Re: weird behaviour xml query

From the XML DB FAQ (#5 in the announcement list)
How to I use namespaces with XMLQuery() ?
How do I declare namespace prefix mapping with XMLTable() ?
Your XML has a default namespace associated with it, so you will need to supply the default namespace to XMLTable/XQuery as well.  Also the XPaths in the COLUMNS clause are relative to the XPath for the XMLTable itself, so I adjusted that as well. The below returns rows, but I did not verify it is what you desired.  This should give you a start at least.
select a.*, b.*
   from cas_nummers,  -- changed
        xmltable
                 XMLNamespaces(default 'http://echa.europa.eu/schemas/ecInventory'),  -- added
                 '/ECSubstanceInventory/ecSubstances/ECSubstance'
                 passing cas_nummers.object_value  -- changed
                 columns
                 creationDate varchar2(30) path '@creationDate',
                 status varchar2(20) path '@status',
                 ecnumber  varchar2(20) path 'ecNumber',  -- changed
                 casnumber varchar2(20) path 'casNumber',  -- changed
                 molecularFormula varchar2(20) path 'molecularFormula',  -- changed
                 namelist xmltype path 'ecNames'  -- changed
        ) a,
        xmltable
                 XMLNamespaces(default 'http://echa.europa.eu/schemas/ecInventory'),  -- added
                 'ecNames'  -- changed
                 passing a.namelist
                 columns
                 ecName      varchar2(5) path '.'  -- changed
        ) b

I have replace the file test1.xml with a file of about 28MB with about 100000 records(say casNumbers)
I have created a table with the columns
casnumber,ecnumber, molecularformula, cname, status,creationdate
I use the following plsql anohymous block
declare
cursor c0
is
select to_date(substr(a.creationdate,1,10),'yyyy-mm-dd') as creationdate
     , decode(a.status,'active',1,0) as status
     , a.ecnumber
     , a.casnumber
     , a.molecularformula
     , b.ecName
   from cas_nummers,
        xmltable 
                 XMLNamespaces(default 'http://echa.europa.eu/schemas/ecInventory'),
                 '/ECSubstanceInventory/ecSubstances/ECSubstance' 
                 passing cas_nummers.object_value 
                 columns 
                 creationDate varchar2(30) path '@creationDate', 
                 status varchar2(20) path '@status', 
                 ecnumber  varchar2(20) path 'ecNumber', 
                 casnumber varchar2(20) path 'casNumber', 
                 molecularFormula varchar2(20) path 'molecularFormula', 
                 namelist xmltype path 'ecNames' 
        ) a, 
        xmltable 
                 XMLNamespaces(default 'http://echa.europa.eu/schemas/ecInventory'),  -- added 
                 'ecNames'  -- changed 
                 passing a.namelist 
                 columns 
                 ecname      varchar2(50) path '.'  -- changed 
        ) b
v_errm varchar2(200);
i pls_integer;
begin
   for r_casnr in c0 loop
   begin
      insert into csa_cas_nummers
      ( casnummer_id
      , cas_nummer
      , ec_nummer 
      , stofnaam
      , moleculair_formule
      , dd_creatie
      , status  
      , volgnr
      values
      (csa_cas_nummers_seq.nextval
      ,r_casnr.casnumber
      ,r_casnr.ecnumber
      , trim(r_casnr.stofnaam)
      , r_casnr.molecularformula
      , r_casnr.creationdate
      , r_casnr.status  
      , 0
    if mod(i,1000) = 0 then
       commit;
    end if;
    exception
       when others then
          v_errm :=substr(sqlerrm,1,200);
          insert into foute_casnrs
          values
          (r_casnr.casnumber, v_errm);
          dbms_output.put_line( r_casnr.casnumber||' -> '||sqlerrm);       
   end;
   end loop;
end;
The strange thing is that it stops without error at +/- 38000 records (when i do select count(1) from cas_nummers and no records in the table foute_casnrs)
I have check some cas_nummers which is in the xml file but not in the tcas_nummers table....
Any idea what is wrong with my code?
Thanks in advance,
Henk

