Re: Z97 gaming 5 uefi windows 8.1 instal now i cant use the bios please help noob

Quote from: Svet on Today at 11:14:35then probably you will unable to figure what's the reason for this
you can contact Zotac support to ask for vbios update for your card which maybe can helps with this

Quote from: Svet on Today at 11:11:48told you, answer with "Y" to any ID errors and to all other flash questions
just flash what you need to flash with regardless what warning you will receive, ignore all of them

Similar Messages

  • Help me i cant install itunes on my windows 7 enterprise i try installing 32bit and it says that i need the 64bit but then in need the 32bit to use the 64bit please help!!!!

    help me i cant install itunes on my windows 7 enterprise i try installing 32bit and it says that i need the 64bit but then in need the 32bit to use the 64bit please help

    Hi there,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    Trouble installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    -Griff W.

  • Z97 GAMING 7: Windows won't install

    I've just built a new machine and am having no luck installing Windows. My basic components:
    Z97 GAMING 7 motherboard
    i7-4790k processor
    32GB Crucial Ballistix RAM
    EVGA GeForce GTX 970 graphics card
    LG WH16NS40 optical drive
    Samsung 840 PRO SSD
    When I boot using my new retail Windows 8.1 disc, all I get is the small blue Windows startup window on the screen; after 20-30 seconds of listening to the disc spin, some little white lights dance in a circle at the bottom of the screen, then the computer restarts and does the whole thing again. That's it -- no welcome screen, no installation instructions, nothing.
    Here's what I've already tried:
    - I've updated the BIOS to the latest version
    - I've switched the drives to different SATA ports
    - I've configured the SATA modes to AHCI
    - I've played with various other settings in the BIOS
    - I've tried both the 64-bit and the 32-bit versions of Windows 8.1
    - I've tried a prior version of Windows (same result but without the blue window and dancing lights)
    - I've confirmed my optical drive and hard drive work fine; I get the same results even when I use other drives
    The BIOS appears to be working perfectly and recognizes all of my components as far as I can tell. The optical drive is obviously reading information from the Windows disc, since I'm at least getting a Windows icon. This is my second build, and I had zero issues with my first one, so I'm reasonably confident I've connected everything properly (though I'm certainly capable of mistakes). I'm now at a loss.
    Any suggestions would be most appreciated; I'm happy to answer any other questions about the machine or what I've done so far. Thanks!

    Hi,
    I can see you have a BluRay optical drive. Are you able to use standard DVD drive (which doesn't support BluRay) ?
    What is your PSU?
    Try without graphics card and use only integrated GPU.
    Also see if it would try to install with single RAM stick.
    Also you could try this (again):
    Disconnect all drives but have your SSD and optical drive connected (if you have more than these 2)
    >>Clear CMOS Guide<<
    Go into BIOS, set optical drive as #1, SSD as #2.
    Reboot with the installation disc inside the drive
    It most likely will ask you if you want to boot from optical drive blah blah then spam couple of different buttons.
    See if boots/tries to install

  • Windows 7 64 Bit install on Imac 2010 Using Boot Camp PLease Help

    OK so I am trying to install my 64 bit windows 7 using bootcamp on my imac 2010 i just bought it today. I have created the partition and the computer restarted and went to windows 7 setup however it then told me it could not find any drivers for the cd/dvd. I think the drivers on the OS X cd but i cant eject the windows 7 cd to put the OS X cd in because I am in windows 7 setup and the eject button wont work. Does anyone have any suggestions on how to proceed? I would Really appreciate it thank you.

    It sounds that the Microsoft Installer does not like the optical drive inside of your Mac.
    Do you have access to an external DVD drive?
    If yes, try the Windows 7 install with an external DVD drive.
    If no, try to install Windows 7 from a USB drive.
    Source 1:
    http://technet.microsoft.com/en-us/magazine/dd535816.aspx
    Source 2:
    http://social.technet.microsoft.com/wiki/contents/articles/how-to-deploy-windows -7-from-a-usb-drive.aspx
    If you don't have an external DVD drive or a USB drive that is 8GB or larger, you might want to consider borrowing or buying one.

