Read a Deep Structure

Hi Abapers, how can i read a Deep Structure? i mean, read a field inside a table that i'ts inside another table.
[TABLE1 [TABLE2-FIELD] ] -> I need read the "Field" Value

Hi Carlos
Here is an approach I believe that can help:
LOOP AT <main_table> INTO <main_wa> .
LOOP AT <wa>-<inner_table> INTO <inner_wa> .
<var_1> = <inner_wa>-<field_to_be_read> .
ENDLOOP .
ENDLOOP .
And as a last thing, let me introduce you the SDN forums pointing system: You can assign points to posts you find helpful while solving your question. You can reward points by clicking the yellow star icon at header of each reply post. You can reward;
- one 10 points (solved)
- two 6 points (very helpful answer)
- many 2 points (helpful answer)
Kind Regards...
*--Serdar

Similar Messages

From deep structured to flat itab

Hi experts!
I need to copy three columns from an internal table itab_upload. I defined the structure for it in the DDIC. It contains 5 columns and another table(Itab_note) for possible entries. For a report I need to copy 3 columns of the itab_upload table (not from the itab_note) into another table and display this using ALV.
Can you please advise how to get the 3 columns from the structured into the flat table so I can use ALV for displaying?
Thanks a lot!
Johann

You can use the same internal table itab_upload to pass to the ALV Function Module. If this is a deep structure, pass only the field that contains the internal table values in that deep structure.
Ex. itab_upload-field1-field12
If you want to show only 3 fields form the internal table on the ALV, create the fieldcat manually so that only those 3 fields are present in the fieldcat that is passed to the ALV Function module.
Ex. to create a fieldcat manually :
data : it_fieldcat type slis_t_fieldcat_alv,
 wa_fieldcat like line of it_fieldcat,
clear wa_fieldcat.
wrk_pos = wrk_pos + 1.
wa_fieldcat-col_pos = wrk_pos.
wa_fieldcat-tabname = 'ITAB_UPLOAD'.
wa_fieldcat-fieldname = 'FIELD1'.
wa_fieldcat-seltext_m = 'Field 1 Description'.
wa_fieldcat-emphasize = ''.
wa_fieldcat-hotspot = 'X'.
append wa_fieldcat to it_fieldcat.
clear wa_fieldcat.
wrk_pos = wrk_pos + 1.
wa_fieldcat-col_pos = wrk_pos.
wa_fieldcat-tabname = 'ITAB_UPLOAD'.
wa_fieldcat-fieldname = 'FIELD3'.
wa_fieldcat-seltext_m = 'Field 3 Description'.
wa_fieldcat-emphasize = ''.
wa_fieldcat-hotspot = ''.
append wa_fieldcat to it_fieldcat.
Also refer :
Read a Deep Structure
Programmatically copy a deep structure - exactly.
Regards,
Anish Thomas

Deep Structure - Append and Reading

Hi.....
1) I need Deep Structure Syntax for Appending and Reading..
2) I want append data following Deep Structure...
DATA : BEGIN OF itab1 OCCURS 0,
v1 TYPE i,
v2 TYPE i,
END OF itab1.
TYPES : BEGIN OF stru1,
v1 TYPE i,
v2 TYPE i,
END OF stru1.
DATA itab2 TYPE SORTED TABLE OF stru1 WITH HEADER LINE WITH UNIQUE KEY v1.
DATA : BEGIN OF stru2,
v1 TYPE i,
v2 LIKE TABLE OF itab2,
END OF stru2.
DATA itab3 LIKE STANDARD TABLE OF stru2 WITH HEADER LINE.
DATA : BEGIN OF main,
v1 TYPE i,
v2 TYPE stru1,
v3 LIKE TABLE OF itab1,
v4 LIKE STANDARD TABLE OF itab2, "------> *Here CAN WE SPECIFIES AS SORTED TABLE ..IS IT POSSIBLE?
v4 LIKE SORTED TABLE OF itab2*
v5 LIKE STANDARD TABLE OF itab3,
END OF main.
"main-v1 = 11.
"main-v2-v2 = 21.
thanx....
Edited by: B C Ganesh on Mar 16, 2010 9:44 AM