Similar Messages

  • HTML Link -AS2 fine, AS3 weird behaviour

    Hi Guys, I'm working on a project at the moment, and am
    seeing weird behaviour with the way my swf handles html links
    inside dynamic textboxes. When rendered as a AS2 file, the link
    works on a release as expected. When its inside a AS3 file the link
    will only work if the user right click and chooses 'open in new
    window' was there a change in behaviour how AS3 handles these
    links, or is there now an declaration needed to be made to allow
    these link to have the old behaviour?
    The project calls for xml data and embedded in that is a html
    link. Originally I thought it might have been the way I'd formed
    the xml so I tried with a hardcoded version instead (dynamic
    textbox, add text -> highlight -> add link through properties
    tab). But I still see the same behaviour between the as2 and as3
    versions.
    Any help would be greatly appreciated.
    Cheers.

    Actually, the ''href'' attribute is supposed to direct the browser to a new URL, etc., not run a script. Instead, use the ''onclick'' event attribute:
    ''<a onclick = “$('.div-feedback').fadeIn();”></a>''.
    Happy coding!

  • Problem in xml query

    Hi
    I am working on BLS and having problem in xml query.I want to perform some calculation over xml columns.Than total of this as a new column.I can do this part in logic editor itself but can i do these both task by XSLT.
    Can be made our own XSLT for this ?
    I am feeling kind of fear to xslt. Can anybody help me in this.
    Thanks a lot in advance
    thomas

    Ram,
    In xMII there is a list of predefined xslt transforms that do something similar to what you are explaining.  The 3 that I think may be what you are looking for are
    they are under Calculation Transformations and Subtotal Transformation take a look at these and tell me if they are doing what you want to accomplish.  In the xMII help file do a search on Inline Transforms or navigate to Advanced Topics -> Inline Transforms -> Predefined Inline Transforms.  In this section there are examples of how to use these transforms and apply them in the query templates.  If this is not what you are looking for can you explain in a little more detail along with a simple example of how you want this transform to work.  Also why do you want to use xslt if you can already accomplish this in BLS?
    Regards,
    Erik

  • Error and weird behaviour in executable launch

    Hello folks,
    This post is regarding a weird behaviour i am experiencing with an executable i built. 
    LABVIEW version(Includes Runtime engine) LV2012 SP1 f3
    DAQmx: 9.6.1
    The behaviour is listed below in detail. 
    In a nutshell, the exectuable runs on the development computer but does not run on the Target computer. Also, Irresepctive of which PC i run the executable on, i cannot access the block diagram even after enabling debugging everywhere. 
    On the target PC, the app fires up but does not run further, no error codes appear on the screen, it's like the app freezes after firing up. And to add to the misery, i cannot access the block diagram to debug and know what's going on. 
    Also, I have tried including the dynamic vis to my build script. No bueno. 
    What I see on running the app is addressed below:
    TARGET COMPUTER:
    DAQmx 9.7 and LV2012 SP1 f4 RTE have been installed manually.
    App does not run: No broken run button, the app launches but does nothing when the vi is run. No error messages.
    The block diagram is still inaccessible, even after selecting the “Enable debugging” option in the build specifications.
    DEVELOPMENT COMPUTER:
    The app launches and runs perfectly.
    The block diagram is still inaccessible, even after selecting the “Enable debugging” option in the build specifications.
    DAQmx 9.7 and LV2012 SP1 f4 RTE were not installed as the app recognized the already installed Labview environment.
    Additional steps that I have tried,
     Created and ran only an executable on the target PC, the attempt was unsuccessful. The vi showed similar characteristics as mentioned above in the target PC section.
     Created and ran an installer with additional install options(LV2012 f4 RTE and DAQmx 9.7)on the target PC, the attempt was again unsuccessful. The vi showed similar characteristics as mentioned above in the target PC section.  No error messages.
     Tried both the steps mentioned above on the development computer and the attempts were successful. .
    To the best of my knowledge, I believe, the issue here is with the environment I am creating for the executable and the installer to run with/off of. After having carefully followed the installation procedure for the Run-Time Engine and the DAQmx drivers, I still do not know what I am missing. 
    Please advise.
    Thanks guys, 
    RP.

