Re: - WRT54GS Latest Firmware

Well I just wanted to ask which WRT54GS Firmware is the latest 7.0 or 7.2, they both got the same release date so I really dunno which 1 to go for any suggestions ? Thanks
Yours Faithfully, iR0cKtHeBl0cK,
................!Hacking Boss!................

vai_fan wrote:
Well for the router WRT54GS v7 the latest firmware is 7.50.5 & for WRT54GS v7.2 the latest firmware is 7.2.05 & both are the best products so you can prefer anyone of them.
O ic, thanks any way, btw Vai does that mean both are suitable for the WRT54GS and if they are, which 1 do you prefer a bit than the other and why, + Did ya see my other Topic about the Linksys WRVS4400N may you please reply cause I really need to know cause my Autie is in the U.K. Atm, so I really wanna know the right answer so I could reply ASAP. Thanks,
Yours Faithfully, iR0cKtHeBl0cK,
................!Hacking Boss!................

Similar Messages

What's the latest firmware for WRT54G?

For my Linksys WRT54G router, my current firmware is 4.21.1.
When I browse for new firmware (by choosing 4.0 on the drop down menu), it says that I have the latest one. Is this true or am I searching for it wrongly?

dudztgp wrote:
Make sure to select the proper hardware version before the firmware. If your WRT54G is hardware version 4.0, then you have the latest firmware already installed.
Underneath my router it says "Model No: WRT54G ver.2"
And I upgraded my firmware a couple years ago and it is 4.21.1.
Am I fully updated or no?

How can I get the latest firmware for a WRT54GS 7.2? I ac...

How can I get the latest firmware for a WRT54GS 7.2? I accidentally downgraded to 7.2.05, and it came with 7.2.06.

Thank you! I tried that link, it came as a page not found on the Linksys site. I went to the UK version of the Linksys site, and they don't list the 7.2 version of the router. They only go up to 6.0.

Using the latest firmware. My WRT54GS (connected through...

Using the latest firmware. My WRT54GS (connected through a LAN cable) seems to randomely disconnect me from the internet for no apparent reason. For some reason, it can't find the DNS even though my cable modem shows that a connection is there. The only way I can get it working again is unplugging the router, reconnecting the, going into the router status menu and hitting DHCP release, then DHCP renew.
I'm not sure whats causing this though. Any help would be appreciated.

My GSv6 will function perfectly until my cable ISP decides to change my WAN IP address. When they do that the router will drop internet connection and I have to go throught the reboot process for the modem and router. Sometimes this works and all is well again until the next ip change, but other times there are still sporadic outages.

Can't connect to WRT54G after firmware update

I just tried to update the firmware on my WRT54G (version 8.0) and have not been able to connect to the router since then. The firmware said that it had been updated successfully, however I have been unable to connect since it reset itself, and the Ethernet and Internet LEDs are all constantly on even though nothing is connected (the power light on the other hand is behaving normally, not blinking or anything). I have tried resetting the router by holding down the reset button for 30 seconds, but this does not change anything, the router still cannot even be pinged. If anyone can give me any help at all with this, it will be very much appriciated. Thanks.

It sounds like the router might already be dead. But there is always hope that you might be able to revive it.
You need to try again to reset the router to factory defaults.
To reset your router to factory defaults, use the following procedure:
1) Power down all computers, the router, and the modem, and unplug them from the wall.
2) Disconnect all wires from the router.
3) Power up the router and allow it to fully boot (1-2 minutes).
4) Press and hold the reset button for 30 seconds, then release it, then let the router reset and reboot (2-3 minutes).
5) Power down the router.
6) Connect one computer by wire to port 1 on the router (NOT to the internet port).
7) Power up the router and allow it to fully boot (1-2 minutes).
8) Power up the computer (if the computer has a wireless card, make sure it is off).
9) Try to ping the router. To do this, click the "Start" button > All Programs > Accessories > Command Prompt. A black DOS box will appear. Enter the following: "ping 192.168.1.1" (no quotes), and hit the Enter key. You will see 3 or 4 lines that start either with "Reply from ... " or "Request timed out." If you see "Reply from ...", your computer has found your router.
10) Open your browser and point it to 192.168.1.1. This will take you to your router's login page. Leave the user name blank, and in the password field, enter "admin" (with no quotes). This will take you to your router setup page. Note the version number of your firmware (usually listed near upper right corner of screen). Exit your browser.
If you get this far without problems, try the setup disk (or setup the router manually, if you prefer), and see if you can get your router setup and working.
If you cannot get "Reply from ..." in step 9 above, your router is dead.
If you get a reply in step 9, but cannot complete step 10, then either your router is dead or the firmware is corrupt. In this case, use the Linksys tftp.exe program to try to reload your router with the latest firmware. After reloading the firmware, repeat the above procedure starting with step 1.
If you need additional help, please state your ISP, the make and model of your modem, your router's firmware version, and the results of steps 9 and 10. Also, if you get any error messages, copy them exactly and report back.
Please let me know how things turn out for you.

