Re: Where to find Continua Bluetooth Manager?

I am looking for the Continua Bluetooth Manager for Windows, manufactured by Toshiba, but I have no idea where to find it. This (http://continuaalliance.org/certified-products/continua-bluetooth-manager-for-windows-manufactured-by-toshiba.html) is the only thing I find, but where to download it?

Are you searching for Toshiba SDK for BT developers?
Here check this:
http://aps2.toshiba-tro.de/kb0/HTD9602MK0000R02.htm
Found also interesting thread about similar question:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=57899

Similar Messages

Where to find Analytic Workspace Manager for Oracle9i?

Hi,
I am looking for Analytic Workspace Manager for Oracle 9i. Could someone point me to the place it can be downloaded? On Oracle OTN there are only versions 10g and 11g. I couldn't find it on Metalink either.
Why I need so old version? We are about to upgrade our existing installation from 9i and I need it to see what's inside in our Oracle 9i database (9.2.0.6) before going into 10g.
Or maybe it is possible to use AWM 10g against database 9i? This would solve my problems.
Is it possible to upgrade analytic workspaces from oracle 9i into 10g with analytic workspace manager 10g?
Best wishes
Tomasz Michniewski

Hello Laura,
Well, I was looking for this 9i version of AWM, and I was even thinking that AWM does not exist for 9i. Especially that in 9i documentation AWM is not mentioned.
But in the meantime I have found some install from some our backup cd-rom. It says:
# Analytic Workspace Manager : 9.2.0.4.1
# DATE: September 26, 2003
# Platform Patch for : platform independent
# Product Version # : 9.2.0.4.1
# Product : Analytic Workspace Manager
# Platforms
# Analytic Workspace Manager uses a platform independent install and
# has been approved on the following platforms:
# - Windows NT 4.0, 2000 & XP
# - Solaris 32 & 64-bit
# - Linux 32-bit
# - AIX 64-bit
# - HP-UX 64-bit
# - Tru64
# Requirements
# The Analytic Workspace Manager client requires the following Oracle9i
# Database configuration:
# - Oracle 9.2.0.1.0 Enterprise Edition Database
# - RDBMS 9.2.0.4.0 patch set (PS# 3095277)
# - OLAP 9.2.0.4.1 patch (PS# 3084634)
So is it the AWM for 9i?
Best wishes,
Tomasz Michniewski

Where do I find the "Node Manager" service?

Can anyone tell me where to find the "Node Manager Service" In Call Manager 5.1.2 or IPCC 4.5?
My db_CRA database in IPCC is not updating the real time ICD statistics table and Bug CSCsc09160 seems to indicate that stopping and starting the "Node Managers" may fix the issue.
From the bug report:
Symptom:
Under the db_cra two tables (RtCSQsSummary and RtICDStatistics) are not updating. They stop updating concurrently with engine failovers and reboots. Only a hard reboot or a
service failover brings them back into an active state.
When the RtCSQsSummary and RtICDStatistics tables do update on the
primary DB they do not update on the secondary DB and the data on them
doesnt get refreshed.
Conditions:
stopping Node manager on node 1, data fails to be written to node 2. Then when we start NM back up on node 1 data is still not written to either data store
Workaround:
Not much as a workaround, because the solution requirs stop on both Node
Managers and bring up node 1 first and the data starts writing to DB
again.
Thanks,
Brian

Post Author: jsanzone
CA Forum: Authentication
Sven,
The reference to Session Manager is more of a concept of operations versus an entity. The portion of code that you copied and pasted in your post is actually part of the verbiage used in an ASP script that BusinessObjects expects you to create in order for you to obtain your objective. You can use this coding to create your own customized script or you might be able to search around on the web for a more complete solution.

Where do I find the bluetooth on my iphone 4

Hi guys, I recently moved from Nokia C7 to iphone 4. I still have some music and photos on the c7 that I'd like to transfer to the iphone using bluetooth.
The problem is I don't know where to find the bluetooth on the iphone.
Please help.

iOS does not have the BT profiles for transferring files. You can't do what you want. You're going to need to transfer the content from the old phone to your computer. From there you should be able to transfer it to your iPhone using iTunes/iCloud.

