RE: VC Templates not available

Hi Everyone,
We are trying to view the templates fros a track from NWDI in VC 7.1. But the templates are not visible for the users.
The error log as follows...
Message: [VC-DevServer][]Execution of actionListSoftwareComponents of service CompLibManager failed : Reason : null
Category: /System/Server/DevServer
Location: com.sap.ds.core.processor.impl.ServiceInstanceProcessor
Application: sap.com/VisualComposerServerEar05
Thread: Thread HTTP Worker @886982024 ,5,Dedicated_Application_Thread
Data Source: j2ee/cluster/server0/log/system/server_00.log
Arguments:
DSR Transaction: b119669077c811dece7f0003baa4a7c3
Message Code:
Session: 221842
Transaction:
CSN Component: BC-DWB-VC-SRV
DC Component: developmentserver
Correlation ID: 5842250000000004
DSR Root Context ID: 934598F077C811DEB6A70003BAA4A7C3
DSR Connection: b119669077c811dece7f0003baa4a7c3
DSR Counter: 0
Log ID: 0003BAA4A7C368990000001600000DD8
Please help...Thanks

Hi ,
The error message you attached is the top level error hence provides no information. You can try to reproduce the error again and then when you look into the default trace look for the first error message that matches the timestamp. If you attach that I might be able to provide you more information.
Thanks,
Nati

Similar Messages

Business Intelligence Template not available

Hi,
I just upgraded a SP site from 2010 to 2013. And have turned on performance point services etc at both the site collection and site level. However, When I try to create a Business Intelligence subsite, that template is not available for me to select. Any
ideas of what I can do to fix this issue?
Sherazad

Verify if PerformancePoint is correctly associated with the web application. Refer to the following post for more information.
http://blogs.lessthandot.com/index.php/datamgmt/dbadmin/mssqlserveradmin/sharepoint-2013-bi-part-10/
http://sharepoint.stackexchange.com/questions/72176/where-can-i-found-and-how-can-i-configure-bi-center-site-collection-sharepoint-o
Cheers,

Fiori Launchpad - tile templates not available

Hi ,
In one of our client environment , only UI addon ( sp07 ) is installed in gateway system and custom SAPUI5 apps are developed.
I want to use New Fiori launchpad for catalog and tile creation . i am able to create catalog but when i try to add a tile the templates are unavailable.
Does tile templates are available only when one of the fiori UI component is installed or it available as a part of UI addon.
Right now i have to use old launchpage for tiles.

Hi Masa,
I have already implemented this note earlier , but now this note is updated with more patches of UI library, can updating the UI library to latest version will solve the problem ??
Regards
Yashpal Gupta

Shared Component User Interface Templates not available for page use.

Hello.
I created a new User Interface Template using the wizard under shared components. All it's supposed to do is display a header image on the page. I can click on the title under User Interface Templates and it will display fine. If I try to use that template, it will not display as an option under Display Option use custom template LOV under the Main tab of page modifications. Shouldn't it be available here for selection? I couldn't find any access grant options under Shared Components that might have explained this problem.
Thanks.
Kurt

Does anyone else have this problem? How did you fix it?

UI Templates Not Available

Hi,
I would like to create some UI Templates. The problem is that
the Shared Components link in the Application area is simply not
present. I log in as portal30 admin and still no link. Has
anyone experienced this problem before. I am using Portal 3.0.9.
Thanks,
Rebecca

I'd like to add that there are several errors with this
Double-click extension. It would not install on a Windows XP
machine with CS3, stating "This extension requires Macromedia Flash
MX or greater. Quitting." Oh, CS3 isn't greater??
Also, I found the Window > Other Panels on my Mac version
(where the extension did install but doesn't show up on the welcome
screen) and when I try to open the Motif Panel, I get several
Javascript errors and the panel opens up with blank content.
I will be sending a note to the author of the tutorial. Users
trying to develop Flash ads with the Flash Ad Kit be warned - it
doesn't work!!

