Re: Windows recovery icon disappeared

Dear All,
My pc (satellite A100) has been giving me problems after a virus infection. I decided to reinstall the OS but the recovery DVD 1 is damaged. I tried to create new discs but the icon for Windows recovery DVD has disappeared.
Could anyone give me the route and name of the exe file so I can try to execute it manually?
Thank you in advance for your help.

> I need the name of the exe file (ie. "xyz.exe") and if possible I would like to know the folder where it is located
It's not available on my lap anymore that's why i don't remember the exact name. But is sounds like *Trslauncher* and should be located in program files in Toshiba utilities folder. try this one:
http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/outFrm.jsp?ofId=AskIris&searchString=Recovery+Disc +creator&x=0&y=0
To be honest, i don't know if it will work.........

Similar Messages

  • Windows 7 icons disappear/reappear Green Progress folder bar issues with slow performance. HELP!!!

    Hi there, I hope someone can help me. This all started about a week ago. So I tried a fresh reinstall from my recovery disk. to no avail. Ok I have Home Premium 64bit and it seems my icons in my user folders and subfolders and the actual file icons are
    blank stand ard or missing. after a while they reappear to normal. the green progress bar in the explorer folders always lags and never fully completes. It hangs. Now I see that it takes 30 secs to get a program to open. Currently my control panel screen is
    blank and my connection between my ipod touch 5g and my desktop is very slow at data transfer. I'm going bonkers! The only things I altered was turning off WMM in my router, Installed a software someone gave me (only to find out it was a crack software) deleted
    that first! and used CCleaner to clean my registry

    Hi,
    So a total reinstall didn’t fix the issue?
    We may take a try with the following article to make Windows a better performance.
    Optimize Windows for better performance
    http://windows.microsoft.com/en-hk/windows/optimize-windows-better-performance#optimize-windows-better-performance=windows-7
    Then, please check to see if any new updates available, also the related drivers, make sure they are up-to-date.
    After that, if issue insists, please refer to the following article to run chkdsk command in CMD to check if there are disk issue.
    http://technet.microsoft.com/en-us/library/bb491051.aspx
    Best regards

  • I'm running iCloud on a Windows 7 PC. Photoes have been autmatically uploaded from my iPhone. However, the "Photoes" ICON does not load, and I receive an error message of a problem. Then the ICON disappears. How can I access my photoes?

    I'm running iCloud on a Windows 7 PC. Photoes have been autmatically uploaded from my iPhone. However, the "Photoes" ICON does not load, and I receive an error message of a problem. Then the ICON disappears. How can I access my photoes?

    Same issue here,  previously did work perfectly

  • After update iMovie and OS Yosemite recovery, iPhoto icon disappeared. How can I find photos stored on iPhoto?

    I am using iOS Yosemite 10.10.3. After update iMovie version 10.10.08 and OS Yosemite Recovery. iPhoto icon disappeared. I opened the Photos icon but all my images which used to be in iPhoto were not there. How do I access those images in iPhotos?

    Go to Finder>Applications and open the iPhotos app.
    Apple want you to use the new Photos app which now should be in your Dock. Photos will import your iPhoto library

  • Icons disappear in Cover Flow when window resized...

    I created a custom folder icon for my Pixelmator projects, applied it to the folder, and all looked to be perfect. However, I later discovered that when I resized the Finder window and the icon grows larger in Coverflow, my icon disappears! This seems to be the case for all of the icons I created. Is there something I'm missing? Did I do something wrong with the creation? Or is the template I'm using not working the way it's supposed to? I can post pictures or a screencast of my issue if it'd help...
    I got the template from the first post in http://forums.macrumors.com/showthread.php?t=392360
    _To give you a brief idea of my creation process:_
    1. Edited template in Pixelmator (added picture on top of folder).
    2. Exported file as PNG
    3. Using IconComposer, dragged in PNG, and exported icns file
    4. Using IconDroplet, I created a usable icon
    5. Went to "Get Info" on both files and pasted new icon
    I can't figure this out. Please help!

