Read 0-48 Vdc with FP-AI-100

I wonder whether or not I can use +-30Vdc of FP-AI-100 to measure 0-48 Vdc signal. Any suggestion ? Thanks

The FP-AI-100 can read up to +/- 36 Volts. You can theoretically, provide an offset to the signal and change the reference point (for example, add -24 Volts so the signal varies from -24 to 24 Volts). However, a better option is to use an FP-AI-102. The FP-AI-102 modules released in December 2001 (so they are not in the 2002 catalog) but the spec sheets are on the web. http://sine.ni.com/apps/we/nioc.vp?cid=10832〈=US
The FP-AI-102 offers six voltage input ranges 0-20 V, 0-60 V, 0-120V, +/- 20 V, +/- 60 V, +/-120 V. The FP-AI-102 has the same resolution (12 bit) and update rate (2.8 ms) as the FP-AI-100.
Regards,
Aaron

Similar Messages

TS3276 cannot receive mail after i sent a large photo. A new folder appeared called "recovered messages" with the over 100 recovered emails of the same email of the one i sent out. i have read apple support and done everything they suggest. Help!

I cannot receive mail after i sent a large photo. A new folder appeared called "recovered messages" with the over 100 recovered emails of the same email of the one i sent out. i have read apple support and done everything they suggest. Help!

How large is 'large'?

Windows 8.1 PC, using reader, when searching a folder containing approx 100 doc's. If i search for a word, no results are returned. only the doc names can be found but nothing from within the doc. This is a new problem and was not the case before.

Windows 8.1 PC, using reader, when searching a folder containing approx 100 doc's. If i search for a word, no results are returned. only the doc names can be found but nothing from within the doc.
This is a new problem and was not the case before.

Works perfectly fine for me with the latest Reader version (11.0.09).
You write that it worked "before"; before what? An update? Update from what version to what version?

I have downloaded adobe download assistant but when ever i click on sign in it says 'error communicating with adobe (error 100). please help.

I have downloaded adobe download assistant but when ever i click on sign in it says 'error communicating with adobe (error 100). please help.

Boskou41043636 for information on how to resolve error 100 please see Troubleshoot Adobe Download Assistant.

Outstanding job opportunity with a Fortune-100 national company here in South Florida.

Outstanding job opportunity with a Fortune-100 national company here in South Florida.If you possess Strong knowledge with Hyperion Essbase; Hyperion Planning; and Hyperion Reports you are one phone call away to get hired. You will have strong finance and IT background so you could provide design expertise to consolidate the flow of information from 300+ sites into the corporate database. Endre PappSr. Technical [email protected] Staffing Solutions (S3)http://www.strategicstaff.com 954-577-5445 x18 Office954-854-3794 Mobile954-577-5453 Fax877-295-8326 x18 (Toll Free)

"If you possess Strong knowledge with Hyperion Essbase; Hyperion Planning; and Hyperion Reports you are one phone call away to get hired."Wow.

Wireless capability Compaq Presario SR1950NX with Integrated 10/100 Base-T networking interface

Wireless capability available for 6-year old Compaq Presario SR1950NX desktop with "Integrated 10/100 Base-T networking interface" ? How best to do this. Wireless adapter via USB 2.0 ? Have Time Warner's modem and my Linksys N750 router in another room, and want to use wireless printer in a third room. Router currently serves Smart TV and a Lap Top in different rooms.

Hi:
Yes, the easiest thing to do is to purchase an external usb wireless adapter.
I just got this one for my desktop.
http://www.linksys.com/en-eu/products/adapters/AE3000
You can read some customer reviews on the adapter at the link below.
http://www.newegg.com/Product/Product.aspx?Item=N82E16833124477
I am very happy with mine. It connects to my Linksys E4200 router at 450 MBPS on my N only 5.0 GHz band.
I believe that is the maximum throughput for the AE 3000 wireless adapter.
I also like that it comes with the 3' usb extension cable and cradle to position the device for the best reception.