Room Templates not Available

Hi All,
i want to create collaboration rooms using the standard templates provided by SAP.
i downloaded home_area_content_templates_fullupdate.zip to my PC. when i extracted the zip file i get ice-content file. i uploaded this file to room_extensions -> cm_stores -> TEMPLATES.
from the SAP help it is given that when i download the ice package, the 3 room templates InformationSite, ProjectRoom, and TeamRoom appears under room_extensions -> cm_stores -> TEMPLATES.
but in my case i see only ice-content file and not the room templates.
can anyone give me procedure to bring the room templates to the KM repository.
Thanks in Advance
Regards,
Kavitha

Hi Praveen,
Thanks for the response.
I followed the procedure mentioned in the help. but i get "IO Exception" when i upload the file using Content Management -> Content Exchange -> Package Upload.
what should be done in order to upload the room template package to the KM repository.
Thanks in Advance.
Regards,
Kavitha

Saving master page in search template throws error "UserAgent not available, file operations may not be optimized"

Hi Folks,
I was trying to save basic search template master page "seattle.master" after making change to the template.
I have added just "CompanyName" folder and update the line below in seattle.master.
Change is this : <SharePoint:CssRegistration Name="Themable/CompanyName/corev15.css" runat="server"/>
When I save it, and refresh page on browser, it shows "Something went wrong" error.
ULS says the following error : "UserAgent not Available, file operation may not be optimized"
Pls let us know if there is a solution.
Any help Much appreciated !
Thanks,
Sal

Hi Salman,
Thanks for posting this issue,
Just remove this below given tag and check out. It might be happened that your control is conflicting with others.
Also, browse the below mentioned URL for more details
http://social.msdn.microsoft.com/Forums/office/en-US/b32d1968-81f1-42cd-8f45-798406896335/how-apply-custom-master-page-to-performance-point-dashboard-useragent-not-available-file?forum=sharepointcustomization
I hope this is helpful to you. If this works, Please mark it as Answered.
Regards,
Dharmendra Singh (MCPD-EA | MCTS)
Blog : http://sharepoint-community.net/profile/DharmendraSingh

Sharepoint 2013 Workflow not available on Site created from Sharepoint 2013 Foundation Solution Template

If I create a template on SharePoint 2013 Foundation, then create a site on SharePoint Enterprise (or Office/365) fully configured to support SharePoint 2013 workflows. When I access the site through SharePoint Designer 2013, and attempt to create a workflow
SharePoint 2013 Workflows are not available -- you get message that SharePoint 2013 Workflow platform is not available because it is not configured on the server. This appears to be a bug in SharePoint Designer as the 2013 Workflows are available on the team
site on the same site collection. There is no reason that a site created from a SharePoint 2013 foundation template should have this restriction.   To make matters worse if you then save that site as a template on the SharePoint 2013 Enterprise (or
Office/365) system and create a new site from the that template you get the same issue.
Anyone know a workaround/fix to this issue.   Have imported the template into Visual Studio but I can not find any way in Visual Studio to enable SharePoint 2013 workflows.   A solution that involves Visual Studio import would work fine
for me.
Earllibby

Apparently you did not read my question very carefully.   The workflow manager is configured properly on this server and for the basic Team site in this site collection the full SharePoint 2013 workflows are available in SharePoint Designer 2013.
BUT they are not available on another site in the SAME SITE COLLECTION that was created from a solution template that was created on a SharePoint Foundation server.
Earllibby

Web service not available in F4 help of document template

Hi ,
I have created a web service using tool WS_DESIGN_TOOL. Its active and status is productive. Now when I am creating document template , I am not able to see this web service in F4. Hence not able to create document template with my web service.
I also tried by copying standard web service and then using it but even that web service is not available in F4.
Do we need to any additional steps so that web service appears in F4 help of document template.
Thanks,
Madhura

Hi,
The service is active in SICF or in SE80 under package $WS_BOL_GEN.
I have assigned Business Transaction . I have followed steps as per below thread.
[Re: CRM 7.0 Document templates;
Any more suggestions are welcome.
Thanks,
Madhura

