Re: Where to get a cable for the 6230i

hiya i have got a 6230i and was wondering where i can get a usb cable from?Message Edited by ajak on 19-Jun-2006
09:57 AM

Depends on where in the world you are, unless you buy from a web retailer such as Expansys:
http://www.expansys.com

Similar Messages

ITrigue L3800 - Where do I get extension cables for the left & right speaker ? HELP !

@ reader : I have already contacted Creative Labs themselves but they unfortunately do not offer any extension cables that run between the left or right speaker and the sub-woofer. And since the connection into the sub is a weird looking '3 pins stacked on eachother' type, I am wondering if anyone has seen extension cables for connections like these.
I am grateful for any help on the issue (adresses, weblinks etc.), because it is really bothering me and the way I want to set up the system in my living room !
Have a great day !

OMS. If you can still find it. try searching for Opcode OMS (open music system) You need it to run usb midi interfaces in OS9. Good luck, I'd seriously consider getting Logic express.

'The cable for the PCI Ethernet is not plugged in' error

Hi everyone, I've installed a PCI network card for my G5, 1.8 (later model) single processor, and checked to make sure the card has the Realtek chips.
I've tried the D-Link DGE-528T which is meant to be OSX compatible but to no avail. I get the 'The cable for the PCI Ethernet is not plugged in' message. I've then tried the Pluscom with Realtek 8169 chip and again, get the same message.
I have a good understanding of networking, have installed several drivers, sometimes manually and I've used the terminal to recode the permissions. I've also removed the extension cache file but still no luck. I've also made sure to follow each install path from the package file and remove any older drivers. I've also installed the card in slot 1.
I don't think it is the card. Does anyone have any other ideas I could try?

Where did you get the drivers?
I've heard of people using D-Link routers, and even D-Link's USB/Wireless adapter, but I've never encountered anyone using a D-Link PCI ethernet card. A quick search didn't find any drivers and without that you're not going to get very far. I'm mildly impressed that the OS recognizes the card at all.

Shorter USB cable for the Dinc 2

Looking for a shorter length USB cable than the one that came with the phone.
Does anyone know if they make a short length (less than 3') USB cable for the Dinc 2?
If so where could I get one?
Thanks again.

You have heard of 'Tethering' witch is only available on the iPhone but not in the US (thank you AT&T). That is only for using the iPhone to connect a computer to the internet. Sorry

How can I get null values for the later weeks

Hi All,
When I execute this code I get the records till current week.
How can I display the output so that I get null values for the later weeks. (with the help of v_numOfWeeks variable in the code)
Thanks,
Vikram
DECLARE
   v_query VARCHAR2(4000);
   TYPE ref_cursor IS REF CURSOR;
   v_refcur ref_cursor;
   v_sum NUMBER;
   v_id NUMBER;
   v_name VARCHAR2(1000);
   v_weeknum NUMBER;
   v_pernum NUMBER;
   v_numOfWeeks NUMBER := 5;
BEGIN
v_query := ' SELECT SUM(product_bkg), postn_id, postn_tbl.postn_name, b.week_num, b.period_num
                          FROM ops_cv_extract b, (SELECT row_id, desc_text postn_name
                      FROM s_postn) postn_tbl
                      WHERE lvl_6_id = 5767
                      AND fiscal_year = 2008
                      AND b.week_num < 4
                      AND b.period_num = 3
                      AND b.postn_id = TO_NUMBER(postn_tbl.row_id)
                      GROUP BY postn_id, postn_tbl.postn_name, b.week_num, b.period_num
                      ORDER BY postn_tbl.postn_name, b.week_num';
OPEN v_refcur FOR v_query;
LOOP
   FETCH v_refcur INTO v_sum, v_id, v_name, v_weeknum, v_pernum;
   EXIT WHEN v_refcur%notfound;
   dbms_output.put_line('P'|| v_pernum||'W'|| v_weeknum||' '||v_name||' '||v_sum);
END LOOP;
END;
This is the output when I execute this code.
P3W1 COMM CNTRL ISAM 213 26961.61
P3W2 COMM CNTRL ISAM 213 12870.4
P3W3 COMM CNTRL ISAM 213 245.88
P3W1 COMM CNTRL ISAM 273 72831.2
P3W2 COMM CNTRL ISAM 273 8739.38
P3W3 COMM CNTRL ISAM 273 3764.92
P3W1 COMM CNTRL TAM 213 49844
P3W2 COMM CNTRL TAM 213 20515.17
P3W3 COMM CNTRL TAM 213 16167.46
P3W2 COMM CNTRL TAM 216 12561.4
P3W3 COMM CNTRL TAM 216 2027.1
P3W1 COMM CNTRL TAM 273 -3336.71
P3W2 COMM CNTRL TAM 273 -1376.68
P3W3 COMM CNTRL TAM 273 19707.42
P3W1 Damon Walters -609.07
P3W2 Damon Walters 30030.24
P3W3 Damon Walters 37475.1
This is the output I'd like to get
P3W1 COMM CNTRL ISAM 213 26961.61
P3W2 COMM CNTRL ISAM 213 12870.4
P3W3 COMM CNTRL ISAM 213 245.88
P3W4 COMM CNTRL ISAM 213
P3W5 COMM CNTRL ISAM 213
P3W1 COMM CNTRL ISAM 273 72831.2
P3W2 COMM CNTRL ISAM 273 8739.38
P3W3 COMM CNTRL ISAM 273 3764.92
P3W4 COMM CNTRL ISAM 273
P3W5 COMM CNTRL ISAM 273
P3W1 COMM CNTRL TAM 213 49844
P3W2 COMM CNTRL TAM 213 20515.17
P3W3 COMM CNTRL TAM 213 16167.46
P3W4 COMM CNTRL TAM 213
P3W5 COMM CNTRL TAM 213
P3W1 COMM CNTRL TAM 273 -3336.71
P3W2 COMM CNTRL TAM 273 -1376.68
P3W3 COMM CNTRL TAM 273 19707.42
P3W4 COMM CNTRL TAM 273
P3W5 COMM CNTRL TAM 273
P3W1 Damon Walters -609.07
P3W2 Damon Walters 30030.24
P3W3 Damon Walters 37475.1
P3W4 Damon Walters
P3W5 Damon Walters Edited by: polasa on Oct 28, 2008 6:42 PM

