Re: Which programs and services will be installed
I have installed Windows 7 Home 32 on a Toshiba Satellite A210 (no upgrade - new installation) and I have later installed all Toshiba drivers from their website. I want to know which programs and services are installed from this three programs:
- Hardware Setup
- Utilities
- Value Added Package
I have installed all three programs but I can only find this programs:
- TOSHIBA Flash Cards
- TOSHIBA PC Diagnostic
In the settings of "Flash Cards" I can only disable the hotkey function which is not disabled.
But the keys F1 to F12 still don't work and I don't find the Toshiba hardware settings in the control panel.
So I want to check all programs and services from this three programs on the notebook.
John
This is a little bit complicated.
I presume you can remember how it works under Vista and I hope you can remember that on your desktop there was placed shortcut for Toshiba Assist. When you open Toshiba Assist you can find Hardware setup and all other Toshiba tools and utilities.
So you can install Assist designed for your notebook model and for Vista. I have installed it too.
Value Added Package contains several tools and utilities:
- Toshiba Components Common Driver
- Toshiba Utilities
- Toshiba PC Diagnostic Tool
- Toshiba Power Saver
- Toshiba Button Support
- Toshiba Zooming Utility
- Toshiba Flash cards
Install Assist and you will have access to all important tools and utilities.
Similar Messages
-
Hi,
I think this can be done in Unix, using telnet, you may log into the
system and install it.
Regards
Raj
Mozkill Williams wrote:
why is it that directory server and IAS will not install through a
remote Terminal Services session??
Try our New Web Based Forum at http://softwareforum.sun.com
Includes Access to our Product Knowledge Base! -
iTunes 11.2.2 for Windows x64 will not successfully install. Removed prior iTunes, and still will not install. 10.7 installs just fine, but constantly asks to upgrade to 11.2.2. Any Thoughts?
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component won't install normally.
If needs be, the Microsoft Program Install and Uninstall Utility (MS Installer "Fixit") may be able to help force through the installation.
tt2 -
I have iMac 105.8 and want to upgrade to Snow Leopard, so got the disc from apple on line store and it will not install, just keeps ejecting from my desktop
You have entirely too little free space on the boot drive, for best performance it's best to have hard drives only 50% filled max and never more than 80% filled.
See Storage Drive here and reduce some space also make a seperate bootable clone backup of all your data BEFORE upgrading
Most commonly used backup methods
see here for how to find your disk space
Why is my computer slow?
If you upgrade and it doesn't go right or slows the machine down you might need to erase and install, which all your programs will have to be reinstalled from original sources and files from backup.
How to erase and install Snow Leopard 10.6
If you can't do this, then hire a local PC/Mac specialist.
Do not upgrade to 10.7 or 10.8 on that older machine, it will slow down and you will lose all your PPC based programs.
Leave the Lions for a brand new machine with a SSD drive. -
when trying to down load new itunes version, I get airtraffichost.dll, and itnunes will stop installing. HELP ME
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The error hints at a similar pattern to those discussed in the first and third boxes of the user tip, suggesting that you've got an outdated .dll file that needs replacing. You should find AirTrafficHost.dll in the one of the following folders:
C:\Program Files\Common Files\Apple\Mobile Device Support
C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
Delete it and then repair Apple Mobile Device Support from the Programs and Features control panel. If that doesn't work go for the full tear down and rebuild.
tt2 -
I wrote an install program (.exe) that is downloaded from a website. When run, it 1) leads a customer to browse to a directory, and 2) copies files (.exe, .dll, etc.) from a website to that directory. When I run, the installed program works.
What are the steps to make it seamless for a customer to use the install program and then use the installed program?
bhs67This site https://msdn.microsoft.com/en-us/library/vstudio/2kt85ked%28v=vs.110%29.aspx provides a basic description of the Visual Studio Windows Installer.
Near the bottom of the page is "You can unlock all the features of InstallShield by paying to upgrade to the full version of InstallShield." Where do I find info that describes the differences between the "free" and the "full"
versions?
bhs67
Hello,
The default feature does support the task for your requirement, so there is no need to pay for the other features unless you want to use some feature which is not free.
In addition, as this thread
InstallShield LE not available with VS 2012 RTM? shared, even through there is a link to InstallShield LE in the New Project dialog under Deployment solutions, but it belongs to third-party that I would recommend you consider posting this issue
at the following forum to get supports about InstallShield.
http://community.flexerasoftware.com/forumdisplay.php?133-InstallShield
Regards.
Carl
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
TS3212 i had to reinstall iTunes and it will not install
i had to reinstall iTunes and it will not install it keep on relling back
You won't be able to install your original Acrobat 7 at all, or use your original serial number. The server which used to allow this was switched off.
But assuming you have a compatible system, like Mac OS 5 or Windows XP, licensed users of Acrobat 7 can download a replacement and get a replacement serial number.
Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3 -
MultiMedia Center for Think Offerings for Windows XP and 2000 -- will not install on Windows 7
MultiMedia Center for Think Offerings for Windows XP and 2000 -- will not install on Windows 7 in compatibility mode or any other way. I receive error " can not open \device\memory" and then " This program can not run on his hardware.
Thinkcenter E series 8291-ETU --- upgraded from XP to Windows 7 yesterday.
Any ideas on how to get this product installed in Windows 7 ?I recently did a clean install of Win7 Ult on my X61 7676A24, and this is the only Lenovo software that I could not find a Win 7 solution for. However,
1. I was able to load WinDVD8 upgrade (from Lenovo's Win7 information page) after first loading the WinDVD5 version that was the last good release for Vista.