SAP templates use BAPIs not available in 4.7

We are trying to use the SAP module library templates for PP - We are running 4.7 and do not have access to BAPIs BAPI_PRODORD_GET_LIST or BAPI_PRODORD_GET_DETAIL, two of the BAPIs used in that template.
Any suggestions or help would be appreciated.
Thanks

If these BAPIs were not available in 4.7, then you would probably have to create them. But I was pretty sure the Production Order BAPIs were in existence then. You may want to post on a different board when some more savvy ECC folks would chime in. Are you sure you don't need the Process Order BAPIs? For BAPI_PROCORD_GET_LIST and its fellows were not released until ECC 5.5 (I think).
Regards and Good luck!
Mike

Ionic Side Menu Template - Javascript JavaScript runtime error: [$injector:nomod] Module 'ngLocale' is not available!

I am using VS 2013 ,CTP 3.1
When I tried to run the Ionic side menu template on Emulator 8.1, the javascript console shows below exception -
Exception was thrown at line 9576, column 11 in ms-appx://io.cordova.myapp8724a31325644ec29a8d2d88682b7987/www/lib/ionic/js/ionic.bundle.js
0x800a139e - JavaScript runtime error: [$injector:nomod] Module 'ngLocale' is not available! You either misspelled the module name or forgot to load it. If registering a module ensure that you specify the dependencies as the second argument.
http://errors.angularjs.org/1.3.6/$injector/nomod?p0=ngLocale
There was no code changes to any of the files.
Please advise.

Yes. I am using the same template.
I am not able to attach the screenshot here.
This is the error -
'WWAHOST.EXE' (Script): Loaded 'Script Code (MSAppHost/2.0)'.
Exception was thrown at line 9576, column 11 in ms-appx://io.cordova.myapp8724a31325644ec29a8d2d88682b7987/www/lib/ionic/js/ionic.bundle.js
0x800a139e - JavaScript runtime error: [$injector:nomod] Module 'ngLocale' is not available! You either misspelled the module name or forgot
to load it. If registering a module ensure that you specify the dependencies as the second argument.
http://errors.angularjs.org/1.3.6/$injector/nomod?p0=ngLocale

Include "templates/ztomplarf/98/alv_0.html" not available.

With ITSmobile I try to implement an ALV Grid on the dynpro in a Custom Container, and the error in st22 is:
Template "templates/ztomplarf/98/zrfq_alvstock_200.html" contains syntax errors
and therefore could not be compiled.
Cause of error:Include "templates/ztomplarf/98/alv_0.html" not available.
The syntax error is in row: 112, column: 103
The incorrect HTMLB line is:
" `include(~service="ztomplarf", ~theme="98", ~name="alv_grid.html");"
Thanks and regards.

Hello Javier,
You probably need to regenerate your service, please see SAP help:
http://help.sap.com/saphelp_nw70/helpdata/en/46/668d4b72255de4e10000000a1553f6/frameset.htm
for details.
You could also test with ~generatedynpro 1 to see if the ALV grid is even there in your service, but you should have a template for it. If your service still does not work then you will need to debug.
Edgar

Workflow template - WS72100012 not available in 6.1 - MDGF

Hello Michael
As per your suggestion I tried to replicate the PC and CC hierarchy using workflow - WS72100012. The problem is, workflow template WS72100012 is not available in the system (MDG 6.1).Can you please suggest how to use this template?
Kiran

Hi Kiran,
actually there is no standard workflow, at least from SAP's point of view. We deliver multiple workflow templates to give you basic ideas what you could do - and sometimes what you have to do - w.r.t. to workflows and related processes.
Still the workflow has to fit to your customer's needs. The tool itself is very flexible so that you can design and model a workflow that exactly fulfills the customer's requirements and that includes in special circumstances mandatory or strictly recommended steps by SAP.
So if you do not want to use WS72100012, but you want to use IDOc based replication on MDG-F hierarchies, you should include the tasks of WS72100012 being responsible for the replication in your custom template. Otherwise the replication might fail.
Best regards
Michael

Office 2013 and SharePoint 2013 server properties - The required term set is not available.