    Hey guys, 
    So, got the application to work. Almost. 
    The problem was that the executable was missing the hardware config from the Device. 
    Now, the new issue is as following: 
    The goal of the vi is to generate a report of the test conducted. So, the way the vi works is that, the second the vi is run, an empty word file is created with only the company logo,  
    Field headings, which are populated after the test is conducted. 
    The logo is a .jpg file, which has a relative path into the executable.
    The field heading are String constants wired into a 'concatenate strings.vi' which are in turn wired to into the report generation vis.
    What's happening is that when i run the app on the target pc, Only the logo appears on the word template. Even when i conduct the whole test and stop the vi, the results aren't populated in the word file. Which is a little weird.
    Does any one know whats doing that?
    Please refer to the attached word files.
    Right - It is the file format desired. 
    Wrong - It is the file format achieved. 
    Please advise.
    Thanks,
    RP. 
    Attachments:
    Right.docx ‏17 KB
    Wrong.docx ‏16 KB

  • [Solved] Firefox 3 betas give me some weird behaviour with images

    I understand that there will be problems with beta software, however I seem to have memory issues with the firefox 2 series, so I thought I'd give the beta packages a try. I'm using the firefox-nightly package from AUR (firefox3b4), and I'm getting some weird behaviour. The same behaviour can be seen in all firefox 3 beta builds, however. It's hard to explain the problem, so here's a screenshot:
    Notice that the image appears twice, once in the tab, and once in the tab toolbar next to the title of the tab. It looks like an attempted preview gone terribly wrong. Upon closing the tab, the tab toolbar shrinks down to the normal size and all is well. This happens with most images up to a certain size. Any one else experiencing this problem? Any suggestions? This is very annoying and I would like anyone's input on the problem.
    Last edited by valnour (2008-02-24 07:41:05)

    Wow! This issue was solved in #archlinux by Nuked. Apparently I had some funky bits in my .mozilla directory. Removing it solved the problem. Remember kids, IRC is your friend. Anyone else experiencing weird stuff with their Firefox install should give this solution a try.

  • Converting Oracle XML Query Result in Java String by using XSU

    Hi,
    I have a problem by converting Oracle XML Query Result in Java
    String by using XSU. I use XSU for Java.
    For example:
    String datum=new OracleXMLQuery(conn,"Select max(ps.datum) from
    preise ps where match='"+args[0]+"'");
    String datum1=datum;
    I become the following error:
    Prototyp.java:47: Incompatible type for declaration. Can't
    convert oracle.xml.sql.query.OracleXMLQuery to java.lang.String.
    Can somebody tell me a method() for converting to solve my
    problem??????
    Thanks

    Hmmm.. Pretty basic just look at the example:
    OracleXMLQuery qry = new OracleXMLQuery(conn,"Select max(ps.datum) from preise ps where match='"+args[0]+"'");
    String xmlString = qry.getXMLString();
    Hi,
    I have a problem by converting Oracle XML Query Result in Java
    String by using XSU. I use XSU for Java.
    For example:
    String datum=new OracleXMLQuery(conn,"Select max(ps.datum) from
    preise ps where match='"+args[0]+"'");
    String datum1=datum;
    I become the following error:
    Prototyp.java:47: Incompatible type for declaration. Can't
    convert oracle.xml.sql.query.OracleXMLQuery to java.lang.String.
    Can somebody tell me a method() for converting to solve my
    problem??????
    Thanks

  • How to tune the performance of Oracle SQL/XML query?

