RE: what is the login for author?

I can't seem to login to author using admin/admin.  What is the default login now?

To login to Author, please use the Username 'admin' and the Password you entered on the Add cloud dialog.

Similar Messages

  • What is the Tcodes for Uploading of data using BDC & CATT

    PP members:
    I was going through the <b>cutover activities</b> ,  and what I understood is  we transfer all the legacy system data into SAP before going live
    The data upload follows certain steps (depends on the organizational design load strategies)
    First we upload all the master data ( material master, BOM, W/C's & Routings)
    Then the transaction data ( Ideally speaking, there should no open orders i.e. WIP as on the day of cutoff )
    If the WIP (Work in Process) is unavoidable then the materials consumed shall be treated as <b>materials of the previous stage</b> and necessary adjustments shall be made after cutover day
    At this point, I could not able to understand what does the author mean <b>materials of the previous stage</b>
    Now comming to the uploading of data into SAP from legacy system, we use tools like LSMW, CATT & BDC
    Is it a must to use <b>only LSMW tool</b> to upload master data or any other upload tools are fine
    Lastly,. I am not sure about the Tcode of CATT & BDC
    Summary of the questions:
    1.What does the author mean  <b>material of previous stage</b>, for WIP materials during cutover activities
    2. Is it mandatory to use only LSMW tool for uploading for master data
    3. What are the Tcodes for upload tools CATT & BDC ?
    Thanks for your time
    Suren R

    Dear,
    1.What does the author mean material of previous stage, for WIP materials during cutover activities - as i understood, what is the stage of material..like it must have gone through 2 work centers and other 2 is left. i.e. you need to create Production order with only 2 operation as other 2 is already over. - usually it is done in such a way that we will create Production order and confirm till 2 operations and WIp is calculated so thatb FI will tally the books in SAP and lagacy.
    2. Is it mandatory to use only LSMW tool for uploading for master data - no you can use any tool as required and suits yr requirement
    3. What are the Tcodes for upload tools CATT & BDC- BDC through a prog in SE38. CATT through - SCEM.

  • What are the announcements for renting VPS?

    What are the announcements for renting VPS? For details, understand VPS and make the choice of rental; for Taiwan VPS and Hong Kong VPS, without records, unlimited contents, wider range, and more efficient experience. Your server will show its excellence with the advantages.
    Most station agents become less inclined to virtual hosting, for national space, domain name records are needed, which waste the time; for overseas hosting such as Korea hosting, US hosting, no records, but slower speed than national space; therefore, more and more station agents prefer servers, but because the price of servers are too high, they turn their focus on VPS.
    The following are the announcements:
    1.Open remote desktop lander:
    Start-run-mstsc or start-procedure-nearby-remote desktop connect
    2.Several conditions for account halt:
    First, client side login cause account halt
    Second, certain account quits the remote control in midway when it runs routine
    Third, certain routine is restricted by synchronous operation of system administrator.
    3. Not install the third party firewall
    If you need firewall, please use windows firewall, the third party firewall in VPS will cause system collapse and data loss, the system automatically obtains the newest windows patches and install itself, which do not require human operation. Installing system patches in VPS sometimes will heavily lead to VPS collapse and data loss.
    Do not modify remote desktop port.
    Because of the specialty of VPS system, default remote desktop port is 3389, do not modify randomly, or the remote connection will be out of work.
    4. Except some special conditions that user registration is needed for certain procedure, when the remote connection has been close down, do not forget logout user to save memory resource, and prevent the loading connection next time, if it happens, reboot VPS.
    5. VPS has been set with relative security when it was paid, with high security. It suggests that do not open firewall randomly, if you open it by your own, the following ports should be opened: 21(FTP), 3389(remote connection), 80(website http), 3306(MySQL), 1433(SQL Server). Timely check whether there is suspicious account or system log, download 360 safety guard to avoid these files and process.
    6. Try not to modify registry hand-actuated, ensure the reboot of VPS. Modify remote ports please add the modified port in firewall first, and then reboot.
    7.Modify IIS installation files, backup these files, and then modify them with the software that can keep the file layout, prevent these files from destroying IIS.
    8.Website service of VPS and FTP service of IIS are default to open hand-actuated, set Web Publishing Service as automatically if you are station agent. If you often use FTP service of IIS, please set FTP Publishing Service as automatically, i.e. reboot it automatically. If you use serv-u, tick all the system service terms. In the terms of security and resource consumption , it suggests that those users who seldom use FTP do not set it as automatically.

