Case 2 :   R3 (MB5B) (Stock is different between "Storage Loc" and "Valuated Stock")
    1).The BW Stock Report shows the  "Quantity Total Stock according to VALUATED STOCK Level(MB5B),but  the "Receipt Qty" and "Issue Qty" according to STORAGE LOCATION Level(MB5B) .
    We followed the "How to Handle Inventory "Doc with the proper sequence of Loading of Infosources and Compression.The data is sitting fine at the cube level.
    It would be great if someone can throw some Light on this issue,on how the Query shows a COMBO of both Valuated stock and Storage Location stock....Held up with this issue for quite sometime..Had a look at the   Oss Note (589024)...........
    Manythanks
    Arun

    HI,
    In Inventory we have two quantity fields given to satisfy the requirement.
    Valuated stock Qty - 0VALSTCKQTY
    Storage Location qty - 0TOTALSTCK
    You can make use of them based on your requirement. Hope this helps for you.
    Thanks,
    Arun

  • Stock valuation down to Storage location level

    Dear all,
    System setup for stock valuation is till Plant level. And understand that's how data stored in table MBEW and MBEWH until plant level only.
    Eventhough that is system standrd, is that possible to get the stock valuation until Storage location level?
    For eg: In MB5B, there is opening stock, closing stock and the material movement posting. I need to get opening and closing stock for each storage location.
    Could you please comment if there are tables store these data? Kindly comment.

    Hi Afshad Irani,
    Thanks for your reply. Understand from the previous post that stock valuation for storage location can be done via table MARDH or report MC.9, but this tools are excess base on period/month basis.
    My case, i need to report storage location stock for both (1)last month 06.2010 and (2)yesterday's stock 06.07.2010. So i can use MARDH table to report (1)last month stock for each storage location. While for (2) yesterday stock, table MARDH isn't help.
    Could you please advice further?

  • Set valuation type by storage location

    Is there a way to limit specific valuation types to a storage location?  We have reclaimed materials that we would like to assign to a specific storage location.  For example, we have storage locations 1 through 4 for new materials and storage location 5 for reclaimed.  Is there a way to restrict the receipt of reclaimed materials into storage location 5 only?  We do not want to see any reclaimed materials in storage locations 1 through 4.

    valuation only takes place at plant level, so you cannot restrict it at storage location level with standard customizing, you can only check this in a user exit.

  • MB5B Valuated Stocks or Storage Location

    Hi All,
    When I run MB5B for Valuated Stocks it giving me stock volume which matches what MB5L states.
    However, when I run it for Storage Location it is giving me a different volume.
    Which is the correct transaction to based closing stock volumes off of.
    Many Thanks,
    Brian

    Hi,
    Usually it is recommended to execute MB5B for valuated stocks. you need to check the input parameters which you are passing, give a sufficient date range and check for back dated material movement postings.
    Regards,

  • Valuated Stocks at Storage location Level

    Hi Gurus,
    Our client wants to develop a report on Quantity and Value of the Stocks at Storage location level. Is there any standard table/T.code where we can see this? We have tried in the Standard reports too.
    We have tried this getting from various tables like MARA,MARC,MARD,s031 & S032. But it is hitting the performance heavily. Please advice if anything can be done on this.
    with regards,
    Saakithyan

    Refer this link
    http://wiki.sdn.sap.com/wiki/display/ERPSCM/StockTablesandStockTypes
    check reports: MC.9 ,S_p00_07000139 also if it fits

  • Storage Location valuation level

    Hello all,
    We are using moving average price (MAP) at plant level valuation. We have several Storage Locations assigned to the same plant. We have several Client non-valuated goods-receipt at Storage location. That increases the quantity, but not the value. Therefore, of course those actions
    changes the MAP. We are not using batches or WM module.
    How can we not change the MAP without using batches? Is that possible to put a valuation level at storage location?  
    Can anyone help us to solve this problem?
    Thank you in advance very much!
    Best regards,
    Pedro Grabulho.

    No you do not have to change OU which is plants in your case.
    1. The procedure is to activate split valaution using OMW0(zero) t-code, which is active in your case, I guess.
    2. Define Global Valuation Type. You can define Storage locations here or it can be any thing else. Use T-code OMWC. (BTW, every time you add one storage location, you have to make appropriate changes here also, It is not like your storage location becomes valuation type)
    3. Define Global Valuation Categories.
    4. Attach Categories to OU. (OU can either be Plant or Company code, there is no 3rd option). You can atttach in one or more OU(plant)where you want it active. 3rd & 4th steps are in the same T-code OMCW.
    5. Using the MM01 now extend the material to the newly created Valuation Types. (Accounting 1 view)
    Thanks,
    Ashish

