RE1000 not found by MacPro under Yosemite

Hello!I have an iMac and a MacPro Yosemite.
I am trying to setup 2 RE1000 that I had put aside because they did no longer respond although they worked fine when I set them up 2 years ago before I upgraded to Mavericks and then Yosemite.
I tried to upgrade the RE1000 to v1.5 and v2.0 with no result.
Do I have to wait for a new RE1000 Yosemite compatible version?
Thanks a lot
Miguel

  Hi there, couceiro. I guess you were using the setup disc in installing the devices again. I suggest that you manually configure the range extenders. I have checked their website, but they do not have the updated version of the setup software that will work with Yosemite yet. 

Similar Messages

  • Service Tax Registration Number field not found in FD01 under CIN Details

    Hi Experts,
    I am using R3 - ECC5
    T Code - FK01 / FK02 / FK03.
    Can you guys tell me
    1. I am not able to view the field "Service Tax Registration Number" under the "Sales Tax Tab" in customer master. Can you tell me how to populate the "Service Tax registration number" field under - Customer Master - Additional details - CIN Details - SalesTax.
    2. Also in one System the above Tab name is "Sales Tax/Service Tax" where I am able to also view the "Service Tax Registration Number" field. But in the R3 System where I am not able to view the "Service Tax Registration Number" Field the Tab name is just "Sales Tax". Can you tell me how to change this Tab Name to "Sales Tax / Service Tax".
    Rgds
    Prasad

    Hi Experts,
    I am using R3 - ECC5
    T Code - FK01 / FK02 / FK03.
    Can you guys tell me
    1. I am not able to view the field "Service Tax Registration Number" under the "Sales Tax Tab" in customer master. Can you tell me how to populate the "Service Tax registration number" field under - Customer Master - Additional details - CIN Details - SalesTax.
    2. Also in one System the above Tab name is "Sales Tax/Service Tax" where I am able to also view the "Service Tax Registration Number" field. But in the R3 System where I am not able to view the "Service Tax Registration Number" Field the Tab name is just "Sales Tax". Can you tell me how to change this Tab Name to "Sales Tax / Service Tax".
    Hi Problem has not been resolved. Can anyone give some solution.
    Rgds
    Prasad

  • Service Tax Registration Number field not found in FK01 under CIN TAB

    Hi Experts,
    I am not able to find the Service Tax Registration Number field in Vendor Master (FK01/ FK02 / FK03) under CIN Details Tab - under Sales Tax Tab.
    We are using ECC5. Also we have checked in another ECC 5 system where we are getting the Service Tax Registration Number field in Vendor Master - under CIN Details Tab - under Sales Tax/Service Tax Tab.
    Can you please tell me:
    1. How to populate this "Service Tax Registration Number" Tab in Vendor Master. We want to add the Service Tax Regn Number, of all our Vendors, in the Master.
    2. Also can you tell me why in, "FK01 - under CIN Details Tab" in one system, the Tab Name is Sales Tax, while on another system the Tab Name is "Sales Tax/Serivce Tax". Is there any way by which the Tab Name in our system can be changed to "Sales Tax/Service Tax.
    Regards,
    Prasad

    Hi Experts,
    I am not able to find the Service Tax Registration Number field in Vendor Master (FK01/ FK02 / FK03) under CIN Details Tab - under Sales Tax Tab.
    We are using ECC5. Also we have checked in another ECC 5 system where we are getting the Service Tax Registration Number field in Vendor Master - under CIN Details Tab - under Sales Tax/Service Tax Tab.
    Can you please tell me:
    1. How to populate this "Service Tax Registration Number" Tab in Vendor Master. We want to add the Service Tax Regn Number, of all our Vendors, in the Master.
    2. Also can you tell me why in, "FK01 - under CIN Details Tab" in one system, the Tab Name is Sales Tax, while on another system the Tab Name is "Sales Tax/Serivce Tax". Is there any way by which the Tab Name in our system can be changed to "Sales Tax/Service Tax.
    My Problem has not been resolved. Can anyone give some solution.
    Regards,
    Prasad

  • Crucial MX200 not recognized in MacPro with Yosemite

    Hello I just installed a Crucial MX200 inside a 2009 MacPro, using a newertech Adaptadrive adapter. The disk doesn't show up in disk utility...
    Any particular procedure I need to follow to get it recognized?   ThanksAlex 

     Are you saying that you are not running Trim at all? What version of OS X ? Have you done a firmware upgrade to MU02 on the MX200 which has a number of major bug fixes? I would be interested to see if benchmark figures for the MX200 have improved.   