Hi,
you do READ, APPEND (and other operations on internat table) in the same way on simple internal table like and on internal table which is part of some (deep) structure. You only have to respect names, so instead of
APPEND itab.
you have to do:
APPEND stru1-stru2-stru3-itab.
Regards,
Przemysław

Read Table with Key in a Deep Structure

Hello,
I'd like to read a table while comparing a value in a deep structure. So in the following code the key ID is a deep structure within cs_purchase_order_message-purchase_order-item-value.
For some reason code check returns no errors with the following code, but I get a short dump with a syntax error on id-value when I execute the code.
read table cs_purchase_order_message-purchase_order-item assigning <fs_xml_item> with key id-value = <fs_item>-number_int.
How do I use "with key" when the value is in a deep structure?
Thanks,
Matt

Refer to example link below:
http://sap.ittoolbox.com/groups/technical-functional/sap-dev/read-deep-structure-736023.
Regards,
Venkat.

How to read data from the Deep structure.

Hi
How to get from the deep structure. Means i have one table in that having onother structure. i need to read data from that inner structure.
Regards
Reddy

Hi,
you can access in the way u use for the normal structure, u should only consider a deep structure is a table without headerline.
TABLES: BKPF, BSEG.
TYPES: TY_ITEM TYPE TABLE OF BSEG.
DATA:   BEGIN OF W_DOCUMENT,
                HEADER TYPE BKPF,
                ITEM       TYPE BSEG,
             END    OF W_DOCUMENT.
DATA: T_DOCUMENTS LIKE STANDARD TABLE OF W_DOCUMENT.
Insert the data:
SELECT * FROM BKPF WHERE ....
   W_DOCUMENT-HEADER = BKPF.
   SELECT * FROM BSEG INTO TABLE W_DOCUMENT-ITEM
                                   WHERE BUKRS = BKPF-BUKRS
                                        AND BELNR = BKPF-BELNR
                                        AND GJAHR = BKPF-GJAHR.
   APPEND W_DOCUMENT TO T_DOCUMENTS.
ENDSELECT.
Read the data:
LOOP AT T_DOCUMENTS INTO W_DOCMENT.
Header data
    WRITE: / W_DOCUMENT-HEADER-BUKRS,
                  W_DOCUMENT-HEADER-BELNR,
                  W_DOCUMENT-HEADER-GJAHR.
Item data
    LOOP AT W_DOCUMENT-ITEM INTO BSEG.
         WRITE: / BSEG-BUZEI,
                       BSEG-WRBTR CURRENCY W_DOCUMENT-HEADER-WAERS.
    ENDLOOP.
ENDLOOP.
Regards,
Padmam.

How to read xml with deep structure into intarnal table.

Hi,
Could you pls any body provide xslt code for deep structure convert into internal table.
sample xml file:
- <ns0:CREATIONOFCONTRACT xmlns:ns0="http://BPCreationXSD.CreationOfContract">
- <CREATIONOFCONTRACTDATA>
<RequestType>L0011</RequestType>
<ApplicationId>AN-12</ApplicationId>
<LoanId>QO-22</LoanId>
- <Borrowerguarantorinfo>
<Borrowerbpno>101020</Borrowerbpno>
<Co-borrower1BPNo>101021</Co-borrower1BPNo>
<Co-borrower2BPNo>101022</Co-borrower2BPNo>
<Guarantor1BPNo>101023</Guarantor1BPNo>
<Guarantor2BPNo>101024</Guarantor2BPNo>
<Branch>New Delhi</Branch>
</Borrowerguarantorinfo>
- <Loaninfo>
<Applicationtype>Fresh</Applicationtype>
<Purposeofloan>Home Purchase</Purposeofloan>
<Securedunsecuredflag>Secured</Securedunsecuredflag>
<Loantype>HL with MRTA</Loantype>
<Loancurrency>INR</Loancurrency>
<Loanproduct>MaxiHome Loan Package</Loanproduct>
<Loanscheme>MaxiHome ZEC</Loanscheme>
<Loanamount>1500000.00</Loanamount>
<Loantenure>60</Loantenure>
<Tiered>No</Tiered>
</Loaninfo>
<Periodfrom>01/07/2009</Periodfrom>
<Periodto>16/09/2019</Periodto>
<RateType>Fixed</RateType>
<Ratecode>10.25</Ratecode>
</CREATIONOFCONTRACTDATA>
</ns0:CREATIONOFCONTRACT>