Where could I find the Loans Management in customizing?

Hi All,
Could anyone tell me where to find the Loans Management in customizing?
Thanks
Gandalf

Hi,
Loans management is part of SAP Banking from 4.7 version onwards. We need to activate EA-FS for this purpose.
Loans also can be maintained in TRM under product Interest Rate instrument. But it may not offer all the critical functionalities of loans management module.
thanks,
Kumar

Firefox is freezing. When I close Firefox, and try to re-start it, it will not open. I need to access Task Manager, where I find Firefox still running. I close Firefox in Task Manager & can re-start Firefox.

Firefox is freezing in the middle of a browsing session. When I close Firefox, and try to re-start it, it will not open. I need to access Task Manager, where I find Firefox to still be running. Once I close Firefox in Task Manager, I can re-start Firefox. This can happen several times in the space of a few hours? I'm running Vista Home premium with Firefox 3.6.16, and this problem has only started in the last 4 weeks. Can Anyone Help? Core 2 Duo E7300 with 4GB RAM.

Sounds like it is hanging when you exit and later try to restart Firefox.
* How to stop the running Firefox process
** In Task Manager, does firefox.exe show in the '''Processes''' tab?
** See: http://kb.mozillazine.org/Kill_application
**Windows 7 users: http://www.techrepublic.com/blog/window-on-windows/reap-the-benefits-of-windows-7s-task-manager/2576
* What may cause Firefox to hang at exit
**Windows 7 Task Manager: http://www.techrepublic.com/blog/window-on-windows/reap-the-benefits-of-windows-7s-task-manager/2576
** http://support.mozilla.com/en-US/kb/Firefox+hangs
** http://kb.mozillazine.org/Firefox_hangs
** https://support.mozilla.com/en-US/kb/Firefox+is+already+running+but+is+not+responding
* You may need to try Firefox Safe Mode
** You may need to use '''Safe Mode''' to locate the problem: ***See: http://kb.mozillazine.org/Safe_Mode
***Firefox 4 users, hold the Shift key while clicking the Firefox 4 desktop icon to enter Safe Mode.
***Firefox Safe Mode is a diagnostic mode that disables Extensions and some other features of Firefox.
****In Firefox 4, Safe Mode also disables Plugins and Hardware Acceleration.
****If you are using a theme, switch to the DEFAULT theme: Tools > Add-ons > Themes '''before''' starting Safe Mode (In Firefox 4, Tools > Add-ons > Appearance). See: http://support.mozilla.com/en-US/kb/Using%20themes%20with%20Firefox#w_managing-themes-and-personas
****When entering Safe Mode, do not check any items on the entry window, just click "Continue in Safe Mode".
****Test to see if the problem you are experiencing is corrected.
*** If the problem does not occur in Safe-mode then disable all of your Extensions and Plug-ins and then try to find which is causing it
***#by enabling '''one at a time''' until the problem reappears.
***#You can also enable a few at a time (3-5), keeping track of what you just re-enabled to see if the problem re-occurs; this will help narrow down the possibilities if you have a large number of add-ons.
***#'''You MUST close and restart Firefox after EACH change''' via File > Restart Firefox (on Mac: Firefox > Quit).
***#You can use "Disable all add-ons" on the Safe Mode start window.
**See the following for more information
*** http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes
*** http://support.mozilla.com/en-US/kb/Troubleshooting+plugins
*** http://support.mozilla.com/en-US/kb/Basic+Troubleshooting
 