Sir i am using datasocket read ,i am communicating with java but my problem is that bcz im using while loop to see if value has changed my labview consumes all the processors time ,sir i want a event like thing so that while loop is not in continuous loop

sir i have given lot of effort but i am not able to solve my problem either with notifiers or with occurence fn,probably i do not know how to use these synchronisation tools.

sir i am using datasocket read ,i am communicating with java but my problem is that bcz im using while loop to see if value has changed my labview consumes all the processors time ,sir i want a event like thing so that while loop is not in continuous loopHi Sam,
I want to pass along a couple of tips that will get you more and better response on this list.
1) There is an un-written rule that says more "stars" is better than just one star. Giving a one star rating will probably eliminate that responder from individuals that are willing to anser your question.
2) If someone gives you an answer that meets your needs, reply to that answer and say that it worked.
3) If someone suggests that you look at an example, DO IT! LV comes with a wonderful set of examples that demonstate almost all of the core functionality of LV. Familiarity with all of the LV examples will get you through about 80% of the Certified LabVIEW Developer exam.
4) If you have a question first search the examples for something tha
t may help you. If you can not find an example that is exactly what you want, find one that is close and post a question along the lines of "I want to do something similar to example X, how can I modify it to do Y".
5) Some of the greatest LabVIEW minds offer there services and advice for free on this exchange. If you treat them good, they can get you through almost every challenge that can be encountered in LV.
6) If English is not your native language, post your question in the language you favor. There is probably someone around that can help. "We're big, we're bad, we're international!"
Trying to help,
Welcome to the forum!
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

After reading and resetting everything with Keyboard I still get blank white screen. The only way I can boot to Mavericks is unplug power cord, push and hold power button while plugging power cord in. Fans at full speed.

After reading and resetting everything with Keyboard I still get blank white screen on 2nd? page of boot. The only way I can boot to Mavericks is unplug power cord, push and hold power button while plugging power cord in. Fans run at full speed, machine boots then runs normal except the dvdrw will not . The mid 2011 IMAC had the same problem with LION. I changed hard drives, formatted, and installed a clean install of latest os x mavericks. Any help would be greatly appreciated.
EtreCheck version: 1.9.15 (52)
Report generated August 30, 2014 at 6:56:41 PM EDT
Hardware Information: ?
    iMac (21.5-inch, Mid 2011) (Verified)
    iMac - model: iMac12,1
    1 2.5 GHz Intel Core i5 CPU: 4 cores
    4 GB RAM
Video Information: ?
    AMD Radeon HD 6750M - VRAM: 512 MB
        iMac 1920 x 1080
System Software: ?
    OS X 10.9.4 (13E28) - Uptime: 0 days 0:16:53
Disk Information: ?
    ST3120026AS disk0 : (120.03 GB)
    S.M.A.R.T. Status: Verified
        EFI (disk0s1) <not mounted>: 209.7 MB
        Untitled (disk0s2) / [Startup]: 119.17 GB (87.12 GB free)
        Recovery HD (disk0s3) <not mounted>: 650 MB
    HL-DT-STDVDRW GA32N
USB Information: ?
    Apple Inc. FaceTime HD Camera (Built-in)
    CHICONY USB NetVista Full Width Keyboard
    Apple Inc. BRCM2046 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Computer, Inc. IR Receiver
    Apple Internal Memory Card Reader
Thunderbolt Information: ?
    Apple Inc. thunderbolt_bus
Gatekeeper: ?
    Anywhere
Kernel Extensions: ?
    [loaded]    com.nvidia.CUDA (1.1.0) Support
    [loaded]    com.sophos.kext.sav (9.0.61 - SDK 10.7) Support
    [loaded]    com.sophos.nke.swi (9.0.53 - SDK 10.8) Support
Startup Items: ?
    CUDA: Path: /System/Library/StartupItems/CUDA
    FanControlDaemon: Path: /Library/StartupItems/FanControlDaemon
Launch Daemons: ?
    [loaded]    com.adobe.fpsaud.plist Support
    [running]    com.arcsoft.eservutil.plist Support
    [running]    com.bjango.istatmenusdaemon.plist Support
    [loaded]    com.oracle.java.Helper-Tool.plist Support
    [running]    com.sophos.autoupdate.plist Support
    [running]    com.sophos.configuration.plist Support
    [running]    com.sophos.intercheck.plist Support
    [running]    com.sophos.notification.plist Support
    [running]    com.sophos.scan.plist Support
    [running]    com.sophos.sxld.plist Support
    [running]    com.sophos.webd.plist Support
Launch Agents: ?
    [running]    com.arcsoft.esinter.plist Support
    [running]    com.bjango.istatmenusagent.plist Support
    [loaded]    com.nvidia.CUDASoftwareUpdate.plist Support
    [loaded]    com.oracle.java.Java-Updater.plist Support
    [running]    com.sophos.uiserver.plist Support
User Login Items: ?
    Macs Fan Control
    Firefox
Internet Plug-ins: ?
    FlashPlayer-10.6: Version: 14.0.0.176 - SDK 10.6 Support
    Flash Player: Version: 14.0.0.176 - SDK 10.6 Support
    QuickTime Plugin: Version: 7.7.3
    JavaAppletPlugin: Version: Java 7 Update 67 Check version
    Default Browser: Version: 537 - SDK 10.9
Audio Plug-ins: ?
    BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
    AirPlay: Version: 2.0 - SDK 10.9
    AppleAVBAudio: Version: 203.2 - SDK 10.9
    iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
    Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes: ?
    CUDA Preferences Support
    Fan Control Support
    Flash Player Support
    Java Support
Time Machine: ?
    Time Machine not configured!
Top Processes by CPU: ?
         1%    WindowServer
         1%    fontd
         0%    firefox
         0%    SystemUIServer
         0%    SophosWebIntelligence
Top Processes by Memory: ?
    229 MB    firefox
    156 MB    SophosScanD
    152 MB    InterCheck
    131 MB    com.apple.IconServicesAgent
    115 MB    SophosAntiVirus
Virtual Memory Information: ?
    424 MB    Free RAM
    1.53 GB    Active RAM
    1.37 GB    Inactive RAM
    699 MB    Wired RAM
    1.26 GB    Page-ins
    0 B    Page-outs