    Hi there
    "So for ALL the apps, the annual monthly fee is £46.88, but you can rent occasionally for £70.32 pm.... ?" Correct
    £17.58 single app plan requires an annual commit - it's £27.34 for the month-to-month plan without annual commit.
    Thanks
    Bev

  • What is the rule for adding application elements to faces-config.xml

    I have posed this question before, but was unable to get an answer so here goes again.
    What is the rule for adding more than one application element to the faces-config.xml?
    The schema documents that 1-n are possible, but why and when should I do this?
    --W                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

    sorry if you don't login in tomcat administration before. you must enter login and password of a manager user on tomcat .
    The user is the one you give when installing tomcat.
    If you have forgotten it : see it to: C:\Program Files\Apache Software Foundation\Tomcat 6.0\conf\tomcat_users.xml
    and choose one whop have role='manager'

  • Re: (forte-users) Ok, what's the "secret" for setting serverside envi

    Dear Robinson,
    It seems to be that you have 2 ways of solving the problem:
    1) restart forte after setting the environment variables
    2) write a little application which sets the required variables, using
    the task.part.OperatingSystem.SetEnv(name,value) method.
    If you have to chage the variables rarely, then it`s easier to restart forte,
    otherwise I would suggest to use the SetEnv function...
    Best Regards,
    Tamas Deak
    "Robinson, Richard" wrote:
    Subject says it all.
    We have a bunch of environment variables that are used by the server side
    objects. What I want to do is change the value of some of the variables
    prior to running my application in Forte Development IDE (3.0.G.2). I've
    tried to set the environment variables via NT's registry, but it appears
    that at execution time the variables take on the value of whatever they are
    for the node manager.
    Most IDE's I've worked with before have a way to specify environment
    variables right in the tool. Forte doesn't appear to have that capability -
    say it ain't so!
    Any clues?
    For the archives, go to: http://lists.sageit.com/forte-users and use
    the login: forte and the password: archive. To unsubscribe, send in a new
    email the word: 'Unsubscribe' to: [email protected]
    Tamas Deak
    Lufthansa Systems Hungary
    (forte developer)
    2-6 Mazsa ter, Budapest, 1107, HUNGARY
    (36-1) 4312 973
    [email protected]
    [email protected][email protected]-

    Richard,
    There is no way of changing the environment variable once the Node
    Manager is up. You will have to shutdown the node manager and then restart
    it to have the new environment variables take effect. Sorry, there is no
    secret way of doing this that I know of.
    But you can set the variables on you development machine and run you
    application without distributing. This way the partition will be running in
    your client machine and not the server.
    Another way we have also got around this is by having a special
    environment variable on the client side that opens a admin screen when you
    run you application. This admin screen will allow you to change the
    environment variables and then set them on the server partition. You will
    have to do come coding on the server to make this happen but if you are
    using a framework then it should be easy. We call this developer reconnect
    facility. It only can be activated by the special client side environment
    variable. I comes in very handy when we are development and want to change
    the database on the server partition.
    Hope this help.
    ka
    Kamran Amin
    Framework, Inc.
    303 South Broadway
    Tarrytown, NY 10591
    (914) 631-2322x121
    [email protected]
    http://www.frameworkinc.com/
    -----Original Message-----
    From: Robinson, Richard [mailto:[email protected]]
    Sent: Thursday, November 04, 1999 7:23 AM
    To: [email protected]
    Subject: (forte-users) Ok, what's the "secret" for setting server side
    environment varia bles when running in the Forte Development
    Environment?
    Subject says it all.
    We have a bunch of environment variables that are used by the server side
    objects. What I want to do is change the value of some of the variables
    prior to running my application in Forte Development IDE (3.0.G.2). I've
    tried to set the environment variables via NT's registry, but it appears
    that at execution time the variables take on the value of whatever they are
    for the node manager.
    Most IDE's I've worked with before have a way to specify environment
    variables right in the tool. Forte doesn't appear to have that capability -
    say it ain't so!
    Any clues?
    For the archives, go to: http://lists.sageit.com/forte-users and use
    the login: forte and the password: archive. To unsubscribe, send in a new
    email the word: 'Unsubscribe' to: [email protected]