Sure, in a Single SQL ->
satyaki>
satyaki>select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - Prod
PL/SQL Release 10.2.0.3.0 - Production
CORE    10.2.0.3.0      Production
TNS for 32-bit Windows: Version 10.2.0.3.0 - Production
NLSRTL Version 10.2.0.3.0 - Production
Elapsed: 00:00:00.01
satyaki>
satyaki>
satyaki>-- Start Of Test Data --
satyaki>with week_tab
2 as
3    (
4      select 1 period_num, 1 week_num, 10 bkg1 from dual
5      union all
6      select 1, 2, 40 from dual
7      union all
8      select 1, 3, 30 from dual
9      union all
10      select 1, 2, 20 from dual
11      union all
12      select 1, 1, 10 from dual
13      union all
14      select 1, 1, 20 from dual
15      union all
16      select 1, 3, 10 from dual
17      union all
18      select 2, 1, 15 from dual
19      union all
20      select 2, 2, 20 from dual
21      union all
22      select 2, 3, 10 from dual
23      union all
24      select 2, 1, 15 from dual
25      union all
26      select 2, 2, 30 from dual
27      union all
28      select 2, 3, 20 from dual
29    )
30 -- End Of Test Data --
31 select period_num,
32         week_num,
33         (
34            select sum(week_tab.bkg1)
35            from week_tab
36            where period_num = m.period_num
37            and   week_num   = m.week_num
38            group by week_num, period_num
39         ) sum_bkg1
40 from (
41        select dum.week_num,
42              wk.period_num
43        from (
44                select 1 week_num from dual
45                union all
46                select 2 from dual
47                union all
48                select 3 from dual
49                union all
50                select 4 from dual
51                union all
52                select 5 from dual
53              ) dum ,
54              (
55                select distinct period_num
56                from week_tab
57          ) wk
58      ) m;
PERIOD_NUM   WEEK_NUM   SUM_BKG1
         1          1         40
         1          2         60
         1          3         40
         1          4
         1          5
         2          1         30
         2          2         50
         2          3         30
         2          4
         2          5
10 rows selected.
Elapsed: 00:00:00.48
satyaki>Regards.
Satyaki De.

When I download itunes, it says that Ipod Service failed to start. I checked the services under task manager and when I try to start it, it says access denied. How to I get access and for the ipod service to start and run?

Please help. My ipod classic could not be recognised by itunes when I connect my ipod to PC. Previously it has been recognised before I updated. This was a while ago now and so I removed all apple files and re installed the latest itunes but am having the same problem.
When I download itunes, it says that Ipod Service failed to start. I checked the services under task manager and when I try to start it, it says access denied. How to I get access and for the ipod service to start and run?