    Hi all,
    I am running Oracle 9i and like to run the following Oracle SQL/XML query. It takes about 3+ hour and still not finish. If I get rid all the XML stuffs it only take minutes to run. Does anybody know how to what's the reason of this slow and how to tune it?
    SELECT XMLElement("CUSTOMER",
    XMLForest(C_CUSTKEY "C_CUSTKEY", C_NAME "C_NAME", C_ADDRESS "C_ADDRESS", C_PHONE "C_PHONE", C_MKTSEGMENT "C_MKTSEGMENT", C_COMMENT "C_COMMENT"),
    (SELECT XMLAgg(XMLElement("ORDERS",
    XMLForest(O_ORDERKEY "O_ORDERKEY", O_CUSTKEY "O_CUSTKEY", O_ORDERSTATUS "O_ORDERSTATUS", O_ORDERPRIORITY "O_ORDERPRIORITY", O_CLERK "O_CLERK", O_COMMENT "O_COMMENT"),
    (SELECT XMLAgg(XMLElement("LINEITEM",
    XMLForest(L_ORDERKEY "L_ORDERKEY", L_RETURNFLAG "L_RETURNFLAG", L_LINESTATUS "L_LINESTATUS", L_SHIPINSTRUCT "L_SHIPINSTRUCT", L_SHIPMODE "L_SHIPMODE", L_COMMENT "L_COMMENT")
    FROM LINEITEM
    WHERE LINEITEM.L_ORDERKEY = ORDERS.O_ORDERKEY)
    FROM ORDERS
    WHERE ORDERS.O_CUSTKEY = CUSTOMER.C_CUSTKEY)
    FROM CUSTOMER ;
    Thanks very much in advance for your time,
    Jinghao Liu

    ajallen wrote:
    Why not something more like
    SELECT *
    FROM fact1 l,
    FULL OUTER JOIN fact1 d
    ON l.company = d.company
    AND l.transactiontypeid = 1
    AND d.transactiontypeid = 2;
    Because this is not an equivalent of the original query.
    drop table t1 cascade constraints purge;
    drop table t2 cascade constraints purge;
    create table t1 as select rownum t1_id from dual connect by level <= 5;
    create table t2 as select rownum+2 t2_id from dual connect by level <= 5;
    select * from (select * from t1 where t1_id > 2) t1 full outer join t2 on (t1_id = t2_id);
    select * from t1 full outer join t2 on (t1_id = t2_id and t1_id > 2);
         T1_ID      T2_ID
             3          3
             4          4
             5          5
                        6
                        7
         T1_ID      T2_ID
             1
             2
             3          3
             4          4
             5          5
                        6
                        7

  • How to perf tune Oracle SQL/XML query?

    Hi all,
    I am using Oracle 9i and like to run the following Oracle SQL/XML query. It takes about 3+ hour and still not finish. If I get rid all the XML stuffs it only take minutes to run. Does anybody know how to what's the reason of this slow and how to tune it?
    SELECT XMLElement("CUSTOMER",
    XMLForest(C_CUSTKEY "C_CUSTKEY", C_NAME "C_NAME", C_ADDRESS "C_ADDRESS", C_PHONE "C_PHONE", C_MKTSEGMENT "C_MKTSEGMENT", C_COMMENT "C_COMMENT"),
    (SELECT XMLAgg(XMLElement("ORDERS",
    XMLForest(O_ORDERKEY "O_ORDERKEY", O_CUSTKEY "O_CUSTKEY", O_ORDERSTATUS "O_ORDERSTATUS", O_ORDERPRIORITY "O_ORDERPRIORITY", O_CLERK "O_CLERK", O_COMMENT "O_COMMENT"),
    (SELECT XMLAgg(XMLElement("LINEITEM",
    XMLForest(L_ORDERKEY "L_ORDERKEY", L_RETURNFLAG "L_RETURNFLAG", L_LINESTATUS "L_LINESTATUS", L_SHIPINSTRUCT "L_SHIPINSTRUCT", L_SHIPMODE "L_SHIPMODE", L_COMMENT "L_COMMENT")
    FROM LINEITEM
    WHERE LINEITEM.L_ORDERKEY = ORDERS.O_ORDERKEY)
    FROM ORDERS
    WHERE ORDERS.O_CUSTKEY = CUSTOMER.C_CUSTKEY)
    FROM CUSTOMER ;
    Thanks very much in advance for your time,
    Jinghao Liu