Hi Ramesh,
Thanks for the info,but I found lot of tables unfortunately I am not getting the value for radio buttons. Also I found a FM FIELD_SELECTION_CUSTOMIZE , IMPORT_DYNPRO etc which will call that screen based on profile but it will not store data any where. I found several tables like TCATS, TFAWC, TFAWF, TFAWT etc.But I am not getting the value for raduio buttons.
Thanks & Regards,
Nagaraj Kalbavi

How can i map a file with different structures to several deep structures?

Hey experts,
here is my situation. I have to build a file2file scenario. The file has a flat structure without any separators. Depending on the value of the keyfield, i have to determinate, which kind of structure in the current sequence there is. Like i wrote, there isn't any fieldseparator, but for every possible structure (overall 4 types) i know the type by the length of every field in the structure.
My task is:
1. Read the file into PI and transform to XML
2. Map the flat structure depending on the keyvalue to the deep structure
3. Transform several fields in the different structures like the requirement
4. Write back the file via FTP as the same flat structure as before
Do you have any approach to solve the item number 2 (the other steps are clear for me)?
Do i need several mapping-programs? If so, how can i determinate the right mapping-program, deping on the keyvalue?
Thanks in advance
Tobi

Here the inbound payload:
<?xml version="1.0" encoding="utf-8" ?>
- <ns:MT_MULTI_TYPES xmlns:ns="namespace">
- <VORSATZ>
<ZSATA>0</ZSATA>
<MANDT>001</MANDT>
<BUKRS>0560</BUKRS>
<BLART>8F</BLART>
<BELNR>1816008128</BELNR>
<BUZEI>000</BUZEI>
<ERDAT>20080905</ERDAT>
<UZEIT>000549</UZEIT>
<ZPROG>PGRR3010</ZPROG>
<ZLIEF>T</ZLIEF>
<START>20080905</START>
<ZFILL />
<ZENDE>E</ZENDE>
</VORSATZ>
- <KOPFSATZ>
<ZSATA>1</ZSATA>
<MANDT>001</MANDT>
<BUKRS>0560</BUKRS>
<BLART>8F</BLART>
<BELNR>1816008128</BELNR>
<BUZEI>000</BUZEI>
<BUDAT>20080904</BUDAT>
<BLDAT>20080904</BLDAT>
<XBLNR />
<WAERS />
<HWAE2>EUR</HWAE2>
<HWAE3 />
<KURS2>000000000</KURS2>
<KURS3>000000000</KURS3>
<BKTXT />
<ZFILK />
<ZENDE>E</ZENDE>
</KOPFSATZ>
- <POSITIONSSATZ>
<ZSATA>4</ZSATA>
<MANDT>001</MANDT>
<BUKRS>0560</BUKRS>
<BLART>8F</BLART>
<BELNR>1816008128</BELNR>
<BUZEI>001</BUZEI>
<KOART>S</KOART>