  • Allow negative stock on storage location

    Dear all,
    When we allow negative stock on a storage location. At posting time we have an error "deficit stock of batch assignment". Anybody got a clue of what has to be done to correct this ???
    Cheers,
    Olivier

    Dear Oliver,
    Please do the following checks.
    Prerequisites
    To work with negative stocks, you have to:
    · explicitly allow this in the Customizing system for each valuation area and storage location
    · set the indicator Neg. stocks in plant in the material master record of the individual materials (storage data)
    Negative stocks are allowed for special stocks if you have activated negative stocks in the valuation area and for the special stock concerned in the plant. You do not need to activate negative stocks in each material master record.
    Procedure
    You can define whether you want to allow negative stock by making the relevant settings for each storage type in Customizing.
    To do this, choose Logistics Execution -- Warehouse Management--- Interfaces -- Inventory Management -
    Allow Negative Stocks in Interim Storage Types --- Allow negative stock for each storage type in the Implementation Guide (IMG).
    When the allow negative stock indicator is set, the system lets you post negative quants to the corresponding storage type.
    Additionally, you can define whether you want the system to issue an error message (E) or a warning message (W) or no message (blank) when posting negative stock. You can make the relevant setting in the activity Control of System Messages in Warehouse Management. You can determine the notification type using the parameter MSV in the user master record.
    To do this, choose System --- User profile --- Own data.
    Then select the tab page Parameters.
    Enter MSV in the Parameters field and enter the value with which you want to group certain users in the value field (for example 01).
    Choose Logistics Execution ® Warehouse Management ® Interfaces ® Inventory Management ® Allow Negative Stocks in Interim Storage Types ® Control of System Messages in Warehouse Management in the Implementation Guide (IMG).
    Create a new entry with the version number (Value) you have chosen and enter the desired system reaction in the Message Category field (E, W, or blank).
    Regards
    Mangal

  • Stock valuation different for different storage location in same plant

    Hi SAP Gurus,
    Please provide me a detailed idea and solution for this.
    My client has simulated several transactions in MM.
    Say it has two storage location 1110 and 1120 under plant 1100
    Now in 1120 there are stock movements pertaing to a project (includes stock transafers from 1110 and issues made to project)
    Finally, the MB52 report is showing valuation of stock (unrestricted) at different rates for 1110 and 1120.
    My client is raising issue, saying the value should be same for stock under a single plant as valuation is done at plant level.
    Also, both the stock is under unrestricted category, so valuation should be same.
    What could be the issue?
    Any solution?
    The auditors will raise issue over this.
    Please help ASAP.
    Regards,
    Sumit

    Hi Sumit,
    In valuation using the moving average price (price control u201CVu201D), the system valuates goods receipts with the purchase order price and goods issues with the current moving average price.
    So, for Plant 1110 the rate could be the PO price used for procuring the material whereas for Plant 1120, it is the moving average price and hence the difference in rates.
    However the auditors would look after the Material Valuation at the Valuation Area level which is the Plant.
    Thanks,
    Ankur

  • Report by month with Valuated stock and special stock by storage location

    Dear All,
    I need a report similar to MCBE with stock level (including "storage loc/batch Stock" plus "special stock(Q)") by plant and storage location.
    I try it with MCBE tcode, but i only get  "storage loc/batch Stock" in column named valuated stock. Also I can obtain that information in MB5B tcode, but I cannot get data by storage location, only plant.
    Does anyone know how can solve it?
    Thanks in advance,
    Sebastiá

    Hi,
    Use MC.9 T.code.
    click on "switch drilldown" and select storage location.
    Regards
    Hari

  • Valuation at Storage Location Level

    Dear Experts ,
    We need to transfer Stock from Storage Location to another Storage Location. MVT 311
    The problem is that we want the system to create Financial Document during this step, And as we know valuation is on Company Code or Plant Level .
    So What help us to execute this is it profit center or Business Area or what ?
    Please Advice

    Hi,
    Try this,
    You can follw this following process for Stock Transfer between Depots (locations):
    Material should exist in both the plants (Delivering & Ordering),
    Internal customer should be assigned to the ordering plant ( MM -> Purchasing -> Purchase Order -> Setup stock transport order -> assign the internal customer to the ordering plant and assign the Sales area of the internal customer)
    T-code : OMGN
    Assign its Sales area to the delivering plant
    Assign the document type and Delivery type NB and NLCC
    Assign the Supplying plant --> Receiving Plant --> NB
    Take the delivering plant and assign the sales area.
    Vendor master has to be created and assign the supply source ( Delivering Plant).
    Create a purchase order ME21N (Purchasing Document type UB)---> Save
    Delivery - VL10 B ---> Calculation rule (appropriate) --> Assign the purchase order number here and execute.
    Select the Delivery creation line and do the back ground process.
    Start the log display and see the delivery document number by the documents button
    Go to VL02N --> do picking and PGI --> Then do the MIGO with respect to the delivery document.
    Subsequently yopu can also issue stock transfer Invoice (which is treated as Proforma Invoice & not posted in accounts) for records or to be given with vehicle.
    Hope this helps...
    Regards
    KK