    Finally! I'm pleased to say that I was informed of a solution today on another forum. I downloaded the program img2icns, and everything looks to be working how I want it to. Hopefully that helps you out, too! I'm marking this one 'solved.'
    http://www.shinyfrog.net/en/software/img2icns/

  • Taskbar icons disappear in Windows 7

    I have recently installed Windows 7 Ultimate.  If I click on the taskbar icon for an open window/application, the window is minimised AND the task bar icon disappears.  I have to use ALT-TAB to find my window again.  It is infuriating. 
    I have Win 7 at work, and Win Vista on my laptop. In both cases clicking on the taskbar icon will miminise the window, but leave the taskbar icon.  Clicking the icon again will restore the window.  How do I set my Win 7 Ultimate to do the same?

    I'll do my best!
    not_a_computer_techie,
    I have to make at least a few assumptions, so bear with me.
    I'll assume you understand what the "Desktop" is.
    Right-click (your mouse) on the Desktop, (left-)click "New", click "Text Document", press "Enter" on the keyboard.
    Double-click the new text file you just created (named "New Text Document.txt").
    You'll either have to copy the following statements and paste them into the file, or if you don't know how, enter them by typing them in. Obviously, there's less chance of an error if you copy and paste them.
    taskkill /F /IM explorer.exe
    cd /d %userprofile%\AppData\Local
    attrib -h IconCache.db
    del IconCache.db
    start explorer
    Now, look at the top left of the window where you just entered or pasted the statements. You should see the words "File", "Edit", ..., "Help". Click "File", click "Exit". It will then ask if you want to save
    your changes; click "Save".
    Change the name of the file from "New Text Document.txt" to "New Text Document.bat" (i.e., change the last three characters from "txt" to "bat") and
    click "Yes" when prompted.
    Right-click "New Text Document.bat", click "Run as Administrator". You must now reboot your computer for the change to take place. Every program that had an icon missing will have the icon restored when the program is run.
    I recommend you rename the file from "New Text Document.bat" to "Icon Cache Refresh.bat" and save it somewhere for the next time this happens (and believe me, it will).
    Hammer842

  • Windows boot option icon disappear!

    Hi, I successfully installed Windows XP SP2 with bootcamp.
    I started successfully Leopard and Windows many times, then I installed VMWARE Fusion and I choose to use the fisical Windows partition as a virtual machine.
    Now I can choose to start windows or leopard only from bootcamp options in the preference of leopard or systemtray in windows: pressing "alt" button at startup shows me only MacOSX System and disappear windows disk Icons....
    How can i reconfigure boot option to show the windows icon too ? I don't want to reinstall beacuse it runs correctly ! it seems only a boot configuration...
    The console of leopard report something as com.appl.system service xml boot options do not match...
    Sorry for my bad english and thanks in advance for your help!

    I guess, I have to explain more...
    I know the way of selecting the boot drive( the way you mentioned)... My problem is after creating new partition with disk utility... I cann't any more boot to Win at startup. It seems that the Win startup partition is removed, but when I check it from OS in my FINDER, I can see the bootcamp partition and all my date inside..
    So, I need to know how can I again activate booting option to Win at startup(or something like this)

  • Windows 8 activation disappeared after rerolling t...

