Re: z97a Gaming 7 BIOS corrupt after Live Update

THANKS!

QuoteOops, sorry, I forgot to check the whole name of the BIOS of BIOS B but it was version 1.19.
you mean 1.9
QuoteYay! Clearing CMO...

Similar Messages

MOVED: Bios destroyed after live update pm8pm-v (MS-7222) Help Needed!

This topic has been moved to BIOS.
https://forum-en.msi.com/index.php?topic=116995.0

Quote from: Bas on 26-April-11, 18:05:06
The last BIOS I can find is this one: http://download2.msi.com/files/downloads/bos_exe/7222v53.zip
Thanks!
Quote from: Bas on 26-April-11, 18:05:06
But I doubt it will solve anything.
And, unfortunately, I'm not expecting it will fix anything either. But I'm eliminating as many possibilities as as I can.
Quote from: Bas on 26-April-11, 18:05:06
Are you sure your hang isn't due to a bad harddisk?
Or overheating CPU?
I'm reasonably confident that it is not a bad hard disk. All of the hard disks I have have been running in a stable manner at different times off the mainboard SATA connections. The thing that has changed is the SIL 3114 SATA Card.
The overheating CPU I can't be so sure about. However, the CPU has run just fine under much more taxing conditions in the past. I think my problem is likely to be that the SATA Card is useless.
I just can't seem to find any clues to help diagnose the problem...

Z77A-G43 login loop after Live update BIOS to V25.1

Hi,
Z77A-G43 windows login loop after Live update BIOS to V25.1
I'm able to see the BIOS menu. But when i continue to login to windows, it loops.
i would like to know on how to proceed on this. I tried safemode and i was able to login.
I cannot find the clear cmos jumper on this board.
Appreciate your response on this one. Thanks!
edit: I just tried removing the board battery. But still encountering the same issue.
-Paul

There is no such BIOS version for this board.
The last BIOS is v2.11 see here http://www.msi.com/product/mb/Z77A-G43.html#/?div=BIOS
As for the CMOS jumper. This must be the most stupid saving that MSI has ever done. They leave out the jumper, obviously in an effort to save costs.
Check your manual to find the location of the clear CMOS pins. Then you need to short these with a jumper from somewhere else or use a metal object to connect the pins.

K8T Neo Fir won't post after live update to 2.0 bios

After running the Live Update which updated the bios to 2.0, I can't boot into XP (SP 1). I can boot in safe mode. Not sure how to get this running again. I've tried everything I can think of, any ideas on what I might try?
Setup was running fine prior to bios update.
XP SP 1
K8T Neo Fir
1 GB
Promise Sata Raid 1 - 2 80GB Sata drives
Radeon 9600

I tried executing "fixboot" from the recovery console but this may have made things worse. After running this successfully, the console reported that it had written a new boot vloc on teh C partition in FAT32. The SATA drives are not formatted in FAT32! Now I don't get the Windows initial screen at all, it just goes back to the bios and restarts. I can still startup in safe mode though.
Maybe the Recovery Console can't see the drives properly because the Promise drivers are not loaded? Any ideas? I'm in deep now!

Cannot Post After Live Update of BIOS

System: MSI K8NGM2-FID, 4 gig Corsair, AMD 4400 X2, EVGA 7800GT, 4 Seagate 160 SATA II drives in RAID 0, HP 740vi, Sony floppy, CoolerMaster 810 Stacker case, PS Power & Cooling Turbo 510/SLI.
I just assembled the system. It POSTed fine. I installed Windows XP (SP 2), NAV 2006, Linksys USB network card, MSI LiveUpdate. I updated the BIOS 3.0 to 3.1 using Windows through the Live Update and making a rescue disk. Nothing remarkable about the update. System will not POST i.e. nothing shows up on the screen although the lights on the Corsair memory go through the appropriate cycle and the keyboard lights shine as usual. Attempted to restore from rescue—can get the disk read using control home: still no POST. Same result after using the BIOS reset switch on the board.
I get no automated to my message to MSI online tech support.
What can I do?

try shutting off, disconnecting the power cord, removing the CMOS battery, tap the power button a few times to discharge any residual power, then leave the battery out for a couple of minutes, before refitting it, then reconnect the power cable, power back on, enter BIOS setup and re-enter BIOS settings