  • What is the password for predefined SYSTEM account

    Hi ,
    i am trying to use predifined account called as 'SYSTEM' to assign priviliges to a user .
    But i am unable to login into SYSTEM account .
    please tell me what is the password for this SYSTEM account . . Thanks

    If anybody has forgotten their SYSTEM account , do this way
    Start SQL*Plus (Start -> Programs -> Oracle – Instance Name -> Application Development -> SQL Plus).
    At the login prompt, in the user-name field, type ”/as sysdba” (including the forward slash, but without the quotes). Click OK.
    You are now connected as system with full DBA rights.
    To reset the password of the SYSTEM password (or any other user password), run the following query:
    alter user system identified by NewPasswordHere;
    Keep helping others .

  • My ipod nano 6th gen fell out of my pockey and the screen cracked badly, is there any coverage for this under warranty? I just bought it a month ago. If not what are the options for getting it fixed

    My ipod nano 6th gen fell out of my pocket and the screen cracked badly, is there any coverage for this under warranty? I just bought it a month ago. If not what are the options for getting it fixed? It is pretty frustrating, it fell from about 3 feet out of my pocket and now looks like it was beaten by a hammer.

    Debbie:
    deborahfromwindsor wrote:
    he advises restarting by inserting the OSX disc and pressing down the C button to reboot from there then selecting disk utility, hard disk and repair.... Does he mean me to hold down the C key on the alpha keyboard or the ctrl key?
    Should I just ask for my money back??? If it is a simple repair do I just literally push the disc in, push the power button and hold down the C button?
    That's where I would begin, too, with
    Repair Disk
    Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
    Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
    Select your HDD (manufacturer ID) in the left panel.
    Select First Aid in the Main panel.
    (Check S.M.A.R.TStatus of HDD at the bottom of right panel, and report if it saysanything but Verified)
    Click Repair Disk on the bottom right.
    If DU reports disk does not need repairs quit DU and restart.
    If DU reports errors Repair again and again until DU reports disk is repaired.
    If DU reports errors it cannot repair you will need touse autility like TechTool Pro,Drive Geniusor DiskWarrior
    First we need to determine if the issue you are experiencing with the computer is software or hardware based. Once we have gotten things sorted out there should be time enough to make you decision about keeping or returning it.
    cornelius

  • What is the query for Accounts Payable Trial Balance (APXTRBAL) in 11.5.10?

    Hi Guys,
    What is the query for Accounts Payable Trial Balance (APXTRBAL) in 11.5.10?
    I have to write an AP Invoice Aging Report in Discoverer to show all unpaid invoices that have been transferred into GL... Business wants it to match one-to-one with the AP Trial Balance standard report...
    Business wants to run the report for any date in a past...
    The report has two parameters:
    As Of Date - the same as As of Date for the AP Trial Report
    Trial Balance Run Date - the date when Trial Balance was run...
    Conditions are:
    TRUNC(Invoice Date) <=TRUNC(NVL(TO_DATE(:As Of Date),SYSDATE))
    TRUNC(NVL(Payment Date,'01-JAN-5000')) > TRUNC(NVL(TO_DATE(:As Of Date),SYSDATE))
    TRUNC(Invoice Creation Date) <= TRUNC(NVL(TO_DATE(:Trial Balance Run Date),SYSDATE))
    Distr Accounting Date <= TRUNC(NVL(TO_DATE(:As Of Date),SYSDATE))
    NVL(Distr Creation Date,Invoice Creation Date) <= TRUNC(NVL(TO_DATE(:Trial Balance Run Date),SYSDATE))
    Show_Flag = 'YES', where:
    Show_Flag = CASE WHEN ( NVL(Cancelled Date,'01-JAN-1901') > NVL(:As Of Date,SYSDATE) AND NVL(Inv Amount Aud,0) = 0 ) THEN 'YES' ELSE ( CASE WHEN NVL(Inv Amount Aud,0) = 0 THEN 'NO' ELSE 'YES' END ) END
    There is a difference between the logic of my report, and the logic of AP Trial Balance...
    Could you please advise what I'm missing?
    Thanks,
    Iana