  • I had Apple Ibook G4. I had replaced the HDD but thnot able to install the mac os becoz its dvd drive is faulty I dont want to expend onthat stuff but want to use the same Please help me regarding the installation procedure of mac os

    help

    You cannot install OS X without using an installer DVD, and that requires a DVD drive (internal or external.) Alternatively, if you have access to another Mac and if both have Firewire ports, then you can use Target Disk Mode: Transferring files between two computers using FireWire.
    Your profile indicates you have a MacBook, but are using OS X 10.3.x which is not possible. The first MacBook model used a special Intel-only version of Tiger, 10.4.x.

  • Error: Windows Cannot Be Installed to This Disk. The Selected Disk Has an MBR Partition Table.

    Error: Windows Cannot Be Installed to This Disk. The Selected Disk Has an MBR Partition Table.
    Error: Windows Cannot Be Installed to This Disk. The Selected Disk Has an MBR Partition Table. On EFI Systems, Windows Can Only Be Installed to GPT.
    I found one solution to this problem on hp forum but my laptop has boot legacy and does not disable the efi boot order.
    HP Model# HP 1000-1140TU Notebook PC
    Serial# 5cg2481dbg
    Product# c8c94pa#uuf
    This is solution which is found on hp forum
    SolutionThe resolution to this issue depends on the the hard disk volume size:
    Follow these steps if the hard disk volume size is less than 2.19 TB:
    Temporarily disable the EFI Boot Sources setting in the BIOS:
    Restart the computer, and then press F10 to enter the BIOS.
    Navigate to Storage > Boot Order , and then disable the EFI Boot Sources .
    Select File > Save Changes > Exit .
    Install the Windows operating system.
    Enable the EFI Boot Sources setting in the BIOS:
    Restart the computer, and then press F10 to enter the BIOS.
    Navigate to Storage > Boot Order , and then enable the EFI Boot Sources .
    Select File > Save Changes > Exit .
    Follow these steps if the hard disk volume size is greater than 2.19 TB:
    Install the HP BIOS Update UEFI utility from the HP Web site:
    Click here to access the document "HP BIOS Update UEFI" .
    NOTE:The HP BIOS Update UEFI utility is installed by default on some HP computers.
    Follow the steps in the Microsoft document titled "How to Configure UEFI/GPT-Based Hard Drive Partitions" (in English) to create a GPT partition.
    Click here to access the document "How to Configure UEFI/GPT-Based Hard Drive Partitions" .
    NOTEne or more of the links above will take you outside the Hewlett-Packard Web site. HP does not control and is not responsible for information outside the HP Web site.

    I am having the same problem. Windows is trying to install. It identifies the various partitions but says that I cannot install Windows on the Boot Camp partition or any other. I select Drive options (advanced) and Format the Boot Camp drive, but it makes no difference.
    This is the Windows error:
    Windows cannot be installed to this disk. The selected disk has an MBR partition table. On EFI systems, Windows can only be installed to GPT disks.
    Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer BIOS menu.
    I am not sure what Csound1 is suggesting with that post above. There are some involved suggestions over here <https://discussions.apple.com/message/23548999#23548999> about using Disk Utility to delete the Boot Camp partition and create new ones - is that the idea?