WRT54GS v7 firmware options

Hello everyone
I am using a wireless Linksys wrt54gs v7 and for the past few weeks I have been loosing internet connection on my laptops about once a day to were I have to pull the power on the router to reestablish my connection. This is happening on 2 different laptops so I feel confident that they both don't have bum wireless. I was thinking about reflashing the firmware on it and thought if I was going to do this I would look into some 3rd party firmware. The trouble I am running into is that it appears from what I have been reading is that after version 4 they dropped the flash from 4mb to 2mb which seems to be the stopping point for all the 3rd party firmware. Are there some out there I missed that are worth while to look at or is my only option to stick with the Linksys firmware. It is not a show stopper but I would like to know my options
Thank you in advance for any advice given.

Whats the current firmware version of your router. As of now the latest firmware for WRT54GS v7 is Ver.7.50.5, Which you can download it from the Linksys website, and your can re-flash the firmware of your router again. Once you re-flash the firmware on your router, you need to follow some setps on your router, i think it might solve your problem.
Once you sucessfuly upgraded the firmware on your router,Press and hold the reset button for 60 seconds...Release the reset button...Unplug the power cable from your router, wait for 60 seconds and re-connect the power cable...Now re-configure your router... Here are some settings which you can set on your router to make your wireless connection stable.
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1
Leave username blank & in password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab
-Here select manual configuration...Wireless Network mode should be mixed...
-Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Wireless channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WEP, Encryption should be 64 bits.Leave the passphrase blank, don't type in anything...Under WEP Key 1 type in any 10 numbers please(numbers only and no letters eg: your 10 digit phone number) and click on save settings...Please make a note of WEP Key 1 as this is the Security Key for the Wireless Network...
Click on Advanced Wireless Settings
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
Now see if you can locate your Wireless Network and attempt to connect...

WRT54GS v6 firmware problems...

i just bought my WRT54GS v6 router today. i installed everything the way the directions told me to and everything was working fine until i i tried to install the latest firmware. While the firmware was installing, i got an error about not being able to unpacc language file and the installation stopped right before it was gonna hit 100%. so i shrugged and thought maybe i can try to install it again. well i run the file again and after i put in my password and clicc next so it can upgrade my firmware it now says it cant connect to my router. i can go to my router's webpage but i the firmware cant connect to it. well i shrugged that off knowin that i can upgrade it manually. so i got my routers page and this is how it looks like:
and this is what the admin page looks like after i clicc on it:

gasnyder3 wrote:
Trying to Install WRE54G V3 to existing WRT54GS V6.
According to the WRE help screens, I understand that I need at least 2.07.1 firmware in the router (mine is currently @ 1.50.6)
However, when I go to download the firmware, the latest version available is 1.52.0
What am I not understanding/missing? Thanks, George
P.S> Even though I did download firmware V 1.52, I was not able to 'expand' it as my trial version of Stuffit claimed it could not recognize the file...)
What is the model number plus version of your router?
In your heading you say you have GS ...in your message you say you have a
G router You also say in your message you are upgrading from G V3 to GS
v6
If you have a G router you have to update to the latest G firmware not GS and vis versa

WRT54G v5 firmware that contains service name option?

I noticed there are some firmwares out there for WRT54G routers (maybe different versions 3 or 4 , etc) that do indeed have service name option added.
However, when I update my router to the latest firmware it doesnt have service name option.
Is it possible to add the service name option to version 5 WRT54G routers?
thanks

I don't think so that there is some service name provided with firmware version (either 3 or 4 ) on the linksys website .........the software is only a .bin format file ...........
I will suggest you the router or the firmware version didnot require any service name ..........

WRT54GS New Firmware Old Problems

Hi , I have a WRT54GS v.5 and updated the firmware from its original v1.52.0 to the latest v1.52.2 last week. Since then, the router hangs after 2 days in mixed mode. I first thought it was skype, with all the recent problems, but it wasn't. Eventually, its all access. A search on this problem suggests this is an old problem, resolved a year ago in prior firmware releases. Now I'm wondering if somehow this fix was forgotten in v1.52.2. The kids PSP's dont work set to G, so I have to go back and forth. Before I roll back this firmware upgrade, is anyone else experiencing this problem since installing v1.52.2? Scott

Help...I had this resolved for months....I cant get by a day without my GS going offline. I don't want to buy another $35 Netgear that has so far, run for 6 months....This is frustrating. This router is back to doing the same thing it did when I first bought it...For a while, setting to Wireless G had this resolved...Now its a show stopper, because I switched to Skype for my home phone... I put the router back to factory settings, and rebuilt from scratch with latest firmware. Every 5-6 hours, off the internet it goes. Wireless and LAN ports. My Comcast provided WEBSTAR modem detects a link, and the access lights are going crazy, but can't make anything out of them. I'm wondering if.... Has anyone seen an ISP disable devices running p2p apps? In this case, Comcast wold detect Skype, direct competition to digital voice, and kick my network off. Just guessing here. Please help me...

