Reached my broadband limit in a day???!!

My broadband was switched to Option 1 effective today. I have just recieved an email saying that I am near my limit and have used 7GB of the 10GB.
This is impossible. I doubt I have used more than 100mb. I cannot be doing with this.
I have been going on bt fon on my own router, could that explain it?

Ewaawoowaa wrote:
Thanks for the replies.
I have rang Mumbai and they said it will all be updated on Monday with my real usage. I was just in a panic because the reason I switched broadband was because I needed to lower my outgoings fast and I had nightmare visions of a huge £1 per GB bill dropping through the door and giving me more hassle.
The homehub thing is strange. I very much doubt any of my neighbours have hacked my router. I have been using fon on my own hub to keep my usage down and that's all I can think it is.
The 1.3GB upload on the hub would actually tally with my fon use because I was torrenting.
Oh well, I will keep a close eye on it now. It seems to randomly reset anyway which makes it difficult.
Hi.
Indeed the hub may well show BTFon usage, but certainly shows BTVision, digital vault and BBTalk usage - even though these are exempt from the actual usage.
You need to be a bit careful, because the extra usage is £5 for 5GB - if your usage is showing 78GB for the month before changing to Option 1, then that's pretty high to go from unlimited to option 1.
http://www.andyweb.co.uk/shortcuts
http://www.andyweb.co.uk/pictures

Similar Messages

TS4036 Help plz this massage comes up when i restore from iCloud. You have reached your device limit also says Ur apple id has been restored to the maximum number of the time last 90 days.

Help plz this massage comes up when i restore from iCloud. You have reached your device limit also says Ur apple id has been restored to the maximum number of the time last 90 days.

Have you shared your AppleID with anyone - family member or spouse? Any given AppleID can only be associated with 10 devices at a time (five of which can be computers). Once you reach that limit, the 90 day timeout applies before that AppleID can be associated with another, new, device.
You can see the explanation here - http://support.apple.com/kb/HT4627
All you can do is wait the 90 days, sorry but I know of no way around that. If you think the message indicates an error though, then use the Express Lane web support pages to send a note to the AppleID support folks.

"You've reached your device limit"

I am managing 25 ipads for teachers to check out from the same account and I have backed the image up to the cloud. I can no longer restore from the cloud because I receive an error message that says "You've reached the maximum number of devices in the last 90 days." Help!

I too have this problem.
My iPhone was replaced as there was a problem with it. When I attempted to restore from iCloud onto the new phone, I got the message "You've Reached Your Device Limit". I only had 6 devices enabled. All of my contacts, messages, account settings etc. would restore but any third party apps would not, they would be on my home screen, but greyed out and 'Waiting'. Attempting to tap on the app to get the download going would result in the same error message about device limits popping up.
I spent almost 2 hours on the phone with Apple about this and a solution wasn't found. Lots of different things were tried, turning iTunes Match off, signing in and out of iCloud and iTunes storeaccounts then restoring the phone. Every time the same thing happened. If I deleted an app, then tried to install it fresh, it too would just say 'Waiting'.
I was able to download an app on my Mac and transfer it across however.
There was a work around though. The Apple person I spoke with contacted the iTunes store team who deleted any apps that were in my download queue. I then deleted all troublesome apps from my iPhone, went back into the app store app, updates, purchases, not on this phone and then reinstalled apps I wanted back.
Not ideal, but at least I have all my apps back. Apple themselves don't know why this is happening and they do have engineeers looking into it. I just hope now nothing happens to my phone and I don't need to restore from iCloud in the next 90 days.
Anyone with this problem I would recommend backing up to iTunes and then if you do have to restore your phone do this through iTunes as the problem is only with iCloud restores I believe.

Why am I getting a "You've reached your device limit" error?

Help, I bought a new iPad and got a warranty replacement of my iPhone 5 last night. I restored my iPhone and I got that error, but all of my apps and setting loaded, but then, when I tried to restore my new iPad using my ipad 2's restore, I get that error. I currently have active on my account
2 iPhone 5's (mine and my wife$
1 64 gb new iPad
1 16 gb iPad 2 (which is now going off my account and on eBay)
So I don't need the iPad 2 to be synced to my account anymore, but I don't want to delete it until I can start using my new iPad. How do I deactivate my ipad 2 do I to open a slot for my new ipad and restore it?

I tried this and still have the same issue. I went in a removed a handful of associated devices in Manage Devices in iTunes, restarted my phone and still get the same "You've reached your device limit. This Apple ID has already restored to the maximum number of devices in the last 90 days."
What's really frustrating is that this was caused by having multiple consecutive replacement iPhones from the Genius Bar. When I was given a replacement I restored from my iCloud backup but the phone was defective so I had to get another and do the same the very next day. Now I can't restore any of my third party app data to my current phone and have no path for resolution.
Does this mean I have to wait 90 days to use my apps?!? If thats the case I might as well have my old Nokia Razor.
I'm out of town and away from my primary computer for weeks. Not to mention I've put my faith in iCloud and assumed my content was safe and available when I needed it so I don't have a backup on my computer that I could restore from even when I do make it back home.