  • Storage Location for NON valuated material in MIGO

    Hi friends ,
    I have created a purchase order for NON-Valuated material (UNBW) with Account Assignment "K".I did check the material type UNBW configuration where only Value Update is checked for my Plant.
    Now at the time of MIGO , system is asking for Storage lcoation (mandatory) and after MIGO system also updates quantity in Storage Location entered in MIGO.
    while in normal cases (like ROH material type) , if we create Account Assigned PO ( like K) , system neither ask for Storage lcoation at the time of MIGO , nor system updates Qty at any storage location.
    As per my understanding , if we create Purchase Order with account assignment K , system updates value in consumption and doesn't update Qty in stock (although material is stockable) .....which is simply like immediately issue of material to cost center.
    Therefore wondering why system is updating Qty for NON-VALUATED material.
    Does non valuated material means , POST value to Cost center (for account assignment K) and Update Qty in stock ?
    Like in case of Account Assignment , value gets charged to WBS and qty gets updated as special stock "project"
    All replies are welcome .....
    Regards
    Shrey

    By definition UNBW's are ony qty updating and have no value assoicated with them. Since the system needs to stock this qty somewhere it by deafult asks for a Sloc.

  • Storage Location Control and ATP

    Hello Experts,
    I have activated the storage location control for the putaway process and is working fine for MM and WM perspective. The following are happening without any problem:
    1. Doing a GR to the virtual Storage Location and this storage location is blank in TR.
    2. The stock from the virtual storage location is considered in MRP while planning.
    3. TO creation from TR and doing putaway in real storage bin and Transfer posting 311 at IM level.
    The requirement is: The stock from the virtual storage location should not be considered in the ATP while creating a sales order. At the moment, ATP is considering this stock as available and confirming to a date immediately but in reality it should not up until the putaway is complete. And I think this is the sole purpose of having Storage Location Control in place.
    I did my research in this fourm and looked at the Warehouse Management Guide and it says "This means that for the duration of the putaway process, the stock for putaway is either not visible at all or clearly visible as stock that can not be picked, depending on the configuration of the availability check."
    Can someone help me understand what to check or uncheck in ATP? Or should I post this question in the ERP-SD forum?
    Appreciate you help.
    Regards
    Narottam

    Hi,
    I believe your mistake is here:
    "800 K15 0800 8001 411 check box is checked "
    The combination should read
    800 902 0800 8001
    The storage type is the interim storage type, that is where the posting shall happen. And if you leave out the check box it happens automatically.
    But why movement type 411? This usually should be 311.
    Best regards
    Juergen

  • Difference in VAluated and Storage location Stock

    Hi SAP Gurus,
    I'm facing following problem during viewing Stock on Posting Date (MB5B)
    For a perticular material, perticular plant, particular period
    When I view storage location /Batch Stock (storage location not specified): Lesser Stock is shown
    When I view Valuated Stock stock shown is more.
    What may be the problem
    Regards

    Dear Ranjan,
    I am using T.code MC.9 and MC.1
    when i am executing the MC.9 for all materials
    some of the materials with ZERO stock i mean valuated stock is ZERO but its showing value of the Valuated stock. same case with MC.1 also which is storage location wise
    for a ZERO qty in storage location its showing valuated stock,
    i have raised an issue to SAP they are working on it , we have open our PRD system to check SAP people.
    Regards
    venu gopal

  • Storage location wise project stock valuation

    Hi all,
       I am tying to generate a report for storage locationwise project stock valuation. MBBS is giving the data valuation type as well as WBS element wise valuation.That is fine. I want to show the data storage location wise. So, I have taken MSPR table where I am getting data storage location wise. For this stock, i am picking up unit price from QBEW table. My user says there will be cases that the material comes in with different prices in a same financial period.Here I am facing issue when there are two prices for the same material with same Val.area and same WBS element .Pls tell me how can I pick up the correct price.

    Hi,
    If stock with different price under 1 plant and 1 WBS Element put into different storage location based on the material price then in table MSPR we can have LGORT (storage location) as indicator there. Otherwise, since valuation type is not implemented, there is no other way you can differentiate stock based on price as you mentioned before.

Maybe you are looking for