    Please post this message at:
    Forums Home » Oracle Technology Network (OTN) » Products » Database » XML DB

  • Help Needed XML query

    I have troubles with my XML query. It returns to many results and double results.
    My code
    select xmlelement("test", XMLAgg(xmlelement("Customer", XmlAttributes(a.CUSTOMER_ID "cid"))),
    XMLAgg(xmlelement("Account", xmlagg(xmlelement("Account", b.ACCOUNT_ID) ))),
    XMLAgg(xmlelement("ServicePoint", xmlagg(xmlelement("sp", c.SPID) ))) ).extract('*').getstringval() xml
    From DM_SERVICE_POINT c, DM_CUSTOMER a, DM_ACCOUNT b where a.CUSTOMER_ID = b.CUSTOMER_ID And a.CUSTOMER_ID=c.CUSTOMER_ID AND a.CUSTOMER_ID='15058'
    group by a.CUSTOMER_ID
    i have 1 customer id in the table dm_customer, 2 account_id 's that are linked to customer_id with a FK. DM_Servicepoint contains 6 rows that are linked to dm_customer with a FK.
    My result is 1 result for customer, thats correct but account shows 12 results, where i expect 2 results
    and Service point shows also 12 records where i expect 6 records.
    There is no direct link between account and service point but both are linked to customer. Each customer can have 1 or 2 account And each customer can have 1 or many servicepoints.
    Can you help me?
    Message was edited by:
    Marinda

    Now to see whether we can get this to work with XML....Turns out it's a lot easier than I thought it would be:
    SQL> select dbms_xmlgen.getxml('select c.name
      2         , cursor(select a.acctno, a.name
      3                  from my_accounts a
      4                  where a.cust_id = c.id ) as accounts
      5         , cursor(select s.sp_ref
      6                  from my_service_points s
      7                  where s.cust_id = c.id ) as srv_points
      8  from   my_customers c
      9  ') from dual
    10  /
    DBMS_XMLGEN.GETXML('SELECTC.NAME,CURSOR(SELECTA.ACCTNO,A.NAMEFROMMY_ACCOUNTSAWHE
    <?xml version="1.0"?>
    <ROWSET>
    <ROW>
      <NAME>APC</NAME>
      <ACCOUNTS>
       <ACCOUNTS_ROW>
        <ACCTNO>900000</ACCTNO>
        <NAME>No1 a/c</NAME>
       </ACCOUNTS_ROW>
       <ACCOUNTS_ROW>
        <ACCTNO>900002</ACCTNO>
        <NAME>Business</NAME>
       </ACCOUNTS_ROW>
      </ACCOUNTS>
      <SRV_POINTS>
       <SRV_POINTS_ROW>
        <SP_REF>SP1</SP_REF>
       </SRV_POINTS_ROW>
       <SRV_POINTS_ROW>
        <SP_REF>SP2</SP_REF>
       </SRV_POINTS_ROW>
       <SRV_POINTS_ROW>
        <SP_REF>SP3</SP_REF>
       </SRV_POINTS_ROW>
       <SRV_POINTS_ROW>
        <SP_REF>SP4</SP_REF>
       </SRV_POINTS_ROW>
       <SRV_POINTS_ROW>
        <SP_REF>SP5</SP_REF>
       </SRV_POINTS_ROW>
       <SRV_POINTS_ROW>
        <SP_REF>SP6</SP_REF>
       </SRV_POINTS_ROW>
      </SRV_POINTS>
    </ROW>
    <ROW>
      <NAME>MARINDA</NAME>
      <ACCOUNTS>
       <ACCOUNTS_ROW>
        <ACCTNO>900004</ACCTNO>
        <NAME>Checking</NAME>
       </ACCOUNTS_ROW>
      </ACCOUNTS>
      <SRV_POINTS>
       <SRV_POINTS_ROW>
        <SP_REF>SP7</SP_REF>
       </SRV_POINTS_ROW>
       <SRV_POINTS_ROW>
        <SP_REF>SP8</SP_REF>
       </SRV_POINTS_ROW>
      </SRV_POINTS>
    </ROW>
    </ROWSET>
    SQL> Obviously you'll need to do some smartening up of the tag names.
    Cheers, APC
    Blog : http://radiofreetooting.blogspot.com/