<SHKZG>S</SHKZG>
<NEWKO>30611102</NEWKO>
<GSBER>17AB</GSBER>
<ZUBUK />
<VBUND />
<WRBTR>0000000000000</WRBTR>
<ZBTR1>0000000057576</ZBTR1>
<ZBTR2>0000000000000</ZBTR2>
<ZSTEU />
<VALUT>20080904</VALUT>
<KOSTL />
<AUFNR />
<ZUONR>X4025V64RE460XXXXX</ZUONR>
<SGTXT>REX</SGTXT>
<BEWAR />
<ZFPOS />
<ZENDE>E</ZENDE>
</POSITIONSSATZ>
- <POSITIONSSATZ>
<ZSATA>4</ZSATA>
<MANDT>001</MANDT>
<BUKRS>0560</BUKRS>
<BLART>8F</BLART>
<BELNR>1816008128</BELNR>
<BUZEI>009</BUZEI>
<KOART>S</KOART>
<SHKZG>S</SHKZG>
<NEWKO>20519109</NEWKO>
<GSBER>17AB</GSBER>
<ZUBUK />
<VBUND />
<WRBTR>0000000000000</WRBTR>
<ZBTR1>0000000021070</ZBTR1>
<ZBTR2>0000000000000</ZBTR2>
<ZSTEU />
<VALUT>20080904</VALUT>
<KOSTL />
<AUFNR />
<ZUONR>X4025V64RE460XXXXX</ZUONR>
<SGTXT>REX</SGTXT>
<BEWAR />
<ZFPOS />
<ZENDE>E</ZENDE>
</POSITIONSSATZ>
- <POSITIONSSATZ>
<ZSATA>4</ZSATA>
<MANDT>001</MANDT>
<BUKRS>0560</BUKRS>
<BLART>8F</BLART>
<BELNR>1816008128</BELNR>
<BUZEI>010</BUZEI>
<KOART>S</KOART>
<SHKZG>S</SHKZG>
<NEWKO>20519109</NEWKO>
<GSBER>17AA</GSBER>
<ZUBUK />
<VBUND />
<WRBTR>0000000000000</WRBTR>
<ZBTR1>0000000009796</ZBTR1>
<ZBTR2>0000000000000</ZBTR2>
<ZSTEU />
<VALUT>20080904</VALUT>
<KOSTL />
<AUFNR />
<ZUONR>X4027V63RE460XXXXX</ZUONR>
<SGTXT>REX</SGTXT>
<BEWAR />
<ZFPOS />
<ZENDE>E</ZENDE>
</POSITIONSSATZ>
- <NACHSATZ>
<ZSATA>9</ZSATA>
<MANDT>001</MANDT>
<BUKRS>0560</BUKRS>
<BLART>8F</BLART>
<BELNR>1816008128</BELNR>
<BUZEI>010</BUZEI>
<ERDAT>20080905</ERDAT>
<UZEIT>000549</UZEIT>
<ZPROG>PGRR3010</ZPROG>
<ZZSOL>000000000359502</ZZSOL>
<ZZHAB>000000000359502</ZZHAB>
<ZZBEL>0000001</ZZBEL>
<ZZPOS>000000010</ZZPOS>
<ZFILN />
<ZENDE>E</ZENDE>
</NACHSATZ>
- <VORSATZ>
<ZSATA>0</ZSATA>
<MANDT>001</MANDT>
<BUKRS>0560</BUKRS>
<BLART>8F</BLART>
<BELNR>1816008128</BELNR>
<BUZEI>000</BUZEI>
<ERDAT>20080905</ERDAT>
<UZEIT>000549</UZEIT>
<ZPROG>PGRR3010</ZPROG>
<ZLIEF>T</ZLIEF>
<START>20080905</START>
<ZFILL />
<ZENDE>E</ZENDE>
</VORSATZ>
- <KOPFSATZ>
<ZSATA>1</ZSATA>
<MANDT>001</MANDT>
<BUKRS>0560</BUKRS>
<BLART>8F</BLART>
<BELNR>1816008128</BELNR>
<BUZEI>000</BUZEI>
<BUDAT>20080904</BUDAT>
<BLDAT>20080904</BLDAT>
<XBLNR />
<WAERS />
<HWAE2>EUR</HWAE2>
<HWAE3 />
<KURS2>000000000</KURS2>
<KURS3>000000000</KURS3>
<BKTXT />
<ZFILK />
<ZENDE>E</ZENDE>
</KOPFSATZ>