Latest firmware version

I have a wrt54g v6 can any one tell me what the latest firmware version is?

You can login to http://linksys.com/download .... type the correct Model number .... & choose the correct version ....the latest firmware is ...1.02.2 (7/02/2007)

My macbook pro screen remains grey after latest firmware update

i just had the update notification for the latest firmware, proceeded to do so, and the screen remains grey, its been more than one hour and still grey, since its a firmware update i don't want to disturb it, but could it be that is taking so long?

Reboot it by pressing the power button down hard to force a shutdown.
If your still having problems, take it to Apple. I hope you have AppleCare becuase if they can't fix it, it's a new logicboard.

HT3728 Does factory reset go back to latest firmware update.

I have resently updated my airport express to latest firmware. The airport express is configured as an extension to my wifi with an Extreme as main device.
Shortly after the firmware update (1-2 days) the express stopped working and status light turned yellow.
I have since then tried to do factory reset several times without getting the device up and running again.
When doing factory reset the status light turns yellow after releasing the button and stays amber with short interval with green (1 second every minute or so)
I have not been able to discover the express from my iPad, iPone or iMac again.
Could the reaons be latest firmware update?
Any advice to get it back to normal?
Thanks,
Per

Does factory reset go back to the latest firmware update.
A Factory Default Reset will not affect the installed firmware.
Shortly after the firmware update (1-2 days) the express stopped working and status light turned yellow.
A solid amber light is unfortunately an indication that the internal power supply inside the AirPort Express is failing, or has failed.
I have since then tried to do factory reset several times without getting the device up and running again.
The AirPort Express has failed, and will need to be replaced.
When doing factory reset the status light turns yellow after releasing the button and stays amber with short interval with green (1 second every minute or so)
This is yet another confirmation that the Express has failed, and will need to be replaced.

Internet stopped working on MBA after latest firmware update. Help please!!!

Internet stopped working after installing the latest firmware update. WiFi still connects to router, our other mac desktop still connects to internet as usual (same network). I can't even re-install the MBA OS since it needs an internet connection!!!
Any ideas?

FIXED.
I swapped our wireless router for a newer one, internet seems to work fine again (we were sent a new one by our internet provider which we never set up until now).

Attempted Iphone 4 update to latest firmware update "failed"

Ive attempted to update the Iphone to the latest firmware update and it has failed 3 times, the final time it looked as though
it worked but stopped and went into new mode to go-back to Restore to old setting. Now it is locked up and asking me for the admin backup password
and everything I've tried is not working.. Not sure what to do at this point.
The laptop I'm using is a Panasonic CF29 and running Windows XP with SP3 installed.
I'm open to any ideas at this point.
Thanks Artman

Then it's pretty hopeless. Normally the error message remains displayed until you click "OK", so it's surprising that you didn't see it. You can try the shotgun approach; just try a bunch of stuff in the hopes that it will work. But first I suggest trying to update it again, and this time watch it. The following list covers the most common causes of update failures:
Open a Command window and type the command "netsh winsock reset"
Reboot your computer
Disable your antivirus and firewall
Launch iTunes
Connect the phone using a USB port directly on the computer, not a hub
When the phone is recognized in iTunes click on it, then click Restore
If the phone is NOT recognized in iTunes, disconnect it, the hold the HOME and SLEEP buttons for exactly 10 seconds until the screen goes black, then release SLEEP but continue holding HOME while you connect the cable and continue holding HOME until iTunes recognizes a phone in recovery mode
If the update completes you are in business
You mentioned being prompted for a backup password. If your backup is encrypted you will need to know the password to complete the restore; if you don't know it you will have to restore as New and manually add your content back. If it is encrypted you really did enter a password for it once, whether you remember doing so or not.

Zen Touch latest Firmware Update...player not connec

I tried installing the latest Firmware update for my Zen Touch (released 2-09).
The player is connected and recognized by Windows and the Media Explorer. However, when I try to install the new Firmware it keeps saying "player not connected".
I tried d/l two different language packages cause I wasn't sure what counted - player language or operating system langauge. Anyway, that didn't make a difference.
So what do I do? I have no idea where to start. It's firmware for the correct device connected through Windows XP.
I have made a firmware update before, which worked fine. After that I updated the media explorer software.
Help is very much appreciated! Thank you in advance.
-tina-Message Edited by tinas on 2-0-2005 08:56 PMMessage Edited by tinas on 2-0-2005 09:00 PM

Perhaps it's worth making sure no software is using the player, so reboot the PC, and turn off the Creative Detector. Then try again.
Are you trying to upgrade to the .0.03 version?

Re: - WRT54GS Latest Firmware

Similar Messages

Maybe you are looking for