  • XML query structure problem

    Hi experts,
    I am looking for help on the following XML query. I have a table (example) organized as such:
    meas     data_element     
    ABC     rate                  
    DEF     rate1                   
    DEF     rate2                   
    DEF     rate3                   
    GHI     rate                   
    JKL     rate1a           
    JKL     rate2b             I'm trying to keep the "meas" column as the top node attribute, with the "data_elements" as attributes of the children of "meas"
    In short, I'm looking for the following output, but, well..keep coming up short.
    <meas id="ABC">
         <data_elements>
            <data_element id="rate">
                <rpt>false</rpt>
             </data_element>
        </data_elements>
    </meas>
    <meas id="DEF">
         <data_elements>
              <data_element id="rate1">
                   <rpt>false</rpt>
              </data_element>
                     <data_element id="rate2">
                   <rpt>false</rpt>
              </data_element>
              <data_element id="rate3">
                      <rpt>false</rpt>
              </data_element>
         <data_elements>
    </meas>
    .....and so forth...I'm having trouble with getting the multiple rows of 'data_element' under 'data_elements', and under the single 'meas' one node, any suggestions? My code keeps generating multiple rows. The rpt node is a constant value of 'false'
    Thanks

    You have to group, and aggregate using XMLAgg :
    SQL> set long 5000
    SQL>
    SQL> with sample_data (meas, data_element) as (
      2    select 'ABC',     'rate'   from dual union all
      3    select 'DEF',     'rate1'      from dual union all
      4    select 'DEF',     'rate2'  from dual union all
      5    select 'DEF',     'rate3'  from dual union all
      6    select 'GHI',     'rate'   from dual union all
      7    select 'JKL',     'rate1a' from dual union all
      8    select 'JKL',     'rate2b' from dual
      9  )
    10  select xmlserialize(content
    11           xmlagg(
    12             xmlelement("meas",
    13               xmlattributes(meas as "id")
    14             , xmlelement("data_elements",
    15                 xmlagg(
    16                   xmlelement("data_element",
    17                     xmlattributes(data_element as "id")
    18                   , xmlelement("rpt", 'false')
    19                   )
    20                   order by data_element -- if necessary
    21                 )
    22               )
    23             )
    24           )
    25           indent
    26         ) as result
    27  from sample_data
    28  group by meas ;
    RESULT
    <meas id="ABC">
      <data_elements>
        <data_element id="rate">
          <rpt>false</rpt>
        </data_element>
      </data_elements>
    </meas>
    <meas id="DEF">
      <data_elements>
        <data_element id="rate1">
          <rpt>false</rpt>
        </data_element>
        <data_element id="rate2">
          <rpt>false</rpt>
        </data_element>
        <data_element id="rate3">
          <rpt>false</rpt>
        </data_element>
      </data_elements>
    </meas>
    <meas id="GHI">
      <data_elements>
        <data_element id="rate">
          <rpt>false</rpt>
        </data_element>
      </data_elements>
    </meas>
    <meas id="JKL">
      <data_elements>
        <data_element id="rate1a">
          <rpt>false</rpt>
        </data_element>
        <data_element id="rate2b">
          <rpt>false</rpt>
        </data_element>
      </data_elements>
    </meas>

  • Xcelsius with XMLA or XML Query Result Set

    Hi Experts,
    I want a direct connection from Xcelsius to my BW-Data. Because the new connection, coming with Fix Pack 2.1 is only avaiable for EHP 1 for NW 7.0 I tried to configure with XMLA and XML Query Result Set.
    This Document tells the necessary steps: How to integrate Xcelsius 2008 with SAP NetWeaver BI without Integration Kit.pdf.
    When I test my XML connection over http://<host>:<port>/TXmla/srvlet/TestXmla my Cubes will display.
    So I do a Webservice-Connection with WSDL-URL. At Input-Values there are some entries like CUBE_NAME, CATALOG_NAME...
    Output values arent avalible. How do I use these elements to show my Data in Xcelsius?
    My Problem with the XML Query Result Set Connection is, that when I Log On to VC the following error appears:
    You are not authorized to view the requested resource.
    So I get the authorisationobjects: S_DEVELOP and S_RS_COMP as describe in 'How To... Resolve Visual Composer Issues'.
    What values have I to enter by S_RS_COMP? And how can I enter my External Service in S_SERVICE. At the type WS the service isnt't avaiable.
    Regards,
    Jan