    Good day.
    I had purchased 02741N2 Nokia N2520 tablet through Nokia official e-store on 22.12.2013. Device’s IMEI is 358980050172098. For half a year the device was working fine so was Windows 8.
    Lately during the Windows update installation process, the tablet froze, and after that was working very unstable. I made a reroll to factory defaults, after which my Windows 8 activation disappeared. Now when I try to re-activate it, it throws an error (0xC004F012). The system asks me to enter the product key, which is stated on the device’s box, or the DVD that comes with it, or in the e-mail, that I was supposed to receive. But there’s NO product key on the box (only IMEI), and I haven’t received neither the DVD nor the e-mail.
                    I contacted the Nokia support in Russia (that’s where I live). We tried to activate Windows in many ways, but without success. Then they told me to call Russian Microsoft support service. At Microsoft I was told that if I had purchased Nokia device with pre-installed Windows OS, then all the product key issues should be directed to Nokia (which I already had talked to). Still we also tried to solve the problem by activating Windows 8 by phone, using SLUI 3 and SLUI 4. Nothing of that helped. I also contacted the shop, which delivered the product. They said that they have nothing to do with product keys, since it’s the manufacturer’s responsibility to provide it.
                    And so I still have the tablet with un-activated Windows RT 8.1, which doesn’t allow me to use the device properly. Microsoft applications don’t work.
                    So is there really no way I can get help from Nokia? Where can I obtain my product key? After all I paid money for the device AND the OS it is running.
    Hope for your help. Best regards.
    Sergey Syuzev.

    Odd, normally the recovery image will have the product key embedded. I think however you'd be better off bringing this up with Nokis Support through a more direct channel. This is a user to user platform.
    I guess the easiest and possibly fastest way would be Twitter @NokiaHelps 
    Click on the blue Star Icon below if my advice has helped you or press the 'Accept As Solution' link if I solved your problem..

  • Windows Recovery Failed - Stuck on startup

    I recently tried using hp's windows recovery program to wipe my harddrive and reinstall windows. I am now stuck at start up and am getting an error message that consists of "HP Notebook" as the title, it displays the time and date and "please wait". There is a cancel button that is not selectable. This box appears for approx. 5 seconds and disappears. It then cycles back to the HP startup logo with the circular dots representing that it is working. This cycle is continuous and just keeps on repeating. Booting into bios doesn't even work at this point. Anyone with experience with the issue, advice would be greatly appreciated. Otherwise HP will be getting this laptop sent in for repairs for a THIRD time. (First two were defective hardware issues) This is getting very time consuming and frustrating. Thanks for the help!

    Hi Borck91,
    I saw your post regarding the loop that you are currently stuck in. I know that this can be frustrating but let's see if you can boot into Safe Mode.  If you can boot into Safe Mode, please let me know your operating system and product number. 
    If you can't get into Safe Mode then suggest that you contact HP Total Care at 1-800-474-6836 in North America or visit this link if you are outside North America.
    Thank you,
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • I moved the "stop load" X icon to the left along with the refresh and home icons, after which the X icon disappeared even though the other stayed ok.

    The "stop load" X icon disappeared from my navigation toolbar and I don't see it in the available icons in the customize window to add it back.

    Did you also look at all of your toolbars while in customize?
    You could use the keyboard shortcuts and avoid the problem altogether.
    :see item #4 in
    :Fix Firefox 4.0 toolbar user interface, problems (Make Firefox 4.0 look like 3.6) (#fx4interface)
    : http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface
    " To restore old behavior, use normal customize to fix: (Alt+V → Toolbars → Customize) Separate, move or remove Go [go] ["Enter"], Reload [reload] ["F5"] and Stop [stop]["Esc"] buttons."
    http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface

  • Home sharing icon disappears on PC and Mac

    In my house, we've been using home sharing between a PC (Windows 7), a Mac (OS X 10.8.2), and two iPad 2s with no issues for several months.  It was working as recently as 23 Dec 12. Now, two days later, it is not working on the PC or the Mac, but it is still working on the iPads.  When we turn home sharing on, the home sharing icon shows in the sidebar, but as soon as we put in the login and password and click "Done," the home sharing icon disappears.  The Mac and PC are linked up, as we can see the shared library in the "Finder" on the Mac, but it is inaccessible from iTunes.
    We've tried all the trouble-shooting we can find online, including disabling the IPv6 on the PC, but still nothing.  Any suggestions  to get this working again would be appreciated!