  • Cs5.5 embedded youtube is blank in Safari, in firefox "file not found"

    Dear all,
    I embedded youtube and vimeo videos in a website in dreamweaver 5.5, in Safari the space is blank, firexfox gives me "file not found - the files under /embed/(embed code) could not be found.
    An older file with embedded youtube works perfectly, but if I put in a new embedded video in this file, same phenomenon - blank in Safari. Since I have not embedded videos for a couple of months I cannot relate this behaviour to any update I made.
    I have the last version of dreamweaver cs 5.5. Yesterday I updated Safari, MacOSX 10.7.5., Java, emptied cache/cookies, reset Safari, and put Safari to 32bit mode. Nothing changed.
    Thanks for looking.
    Tobias

    Did you upload the video files to your server?
    The message "file not found" can mean a number of things...
         1. The video files were not uploaded
         2. The video files were uploaded, but to the wrong location (placed in wrong folder)
         3. The links to the videos are pointing to the wrong locations (maybe your hard drive instead of the server)
         4. Your html page is cached by the browser with outdated links (refresh your browser cache)
    Without seeing the page in question, it's all guesswork. Could you post a link to your page so we can take a look?

  • After Yosemite install Symantec AV LiveUpdate won't run citing Java RTE not found error even after install of Java 8 Update 25

    I just installed Yosemite.  When I attempted to run Symantec Anti-Virus LiveUpdate (which worked fine under Mavericks) I got an error message stating "LiveUpdate was cancelled because Java Runtime was not found. Please run LiveUpdate once Java has been installed. For your convenience we will try to install Java using Apple Software Update."  Accordingly, I went to the Java website, downloaded and installed Java 8 Update 25.  However, I keep getting the same error message when I attempt to run LiveUpdate.  What must I do to get this AV software to work with Yosemite?

    Get rid of Symantec. You don't need it, or Java for that matter, which comprises a potential vulnerability of its own. Get rid of it too.
    One or more of the following support documents may be applicable:
    Uninstall Norton Internet Security for Mac
    Removing Symantec programs for Macintosh by using the RemoveSymantecMacFiles removal utility
    RemoveSymantecMacFiles

  • CC runs under Mac OS 10.6.8; not under Yosemite 10.10.2

    We are on a secure network via a proxy server. Adobe CC desktop app installs and works fine on Win 7 machines and on our older Macs running OS 10.6.8. However, on our new Macs running Yosemite 10.10.2, and the same proxy config as the older Macs and PCs, the CC destop app launches, asks for proxy credentials (which I provide), then goes to the Creative Cloud log in screen. After signing in to CC, it then goes again to the proxy sign in screen, with the previously provided credentials filled in, and just stops. Apple and Adobe tech support were of  next to no help. Since CC works on the Windows machines and on older Macs using the same proxy server set up, I can't figure out what's going on under Yosemite.

    RWV you will need to apply the same proxy setting change to Ethernet connection as well.  This preferences I showed are utilized to configure each network connection.
    If you continue to face difficulties then I would recommend contacting our support team directly at Contact Customer Care.  If you have a Creative Cloud for Enterprise or Team account then please have your program administrator submit a request.
    I would recommend running the log collector tool referenced at Log Collector Tool prior to contacting our support team. Please make sure to also have the all relevant information regarding your proxy server configuration.  This includes the type of proxy server being used and the version you are running.  If you do not regularly have access to this information then I would recommend including the individuals from your organization who do have those details in the conversation.

  • Cannot make a cache safe URL for "1025/styles/Themable/corev4.css", file not found. Please verify that the file exists under the layouts directory.