    To use XMLA web service you need a wrapper function build to convert the XMLA output to the Xcelsius format. There are some documents available in SDN on how to do this.
    You can use Live Office or Query as a Web service option to connect from Xcelsius to BW.
    S_RS_COMP is the query ID which you are trying to access, S_SERVICE you can either give * or try to set up authorization log and see the expected value.

  • Error in testing XML query result set web service

    Hi
    I was trying to test a <b>XML query result set web service</b> in BW system with tcode wsadmin but getting error like
    <b>Cannot download WSDL from http://ibmbtsb02.megacenter.de.ibm.com:8070/sap/bw/xml/soap/queyview?sap-client=001&wsdl=1.1&mode=sap_wsdl: F:\usr\sap\W70\DVEBMGS70\j2ee\cluster\server0\apps\sap.com\com.sap.engine.services.webservices.tool\servlet_jsp\wsnavigator\root\WEB-INF\temp\ws1139464945296\wsdls\wsdlroot.wsdl (The system cannot find the path specified)</b>
    I had tried it first time few days ago and was able to test it successfully with the same configuration settings.
    Could any one of you please provide any suggestion on this?
    Thanks in advance
    Sudip

    hi
    check this links it may help u.
    http://help.sap.com/saphelp_nw04/helpdata/en/c3/e3072e65f04445a010847aa970b68b/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/d8/3bfc3f8fc2c542e10000000a1550b0/frameset.htm
    Regards,
    Manoseelan

  • No method found for XML query element

    Hi,
    I have an EJB module which contains some entity beans.
    If I try to deploy it or verify it using the Sun One Verifier Tool I get the following exception...
    Error: ** Error trying to process file: java.lang.RuntimeException: No method found for XML query element: Ambiguous or invalid <query-method>
    java.lang.RuntimeException: No method found for XML query element: Ambiguous or invalid <query-method>
    at com.sun.enterprise.deployment.xml.EjbNode.parseQueries(EjbNode.java:700)
    at com.sun.enterprise.deployment.xml.EjbNode.completeLoadingDescriptor(EjbNode.java:671)
    at com.sun.enterprise.deployment.xml.EjbBundleNode.completeLoadingDescriptor(EjbBundleNode.java:524)
    at com.iplanet.ias.deployment.EjbBundleXmlReader.load(EjbBundleXmlReader.java:249)
    at com.iplanet.ias.deployment.EjbBundleXmlReader.loadStdAloneModule(EjbBundleXmlReader.java:162)
    at com.sun.enterprise.tools.verifier.Verifier.openEjbJar(Verifier.java:2421)
    at com.sun.enterprise.tools.verifier.Verifier.loadEjbJar(Verifier.java:1318)
    at com.sun.enterprise.tools.verifier.Verifier.loadJar(Verifier.java:866)
    at com.sun.enterprise.tools.verifier.gui.MainPanel.run(MainPanel.java:187)
    at java.lang.Thread.run(Thread.java:536)
    Look in file "EntityBeans.jar_verified.xml" for detailed results on test assertions.
    This problem can be resolved by un-installing the IDE, removing my user directory, and re-installing the IDE (I am using SunOne Studio 5 SE Update 1). The problem is that it returns with alarming regularity.
    Anyone else experiencing this? Any help would be much appreciated.