2. The Multimedia Center for Think Offerings is basically Roxio's suite for writing cd/dvd's, drag to disc and so on.
Since I could not load this anyway, I was forced to try out Win7's inbuilt cd/dvd writing - it works perfectly well. Even better, Win7 natively supports an excellent ISO burning tool. So, I think if you explore these inbuilt tools, you can probably live without the Mul Cent for Think Off.
TP600E > T41 > X61 > X201T > X220 i7 IPS 8GB 160GB SSD -
I've been using Adobe Acrobat 7 for many years. I updated my full version of Acrobat 5 to get to 7. My hard drive crashed and I've been trying to reinstall Acrobat and it will not install. Adobe will not help because 7 is no longer supported. Does anyone know where I can go for help?
You won't be able to install your original Acrobat 7 at all, or use your original serial number. The server which used to allow this was switched off.
But assuming you have a compatible system, like Mac OS 5 or Windows XP, licensed users of Acrobat 7 can download a replacement and get a replacement serial number.
Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3 -
I am looking to start developing apps for the iTunes Store, but I have no previous experience. What is the best way for me to start on this? As in which programs and materials must I need and what I need to know. Thanks!
You will need a Mac, with OS X 10.6+ on it, to be able to develop iOS apps.
There is some info on these pages :
developer site : https://developer.apple.com
developing for iOS 7 : https://developer.apple.com/ios7/
developer support : https://developer.apple.com/support/
developer forums : https://devforums.apple.com/index.jspa (you will need to be a registered developer to access them) -
Hi, I have iPhoto'09 v8.1.2 (424). I have downloaded v9.2.1 update and it will not install.
Keeps asking for me to have v 9.0 or later. Now i have downloaded 9.1update plus 9.1.3 and they will not install either.
Do i need 9.0 and if so where do i get it? THANKS nomadregNo, iLIfe is a suite of applications: iMovie, iPhoto and GarageBand (earlier versions of the suite also contained iDVD ad iWeb).
Regards
TD -
I have lost my iMovie program and I can not install a new one. My computer says that it is not possible to download anything on my main drive
How full is your drive? You need at least 10/15% of free space.
-
I have downloaded my program and it will not extract. It suggests I download again.
I have downloaded my program and it will not extract. It suggest i DOWnload again What is the solution?
Same as in your otehr post: We need a lot more info.
Mylenium -
Who created which program and when?
Hi all,
Who created which program and when?
How can I get this info, thanks.
Deniz.Hi Thomas,
Yep True....
Very True...
Thanks for sharing your knowledge...
But If User wants something else in selection screen then what is available in standard se90 or se84 or any other TCODE or Program....
Again There can be many solution for one problem... And I provided one of the solution...
If user wants program type in seleciton screen
like
Created DATE
Created By
Modified DATE
Modified By
If user wants these and may be some other details in selection screen then ???
Alternative is to use direct SE16 as well...
So there are many solutions to one problem... it all depends on user/customer/client's requirement...
Correct me if i am wrong..
Thanks & Regards
ilesh 24x7 -
What can be done when Cold Fusion 9 ODBC Services will not install?
What can be done when 64-bit Cold Fusion 9 ODBC Service will not install on a Windows Server 2008-R2 64-bit machine? Yes, most of the things in other discussions have been tried.
Hi GDMVU,
Save the below code as CF9_RemoveOdbc.cfm
<cfscript>
//login using admin
//createObject("component","cfide.adminapi.administrator").login("administrator_password" );
createObject("component","cfide.adminapi.administrator").login("admin");
//instantiate datasource object
myObj = createObject("component","cfide.adminapi.datasource");
</cfscript>
<cfscript>
writeOutput("Removing ODBC Services...<br>");
returnValue = myObj.removeODBCservice();
writeOutput("ODBC Services removed");
</cfscript>
Save the below code as CF9_InstallOdbc.cfm
<cfscript>
//login using admin
//createObject("component","cfide.adminapi.administrator").login("administrator_password" );
createObject("component","cfide.adminapi.administrator").login("admin");
//instantiate datasource object
myObj = createObject("component","cfide.adminapi.datasource");
</cfscript>
<cfscript>
writeOutput("Installing ODBC Services...<br>");
returnValue = myObj.installODBCservice();
writeOutput("ODBC Services installed");
</cfscript>
Now try the following steps:-
Change admin password in above .cfm pages for your CF 9 server.
Use RemoveObdc cfm page first to remove any existing faulty/corrupted Odbc services.
Use InstallOdbc Odbc services to install Odbc services there.
Hope this helps.
Regards,
Anit Kumar
Maybe you are looking for
-
Hi, Can anyone please advise whether I will able to install SAP CRM 5.0 in my laptop having configuration as 500GB as HD, 4GB as RAM.Intel i3 processor,HP pavilion?
-
I have a form. When the user fills in the information, then click on the Create button, I like to have the form reset and the data displayed at the bottom. Every time the user fills in the info and click on Create, whatever the user just typed, the d
-
Trying to install software updates and keep geting this message. "You don't have permission to install updates" Anyone know how to fix?
-
I have a number of unresolved queries with BT that have been ongoing for quite some time. I have recently received a Final bill as BT seem to no longer want me as a customer and my emails are being ignored. I have advised them that i wish to escalate
-
duplicate of [/questions/952550] locked. Select websites are rendering text oddly no settings have been changed it just randomly started I have reset the browser I have even downloaded and updated to the newest firefox but as you can see from the ima