Hi,
After creating new document from ribbon with the new document function on any template the managed metadata based server properties cannot be selected and properties boxes are grayed out. Mouse over displays "The Required term set is not available".
Works fine when using it form resource (SharePoint) domain both with user domain and resource domain accounts.
There is a two-way trust btw domains.
SPNs are done for AppPools.
AppPool accounts have delegations and are set to impersonate with GPO.
SharePoint Web Application is on kerberos authentication.
There is no difference when sites are using user or resource domain AppPool accounts.
The WFE and SQL Server have computer delegations.
Server env: Windows Server 2008 R2 with all updates, SQL Server 2008 R2 with all updates, on-prem SharePoint Server 2013 with no CU.
User env: Windows 7 ENT, IE10 and Office 2013 with all updates.
There is no internet connection and internet connection is not possible. The internet connection is cheated with two DNS A record setting for
www.msftncsi.com and dns.msftncsi.com. Also registry changes "ActiveDnsProbeContent" ip- address for Win7 is done via GPO to private IP. This is done because otherwise check-in/check-out does not work.
Last things on IIS log are:
2014-01-24 10:38:36 192.168.n.n PROPFIND /TestDoc - 5445 0#.w|userdomain\test3-user 192.168.51.51 Microsoft+Office+Word+2013+(15.0.4551)+Windows+NT+6.1 207 0 0 639
2014-01-24 10:38:37 192.168.n.m OPTIONS / - 5445 0#.w|userdomain\test3-user 192.168.51.51 Microsoft+Office+Word+2013+(15.0.4551)+Windows+NT+6.1 200 0 0 842
2014-01-24 10:38:54 ::1 POST /_vti_bin/sharedaccess.asmx - 5445 - ::1 Microsoft+Office+Word+2013+(15.0.4551)+Windows+NT+6.1 200 0 0 15
2014-01-24 10:39:25 ::1 POST /_vti_bin/sharedaccess.asmx - 5445 - ::1 Microsoft+Office+Word+2013+(15.0.4551)+Windows+NT+6.1 200 0 0 0
2014-01-24 10:39:56 ::1 POST /_vti_bin/sharedaccess.asmx - 5445 - ::1 Microsoft+Office+Word+2013+(15.0.4551)+Windows+NT+6.1 200 0 0 15
2014-01-24 10:40:27 ::1 POST /_vti_bin/sharedaccess.asmx - 5445 - ::1 Microsoft+Office+Word+2013+(15.0.4551)+Windows+NT+6.1 200 0 0 15
What I missed.
Br,
-timo-

Same problem here!. Giving the computer network access allows the control to be populated. Then I disabled and restarted and it seems to be ok....

Office 365 : SharePoint designer workflow platform not available

Hi,
We have Office 365 E3 subscription and I am facing issue creating any SP2013 designer workflow for the sites created via Custom Web Templates ?
The option to create designer workflow with "SharePoint 2013 Workflow platform" is unavailable with message..
"The option for SharePoint 2013 Workflow platform is not available because the workflow service is not configured on the server, please contact your server administrator"
To add to the issue even if we create 2010 designer workflow, the workflow does not get associated with the list/library. I can see the workflow in SharePoint designer but not with library settings from the browser and of course the workflow is not executed.
Can anyone please suggest any solution ?
Thanks in advance.
Rajesh

Hi,
If you are a tenant administrator please log into your admin account
navigate to this "https://youraccount-admin.sharepoint.com/_layouts/15/online/TenantSettings.aspx"
In this page,under connected services, deselect the "Block
SharePoint 2013 workflows".
Murugesa Pandian.,SharePoint 2010, MCPD | MCTS - Configure

RE: VC Templates not available

Similar Messages

Maybe you are looking for