    Rich Rydalch wrote:
    Wannabee;
    Don't give up too soon.
    How do you access the HD from both Mac and PC?
    I do this but only by network not direct hookup.
    If you are plugging the HD into one or the other I may have a solution for you.
    I have all my photos in folders organized the way I want them.
    Then I set iPhoto to NOT import the files when I add them.
    Preferences > Advanced > make sure the selection of "Importing: Copy items to the iPhoto Library" is not selected.
    That way the photos (files) will stay where you put them and the data in iPhoto will still organize and do it's thing on them.
    And if you modify a photo with say Photoshop the new file seems to automatically update in the preview of iPhoto.
    Works great for me.
    Here is what I have been doing...
    1. When I got my MAC, I copied all of my pictures from my PC onto a portable HD (WD passport).
    2. Then I attached it to the MAC and used iPhoto.
    3. I added new photos only to the passport HD and edited them in iPhoto.
    What I was _planning / hoping_ to do is move those photos back to the PC for use in other applcations. But apparently the editted photos aren't on the HD anyway, but on the MAC (in the iPhoto library.)
    But I understand that using a referenced library is not a great idea.
    (Also, initially I did copy some photos into iPhoto and apparently having a both managed AND a referenced set of files is DOUBLY bad!)
    So what I need to do now is fix whatever I "broke" and get a plan to go forward!

  • Can't airplay movies - icon disappears when movie starts in iTunes

    Hi guys. Had this problem for a little while now. I'm running iTunes 11.4 on Windows 8.1 and an Apple TV in another room. I've had no problems until recently. Anything but movies will play perfectly to the Apple TV. But the second I start a movie, the icon disappears, and iTunes starts acting like there's suddenly no Apple TV. Then when I exit the movie the icon reappears as quick as it went. Even for example I would go from streaming music perfectly, straight into playing a movie. Still the same. No amount of restarts or re-installations on both devices has solved the problem yet.

    iTunes prefs > Store.
    Tick Show iTunes in the cloud Purchases.

  • Airplay icon disappears from iTunes when I connect a third idevice

    I own an iPad 2, an iPhone 4 and Iphone 4S. After a clean install of itunes, Airplay works well. When I plug in first 2 devices (no matter which one and in what order), everything works well for several days with several reboots of PC. When I decided to connect the third device, Airplay still works but after rebooting the PC, the icon disappears completely! However I always see my 3 devices in sync by WiFi.
    I made the test twice by changing the order of connections between devices, and the result is the same: Airplay works with 2 connections but no more after the third’s?
    Windows 7 64bits and iTunes is up to date.

    Hello, I have this exact same problem -- Airport Express bought Feb. 2014 (not sure of firmware version?) Windows 8 PC, multiple iPads, iPhones in home. Wireless provider Comcast in S.F. Bay Area (using their Xfinity modem / router) extremely reliable and very fast for 10+ years.
    Every few days Airport Express icon in iTunes on Windows PC turns orange and requires PC reboot. Upon reboot, streaming music works fine. Have also tried all other fixes found on Support forums, etc.
    On iPhone 3GS, iPhone 4S and both iPad 2s Airport Express icon is always available and always seems to work fine.
    Strangely enough, after replacing iPhone 3GS with iPhone 5s (yesterday!), Airport Express was not available on new iPhone, but after quick reboot of Airport Express, new iPhone was able to stream music...
    Windows 8, iTunes, etc. updated w/ latest versions, etc.
    Definitely a pain having to re-boot PC every few days to re-connect to Airport Express...