945p neo3 Problem after live update bios

Hi,
After I made the update trought live update, my computer doesn't start, I don't know what to do?
When I restarted it only shows the logo, if I hit DEL or TAB keys it shows to the start of the boot but it freezes.
I already clear the cmos, did anything that i had found on this forum, but nothing works.
I don't have the chance of doing anything because it won't gets the part to enter in bios.
It only appears in the screen thre lines:
AMIBIOS 2005.....
MSI 945PL Neo A7236IMS V1.9 Date: 08/07/06 08:05:52
Intel(R) Core(TM)2 CPU 6400 @ 2.13 GHz , Speed:
and nothing else appears.
One of the things that is very strange is if my board is a 945p neo3 why it happears 945 pl neo, did the live update flash my motherboard with a wrong bios version????
is what it looks.
Any ideas to fix this, if there is a fix?
I don't see anything, because the motherboard don't even reaches the process of boot, so I can't try to flash a other version of bios because the process never reaches the time to boot from floppy, usb, disk..
HELP PLEASE,
Thanks in advance,
Nuno

"Thanks for the ISO File, everything is now correct, the problem with the memory was related with checksum, now happears the 4096 MB."
Nope they was 2 separate problems, solved with one hit.
"About I couln't start your application, whith the historial of your application and antivirus that I saw on the post about it, i got suspecious right away of my antivirus solution.
So to help, I uninstall and after that i could run it, I use Symantec Endpoint Proctection, is the corporate solution from symantec that is replacing the old one known as SAV - Symantec Antivirus Corporate Edition. I didn't find any message in the logs of it, but the fact is that if I have this solution installed I could not run USB tool, if I Uninstall I could run it."
Probably same resource conflict with your AV (some kind of system restriction) which cause Tool unable to proceed properly and terminating itself.
Can't duplicate your issue. I was using SAV - Symantec Antivirus Corporate Edition(Up to date) till now and Tool perform well,
Just installed and updated Symantec Endpoint Protection (Updated to latest definition with all protection activated) and the Tool perform well as expected too.
"now happears the 4096 MB"
Nice

870A-G54 Black screen after Live Update bios

Hi everybody,
My computeur works fine since 3years, I change nothing inside, I just want to upgrade all drivers and bios because sometimes the computeur was freezing without any reason....
So...I installed live update...Live update processed to the flash of the bios to the latest version, everything was ok, auto-reboot and.... black screen !!!!
Visually all is fine : led on, fan ok, fan of the video card too, hard drive is launching but nothing in the screen.
I already read all the post about the same problem, I try to reset the bios by unplugging the cord of the psu and move the jumper : nothing...
I change the video card : nothing more...
When I unplugged all the ram I heard 3 bips, and when 1 or more dimm present there is no bip.
I know there is a problem with this fu***** bios update but can you have an idea for my problem and help me ???!!!
Thanks.

Quote from: Svet on 26-October-13, 22:51:04
try again clear cmos, >>Clear CMOS Guide<<
...I follow multiple times this guide...again and again the same problem...an onother idea boss ?

P67a-gd53 wont boot after live update

my computors been fine for the last 12 months but for some daft reason i downloaded live update 5 last night and set it off
today the computor was on when i came to it (after i turned it off last night)
blank screen
i pressed reset and it started looping initial boot
comes on 2 beeps waits a few seconds fans running and shuts off
few seconds later and it repeats
comes on 2 beeps waits a few seconds fans running and shuts off
all 6 aps leds are on during the boot
im guessing something in the live update has killed my motherboard?

Try pulling the PSU power cord, removing the battery for awhile, clear CMOS. If it will then get to the UEFI/BIOS screen, reset and see how it goes. If the OS was loaded under AHCI, be sure to remember to set the SATA controller mode again and also set the correct boot order.
Added: And remove Live Update from your computer.