- <POSITIONSSATZ>
<ZSATA>4</ZSATA>
<MANDT>001</MANDT>
<BUKRS>0560</BUKRS>
<BLART>8F</BLART>
<BELNR>1816008128</BELNR>
<BUZEI>001</BUZEI>
<KOART>S</KOART>
<SHKZG>S</SHKZG>
<NEWKO>30611102</NEWKO>
<GSBER>17AB</GSBER>
<ZUBUK />
<VBUND />
<WRBTR>0000000000000</WRBTR>
<ZBTR1>0000000057576</ZBTR1>
<ZBTR2>0000000000000</ZBTR2>
<ZSTEU />
<VALUT>20080904</VALUT>
<KOSTL />
<AUFNR />
<ZUONR>X4025V64RE460XXXXX</ZUONR>
<SGTXT>REX</SGTXT>
<BEWAR />
<ZFPOS />
<ZENDE>E</ZENDE>
</POSITIONSSATZ>
- <POSITIONSSATZ>
<ZSATA>4</ZSATA>
<MANDT>001</MANDT>
<BUKRS>0560</BUKRS>
<BLART>8F</BLART>
<BELNR>1816008128</BELNR>
<BUZEI>009</BUZEI>
<KOART>S</KOART>
<SHKZG>S</SHKZG>
<NEWKO>20519109</NEWKO>
<GSBER>17AB</GSBER>
<ZUBUK />
<VBUND />
<WRBTR>0000000000000</WRBTR>
<ZBTR1>0000000021070</ZBTR1>
<ZBTR2>0000000000000</ZBTR2>
<ZSTEU />
<VALUT>20080904</VALUT>
<KOSTL />
<AUFNR />
<ZUONR>X4025V64RE460XXXXX</ZUONR>
<SGTXT>REX</SGTXT>
<BEWAR />
<ZFPOS />
<ZENDE>E</ZENDE>
</POSITIONSSATZ>
- <POSITIONSSATZ>
<ZSATA>4</ZSATA>
<MANDT>001</MANDT>
<BUKRS>0560</BUKRS>
<BLART>8F</BLART>
<BELNR>1816008128</BELNR>
<BUZEI>010</BUZEI>
<KOART>S</KOART>
<SHKZG>S</SHKZG>
<NEWKO>20519109</NEWKO>
<GSBER>17AA</GSBER>
<ZUBUK />
<VBUND />
<WRBTR>0000000000000</WRBTR>
<ZBTR1>0000000009796</ZBTR1>
<ZBTR2>0000000000000</ZBTR2>
<ZSTEU />
<VALUT>20080904</VALUT>
<KOSTL />
<AUFNR />
<ZUONR>X4027V63RE460XXXXX</ZUONR>
<SGTXT>REX</SGTXT>
<BEWAR />
<ZFPOS />
<ZENDE>E</ZENDE>
</POSITIONSSATZ>
- <NACHSATZ>
<ZSATA>9</ZSATA>
<MANDT>001</MANDT>
<BUKRS>0560</BUKRS>
<BLART>8F</BLART>
<BELNR>1816008128</BELNR>
<BUZEI>010</BUZEI>
<ERDAT>20080905</ERDAT>
<UZEIT>000549</UZEIT>
<ZPROG>PGRR3010</ZPROG>
<ZZSOL>000000000359502</ZZSOL>
<ZZHAB>000000000359502</ZZHAB>
<ZZBEL>0000001</ZZBEL>
<ZZPOS>000000010</ZZPOS>
<ZFILN />
<ZENDE>E</ZENDE>
</NACHSATZ>
</ns:MT_MULTI_TYPES>
And here the outbound payload:
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_MULTI_TYPES xmlns:ns0="namespace">
- <VORSATZ>
<ZSATA>0</ZSATA>
<MANDT>001</MANDT>
<BUKRS>0560</BUKRS>
<BLART>8F</BLART>
<BELNR>1816008128</BELNR>
<BUZEI>000</BUZEI>
<ERDAT>20080905</ERDAT>
<UZEIT>000549</UZEIT>
<ZPROG>PGRR3010</ZPROG>
<ZLIEF>T</ZLIEF>
<START>20080905</START>
<ZFILL />
<ZENDE>E</ZENDE>
</VORSATZ>
- <VORSATZ>
<ZSATA>0</ZSATA>