    HI
    i restored a sharepoint web 80 application in our test domain
    and after when i browse the new web application 
    it says 
    Cannot make a cache safe URL for "1025/styles/Themable/corev4.css", file not found. Please verify that the file exists under the layouts directory. 
    adil

    Hi  adil,
    According to your description, my understanding is that you encountered the error “Cannot make a cache safe URL for "1025/styles/Themable/corev4.css", file not found. Please verify that the file
    exists under the layouts directory.” .
    The issue happens in
    We have customized master page
    In the master page, we use path the script/style file like this: <SharePoint:CssRegistration name="<% $SPUrl:~SiteCollection/Style Library/coe/mainCOE.css%>"
    runat="server"/>
    While using the dynamic path in a multiple languages enabled site, language Id(1033 etc) will be added to the path automatically. That cause the file to be not found.
    To solve the issue, please download  the Arabic language pack http://www.microsoft.com/en-us/download/details.aspx?id=3411 ,
    install it on  your SharePoint and refresh your browser.
    Reference:
    http://sharepoint-community.net/profiles/blogs/cannot-make-a-cache-safe-url-for-1036-sytles-themable-corev4-css
    Best Regards,
    Eric
    Eric Tao
    TechNet Community Support

  • Deploying an EJB WebService under WLS 9.1 - port component "Hello" is not found in wsdl.