Some anti-virus programs (e.g., McAfee) have this rule that can be invoked under the "maximum protection" settings: PREVENT PROGRAMS REGISTERING AS A SERVICE. If that rule is set to BLOCK, then any attempt to install or upgrade iTunes will fail with an "iPod service failed to start" message.
If you are getting this problem with iTunes, check to see if your anti-virus has this setting and unset it, at least for as long as the iTunes install requires. Exactly how to find the rule and turn it on and off will vary, depending upon your anti-malware software. However, if your anti-virus or anti-malware software produces a log of its activities, examining the log may help you find the problem.
For example, here's the log entry for McAfee:
9/23/2009 3:18:45 PM Blocked by Access Protection rule NT AUTHORITY\SYSTEM C:\WINDOWS\system32\services.exe \REGISTRY\MACHINE\SYSTEM\ControlSet001\Services\iPod Service Common Maximum Protection:Prevent programs registering as a service Action blocked : Create
Note that the log says "Common Maximum Protection: Prevent programs registering as a service". The "Common Maximum Protection" is the location of the rule, "Prevent programs registering as a service" is the rule. I used that information to track down the location in the McAfee VirusScan Console where I could turn the rule off.
After I made the change, iTunes installed without complaint.

Why is the cable for the shuffle so short

why is the cable for the shuffle so short<should there be 2 cables.I have to havemy ipod dangling from the side of my computer(i have an all in one)

Assuming you have a 4th gen shuffle, it should be fine hanging off the computer, since the shuffle is so light. You can think of that cable that comes with the 4th gen shuffle as being more of an "adapter."
If you want a long cable, you can buy the replacement part. It comes with both a short adapter (like the one you have) and a long cable.
http://store.apple.com/us/product/MC003ZM/A/apple-ipod-shuffle-usb-cable
I use a USB hub, which I can conveniently locate on my desk. I connect the shuffle (and my other iPod/iPhone) to the hub. If you want a hub, make sure you get one that is self-powered (it has it's own power supply).

In my macbookpro airport showing as uninstalled. How do I install and will belkin wireless USB adaptor support in macbokpro software version 10.6.8. Where do I download driver for the same

In my macbookpro airport showing as uninstalled. How do I install and will belkin wireless USB adaptor support in macbokpro software version 10.6.8. Where do I download driver for the same

jeanfromisle-arné wrote:
I'm new to MacBook Pro.
My system is Mac OS X v.10.6.8.
I used to work on my 3000 photos with GIMP on a P.C, but since I had a breakdown, I would like to carry on on my Mac as soon as possible.
Figuring out unaided a new OS after a breakdown is the best prescription for another breakdown.
Before going back to editing your photos, I suggest you need to familiarise yourself with your new OS. Get a book (eg, David Pogue's "Missing Manual…") -- now, that Lion's been out and about for some time, you can probably get the Snow Leopard (aka Mac OS X v10.6) edition at a discount. Take the time to read it and understand it, and you'll spare yourself a mountain of frustration. There are enough similarities between Mac OS X and Windows to fool you into believing almost everything works the same way, when, of course, it doesn't -- many similarities are only skin-deep.
Once you've done that, you'll be in a better position to install and use GIMP or look for alternatives.
where do I find the exact version (in french)
For French issues, you are probably better off checking the forums on MacBidouille or MacGeneration.

HT4250 Does anyone know where to get a copy of the OS X 10.6.5 update? Apples' site says it can't find the page and the only other downloads i've found on the net say you need to have 10.6.5 to install 10.6.5. HUH?

Does anyone know where to get a copy of the OS X 10.6.5 update? Apples' site says it can't find the page and the only other downloads i've found on the net say you need to have 10.6.5 to install 10.6.5. HUH?

It's right here from Apple, at least for me.
Combo http://support.apple.com/kb/DL1324
Delta http://support.apple.com/kb/DL1325
Any reason you want the 10.6.5? You do know that the latest and final is the 10.6.8.

Failed to get airlineregion context for the spryregion1 region

Hi ,
I am new to spry and using Neston json dataset.
My data is uploding perfectly but i am getting an error like:-- "Failed to get airlineregion context for the spryregion1 region".
where airlineRegion is one of my parenbt regions.
Kindly suggest.
Satish.