<MANDT>001</MANDT>
<BUKRS>0560</BUKRS>
<BLART>8F</BLART>
<BELNR>1816008128</BELNR>
<BUZEI>000</BUZEI>
<ERDAT>20080905</ERDAT>
<UZEIT>000549</UZEIT>
<ZPROG>PGRR3010</ZPROG>
<ZLIEF>T</ZLIEF>
<START>20080905</START>
<ZFILL />
<ZENDE>E</ZENDE>
</VORSATZ>
- <KOPFSATZ>
<ZSATA>1</ZSATA>
<MANDT>001</MANDT>
<BUKRS>0560</BUKRS>
<BLART>8F</BLART>
<BELNR>1816008128</BELNR>
<BUZEI>000</BUZEI>
<BUDAT>20080904</BUDAT>
<BLDAT>20080904</BLDAT>
<XBLNR />
<WAERS />
<HWAE2>EUR</HWAE2>
<HWAE3 />
<KURS2>000000000</KURS2>
<KURS3>000000000</KURS3>
<BKTXT />
<ZFILK />
<ZENDE>E</ZENDE>
</KOPFSATZ>
- <KOPFSATZ>
<ZSATA>1</ZSATA>
<MANDT>001</MANDT>
<BUKRS>0560</BUKRS>
<BLART>8F</BLART>
<BELNR>1816008128</BELNR>
<BUZEI>000</BUZEI>
<BUDAT>20080904</BUDAT>
<BLDAT>20080904</BLDAT>
<XBLNR />
<WAERS />
<HWAE2>EUR</HWAE2>
<HWAE3 />
<KURS2>000000000</KURS2>
<KURS3>000000000</KURS3>
<BKTXT />
<ZFILK />
<ZENDE>E</ZENDE>
</KOPFSATZ>
- <POSITIONSSATZ>
<ZSATA>4</ZSATA>
<MANDT>001</MANDT>
<BUKRS>0560</BUKRS>
<BLART>8F</BLART>
<BELNR>1816008128</BELNR>
<BUZEI>001</BUZEI>
<KOART>S</KOART>
<SHKZG>S</SHKZG>
<NEWKO>30611102</NEWKO>
<GSBER>17AB</GSBER>
<ZUBUK />
<VBUND />
<WRBTR>0000000000000</WRBTR>
<ZBTR1>0000000057576</ZBTR1>
<ZBTR2>0000000000000</ZBTR2>
<ZSTEU />
<VALUT>20080904</VALUT>
<KOSTL />
<AUFNR />
<ZUONR>X4025V64RE460XXXXX</ZUONR>
<SGTXT>REX</SGTXT>
<BEWAR />
<ZFPOS />
<ZENDE>E</ZENDE>
</POSITIONSSATZ>
- <POSITIONSSATZ>
<ZSATA>4</ZSATA>
<MANDT>001</MANDT>
<BUKRS>0560</BUKRS>
<BLART>8F</BLART>
<BELNR>1816008128</BELNR>
<BUZEI>009</BUZEI>
<KOART>S</KOART>
<SHKZG>S</SHKZG>
<NEWKO>20519109</NEWKO>
<GSBER>17AB</GSBER>
<ZUBUK />
<VBUND />
<WRBTR>0000000000000</WRBTR>
<ZBTR1>0000000021070</ZBTR1>
<ZBTR2>0000000000000</ZBTR2>
<ZSTEU />
<VALUT>20080904</VALUT>
<KOSTL />
<AUFNR />
<ZUONR>X4025V64RE460XXXXX</ZUONR>
<SGTXT>REX</SGTXT>
<BEWAR />
<ZFPOS />
<ZENDE>E</ZENDE>
</POSITIONSSATZ>
- <POSITIONSSATZ>
<ZSATA>4</ZSATA>
<MANDT>001</MANDT>
<BUKRS>0560</BUKRS>
<BLART>8F</BLART>
<BELNR>1816008128</BELNR>
<BUZEI>010</BUZEI>
<KOART>S</KOART>
<SHKZG>S</SHKZG>
<NEWKO>20519109</NEWKO>
<GSBER>17AA</GSBER>
<ZUBUK />
<VBUND />
<WRBTR>0000000000000</WRBTR>
<ZBTR1>0000000009796</ZBTR1>
<ZBTR2>0000000000000</ZBTR2>
<ZSTEU />
<VALUT>20080904</VALUT>
<KOSTL />
<AUFNR />
<ZUONR>X4027V63RE460XXXXX</ZUONR>