    Hi,
    I'm trying to deploy a simple EJB webservice example on WLS 9.1. The appc
    compile works fine, but the server deployment throw the following error
    message:
    [java] port component "Hello" is not found in wsdl.
    It's simple JAX-RPC based webservice where a SessionBean method is used as
    the service implementation. The same configuration (webservice.xml,
    mapping.xml and HelloService.wsdl) works fine under JBoss 4.0, but not with
    WLS 9.1. Maybe it's a simple configuration error and someone can help.
    Regards
    Guido
    Appendix
    webservice.xml
    <webservices xmlns="http://java.sun.com/xml/ns/j2ee"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee
    http://www.ibm.com/webservices/xsd/j2ee_web_services_1_1\.xsd"
    version="1.1">
    <webservice-description>
    <webservice-description-name>HelloService</webservice-description-name>
    <wsdl-file>META-INF/wsdl/HelloService.wsdl</wsdl-file>
    <jaxrpc-mapping-file>META-INF/mapping.xml</jaxrpc-mapping-file>
    <port-component>
    <port-component-name>Hello</port-component-name>
    <wsdl-port>HelloPort</wsdl-port>
    <service-endpoint-interface>com.jcoffee.components.ws.Hello</service-endpoin
    t-interface>
    <service-impl-bean>
    <ejb-link>HelloBean</ejb-link>
    </service-impl-bean>
    </port-component>
    </webservice-description>
    </webservices>
    mapping.xml
    <?xml version="1.0" encoding="UTF-8"?>
    <java-wsdl-mapping version="1.1" xmlns="http://java.sun.com/xml/ns/j2ee"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee
    http://www.ibm.com/webservices/xsd/j2ee_jaxrpc_mapping_1_1.xsd">
    <package-mapping>
    <package-type>com.jcoffee.components.ws</package-type>
    <namespaceURI>http://ws.components.jcoffee.com/types</namespaceURI>
    </package-mapping>
    <package-mapping>
    <package-type>com.jcoffee.components.ws</package-type>
    <namespaceURI>http://ws.components.jcoffee.com/</namespaceURI>
    </package-mapping>
    <service-interface-mapping>
    <service-interface>com.jcoffee.components.ws.HelloService</service-interface
    >
    <wsdl-service-name
    xmlns:serviceNS="http://ws.components.jcoffee.com/">serviceNS:HelloService</
    wsdl-service-name>
    <port-mapping>
    <port-name>HelloPort</port-name>
    <java-port-name>HelloPort</java-port-name>
    </port-mapping>
    </service-interface-mapping>
    <service-endpoint-interface-mapping>
    <service-endpoint-interface>com.jcoffee.components.ws.Hello</service-endpoin
    t-interface>
    <wsdl-port-type
    xmlns:portTypeNS="http://ws.components.jcoffee.com/">portTypeNS:Hello</wsdl-
    port-type>
    <wsdl-binding
    xmlns:bindingNS="http://ws.components.jcoffee.com/">bindingNS:HelloBinding</
    wsdl-binding>
    <service-endpoint-method-mapping>
    <java-method-name>hello</java-method-name>
    <wsdl-operation>hello</wsdl-operation>
    <method-param-parts-mapping>
    <param-position>0</param-position>
    <param-type>java.lang.String</param-type>
    <wsdl-message-mapping>
    <wsdl-message
    xmlns:wsdlMsgNS="http://ws.components.jcoffee.com/">wsdlMsgNS:Hello_hello</w
    sdl-message>
    <wsdl-message-part-name>String_1</wsdl-message-part-name>
    <parameter-mode>IN</parameter-mode>
    </wsdl-message-mapping>
    </method-param-parts-mapping>
    <wsdl-return-value-mapping>
    <method-return-value>java.lang.String</method-return-value>
    <wsdl-message
    xmlns:wsdlMsgNS="http://ws.components.jcoffee.com/">wsdlMsgNS:Hello_helloRes
    ponse</wsdl-message>
    <wsdl-message-part-name>result</wsdl-message-part-name>
    </wsdl-return-value-mapping>
    </service-endpoint-method-mapping>
    </service-endpoint-interface-mapping>
    </java-wsdl-mapping>
    HelloService.wsdl
    <?xml version="1.0" encoding="UTF-8"?>
    <definitions name="HelloService"
    targetNamespace="http://ws.components.jcoffee.com/"
    xmlns:tns="http://ws.components.jcoffee.com/"
    xmlns="http://schemas.xmlsoap.org/wsdl/"
    xmlns:xsd="http://www.w3.org/2001/XMLSchema"
    xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/">
    <types/>
    <message name="Hello_hello">
    <part name="String_1" type="xsd:string"/>
    </message>
    <message name="Hello_helloResponse">
    <part name="result" type="xsd:string"/>
    </message>
    <portType name="Hello">
    <operation name="hello" parameterOrder="String_1">
    <input message="tns:Hello_hello"/>
    <output message="tns:Hello_helloResponse"/>
    </operation>
    </portType>
    <binding name="HelloBinding" type="tns:Hello">
    <soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="rpc"/>
    <operation name="hello">
    <soap:operation soapAction=""/>
    <input>
    <soap:body use="literal" namespace="http://ws.components.jcoffee.com/"/>
    </input>
    <output>
    <soap:body use="literal" namespace="http://ws.components.jcoffee.com/"/>
    </output>
    </operation>
    </binding>
    <service name="HelloService">
    <port name="HelloPort" binding="tns:HelloBinding">
    <soap:address location="REPLACE_WITH_ACTUAL_URL"/>
    </port>
    </service>
    </definitions>
    and last but not least the ejb-jar.xml
    <?xml version="1.0" encoding="UTF-8"?>
    <ejb-jar xmlns="http://java.sun.com/xml/ns/j2ee" version="2.1"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee
    http://java.sun.com/xml/ns/j2ee/ejb-jar_2_1.xsd">
    <display-name>JCoffee web service sample</display-name>
    <enterprise-beans>
    <session>
    <ejb-name>HelloBean</ejb-name>
    <service-endpoint>com.jcoffee.components.ws.Hello</service-endpoint>
    <ejb-class>com.jcoffee.components.ws.HelloBean</ejb-class>
    <session-type>Stateless</session-type>
    <transaction-type>Container</transaction-type>
    </session>
    </enterprise-beans>
    <assembly-descriptor>
    <method-permission>
    <unchecked/>
    <method>
    <ejb-name>HelloBean</ejb-name>
    <method-name>*</method-name>
    </method>
    </method-permission>
    <container-transaction>
    <method>
    <ejb-name>HelloBean</ejb-name>
    <method-name>*</method-name>
    </method>
    <trans-attribute>Required</trans-attribute>
    </container-transaction>
    </assembly-descriptor>
    </ejb-jar>