I'd start by getting rid of the following software responsible for these extensions.
Kernel Extensions: ?
    [loaded]    com.nvidia.CUDA (1.1.0) Support
    [loaded]    com.sophos.kext.sav (9.0.61 - SDK 10.7) Support
    [loaded]    com.sophos.nke.swi (9.0.53 - SDK 10.8) Support
Startup Items: ?
    CUDA: Path: /System/Library/StartupItems/CUDA
    FanControlDaemon: Path: /Library/StartupItems/FanControlDaemon
Use the uninstaller provided with the Sophos software. You can uninstall CUDA via the preference pane. Be sure you remove the com.nvidia.CUDA extension which is located in the /System/Library/Extensions/ folder. Not sure if Fan Control has an uninstaller so you will have to do it manually:
Uninstalling Software: The Basics
Most OS X applications are completely self-contained "packages" that can be uninstalled by simply dragging the application to the Trash. Applications may create preference files that are stored in the /Home/Library/Preferences/ folder. Although they do nothing once you delete the associated application, they do take up some disk space. If you want you can look for them in the above location and delete them, too.
Some applications may install an uninstaller program that can be used to remove the application. In some cases the uninstaller may be part of the application's installer, and is invoked by clicking on a Customize button that will appear during the install process.
Some applications may install components in the /Home/Library/Applications Support/ folder. You can also check there to see if the application has created a folder. You can also delete the folder that's in the Applications Support folder. Again, they don't do anything but take up disk space once the application is trashed.
Some applications may install a startupitem or a Log In item. Startupitems are usually installed in the /Library/StartupItems/ folder and less often in the /Home/Library/StartupItems/ folder. Log In Items are set in the Accounts preferences. Open System Preferences, click on the Accounts icon, then click on the LogIn Items tab. Locate the item in the list for the application you want to remove and click on the "-" button to delete it from the list.
Some software use startup daemons or agents that are a new feature of the OS. Look for them in /Library/LaunchAgents/ and /Library/LaunchDaemons/ or in /Home/Library/LaunchAgents/.
If an application installs any other files the best way to track them down is to do a Finder search using the application name or the developer name as the search term. Unfortunately Spotlight will not look in certain folders by default. You can modify Spotlight's behavior or use a third-party search utility, EasyFind, instead.
Some applications install a receipt in the /Library/Receipts/ folder. Usually with the same name as the program or the developer. The item generally has a ".pkg" extension. Be sure you also delete this item as some programs use it to determine if it's already installed.
There are many utilities that can uninstall applications. Here is a selection:
    1. AppZapper
    2. AppDelete
    3. Automaton
    4. Hazel
    5. AppCleaner
    6. CleanApp
    7. iTrash
    8. Amnesia
    9. Uninstaller
10. Spring Cleaning
For more information visit The XLab FAQs and read the FAQ on removing software.
Be sure to remove your two Login Items. Finally do this:
Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
Reinstall Lion, Mountain Lion, or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
     Note: You will need an active Internet connection. I suggest using Ethernet
                 if possible because it is three times faster than wireless.

Re: SD reader - did not work with 8gb card

Hi, how can I read my Micro SD (with SD adapter) - (8gb SDHC), my PC didnt see this card. If I plug my 2gb micro SD is all ok. Is problem with SDHC? or capacity 8gb?)
Thanks
[email protected]

Hi
I dont know what notebook you have but did you check the user manual? There you can find a list what types of SD cards are supported.
Check this!!!
Some notebooks can only read SD cards but not SDHC cards.