<SGTXT>REX</SGTXT>
<BEWAR />
<ZFPOS />
<ZENDE>E</ZENDE>
</POSITIONSSATZ>
- <POSITIONSSATZ>
<ZSATA>4</ZSATA>
<MANDT>001</MANDT>
<BUKRS>0560</BUKRS>
<BLART>8F</BLART>
<BELNR>1816008128</BELNR>
<BUZEI>001</BUZEI>
<KOART>S</KOART>
<SHKZG>S</SHKZG>
<NEWKO>30611102</NEWKO>
<GSBER>17AB</GSBER>
<ZUBUK />
<VBUND />
<WRBTR>0000000000000</WRBTR>
<ZBTR1>0000000057576</ZBTR1>
<ZBTR2>0000000000000</ZBTR2>
<ZSTEU />
<VALUT>20080904</VALUT>
<KOSTL />
<AUFNR />
<ZUONR>X4025V64RE460XXXXX</ZUONR>
<SGTXT>REX</SGTXT>
<BEWAR />
<ZFPOS />
<ZENDE>E</ZENDE>
</POSITIONSSATZ>
- <POSITIONSSATZ>
<ZSATA>4</ZSATA>
<MANDT>001</MANDT>
<BUKRS>0560</BUKRS>
<BLART>8F</BLART>
<BELNR>1816008128</BELNR>
<BUZEI>009</BUZEI>
<KOART>S</KOART>
<SHKZG>S</SHKZG>
<NEWKO>20519109</NEWKO>
<GSBER>17AB</GSBER>
<ZUBUK />
<VBUND />
<WRBTR>0000000000000</WRBTR>
<ZBTR1>0000000021070</ZBTR1>
<ZBTR2>0000000000000</ZBTR2>
<ZSTEU />
<VALUT>20080904</VALUT>
<KOSTL />
<AUFNR />
<ZUONR>X4025V64RE460XXXXX</ZUONR>
<SGTXT>REX</SGTXT>
<BEWAR />
<ZFPOS />
<ZENDE>E</ZENDE>
</POSITIONSSATZ>
- <POSITIONSSATZ>
<ZSATA>4</ZSATA>
<MANDT>001</MANDT>
<BUKRS>0560</BUKRS>
<BLART>8F</BLART>
<BELNR>1816008128</BELNR>
<BUZEI>010</BUZEI>
<KOART>S</KOART>
<SHKZG>S</SHKZG>
<NEWKO>20519109</NEWKO>
<GSBER>17AA</GSBER>
<ZUBUK />
<VBUND />
<WRBTR>0000000000000</WRBTR>
<ZBTR1>0000000009796</ZBTR1>
<ZBTR2>0000000000000</ZBTR2>
<ZSTEU />
<VALUT>20080904</VALUT>
<KOSTL />
<AUFNR />
<ZUONR>X4027V63RE460XXXXX</ZUONR>
<SGTXT>REX</SGTXT>
<BEWAR />
<ZFPOS />
<ZENDE>E</ZENDE>
</POSITIONSSATZ>
- <NACHSATZ>
<ZSATA>9</ZSATA>
<MANDT>001</MANDT>
<BUKRS>0560</BUKRS>
<BLART>8F</BLART>
<BELNR>1816008128</BELNR>
<BUZEI>010</BUZEI>
<ERDAT>20080905</ERDAT>
<UZEIT>000549</UZEIT>
<ZPROG>PGRR3010</ZPROG>
<ZZSOL>000000000359502</ZZSOL>
<ZZHAB>000000000359502</ZZHAB>
<ZZBEL>0000001</ZZBEL>
<ZZPOS>000000010</ZZPOS>
<ZFILN />
<ZENDE>E</ZENDE>
</NACHSATZ>
- <NACHSATZ>
<ZSATA>9</ZSATA>
<MANDT>001</MANDT>
<BUKRS>0560</BUKRS>
<BLART>8F</BLART>
<BELNR>1816008128</BELNR>
<BUZEI>010</BUZEI>
<ERDAT>20080905</ERDAT>
<UZEIT>000549</UZEIT>
<ZPROG>PGRR3010</ZPROG>
<ZZSOL>000000000359502</ZZSOL>
<ZZHAB>000000000359502</ZZHAB>
<ZZBEL>0000001</ZZBEL>
<ZZPOS>000000010</ZZPOS>
<ZFILN />
<ZENDE>E</ZENDE>
</NACHSATZ>
</ns0:MT_MULTI_TYPES>