    Hi again,
    I got it - i've forgot the namespace prefix for the wsdl-port.
    Now it works.
    Thanks!
    "Ben" <[email protected]> schrieb im Newsbeitrag
    news:[email protected]...
    Hi,
    I'm trying to deploy a simple EJB webservice example on WLS 9.1. The appc
    compile works fine, but the server deployment throw the following error
    message:
    [java] port component "Hello" is not found in wsdl.
    It's simple JAX-RPC based webservice where a SessionBean method is used as
    the service implementation. The same configuration (webservice.xml,
    mapping.xml and HelloService.wsdl) works fine under JBoss 4.0, but notwith
    WLS 9.1. Maybe it's a simple configuration error and someone can help.
    Regards
    Guido
    Appendix
    webservice.xml
    <webservices xmlns="http://java.sun.com/xml/ns/j2ee"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee
    http://www.ibm.com/webservices/xsd/j2ee_web_services_1_1\.xsd"
    version="1.1">
    <webservice-description>
    <webservice-description-name>HelloService</webservice-description-name>
    <wsdl-file>META-INF/wsdl/HelloService.wsdl</wsdl-file>
    <jaxrpc-mapping-file>META-INF/mapping.xml</jaxrpc-mapping-file>
    <port-component>
    <port-component-name>Hello</port-component-name>
    <wsdl-port>HelloPort</wsdl-port>
    <service-endpoint-interface>com.jcoffee.components.ws.Hello</service-endpoin
    t-interface>
    <service-impl-bean>
    <ejb-link>HelloBean</ejb-link>
    </service-impl-bean>
    </port-component>
    </webservice-description>
    </webservices>
    mapping.xml
    <?xml version="1.0" encoding="UTF-8"?>
    <java-wsdl-mapping version="1.1" xmlns="http://java.sun.com/xml/ns/j2ee"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee
    http://www.ibm.com/webservices/xsd/j2ee_jaxrpc_mapping_1_1.xsd">
    <package-mapping>
    <package-type>com.jcoffee.components.ws</package-type>
    <namespaceURI>http://ws.components.jcoffee.com/types</namespaceURI>
    </package-mapping>
    <package-mapping>
    <package-type>com.jcoffee.components.ws</package-type>
    <namespaceURI>http://ws.components.jcoffee.com/</namespaceURI>
    </package-mapping>
    <service-interface-mapping>
    <service-interface>com.jcoffee.components.ws.HelloService</service-interface
    >>
    <wsdl-service-name
    xmlns:serviceNS="http://ws.components.jcoffee.com/">serviceNS:HelloService</
    wsdl-service-name>
    <port-mapping>
    <port-name>HelloPort</port-name>
    <java-port-name>HelloPort</java-port-name>
    </port-mapping>
    </service-interface-mapping>
    <service-endpoint-interface-mapping>
    <service-endpoint-interface>com.jcoffee.components.ws.Hello</service-endpoin
    t-interface>
    <wsdl-port-type
    xmlns:portTypeNS="http://ws.components.jcoffee.com/">portTypeNS:Hello</wsdl-
    port-type>
    <wsdl-binding
    xmlns:bindingNS="http://ws.components.jcoffee.com/">bindingNS:HelloBinding</
    wsdl-binding>
    <service-endpoint-method-mapping>
    <java-method-name>hello</java-method-name>
    <wsdl-operation>hello</wsdl-operation>
    <method-param-parts-mapping>
    <param-position>0</param-position>
    <param-type>java.lang.String</param-type>
    <wsdl-message-mapping>