  • Windows XP Clean Install – What I discovered and the help I need

    Windows XP Clean Install – What I discovered and the help I need
    I previously had a problem with my Laptop dying randomly you can read about it in the thread entitled Computer dies Randomly (Battery also dead) click to view
    Before I realised the solutions, I thought that maybe my Laptop had become infected with a Virus and decided it would be prudent to do a clean install of the Windows XP operating system.
    Everything went perfectly and thought a clean install was a good opportunity to download the “XP Service Pack 3” SP3 and did so, it seemed very quiet though and that’s when I realised I had no sound…
    I downloaded all of the sound drivers I could find on the Lenovo site for 3000 N100 (I knew from previous experience that the “SOUNDMAX” driver is the only one that actually works with this 3000 N100) in order to install this you have to install the Realtek HD audio driver, but in order to install that you have to install some other Driver/Soft that only works with SP1 or SP2 if you try to install it with SP3 it will say that you don’t need the file as your Service pack is newer than the file you want to install, this is understandable as SP3 is not final as of yet (but it’s good to know).
    My next problem was that my extra RAM was not detected, this was fixed by updating the BIOS, after installing all of the System updates, PC Doctor, everything I could find for 3000 N100 I decided to rest, I pushed the Lenovo care button and it did not work, I found a hot key driver and installed it but still the Lenovo care button does not work, previously when I pushed this button it would bring up the Lenovo menu but now it’s just a dead button, Does anyone know how to get this button working again?
    I am pretty sure that everything else is working fine now, just that button not working is very annoying, is there a set routing of installs you must do to get everything working, i.e. bios 1st audio 2nd system update 3rd etc...
    Please help, I hope I have helped you...
    Message Edited by DrunkenNinja on 05-07-2008 03:38 AM
    Message Edited by DrunkenNinja on 05-07-2008 03:38 AM
    Solved!
    Go to Solution.

    Ok first everything works now... except the Lenovo Care button, I just posted the other stuff cause it might help other members,  I have searched the forum for an anwser to this problem but there was only one anwser (suggesting to uninstall the driver restart and re-install it) and it did not result in a working Lenovo Care button...
    I don't beleive the Lenovo keyboad drivers are in any way related to the Service pack 3 as they do not use the Service pack files, to back this up I also had the same problem when Service Pack 2 was installed...
    The Lenovo Care button works fine on Boot up screen to access the rescue and recovery software (So the mechanics of the button are fine) but once Windows XP loads it is just a dead button, I remember it used to open up the Lenovo Care Start bar, I got it working once in the past but I can't remember what I did, I thought someone here might know the anwser...

  • "Windows cannot be installed to this disk. The selected disk has an MBR partition table. On EFI systems, windows can only be installed to GPT disks." Error

    Hey Im getting the following error when trying to install windows from a USB. 
    "Windows cannot be installed to this disk. The selected disk has an MBR partition table. On EFI systems, windows can only be installed to GPT disks."
    I installed the windows 8 (64bit) iso using boot camp to a usb.  I was able to do this after changing the info.plist to allow me to place the iso on the usb.  After I make the partition and start the install, I get the above error.  I formatted the partition in the installation but I keep getting this error.  I've repreated the entire process but i keep getting this errror and the disk utility says my partition is a Windows NT File System (NTFS) so im not sure what's going on.  If you can help me that would be greatly appreciated

    I am having the same problem. Windows is trying to install. It identifies the various partitions but says that I cannot install Windows on the Boot Camp partition or any other. I select Drive options (advanced) and Format the Boot Camp drive, but it makes no difference.
    This is the Windows error:
    Windows cannot be installed to this disk. The selected disk has an MBR partition table. On EFI systems, Windows can only be installed to GPT disks.
    Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer BIOS menu.
    I am not sure what Csound1 is suggesting with that post above. There are some involved suggestions over here <https://discussions.apple.com/message/23548999#23548999> about using Disk Utility to delete the Boot Camp partition and create new ones - is that the idea?

  • I need to install windows 7 on my iMac. I used the bootcamp assistant to partition the drive (101Gb). My bootcamp partition, when I am to choose a partitian, was deleted (by an instructor) I think I might need to repartition my hard drive. What do I do?

    I need to install windows 7 on my iMac. I used the bootcamp assistant to partition the drive (101Gb). My bootcamp partition, when I am to choose a partitian, was deleted (by an instructor) I think I might need to repartition my hard drive but I am not sure. What do I do? I haven't ruined my iMac have I?