 
'''You need to update the following:'''
*Adobe Shockwave for Director Netscape plug-in, version 11.0
*Shockwave Flash 10.2 r152
#'''''Check your plugin versions''''' on either of the following links':
#*http://www.mozilla.com/en-US/plugincheck/
#*https://www-trunk.stage.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#*There are plugin specific testing links available from this page:
#**http://kb.mozillazine.org/Testing_plugins
#'''Update Shockwave for Director'''
#*NOTE: this is not the same as Shockwave Flash; this installs the Shockwave Player.
#*Use Firefox to download and SAVE the installer to your hard drive from the link in the article below (Desktop is a good place so you can find it).
#*When the download is complete, exit Firefox (File > Exit)
#*locate and double-click in the installer you just downloaded, let the install complete.
#*Restart Firefox and check your plugins again.
#*'''Download link and more information''': http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox
#'''Update the [[Managing the Flash plugin|Flash]] plugin''' to the latest version.
#*Download and SAVE to your Desktop so you can find the installer later
#*If you do not have the current version, click on the "Player Download Center" link on the "'''Download and information'''" or "'''Download Manual installers'''" below
#*After download is complete, exit Firefox
#*Click on the installer you just downloaded and install
#**Windows 7 and Vista: may need to right-click the installer and choose "Run as Administrator"
#*Start Firefox and check your version again or test the installation by going back to the download link below
#*'''Download and information''': http://www.adobe.com/software/flash/about/
#**Use Firefox to go to the above site to update the Firefox plugin (will also install plugin for most other browsers; except IE)
#**Use IE to go to the above site to update the IE ActiveX
#*'''Download Manual installers'''.
#**http://kb2.adobe.com/cps/191/tn_19166.html#main_ManualInstaller
#**Note separate links for:
#***Plugin for Firefox and most other browsers
#***ActiveX for IE

Hi, how do I manage storage? Disk Utility says "other" is taking up most of my storage but I don't know where to find "other". Please help!

Hi, how do I manage storage? Disk Utility says “other” is taking up most of my storage but I don’t know where to find “other". Please help!

For information about the Other category in the Storage display, see this support article. If the Storage display seems to be inaccurate, try rebuilding the Spotlight index.
Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
iPhoto ▹ Empty Trash
Do the same in other applications, such as Aperture, that have an internal Trash feature. Then restart the computer. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation—not the mythical 10%, 15%, or any other percentage. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Ask for instructions in that case.
See this support article for some simple ways to free up storage space.
You can more effectively use a tool such as OmniDiskSweeper (ODS) or GrandPerspective (GP) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one. Note that ODS only works with OS X 10.8 or later. If you're running an older OS version, use GP.
Deleting files inside a photo or iTunes library will corrupt the library. Changes to such a library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS or GP can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
Install the app you downloaded in the Applications folder as usual. Quit it if it's running.
Triple-click anywhere in the corresponding line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper 2>&-
sudo /Applications/GrandPerspective.app/Contents/MacOS/GrandPerspective 2>&-
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Paste into the Terminal window by pressing command-V. You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. Ignore any other messages that appear in the Terminal window.
The application window will open, eventually showing all files in all folders, sorted by size. It may take a few minutes for the app to finish scanning.
I don't recommend that you make a habit of doing this. Don't delete anything as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with the app, quit it and also quit Terminal.

Where to find javax.management.snmp package

where can i find the javax.management.snmp package? i have downloaded the java management extension (jmx) package, but the snmp package was not included.

I think you can't find the jmx snmp package because it's currently under development.

Where to find Enterprise Manager 10g Java Console software on OTN?

Hi All, Please let me know where to find Enterprise Manager 10g Java Console software on OTN? Appreciate your help!
Thanks!

"The Java Console program is on the Oracle 10G Client software CD. When you are prompted to choose the type of installation, select the Administrator option and the Java Console will be installed with the rest of the software. After the installation is complete, navigate to the Oracle home's bin directory where you installed the Oracle Client and type in:
oemapp console
"

Where can i find the file manager of yendo?

where can i find the file manager in yendo phone(sony ericsson)

I do not think there is a default file manager in the Yendo.
I think you have to connect your phone via the USB cable to the PC in Mass Storage Mode and use the PC file manager.

Where do i find the subscription manager?

where do i find the subscription manager?

Post Author: jsanzone
CA Forum: Authentication
Sven,
The reference to Session Manager is more of a concept of operations versus an entity. The portion of code that you copied and pasted in your post is actually part of the verbiage used in an ASP script that BusinessObjects expects you to create in order for you to obtain your objective. You can use this coding to create your own customized script or you might be able to search around on the web for a more complete solution.

Where do I find the Session Manager?