    <wsdl-message
    xmlns:wsdlMsgNS="http://ws.components.jcoffee.com/">wsdlMsgNS:Hello_hello</w
    sdl-message>
    <wsdl-message-part-name>String_1</wsdl-message-part-name>
    <parameter-mode>IN</parameter-mode>
    </wsdl-message-mapping>
    </method-param-parts-mapping>
    <wsdl-return-value-mapping>
    <method-return-value>java.lang.String</method-return-value>
    <wsdl-message
    xmlns:wsdlMsgNS="http://ws.components.jcoffee.com/">wsdlMsgNS:Hello_helloRes
    ponse</wsdl-message>
    <wsdl-message-part-name>result</wsdl-message-part-name>
    </wsdl-return-value-mapping>
    </service-endpoint-method-mapping>
    </service-endpoint-interface-mapping>
    </java-wsdl-mapping>
    HelloService.wsdl
    <?xml version="1.0" encoding="UTF-8"?>
    <definitions name="HelloService"
    targetNamespace="http://ws.components.jcoffee.com/"
    xmlns:tns="http://ws.components.jcoffee.com/"
    xmlns="http://schemas.xmlsoap.org/wsdl/"
    xmlns:xsd="http://www.w3.org/2001/XMLSchema"
    xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/">
    <types/>
    <message name="Hello_hello">
    <part name="String_1" type="xsd:string"/>
    </message>
    <message name="Hello_helloResponse">
    <part name="result" type="xsd:string"/>
    </message>
    <portType name="Hello">
    <operation name="hello" parameterOrder="String_1">
    <input message="tns:Hello_hello"/>
    <output message="tns:Hello_helloResponse"/>
    </operation>
    </portType>
    <binding name="HelloBinding" type="tns:Hello">
    <soap:binding transport="http://schemas.xmlsoap.org/soap/http"
    style="rpc"/>
    >
    >
    <operation name="hello">
    <soap:operation soapAction=""/>
    <input>
    <soap:body use="literal" namespace="http://ws.components.jcoffee.com/"/>
    </input>
    <output>
    <soap:body use="literal" namespace="http://ws.components.jcoffee.com/"/>
    </output>
    </operation>
    </binding>
    <service name="HelloService">
    <port name="HelloPort" binding="tns:HelloBinding">
    <soap:address location="REPLACE_WITH_ACTUAL_URL"/>
    </port>
    </service>
    </definitions>
    and last but not least the ejb-jar.xml
    <?xml version="1.0" encoding="UTF-8"?>
    <ejb-jar xmlns="http://java.sun.com/xml/ns/j2ee" version="2.1"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee
    http://java.sun.com/xml/ns/j2ee/ejb-jar_2_1.xsd">
    <display-name>JCoffee web service sample</display-name>
    <enterprise-beans>
    <session>
    <ejb-name>HelloBean</ejb-name>
    <service-endpoint>com.jcoffee.components.ws.Hello</service-endpoint>
    <ejb-class>com.jcoffee.components.ws.HelloBean</ejb-class>
    <session-type>Stateless</session-type>
    <transaction-type>Container</transaction-type>
    </session>
    </enterprise-beans>
    <assembly-descriptor>
    <method-permission>
    <unchecked/>
    <method>
    <ejb-name>HelloBean</ejb-name>
    <method-name>*</method-name>
    </method>
    </method-permission>
    <container-transaction>
    <method>
    <ejb-name>HelloBean</ejb-name>
    <method-name>*</method-name>
    </method>
    <trans-attribute>Required</trans-attribute>
    </container-transaction>
    </assembly-descriptor>
    </ejb-jar>

