Re WAP55AG

I would like to be able to use 802.11a 5mhz to avoid interference, I am currently using WRT54GS V.7, is it possible to connect the WAP55AG to the WRT54GS Wireless router, and be able to use the 802.11a 5mhz, or do I need a different wireless router? How would I connect the two?  Thanks to anyone for the help.

The WRT54GS only supports 802.11b and 802.11g. It is not compatible with 802.11a.

Similar Messages

  • How do i use wrt55ag + wap55ag as a wireless bridge?

    i hope this can be done. i've been searching the forums, but don't seem to have found what i'm looking for. i have a wrt55ag v2 w/1.79 firmware. this is connected to the modem for the internet and has the network on this floor connected. i now need to add a network on another floor. there isn't a way to wire it to here. i was under the impression that a wap55ag would do the trick. however after getting it (wap55ag v2 firmware 1.1), i cannot get the two to talk to each other. the wap is using an address withing the router's range. wireless-a settings are the same on both devices. wap is set for static ip addresses. default gateway is set for the ip of the wireless router. i've tried making the ssid the same and different for the devices. still no connection between the two. since i recently purchased the wap, it can go back. so the primary thing would be making the 2nd network connect wirelessly to the wrt55ag.
    any help would be appreciated.
    well, you go have fun with that.

    hi...if you want to use the AP as a wireless bridge it would only work with another AP...if you want it to use it in wireless repeater mode , it would work with either wrt55ag or wap55ag ..

Maybe you are looking for

  • Error when using replacement path variable in exception range

    I'm trying produce a check report that produces exception highlighting based on a range determined by the associated characteristic. eg. For Check 1, highlight cells in red where the associated key figure is between 1 and 999. For Check 2, highlight

  • Can no longer connect my MBP to a local file server

    I can no longer connect to a particular computer on my local network from my MBP(Mid 2010 running 10.6.6). I am trying to connect to a Mac G4 tower running 10.4.11. This has worked in the past but now does not. An older MBP(Mid 2007 running 10.6.6) h

  • Re: How I would make the Toshiba AC100 successful

    Hi All, I post my ideas for improvements here, maybe someone from Toshiba reads this. The original blog post is here: http://soltesza.wordpress.com/2011/05/09/how-i-would-make-the-toshiba-ac100-successful/ Please feel free to contribute here or at th

  • HELP!! iPod got frozen in HOLD !!!

    Please somebody help me! i got a 2GB ipod nano, last day i switch it in HOLD mode but suddenly it got frozen, so now i can't reset it cause of the hold (even when the hold button is off), i've tried charging it, and it holds the charge, how can i res

  • Visited sites by other computer connected to my WRT54G2

    hi...im new in using this WIFI of mine...WRT54G2..i can see only the IP ADDRESS visited sites by other computers connected to my wifi. is there a way to see the exact websites they were viewing?? or a software perhaps?? tnx