    What is the query for Accounts Payable Trial Balance (APXTRBAL) in 11.5.10? You can get the code by opening the report in Reports Builder and get the query.
    Or, enable trace/debug as per (FAQ: Common Tracing Techniques within the Oracle Applications 11i/R12 [ID 296559.1]).
    Thanks,
    Hussein

  • What is the number for Verizon Wireless  Corporate Customer Service Complaint for CA

    My Complaint:  I have been a Verizon Wireless customer for approx 20 years.  I called customer service to seek an early upgrade for my daughter's phone. She is away in college and her phone is malfunctioning.  She is eligible for an upgrade in approx 6 weeks so I did not want to spend the money on a replacement phone when since we were planning on updating to something newer.  The customer service rep to me they could not do the early upgrade an to call back in a few weeks. After explaining this was unacceptable (I do not like the idea of a young female being out of state and away from home with no reliable means of communication), she places me on hold to later return with the only offer of  I must purchase a new device through her ( over the phone) which will be shipped to me, the phone was priced $100.00 more than the online price (they will not price match), plus i must pay $30.00 upgrade fee, $35.00 activation fee and taxes on the retail price of the phone.  I am upset and disappointed with the quality of service provided by Verizon being a 20 year customer.  If not for the seriousness and urgency of this matter, i would not have asked for an early upgrade.  It is times such as these that you get to see how much of a "valued customer" you really are.   I guess you are valued as long as you pay your bill and continually  purchase their products.  I would like to speak with someone from Verizon's corporate or customer relations department.  As of now I am really considering changing my service to a different provider.  I have multiple accounts with Verizon and i will canx each after the current contract committment expire (starting with my daughter's phone which expires in 6 weeks) In the meantime I will go purchase her a new phone with someone else and take comfort knowing she will have reliable communication.

    I started with them in 1985. It has been wonderful service but very expensive. They seem to operate on day of deposit day of withdrawal. That means that I have no benefits nothing beyond the normal customer if I don't pay my bill they shut me off. That's why I have switch to another provider and I have better service lower cost and better phones. you can't beat  other providers I mean it. Please don't expect more from verizon other than a "pay me more money and I'll do what you want" because it's all about money. Read the transcripts from current Verizon employees all over the internet. The company is going down and they're taking customers with them.
    msvat <[email protected]> wrote:
    msvat  created the discussion
    "What is the number for Verizon Wireless  Corporate Customer Service Complaint for CA"
    To view the discussion, visit: https://community.verizonwireless.com/message/1113982#1113982
    >

  • In Address Book, Lion, what are the checkmarks for when you Edit a Contact?

    In Address Book for Lion, when you are in the Add/Edit a Contact window, what are the checkboxes for?

    I am not seeing any checkboxes when I edit in Address Book in Lion, can you take a screen shot (Shift Command 4) of what you're seeing and post it?
    BTW please fill out your profile (under Your Stuff above) so we know what machine and version of Lion you're using.

  • What is the procedure for a hard boot of my iPod touch 4th generation without itunes, and without computer, and without iPod data screen.?