Exchange 2010 SP2 RU2 - Indexing backlog reached a critical limit of 48 hours or the number of items in the retry queue is greater than 10000 for one or more databases

We have been getting intermittent SCOM alarms for our Exchange 2010 MBX server citing "Indexing backlog reached a critical limit of 48 hours or the number of items in the retry queue is greater than 10000 for one or more databases"
I see events in EventViewer that SCOM is triggering on, but not whats generating the events or how else to test for them.
    get-eventlog -computername SERVERNAME -logname "Application" -after "03/14/2013" | ?{$_.eventid -eq "5604"} | select MachineName,EventID,EntryType,Message | ft -autosize
One MS Forum post online says it is a bug in RU4, unclear if it may also be a bug in RU2 (our installed version).
    http://social.technet.microsoft.com/Forums/en-US/exchangesvradmin/thread/9dcb3011-9327-4935-9479-62b38a6ddd87
    "I was looking for the same error and found this.. it basically says that this is a bug in RU4 and RU4-v2...and it needs to be removed."
tests using troubleshooting scripts find no issues with search indexer,
    [PS] C:\Program Files\Microsoft\Exchange Server\V14\scripts>.\Troubleshoot-CI.ps1
    Get-EventLog : No matches found
    At C:\Program Files\Microsoft\Exchange Server\V14\scripts\CITSLibrary.ps1:622 char:40
    + $msftesqlCrashes = get-eventlog <<<< -computername $Server -after $StartTime -logname "Application" -source $msftesqlServiceName | where {$_.eventId
    -eq $msftesqlCrashEventId}
        + CategoryInfo : ObjectNotFound: (:) [Get-EventLog], ArgumentException
        + FullyQualifiedErrorId : GetEventLogNoEntriesFound,Microsoft.PowerShell.Commands.GetEventLogCommand
    Name IsDeadLocked CatalogStatusArray
    SERVERNAME False {DATABASENAME\SERVERNAME, DATABASENAME\S...
    [PS] C:\Program Files\Microsoft\Exchange Server\V14\scripts>
and tests against searches on each DB themselves show no issues and respond typically within 3 seconds.
    [PS] C:\Program Files\Microsoft\Exchange Server\V14\scripts>Test-ExchangeSearch | ft Server, Database, ServerGuid, ResultFound, SearchTimeInSeconds, Error -AutoSize
    Server Database ServerGuid ResultFound SearchTimeInSeconds Error
    SERVERNAME DATABASENAME b16e3461-257c-40dd-a9ad-99a5f41a927e True 2.937
I also tried to check the Performance Viewer for the MSExchange Search Indexer and MXExchange Search Indices but am unsure which of the many metrics would indicate this issue.
We have had no reports of search issues from our users and have been unable to duplicate any impairment in our testing.
Does anyone else have any suggestions for tests to check or steps to take on this alert? Is it simply a false alarm or a timeout of other sorts during testing? We have 80 DAGs on this server (as well as all our servers, some of which have also reported the
same alert) and the Test-ExchangeSearch command times out before completely testing all DAGs.

Hi IAMChrisL,
Any updates?
Frank Wang
TechNet Community Support

How can I unregister my itunes from a laptop I know longer have access to? I have reached my 5 limit and no longer have access to any of them!

How can I unregister my itunes from a laptop I know longer have access to? I have reached my 5 limit and no longer have access to any of them!

If you connect an external hard drive with music, iTunes won't know the music exists there until you tell it. There are two simple ways to tell the application about the music. 1) Drag the folder(s) that contain music files onto the iTunes icon on the Dock or 2) select Add to Library from the File menu and then use the fileselector to select the drive with the music.

I have tried to load iTunes Match onto my computer but it tells me I have reached my 5 limit. I do not have 5 items however I did have one of them stolen. Please can anyone help me to find out what is being counted as my 5

Please can you help me?
I have tried to load iTunes Match onto my mac Pro but it tells me I have reached my 5 limit. I do not have 5 items with iTunes match on them so I am confused.
I have two iMacs a phone and iPod and want to put match onto my pro. Is there anywhere I can go to see which items are actually on there?
We had a burglary last year and did have an iMac taken is it possible I can see if that is one of the 5 and if so how and where do I look and how can I remove it?
I will be so grateful if anyone can please help me.
Many thanks Helen

In your Itunes account.

What is the difference in the System Event triggers: Any queue limit set to zero and System queue reached its job limit

My co-worker and I are not sure what the difference between Any queue limit set to zero and System queue reached its job limit are in the System Events.