Post Author: sven
CA Forum: Authentication
Hello,Trying to figure out how users can access the reports from InfoView without having to authenticate themselves to the external SQL-server DB all the time. On Page 94 in the document called 'Business Objects Enteprise XI Release 2 Administrator's Guide' I find the following text: Use the session manager to create a trusted principal and log on to the CMS:ISessionMgr sessionMgr = CrystalEnterprise.getSessionMgr();ITrustedPrincipal trustedPrincipal = sessionMgr.createTrustedPrincipal("userName", "cmsName");IEnterpriseSession enterpriseSession = sessionMgr.logon(trustedPrincipal); Where can I find the session Manager? I can't find it

Post Author: jsanzone
CA Forum: Authentication
Sven,
The reference to Session Manager is more of a concept of operations versus an entity. The portion of code that you copied and pasted in your post is actually part of the verbiage used in an ASP script that BusinessObjects expects you to create in order for you to obtain your objective. You can use this coding to create your own customized script or you might be able to search around on the web for a more complete solution.

Where can I find Microsoft.SqlServer.Management.Smo?

Where can I find Microsoft.SqlServer.Management.Smo? Is this a separate download?

if i cnt found the C:\Program Files\Microsoft SQL Server\90\SDK folder~how i gotta find the Microsoft.SqlServer.Management.Smo?

Where to find weblogic.management package

serverConfigInfo.java:3: package weblogic.management does not exist
import weblogic.management.MBeanHome;
I am getting the above error while excuting the code. from where should i import weblogic.management package?

you should include the library that contains this package in your class path.
search weblogic.jar or something like that in the weblogic library directories.
in order to know whether the package needed is included in a jar file, open this latter with winzip and look for MBeanHome (in weblogic/management directory)
hope that helps

I have a iMac 21,5" Intel mid 2011 and I need to know if is possible I change the original 500Gb HD for a 512Gb SSD? If yes, where I find a tutorial about this? Thanks a lot and best regards all.

Hi people,
I'm typing from Brasil, sorry my English.
I have a iMac 21,5" Intel mid 2011 and I need to know if is possible I change the original 500Gb HD for a 512Gb SSD?
I intend to keep the original DVD driver and install the SSD in the same HD place.
If yes, where I find a tutorial about this?
And I will like to know if the 512GB Solid-State Drive Kit for Mac Pro is compatible with iMac.
http://store.apple.com/us/product/MC731ZM/A/512gb-solid-state-drive-kit-for-mac- pro?fnode=5f
What brand and model of SSD do you recommend?
Thanks a lot for now and best regards all.
Carlos Sgrillo
Porto Alegre, RS, Brasil

Tukaine
Sep 23, 2012 10:59 PM
Since the late 2009 iMacs came out, replacing the hard drive has caused the internal Hard Drive Fan to start running at around 6000RPM.
This is due to Apple replacing the external Hard Drive temperature sensor with a proprietary firmware and using the drives internal sensor.
Replacement drives do not contain the firmware to deliver temperature data on the temperature sensor cable.
When the iMac does not receive a good signal from the hard drive it puts the fan at full speed to protect the drive.
If you replace your drive, your iMac will initially seem fine, but soon the fan will begin to speed up to full speed. Resetting the SMC (System Management Controller) will have a temporary effect, but again the fan will speed up.
Fixes people have used in the past included:
Using smcFanControl and the terminal to set a MAX speed for the fan and writing scripts to start this after every sleep/restart.
Shorting the temperature sensor cable (Not a possibility on 2011 iMacs) this tricks the iMac into thinking the drives temperature is very low, hence slow fan speed.
Both these fixes are less then perfect and leave the drive in a dangerous situation with no protection from overheating.
Another option people try is other Fan Control software. These programs will not work for this particular issue as they often only control the base speed, and if they do control the fans actual speed they rely on the temperature reported by the sensor which is now incorrect.
HDD Fan Control
HDD Fan Control works to fix this issue by reading the drives internal temperature using the S.M.A.R.T protocol and set the fans actual speed to a value good to protect the drive.
It runs at startup and continually to always control the fan correctly, prevent the loud fan noise and protect the drive from overheating
Instead of HDDFan Control, get the free SSDFan Control
http://exirion.net/ssdfanctrl/

Re: Where to find Continua Bluetooth Manager?

Similar Messages

Maybe you are looking for