    Sometimes, but not always, this exception appears in the ide.log before the error first occurs.
    com.sun.forte4j.j2ee.packaging.PackagingIOException: package/EntityBeans.ejbjar
         at com.sun.forte4j.j2ee.packaging.PackagingUtil.writeJarFile(PackagingUtil.java:403)
         at com.sun.forte4j.j2ee.packaging.PackagingUtil.writeJarFile(PackagingUtil.java:67)
         at com.sun.forte4j.j2ee.ejbmodule.EJBModuleDataObject.writeEJBJar(EJBModuleDataObject.java:2673)
         at com.iplanet.ias.tools.forte.verifier.VerifierAction.performAction(VerifierAction.java:63)
         at org.openide.util.actions.NodeAction$DelegateAction.actionPerformed(NodeAction.java:431)
         at org.netbeans.core.ModuleActions$1.run(ModuleActions.java:97)
         at org.openide.util.Task.run(Task.java:136)
         at org.openide.util.RequestProcessor$Task.run(RequestProcessor.java:328)
         at org.openide.util.RequestProcessor$Processor.run(RequestProcessor.java:670)

  • Import xml query

    hi gurus...
    what i m trying to 2 is to import a xml (query exported from production system) into test system, but this message is shown :
    bold
    Manually start the maintenance transaction for objects of type CWM Document
    bold
    has someone what the transaction is? and what does it mean?
    regards
    joker

    Hi Joker,
    Did you resolve the issue. "Manually start the maintenance transaction for objects of type CWM Document"
    If you have resolved this issue can you please let me know.
    Regards,
    Anil

  • Use of Global Properties in URL path of XML Query

    I am trying to use global properties to define the URL of XML query:
    Globals.ImageFilePath&"SomePath/\File.xml"
    but it does not like it. If I put the content of the Globals.ImageFilePath it works fine. What is the synatax for that?
    I am using the XML query in a transaction within an image creation action block. When I try to define the URL parameter of the XML file as a link, it is not taken on account, and the image created has no data (it is empty). The URL is taken when defined on the Cofigure Object screen, but there I have the same problem to use the global variable parameter.
    Any suggestions?
    Thanks,
    Vlad
    Edited by: Vladimir Baltchev on Jul 29, 2008 11:33 PM
    Edited by: Vladimir Baltchev on Jul 29, 2008 11:40 PM

    As I mentioned in my first posting, yes, I can put the global variable of the link editor for the URL parameter, it evaluates well, but it is not taken on account by the query, and the image generated is empty. Obviously there is a bug here, so I am trying to find a work around to use the global variable on the Configure Object screen, where the parameter URL is taken by the XML query, but on this screen I can not use the global variable. It works only if I put the content of the global variable.
    So, does anybody know if we can use global variables on a Configure Object  screen, or on the XML query URL field, and if so, what is the syntax to indicate global variable?
    Thanks again,
    Vlad

Maybe you are looking for

  • I have an iPod 2nd Generation and it won't show up in iTunes

    So I got a new laptop and I wante to transfer my music from my iPod onto it, so I plugged it in the new laptop.  I accidentally clicked that it was okay for all of my music to be erased, which is not what I wanted to do. Anyway, so I figured that I c

  • GUI_UPLOAD and OS

    hi all       i am using the function module GUI_UPLOAD in my code , i want to know as this FM takes file from presentation server and uploads  it to application server, so on presentation server is thr any relation between OS or any files from OS are

  • Transfering from G5 to Intel iMac

    Hi everyone. My first post here. I have a 20" G5 based iMac I have been using for a bit. I am about to upgrade to 24" Intel iMac. Since I started using OS X, transferring data from one to another has been simple, just attach a firewire cable and good

  • Plug-in errors in Illustrator CS5 for Mac

    I recently installed the Design Premium version of CS5 on my work computer. Everything was going fine in Illustrator until today, when I tried to add some older brushes, patterns, symbols to the presets folder. Now Illustrator is loading with tons of

  • IWeb...error report, files missing??

    I'm not sure what's going on...I deleted one of my websites and all of the sudden I began having trouble with all my websites.  I have pictures, links to files, and other things missing.  Apparently iWeb can't find them. I did replace iWeb using Time