ABZO Posting with T Type 100 By LSMW ( with Dep areas restriction)

Hi Gurus
I have few hundreds of Assets that are created before the Activation of New dep Areas. Now i have to updated the Acquisition costs to those 10 and 11 Dep areas only. I am able to do the update the acquisition costs to Asset master by ABZO tcode with restricted T type 100 for 10 and 11 Dep areas manually But i have to do it by LSMW process with BAPI method, But ended up in the following error message.
Posting with transaction type 100 is not possible here, see long text
Message no. AAPO177
Diagnosis
Transaction type 100 has a depreciation area limitation, although posting is not mandatory in all of the depreciation areas entered. However, it is not possible to select depreciation areas in the current transaction.
Procedure
Check the specifications for transaction type 100 or use transaction LSMW to enter the transaction.
Please guide me the procedure to fix this issue.
Meenakshi.N
Edited by: Meenakshi.Nakshatrula on Jun 21, 2010 4:35 AM

ABZO - Tcode,
100 - Transaction type
Assets - Non AUC assets
Mistake is when i am recording the Session i haven't correctly determined the Depreciation areas. That lead me into error message.
I was able to do it successfully by Batch input recording method instead of BAPI.
Thanks
Meenakshi.N

How do I install Adobe Reader onto a computer with no internet?

I have a computer running Windows 8 with no internet connection. Is there a way to install Adobe Reader onto the machine with either CD or a USB drive?
Also, would there be a simple way to keep Adobe Reader updated offline?

Download the FULL installer here: http://get.adobe.com/reader/enterprise/
Put it on a flash drive and install it from there.
Bookmark that link for future reference

Adobe form-Able to post data using Adobe Reader 9 but not with Adobe Proff

Hello Guru's
I am facing one problem with adobe forms.
We have develoed a adobe form using adobe reader 9.
Now when user are posting the purchase requistion using the form,they are able to post the data using
Adobe Reader 9 but not with Adobe Reader professional.
Can anyone please advice me what can be the problem here.

Adobe Reader 9 can't save the old FDA forms. FDA must update their forms.

When syncing my iphone 6 plus, i now get an error that reads, "IP address conflicts with another system or network." How can i eliminate this error permanently? Thank you in advance!

when syncing my iphone 6 plus, i now get an error that reads, "IP address conflicts with another system or network." How can i eliminate this error permanently? Thank you in advance!
This never happened before, however the last couple of months it comes up every time I plug my USB from PC to iphone.

HyperNova Software,
Thank you so much. Because I am very computer illiterate, could you help me on how to get started? I don't have the slightest on where to get started, the steps to follow, etc.
Can't thank you enough for your help!

Read MULTIPLE idocs data with all sgmn to my internal table in a single

Dear SAP Folks!
I have a question, I know to read SINGLE idoc data with all segments, we have FM IDOC_READ_COMPLETELY but my requirement is to Read MULTIPLE idocs data with all segments to my internal table in a single shot without keeping this FM in loop! since it is performance issue, at a time i may want to read 1000 idocs data!
Could anyone please let me know is there any way to get this, keeping mind of performance and any other FM?
Best Regards,
Srini

Hi,
I know idoc numbers and i can write a select Query to DB table EDID4 to get all segments data to my internal table. But i am looking for FM to do this. because i have too many number of idocs and each idoc is having many segments(I am thinking in performance point of view!) The FM IDOC_READ_COMPLETELY can accept only ONE IDOC number as import parameters at a time to get segment data. in similar way do we have any other FM? or other way? except select query to EDID4 table?
Best Regards,
Srini

Excel 2013 (pro plus) extermely slow with sheets with more than 100 checkboxes

I have a customer with Excel 2013 (pro plus).
They use sheets with more than 100 checkboxes in it.
The sheet is extremly slow to display. When a user starts scrolling down, the checkboxes appear very slowly, one by one.
It happens with all users, on both x86 and 64bits Windows 8 PC's and Office clients (32b & 64b).
Anyone any idea?

Hi R.Nieraeth,
Could you please let us know what exactly these checkbox was used for ? Any formulas depend on these checkbox? Or any VBA code in this excel file? If so, you may need to check your formulas or the VBA code.
In addition,does this issue happen only on excel 2013? You can try to disable hardware graphics acceleration: Click
File, and then click Options. In the Advanced group, click to select the
Disable hardware graphics acceleration check box. Click ok.
Also please check if the following thread is helpful:
http://social.technet.microsoft.com/Forums/en-US/a9a257fa-ce8b-4399-860c-563022b8714f/checkbox-bug-in-excel-2010-slow-response?forum=excel

Read 0-48 Vdc with FP-AI-100

Similar Messages

Maybe you are looking for