  • HT201237 Final Cut Pro X 10.0.8 not working under Yosemite

    I have Final Cut Pro X 10.0.8 and it stopped working under Yosemite. Are there any fixes or work arounds? Oddly enough, my copy of Final Cut Express 4.01 still works!
    MacBook Pro 13" (Late 2011)
    12 GB RAM
    180 GB Intel 530 SSD

    I'm not seeing Final Cut in my purchases on this device ...
    However ...
    I did change my Apple ID a few times since 2012 (I kept forgetting it and also wanted to consolidate with my other Apple devices ... )
    I actually have Final Cut 10.0.8 installed on two computers. I updated Final Cut on the laptop last year to 10.1 .... but KEPT the old FCP version on the desktop because I liked it.
    However, since I updated to Yosemite on the desktop last week, Final Cut 10.8 will not open --- and I don't have an "update option" in the App store.
    Will this happen on my laptop if I update to Yosemite? That device is running Mountain Lion, I think.  But I would hate to also lose Final Cut 10.1 ... it's all I seem to have left.
    Do I have to purchase Final Cut again for both computers? Thanks very much for your help, it is very appreciated!

  • Error initializing ejb-module; Exception javac.exe not found under

    Dear all,
    I got followings error after i had tried to doing some lab.I had checked the folder "C:\Program Files\Oracle\jre\1.3.1" exists but missed but missing javac.exe. Could anyone can advice me what is going wrong?
    04/04/14 16:44:20 Auto-deploying - web/WEB-INF/classes (No previous deployment found)...
    04/04/14 16:44:20 Error instantiating application 'lab04' at file:/C:/share/oc4j
    /labs/lab04/: Error initializing ejb-module; Exception javac.exe not found under
    C:\Program Files\Oracle\jre\1.3.1, please use a valid jdk or specify the locati
    on of your java compiler in server.xml using the <java-compiler .../> tag
    Thanks in advance!
    Best Regards,
    Chris CHIU

    Dear Chris,
    The answer lies in the error message you got, namely:
    please use a valid jdkAccording to your post, you don't have a JDK, you only have a JRE. The javac compiler is part of the JDK, it is not part of the JRE.
    You can download the JDK from the J2SE Download Web page. Look for the Download J2SE SDK link -- do not choose the Download J2SE JRE link!
    Good Luck,
    Avi.

  • Aurbuild saying "package not found under /var/tmp/aurbuild/pkgbuilds"

    Hello everyone
    I am using aurbuild for installing aur packages. Since some time now, I keep getting the error message:
    package not found under /var/tmp/aurbuild/pkgbuilds
    For example the exact message is:
    lib32-pciutils not found under /var/tmp/aurbuild/pkgbuilds
    No result found
    What can I do about that?
    Thanks in advance
    b1

    Please see our Forum Etiquette regarding bumping b1: https://wiki.archlinux.org/index.php/Fo … te#Bumping
    Have you tried if the same thing happens with other packages and AUR-builders?

  • Authorization "not valid" under Yosemite

    My PS Elements 8 says it's not valid under Yosemite - no place to input, just says to check adobe support.

    Don't allow that person or persons to Skype you. It's a scam!
    An official announcement by adobe about the scam
    Announcement:URGENT NOTIFICATION: Beware of fraudulent support requests.
    Hide Details
    by Pete.Green (March 11, 2015) 
    We have received a number of reports where some members of this community are posing as Adobe Employees by offering to help troubleshoot issues personally using technologies such as Skype as a means to gain
    access to your computer and potentially your personal information.  All Adobe employees are required to have an orange ‘STAFF’ badge next to their user profile which can be seen if you mouse-over their profile picture.

  • When i try to boot usb yosemite , i have this message (sudo: /Applications/Install OS X Yosemite.app/Contents/Resources/createinstallmedia: command not found)

    when i try to boot usb yosemite , i have this message (sudo: /Applications/Install OS X Yosemite.app/Contents/Resources/createinstallmedia: command not found)

    You are getting a kernel panic because you are trying to boot the computer with a Tiger DVD. That model requires 10.6.3 - Snow Leopard. You can purchase replacement discs from Apple:
    Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
    To contact product and tech support: Apple - Support - Contact Apple Support.
    For Mac App Store: Apple - Support - Mac App Store.
    For iTunes: Apple - Support - iTunes.

  • LaunchD Task Scheduler would Launch Automator Apps under Maverick but will not under Yosemite. Why Not?

    LaunchD Task Scheduler would Launch Automator Apps under Maverick but will not under Yosemite. Why Not?
    I have tried going under System Preferences-Security&Privacy-Privacy and adding my Automator generated .app but that does not work.
    Any suggestions?

    Better check the site of the maker of that application for further information:
    http://www.failedinsider.com/support/launchdtaskschedulersupport/

Maybe you are looking for