  • Installation Icon Disappears w/out installing w/out error msg

    64 bit Windows 7 Home Premium SP1 on an ASUS laptop.  First noticed a problem with itunes - saying 'itunes has detected a problem with your audio configuration.'
    I checked youtube on IE9, and the video and audio were fine.  On Chrome however, youtube gave me a msg about needing to install flash player.  Firefox gave me a msg about the plug-in for Shockwave being vulnerable and in need of updating.   I never bothered to check any version numbers and simply uninstalled Flash entirely using the Flash Uninstaller I downloaded from Adobe.
    Now I have no flash player and, although I can run the Flash Installer, nothing ever happens.  If I download the installation executable, and dbl click ite, I get the UAC warning.  Clicking OK makes the icon disappear from my desktop without giving me any error message.
    I have attempted to install by downloading and installing using safe mode with networking and gotten the same result.  I even tried first downloading in normal mode, restarting in safe mode, and installing.  The icon still disappears.
    I'm not sure what I should be looking for in Event Viewer.
    I have run sfc /scannow and no integrity violations were detected 
    I have run a Quick scan with MS Security Essential, and it was clean.  I am currently 7 minutes into a full scan.
    UPDATE
    I saw that a fellow named Mike M replied to another poster just a few hours ago, and his suggetsion was to provide 2 direct install links - 1 for IE and 1 for the other browsers.  The IE install went perfectly, and I can now, once again play youtube videos in IE.  I had less success with the other install.  Firefox 26 gives me an error box about Shockwave not responding, and I can cancel or continue to see if it responds.  Continuing gives me 'An error occurred.  Please try again later'  It is the same video I successfully watched in IE.  Chrome gives me ''The Adobr Flash Player is required for videp playback and provides a link to get the latest Flash Player.  Of course, I thought I had just done that.

    Having Flash Player up to date is one part of the battle. The other is Shockwave. If you do interactive stuff like Facebook games, or Pogo, you need to have Shockwave up to date too.
    I recommend a "full clean install":
    Download the following by right clicking and selecting wither "save target as" (IE) or "Save Link As" (Firefox):
    Flash Player Uninstaller
    Shockwave Player Uninstaller
    Flash Player for ActiveX (Internet Explorer)
    Flash Player Plug-in (All other browsers)
    Shockwave Player 12 FULL Installer (other browsers)
    Note: The following isn't a download, It's a link you'll NEED TO visit with IE to get to the Shockwave Player 12 FULL Intsaller (ActiveX for IE)
    Save five above files to your Downloads folder. DON'T run anything yet.
    Reboot your system completely.
    BEFORE opening anything else, go to your Downloads folder and run the Uninstallers.
    Go to: C/Windows/System32 and delete the Macromed folder.
    Go to: C/Windows/SysWOW64 and delete the Macromed folder.
    Open your Registry Editor (Start>Run or press the Windows key + R and type "regedit" [minus the quotes] then click OK).
    In the Registry Editor, go to: HKEY_LOCAL_MACHINE/SOFTWARE and delete the Macromedia folder.
    Goto: HKEY_CURRENT_USER/Software and delete the other Macromedia folder.
    Close the Registry Editor and empty your Recycle BIn.
    Run the Flash Player ActiveX installer, the Flash Player (other browsers) installer, and the Shockwave FULL installer downloaded previously.
    Then open IE and visit the above link to install the ActiveX FULL shockwave plugin. (Note: it says "11" but it's 12)
    You've no doubt noticed I mentioned NOTHING about Chrome in all of this.
    That's because Chrome uses its own "proprietary" build of Flash Player, and you CAN'T update or reinstall it here.

  • When I open a new window (App etc) the windows already open disappear. How can I fix this ?, When I open a new window (App etc) the windows already open disappear. How can I fix this ?

    When I open a new window (App etc) the windows already open disappear. How can I fix this ?

    Back up all data.
    Please triple-click anywhere in the line below on this page to select it:
    defaults delete com.apple.dock single-app && killall Dock
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window by pressing the key combination command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
    Wait for a new line ending in a dollar sign ($) to appear below what you entered. You can then quit Terminal. Test.

Maybe you are looking for