Hi jlayton,
System queue limit is the sum of all queue limits you have defined. For example, if you have a system queue limit of, say, 100 -- queue A has 50 jobs active, and queue B also has 50 jobs active, then you will receive an alert System queue reached its job limit since it is set to 100.
Any queue limit set to zero. Note, this may also include the System queue. For example, if you want to gracefully stop Tidal, you may want to set system queue = 0 so that there are no active jobs. When you do this, you will receive an alert queue limit set to zero.
BR,
Derrick Au

ISE-5443 RADIUS request dropped due to reaching EAP sessions limit

Hi Guys,
I am getting the below error message from two PSNs (out of 4) & resulting 95% failed authentications on ISE
"5443 RADIUS request dropped due to reaching EAP sessions limit"
Could not find any documents/reference & trying to get on hold TAC in the mean time.
If anyone of you know what could it be, pls share your inputs
TIA
Rasika

Hi Scott,
Thanks for that..
here is bit more information about this evnts log in ISE system (1.2 Patch 4).
Event: 5405 RADIUS Request dropped
Failure Reason :5443 RADIUS request dropped due to reaching EAP sessions limit
Resolution : Wait a few seconds before invoking another RADIUS request with new EAP session. If system overload continues to occur, try restarting the ISE Server
Root cause: A RADIUS request was dropped due to reaching EAP sessions limit. This condition can be caused by too many parallel EAP authentication requests.
Worked with TAC & restarted the service of one PSN node & that brings that node to normal condition & removed the other PSN form the F5 pool until TAC analyze gathered support bundle from that.
It is not heavily loaded environment (3k wireless clients) at the moment & bit scary since we are expecting around 15k when students are back in early March. Authentication failure rate is around 100 in every 15-20s interval. Not sure what is the limitation of the ISE system itself to handle number of EAP sessions per second.
Rasika

Check if A/R summary has exceeded time limit:exceeded by days/hours 42 14 ?

When I place an sale order with VA01, there is a warnning:
Check if A/R summary has exceeded time limit:exceeded by days/hours 42 14
What does it mean?

Hi
Check wheather you have done credit management or not. So check in OVA8 wheather you have maintained data or not. Also check in FD32 wheather you have maintained A/R summary for that customer.or not .
Regards
Srinath

HT1373 I have lost my harddrive which contains a vast amount of music I've been collecting for many years. I just purchased a new Mac, but I've reached my activation limit. And I only have access to 2 of the 5 activated computers. What will happen to my m

I have lost my harddrive which contains a vast amount of music I've been collecting for many years. I just purchased a new Mac, but I've reached my activation limit. And I only have access to 2 of the 5 activated computers. My old music can still be played on my iPod, but I need to set up another account on my new Mac. What will happen to my music if I were to deactivate all of activated computers?

Authorization determines to which computers material requiring authorization can be transferrred using the itunes interface. If you want to re-download past purchases then a computer need to be authorized.
As for transferring music from the iPod, your i-device was not designed for unique storage of your media. It is not a backup device and media transfer is designed with you maintaining a master copy of your media on a computer which is itself properly backed up against loss. Syncing is one way, computer to device, updating the device content to the content on the computer, not updating or restoring content on a computer. The exception is purchased content.
iTunes Store: Transferring purchases from your iOS device or iPod to a computer - http://support.apple.com/kb/HT1848 - only media purchased from iTunes Store
For transferring other items from an i-device to a computer you will have to use third party commercial software. Examples (check the web for others; this is not an exhaustive listing, nor do I have any idea if they are any good):
- Senuti - http://www.fadingred.com/senuti/
- Phoneview - http://www.ecamm.com/mac/phoneview/
- MusicRescue - http://www.kennettnet.co.uk/products/musicrescue/ - Mac & Windows
- Sharepod (free) - http://download.cnet.com/SharePod/3000-2141_4-10794489.html?tag=mncol;2 - Windows
- Snowfox/iMedia - http://www.mac-videoconverter.com/imedia-transfer-mac.html - Mac & PC
- iexplorer (free) - http://www.macroplant.com/iexplorer/ - Mac&PC
- Yamipod (free) - http://www.yamipod.com/main/modules/downloads/ - PC, Linux, Mac [Still updated for use on newer devices? No edits to site since 2010.]
- 2010 Post by Zevoneer: iPod media recovery options - https://discussions.apple.com/message/11624224 - this is an older post and many of the links are also for old posts, so bear this in mind when reading them.
Syncing to a "New" Computer or replacing a "crashed" Hard Drive - https://discussions.apple.com/docs/DOC-3141 - dates from 2008 and some outdated information now.
Copying Content from your iPod to your Computer - The Definitive Guide - http://www.ilounge.com/index.php/articles/comments/copying-music-from-ipod-to-co mputer/ - Information about use in disk mode pertains only to older model iPods.
Get Your Music Off of Your iPod - http://howto.wired.com/wiki/Get_Your_Music_Off_of_Your_iPod - I am not sure but this may only work with some models and not newer Touch, iPhone, or iPad.
Additional information here https://discussions.apple.com/message/18324797

Have i-Tones account that has reached 5 computer limit. Need to "deauthorize" other computers but can't because had to turn into my company when I retired. What do I do??