    Help! I can't do my college homework if I can't run windows on my iMac! (school is on windows, limited access to the library)

  • Installed windows 7 64 bit on my macbook .. but now got my macbook without audio. please help me!

    Installed windows 7 64 bit on my macbook .. but now got my macbook without audio. please help me!

    You most likely installed Windows 7 in EFI mode. Can you confirm this?
    If you used Bootcamp Assistant to partition your drive, you did not install in EFI mode.
    If you selected "EFI Boot" at the boot menu before installing Windows, you started the EFI Boot installer.
    Please let us know whether or not you installed in EFI mode because audio not working is a common problem in EFI mode, but should not appear in normal BIOS mode. (Normal BIOS mode is when you used Bootcamp assistant)

  • Capitvate 8 for 64bit windows downloaded, but "install now" button in akamai downloader has no effect. How to install?

    Capitvate 8 for 64bit windows downloaded, but "install now" button in akamai downloader has no effect. How to install?

    check your computer or, if you don't know how to search for files, redownlload:
    Downloadable installation files available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 |12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7
    Lightroom:  5.7.1| 5 | 4 | 3 | 2.7(win),2.7(mac)
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
    window using the Lightroom 3 link to see those 'Important Instructions'.

  • I have been trying to download the newest itunes to my windows 7 computer wit the last 2 wks now... im at the stage where iv tried everting from uninstalling itunes to installing it again... can someone please help be4 i throw the computer out the window!

    i have been trying to download the newest itunes to my windows 7 computer wit the last 2 wks now... im at the stage where iv tried everting from uninstalling itunes to installing it again... can someone please help before i throw the computer out the window!

    Here is what worked for me:
      My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

  • Installing a New Windows Server 2008 R2 Child Domain by Using the Command Line

    Installing a New Windows Server 2008 R2 Child Domain by Using the Command Line:
    http://technet.microsoft.com/en-us/library/cc731873%28v=ws.10%29.aspx
    dcpromo /unattend /InstallDns:yes /ParentDomainDNSName:mysite.com /replicaOrNewDomain:domain /newDomain:child /newDomainDnsName:gridview.mysite.com /childName:gridview /DomainNetbiosName:gridview
    /databasePath:"c:\Windows\ntds" /logPath:"c:\Windows\ntds" /sysvolpath:"c:\Windows\SYSVOL" /safeModeAdminPassword:pass1 /forestLevel:4 /domainLevel:4 /rebootOnCompletion:yes
    Error Code:
    The specific argument 'childName' is not recognized.
    I am trying to insert gridview as a childname.

    Hi,
    Before going further, can we try another domain name to see what will happen?
    Besides, if the issue persists, we can try installing a new child domain by using the GUI.
    Installing a New Child Domain by Using the Graphical User Interface (GUI)
    http://technet.microsoft.com/en-us/library/cc771856(v=ws.10).aspx
    Best regards,
    Frank Shen

  • I have installed flash player on my hp laptop windows 7 i am playing games but then all off a sudden it tells me that flash player is not found 11.3.0 version is required but i have this already installed now i cant play my games

    i have installed flash player on my hp laptop windows 7 i am playing games but then all off a sudden it tells me that flash player is not found 11.3.0 version is required but i have this already installed now i cant play my games. I have uninstalled and reinstalled it but it still not working please can any one help.

    MatchingNode
    YOUR SYSTEM INFORMATION
    Your Flash Version
    17.0.0.134
    Your browser name
    Internet Explorer
    Your Operating System (OS)
    Windows (Windows 7)
    I cant take a screen shot of the flash player update tab as it wont let me and wont let me copy and paste sorry
    i am using internet explore browser and trying to play facebook games thats where i am facing the issues.

  • Installed new update on my windows 7 laptop. Now I tunes does not work! Help!

    Installed new update on my windows 7 laptop. Now I tunes does not work! Help!

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

Maybe you are looking for