    What is the procedure for a hard boot of my iPod touch 4th generation
    without iTunes, and without computer, and without iPod data screen?
    6 months after purchase I updated my iPod touch as recommend by iTunes.
    It has not worked since that day.  It frozen (disabled) with a "connect to
    iTunes" icon displayed...that is the only thing it does.  itunes does not
    recognize the iPod.  My Windows7 computer recognizes an Apple device. 
    Other computers recognize the devise but if iTunes resided on that
    computer it did not recognize the iPod
    I suffered a setback with deep depression and am just now getting out of it enough to do something.  The depression prohibited me from taking action.
    I have done every procedure recommended from Apple help and external
    sources.  I did this thoroughly with help for other owners and IT experts,
    Apple employees etc etc.  I and associates have perform reboots utilizing a
    number procedure using only button on the iPod.  These were unsuccessful
    also have performed.
    Please do not ask me to do the usual.
    Online I saw  a process using the buttons on the iPod to completely
    reformat 
    the iPod.  It was NOT the hold buttons for 10 sec let go of one wait 8 sec
    etc.  I can not find the process now...a friend showed it to me in passing
    I have lost contact with him.  This is the procedure, I believe, that with
    enable me to update and use the iPod. 

    You need an internet connection and likely a computer with iTunes but an iPhone, iPad or iPod touch with the FindMy iPhone App may work by:
    If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone and use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
    You can also wipe the iOS device by installing the FindMyiPhone app on another iOS device and using that app to wipe the device.
    Otherwise
    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Forgot passcode or device disabled
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:                                                             
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes       
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:           
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.
    Yo may have to go to an Apple store or a friend's house with an internet connection and iTunes.

  • TS1702 I use iphone5, I see an app update on the app store. but when App store and click on the update tab, it doesn't show me which application to update.. just give me a blank page.!!!! what is the solution for this.!!!!

    I use iphone5, I see an app update on the app store. but when App store and click on the update tab, it doesn't show me which application to update.. just gives me a blank page.!!!! I wouldn't able to know what app has to be updated, untill and unless i get check for each every app on the app store installed on my iphone... what is the solution for this.!!!! can any1 one help me out.!!!!

    Cc2528 wrote:
    The iTunes Store on my iPad is set up with all my music already. And at the very bottom it shows my apple Id username. The only place it shows the previous owners id is in the App Store...
    You can probably change the ID in the "iTunes and App stores" settings on the iPad....click on the wrong account ID , select sign out, then log in with your own ID, I have not done this but I think it works.....
    but I would be more inclined to to the factory reset and start afresh.

  • What is the alternative for DisplayMemberPath="Value" for Windows Store applications?

    I think there is a bug with Windows Store Applications when it comes to using DisplayMemberPath="Value".
    Here is my code
    <ComboBox Height="40" VerticalAlignment="Stretch" SelectedValuePath="Key" DisplayMemberPath="Value" x:Name="comboBox1" FontSize="25"/>
    var source = new Dictionary<string, double>();
    source.Add("Item1", 0.4);
    source.Add("Item2", 0.3);
    source.Add("Item3", 0.1);
    source.Add("Item4", 0.1);
    var formateDSource = new Dictionary<string, string>();
    foreach (var item in source)
    formateDSource.Add(string.Format("[{0}, {1}]", item.Key, item.Value), item.Key);
    comboBox1.ItemsSource = source;
    If you use this code in WPF in works perfectly. However if you use this code in a Windows Store Application then the Combo Box is empty and an error is thrown. So is there an alternative way to do this in Windows Store Applications and have I unearthed a
    bug? Because I have researched the Web for days and found no solution to this.*please do not comment unless you have tried my code as a Windows Store App not a WPF in Visual Studios. Can Someone post an example based on my code that works in Windows Store
    Apps please because this is terrible.
    Thanks

    It looks like you got an answer on SO:
    http://stackoverflow.com/questions/29817124/what-is-the-alternative-for-displaymemberpath-value-for-windows-store-applicat
    This does look like a bug.
    Matt Small - Microsoft Escalation Engineer - Forum Moderator
    If my reply answers your question, please mark this post as answered.
    NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with undefined
    objects and unknown namespaces.