BIG PROBLEM after Live Update installed

I installed the live update and now my system has crashed!
During my initial set up of this system I was having overheating issues. I stopped this by selecting the Advanced preset setting in the BIOS.
Well after installing the Live update the system restarted and installed the recommended updates for the mobo. I once again restarted the system only to have it shut doen within 30 - 40 seconds (never even got Windows to completely boot). I tried several times with the same outcome. I then remembered the over heating issue I had during the build. I looked back here to see how I solved the problem. I tried to preform the same steps I took earlier (going into BIOS and setting the advanced preset) each time being shut down before being able to accomplish the task. I am now left with a stone cold quiet system! I get the power switch to light up on the case and 2 of the LED's on the board turm blue. I have tried the mobo power button and the reset button with no luck!
Thoughts?

Quote from: Svet on 11-June-10, 22:01:34
Why you didn't tell this until now?
You tell that you've installed Live Update, not mention that you've proceed with BIOS update too...
Repeat again >>Clear CMOS Guide<< with power cord removed,
and leave 1 memory stick in 1st dimm, then try to boot
My apologies, you are correct. In the Live updates, BIOS was among the items to be updated.
I already tried the clear CMOS excatly as indicated in the link/video.

How to update VGA bios in MSI live update.

Hi,
I downloaded MSI live update and i saw that there is a new bios for my card and i downloaded it.
when i go to the folder with the DL-FILE i see that different things are downloaded included nvflash and the rom itself.
Now is my question, can i install the new bios though the MSIsetup in that folder or do i have to do it a different way? I just want to be sure because i don't want to do anything wrong and probably brick my card.
Thnx in advance.

I just flashed the new vbios via MSI live update yesterday, but I have GTX 970, not sure if the procedure is the same or not between different cards.
I just pressed the "download and install" arrow on the right side of vbios size, and live update only allowing me to choose vbios update at one time. After the download finished, it auto executed cmd under windows, and remind me to remove graphics card driver and continue (I did uninstall when I flashing my first card, but for the next one I just closed the nvidia experience), after press twice "Y" in the cmd, the flash began and then system just auto restarted. When my pc rebooted to windows again, I checked the vbios version, it appears the new one.
maybe i should film a video if i got chance

Office 2013 (Word, Outlook, Excel, Power point) are not responding after live update

I had problems all last week with my Office applications not responding. I tried to uninstall and reinstall the software which did not solve the problem. I then did a samsung 5 recovery to factory state and installed office all over again which temporally
worked. My computer then prompted a windows live update after which the same problem came back with windows application not responding.
Please help as this is holding up my work.

Hi,
Please check your update patch list, if you had installed the Office 2013 SP1. please try to update the display card dirve. See the below thread:
http://social.technet.microsoft.com/Forums/en-US/34401d63-6c3b-47e6-ab20-9ed9b70d890b/outlook-2013-sp1-unusable-since-sp1-update-?forum=officesetupdep
Regards,
George Zhao
TechNet Community Support

Trying to recover my data My Micro SD Card became corrupted after JB Update

Can someone please help me?
Here is the issue:
Background:
I have a Samsung Galaxy S3 phone that I transferred my micro SD Card into from my previous smart phone. About a month ago I realized that some of the pictures were corrupted and called verizon they told me to put the sd card in the old phone and see if I could delete the corrupted pictures. Did that, the card went back to working as I was used to it working. I then had a friend download some music to it. That also worked fine until verizon sent out the Jelly bean update. When the phone turned off and then back on after the update, the phone gave me an error message that said the SD card is damaged. I immediately took it out of the phone and put it aside.
Current issue:
So today I purchased a card reader, New micro SD card and came home and downloaded Recuva. So far everything is great. All the files, I card about came up in the directory with little green circles next to them. (All the music and my 5 sms back-ups) I then hit the recover icon at the bottom of the screen and the data gathered. Then it never recovered over to my c drive or to the flash drive (memory stick) that that I put into one of the other ports. I keep getting 1 or 2 messages. The one I am seeing the most is " The parameter is incorrect" the other one I am seeing is that the memory is not ready for the data. I am now at the point where all I care about are the 5 sms back ups. The music can be reloaded later. files are called sms-"date backed up and a string of numbers".xml
So question is do I need to buy recuva to actually recover my data or am I doing something else wrong? Please help.
Thanks so much in advance.
So an update as of 8:45 pm
So here's what else I have tried so far tonight. I went back into the CMD mode of my computer and ran chkdsk d:/f   this now produced a name of a file that is corrupted. Also says that it removed the file. I then ran chkdsk again with the exact same result. The file was not removed.
Running recuva I am getting more files recovered now and more green circles. But, when actually trying to recover the files I am still getting the message "The parameter is incorrect"
Most of the other software i have found is either for recovering pictures or deleted files not corrupted ones. This is the only software that appears to do what i need it to do for my issue. I think I may be in over my head and it may be time to pay a professional to move on from here. Any thoughts would be greatly appreciated.
Thanks again for taking your time to reply to me.
Message was edited by: Dayna Pachman