Have i-Tones account have reached 5 computer limit. Need to "deauthorize" other computers but can't because I had to turn into my company when I retired. What do I do??

I quote:
To deauthorize all computers associated with your account
If you find you have reached 5 authorizations, you can reset your authorization count by clicking Deauthorize All in the Account Information screen.
Click iTunes Store in the menu on the left side of iTunes.
If you're not signed in to the store, click the Account button, then enter your account name and password.
Click the Account button again (your ID appears on the button), enter your password, and then click View Account.
In the Account Information window, click Deauthorize All.
Note: You may only use this feature once per year. The Deauthorize All button will not appear if you have fewer than 5 authorized computers, or if you have used this option within the last 12 months. If you need assistance on using this feature, please contact the iTunes Store support via email (http://www.apple.com/support/itunes/ww/).
Once you have done this you can re-authorize the computers you need to.

I have the ipad 4g and it is displaying the message "resource limit reached" only had it for two days

I have the ipad 4g and it is displaying the message "resource limit reached" only had it for two days

Are restrictions turned on? I suspect the "resource limit" is something that is set there.
Settings > General > Restrictions

HT4863 Message placed in outbox- reached my sending limit?-How

I have somehow reached an internal iCloud limit that has not been noted by Apple in the mail spec below:
Limits on Sending Messages
iCloud has several safeguards to ensure that only iCloud members can send messages using the iCloud outgoing mail server. Among these safeguards are reasonable limitations on:
The total number of messages you can send each day (200 messages)
The number of recipients to whom you can send each day (1000 recipients)
The maximum number of recipients per message (100 recipients)
The size of incoming and outgoing messages (20 MB)
iCloud email has been designed primarily for personal use. Sending unsolicited bulk email messages through iCloud email servers is prohibited. To review the iCloud membership agreement and acceptable use policy, please see theiCloud Terms and Conditions.
NOTES:
I have tried to send from multiple iPads, iPhones, MacBook Pros... even the browser based iCloud in hopes sometrhing might go outbound. No dice.
-I am a light weight user in Mail meaning it's mostly text responses with an occasional pic or mov.
-I have a 25GB iCloud acct and still show 7.4 GB available.
-I have not:
     -Bulk mailed
     -exceeded 200 messages sent in day
     -used up 1000 recips in day
     -copied more than 100 in a message
     -or exceeded 20MB in or out
All other iCloud functions are working.
Help!

For what it's worth, I've seen a number of posts like this in the last week. There may be a problem at Apple's end. You would have to contact support to find out (http://www.apple.com/support/icloud/contact/).

New Broadband worked for a day 8 days ago and BT s...

Hi
This is on behalf of my mum.
She had BT total broadband and telephone line installed on the 22/3/2011 she moved from virginmedia and took her number with her.
The broadband worked for half a day and has not worked since.
The Internet light is constantly flashing orange and purple and never connects.
For the first 4 days when calling bt she was advised there was a problem in the area each time she rang for northern england, northern ireland and scotland.
However a problem this big where no one in those areas could connect would make the news!!
My mum has asked several neighbours and friends if their bt broadband is not working and theirs are working fine.
She has now also called bt broadband support for the last 2 days and has been promised callbacks which do not arrive and also when calling back herself is advised she will get a callback in 24 hours which never happens.....
I live approx 200 miles away and have tried to diagnose the best I can and have ascertained there seems to be an ADSL connection but it doesnt then connect
Am I right in thinking that a homehub (3) authenticates via telephone number to connect to the internet?
If that is so then is it possible that the bt line was installed with a temporary number and then the virginmedia number was ported in and then the broadband stopped authenticating if the temp number was the allowed number and hasnt been updated?
Any help would be greatly appreciated and she has tried all the usual reset, take the front of the bt linebox, changed the filter etc etc but nothing works and bt are providing her with no customer support whatsoever.
many thanks
a very ear chewed off son :-)
Paul

Hi PaulN
Welcome to the community.
We can investigate this for you but will require some more information from what you have explained you have gone through a lot of the basic diagnostics and as you live far from your mother, posting up router stats on here isn't really an option.
Contact me via the contact us form in my profile and I can assist you further.
Stuart
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

Reached my broadband limit in a day???!!

Similar Messages

Maybe you are looking for