  • What are the steps for loading master data

    Hello
    what are the steps for loading master data? i want to learn about loading all master data and the steps to choose the best way to load the data.
    if anyone has documents please send me the documents i will be really greatful
    [email protected] thanks everyone
    Evion

    Hi Heng,
    Download the data into a CSV file.
    Write a program using GUI_UPLOAD to upload the CSV file and insert records.Chk the below link for example
    http://www.sap-img.com/abap/vendor-master-upload-program.htm
    Reward Points for the useful solutions.
    Regards,
    Harini.S

  • What are the settings for Primere Elements 9 if I've filmed with a Canon Powershot sx50 HS?

    I just got this camera and I want the best quality possible. Unfortunately, it's hard for me to fully know if the settings I try create that. I get a fuzz or noise on objects like if I'm wearing a black jacket it's like static. When I put the video on my phone which is an Android Galaxy s4 it converts it into mp4 format and I get much more clear results than on my computer which perplexes me. I did a lot of trial and error with my previous camera (JVC Full HD Everio) which I got the same results. My newer Canon should be leagues ahead of the JVC, but I really can't tell as of yet. If anyone could help that would be awsome. I have examples of my trials and errors from my Youtube videos which you can see I felt I was slowly making progress with the JVC Oppositeofhood - YouTube

    Opposite
    Then I saw your latest post
    Wait, I think I just found it. I pressed record on different settings to take pictures with like portrait to see if it would make a difference and when I uploaded them to my computer I found where it shows the BIt rate and it varied. They run at 23 frames per second 1920 x 1080 MOV video files and all the Bit rates are like 36,356 35,414 ,36,521
    If your camera is recording with a variable bitrate, the Bitrate variations from file to file should not be contributing to the issue. But it does raise the issue related to whether or
    not we are setting the appropriate bitrate level in the export settings. What are the units for 36,356, 35,414, and 36,517 -
    kbps (also can be written Kbps) and is kilobits per second
    or
    Mbps which is megabits per second.
    Let us try this for one of your 1920 x 1080p24 videos.
    Go through the following workflow
    Manually set project preset...
    NTSC
    DSLR
    1080p
    DSLR 1080p24
    When you go to export your edited Timeline content, then use
    Share
    Computer
    QuickTime
    with Presets = NTSC DV 16:9 - that is going to be customized to 1080p24 (H.264.mov) under the Advanced Button/Video Tab of that preset
    The essential settings under the Advanced Button/Video Tab
    Video Codec = H.264
    Frame Width = 1920
    Frame Height = 1080
    Frame Rate = 23.976
    Field Type = Progressive
    Aspect = Square Pixels (1.0)
    Now here is where we are going to experiment....
    Bitrate
    Check Mark next to Limit Data Rate to and type in 36000 before kbps
    note the file size of the export as well as the quality of the playback.
    Repeat the whole process but in export
    Remove the check mark next to Limit Data Rate. The Bitrate field will be disabled.
    note the file size of the export as well as the quality of the playback.
    We will be watching for your results.
    Thanks.
    ATR

Maybe you are looking for

  • Invoice & credit memo

    hi all, i understand from forum that : Invoice / credit memo - GR/IR clearing account and vendor account qty and value will give impact to GRC Subsequent credit/debit - Stock account and vendor account example of credit memo : Credit memo is posted w

  • I tried to update my iphone 4s to iOS5.0.2 from 5.0.1 and now my phone won't turn it.

    Hi there, i recently got my iPhone 4s from Canda and now im using it with an Australian SIm card ( yes it works ). My iphone 4s is still running on iOS5.0.1 and i just tried to update it through my phone (not on the computer). When it finished updati

  • Deploying a book layout across multiple Macs

    Hi there, I'm trying to set up several Macs so users can take advantage of iPhoto's book feature to create simple portfolios. I've modified a couple of themes by specifying type faces, -colours and -sizes and would now like to copy these empty layout

  • SOAP adapter - Tricky scenarios

    Can anyone tell me if there are any tricky scenarios with SOAP adapter? -Naveen.

  • SAP AFS - change in allocation status

    Gurus, Is there anyway that i can tell who changed the allocation status of an item from R (reserved) to F (fixed). Regards, ottley.