Hi Satish,
You have not given us much to work on and especially because we do not get this error, I can only assume that you are not doing the right thing.
FYI I quote what is being suggested to newbies:
                        Announcement:
                        New to Spry, or the Spry forums?
                            Hide Details
Before you post a topic please verify
that:
You
are using the latest Spry files
The latest version of
the Adobe Spry Framework is 1.6.1, this is the same version that ships
with Dreamweaver CS4. If you use Dreamweaver CS3 (uses Spry 1.4), its
wise to upgrade your files to the latest version. This can easily be
done using the Spry Updater that can be found here.
Your
question was not asked before
Using the search
functionality on forums you can easily find out if your question has
been answered before. While you are in search, you can specify the
search locations. The Spry forum can be found under:
Adobe
Labs > Spry Framework for Ajax
Yoru question can not be
found in the existing documentation
Spry provides you
with allot of documentation this can found on different locations. In
the sidebar of this forum you can find a small summary of resources that
will help you on your way.
If these options do not apply to your question,
please be so kind to also supply the following information in your topic
together with a clear description of your issue:
What
browsers does this issue occure:
example: Internet Explorer 8 on
Window 7 and Firefox 3.0 on Mac OSX
What version
of Spry are using:
example: Spry 1.6.1 ( the version number can
be found in license header of the .css and .js files )
What
is the url of your website or page in issue:
example: http://www.example.com/page/in/issue.html
Step
to reproduce the issue:
example: Scroll down till you find the
header "help", there you will see a Spry Accordion. When you click on it
it will not open or close.
So users can provide you with a
better answer, without having to ask you for further details.
I look forward to helping you.
Ben

Do I need to buy any extra cables for the airport express??

I was wondering if i need to buy any extra cables for the airport exprees.what kind of cables do i have to get to connect the airport express to my DSL modem?

Typically all you would need is an Ethernet cable (cat5, rj45 end), and it would be connected to the LAN port on the DSL modem, and the Ethernet jack on the AP Express.

How to get Open Balance for the year and Total Ending Balance?

For a given account, how to get Open Balance for the year (Cumulative Ending Balance) and Total Ending Balance (Cumulative Ending Balance)?
Is there any function module available? or should I read from some tables? Please advice.

Hello Paul,
You could try calling one of the following BAPIs - see which one meets your requirement. They are documented well so shouldn't be a problem finding out the correct one for your requirements.
BAPI_GL_GETGLACCBALANCE
BAPI_GL_GETGLACCCURRENTBALANCE
BAPI_GL_ACC_GETBALANCE
BAPI_GL_ACC_GETCURRENTBALANCE
BAPI_GL_ACC_GETPERIODBALANCES
BAPI_COND_VAL_DECRE_BALANCES
You might have to put in some of your own logic after the BAPI call to get what you want.
Hope this helps,
Cheers,
Sougata.
p.s. Also look at FM FAGL_GET_ACCOUNT_BALANCE
Edited by: Sougata Chatterjee on May 7, 2008 11:47 AM

Any Function module or BAPIs are available to get scheme name for the inter

I have internal order no value in table AUFK-AUFNR , and the internal order corresponding Scheme value is available in IMPR-PRNAM . Now I want to inner join both the tables to extract the data , but there is no common field . Is there any Function module or BAPIs are available to get scheme name for the internal orders?

look at DB-VIEW "V_IVP_OR".
Regards,
Laurent

Unable to get Window Handle for the 'AxCrystalActivXViewer' control.

Hi,
I have Operating System : Windows 7 and Application developed in VS 2005 and I am using Crystal Report XI licenced version.
But when I am trying to use TTX(Field Defination) based reports it gives me "Unable to get Window Handle for the 'AxCrystalActivXViewer' control. Windowless ActivX Controls are not supported."
Please provide me solution for this ASAP as I am stucked on this from long lomg time.
-Regards
Swapnil

Appears you are installing an upgrade version.
Use these links:
http://downloads.businessobjects.com/akdlm/crystalreports/crxir2_sp4_full_bld_0-20008684.exe
http://downloads.businessobjects.com/akdlm/crystalreports/CRYSTALREPORTS06_0-20008684.EXE

How do I clear a song that won't download in Itunes? Also, can I get a refund for the song?

How do I clear a song that won't download in Itunes? Also, can I get a refund for the song?

Hi Allan ..
From your iTunes library, right or control click the song then click Delete.
Apple's policy states that, "all sales are final" >> iTUNES STORE - TERMS AND CONDITIONS

Re: Where to get a cable for the 6230i

Similar Messages

Maybe you are looking for