There are some free alternatives to recovering files from a SDcard. photorec.exe is one. Try a Google search to find others.

Nano corrupted after ipod update

i was trying to update an ipod nano, and the updater froze following the update, but the update bar on the ipod continued to function and it seemed like the update completed since the ipod restarted after the update bar finished, so just task managered out of apple updater.
Well now, neither itunes nor ipod updater (the most recent verions) recognize the ipod, and when i try to access it as a disk drive, i get an error message saying that the drive is corrupt. I'm trying to restore to factory settings, but i can't do that if the updater itself doesn't recogize the ipod.
What am i supposed to do?

Hi,
I had to solve the same trouble: After interrupted update on my iPod nano , the Windows explorer (several functions on the "My Computer" button, including right mouse click) hangs up. Trying to restore the iPod, the iPod updater program hangs up.
After reading the previous recommendation ("just format it!"), I formatted my iPod SUCCESSFULLY, on the following way:
1) Restart your PC with disconnected iPod.
2) Connect your ill-humoured iPod to USB slot.
3) You should see the connected external drive in my computer. DON'T CLICK ON IT! Just note the assigned drive letter, for example "E:".
4) Start the MS-DOS-like command line interpreter (Start menu -> Run... -> keyboard input "cmd + <Enter>").
5) Start the command line operation "format E:" (substitute "E:" with your correct drive letter) and confirm all instructions with <Enter>.
BE CAREFULLY, OF COURSE: If you perform "format [drive letter]:" via command line on any wrong volume, you will loss all data stored on this volume.

MSI GT683 graphics slow after Live Updater

Hi there, in a moment of boredom I installed the MSI Live Updater and allowed it to update the Intel Chipset driver and I think a usb driver. Since doing so I have had a steep drop in FPS. I've subsiquently updated the video drivers to the latest but its made no difference. Has anyone else had this issue or have any suggestions? Perhaps it's changed a setting? Is it possible to revert to the previous drivers without rebuilding?
Thank you

If you have reason to believe that the repair center did not repair or diagnose the laptop properly, then you have the full right to claim the repair under warranty even when Warranty is expired, up to 6 years after Purchase in Europe. The issue however is, that 6 months after purchase the burden of proof lies with the buyer.
In other words, if you can proof that the problem with your laptop is not caused by you(mishandling, user error, etc) then the retailer has to take it in for repair under warranty.
So the question is, have you been using the laptop on surfaces that it is not intended for? IN example, are you using the laptop on your bed, your lap etc while its venting and heating ports are closed off? Thus not allowing any fresh air to come in?
Have you meddled with the fan speeds of the laptop?
Edit : Take in mind though that this EU directive is very hard to proof and stores, unless you literally press them with a copy of said directive, will try to get out of it and even if you show them directive they may still opt to go with the countries sales of goods act.
edit 2 : The directive in question is 1999/44/EC.

Need bios w7030nms.914 live update crashed my board

live update crashed my board . I have a k8n neo v2.0 ms-7030 v3.0 the bios chip has w7030nms.900. From what I have read I need w7030nms.914 to flash the board. Ser# 402 6527759895. Any help would be appreciated.

First thank you for your help, downloaded and made the disc booted up and now i get Warning! system is not new AWARD BIOS version! Please updata ROM BIOS first.... then at the bottom it says to input the file name. I put in w7030nms.900 and nothing. What am I doing wrong?

Re: z97a Gaming 7 BIOS corrupt after Live Update

Similar Messages

Maybe you are looking for