XSLT and ABAP Transformation Deep Structure

Hello Everyone,
While I've read the forums and the links of a number of folks doing the same thing. I am stuck in that I cannot figure out how to populate a deep structure via XSLT. Not sure what is going wrong, but I suspect it is obvious. The simple problem is that my structure is not getting populated. It is blank. The transformation works in testing STRANS (and in Stylus Studio).
I cannot figure out what is wrong that makes the t_pexr2002 table blank. Thanks for any insight.
Greg
The simple program is:
TYPES: BEGIN OF ty_head,
 sndprn TYPE string,
 bgmref TYPE string,
 moabetrh TYPE string,
 create_date TYPE string,
 settlement_date TYPE string,
 no_lines TYPE string,
 END OF ty_head.
TYPES: BEGIN OF ty_pricing,
 moabetr TYPE string,
 END OF ty_pricing.
TYPES: BEGIN OF ty_item,
 docname TYPE string,
 docnummr TYPE string,
 pricing TYPE ty_pricing,
 END OF ty_item.
TYPES: BEGIN OF ty_summary,
 status_message TYPE string,
 END OF ty_summary.
TYPES: BEGIN OF ty_mn,
 header_data TYPE ty_head,
 item_data TYPE ty_item,
 summary_data TYPE ty_summary,
 END OF ty_mn.
DATA: t_pexr2002 TYPE STANDARD TABLE OF ty_mn.
DATA: xml_doc TYPE REF TO cl_xml_document, xml TYPE string.
CREATE OBJECT xml_doc.
CALL METHOD xml_doc->import_from_file
EXPORTING
 filename = 'C:\temp\2640273.xml'.
CALL METHOD xml_doc->render_2_string
EXPORTING
 pretty_print = 'X'
IMPORTING
 stream = xml.
CALL TRANSFORMATION zusl_pexr2002_v1
SOURCE XML xml
RESULT output = t_pexr2002.
Edited by: Thomas Zloch on Jun 9, 2010 6:05 PM

Here is my XSLT:
Here is the transformation: Also pretty simple...
<xsl:transform xmlns:xsl="http://www.w3.org/1999/XSL/Transform" ... >
<xsl:strip-space elements="*"/>
<xsl:template match="/PEXR2002/IDOC">
 <asx:abap xmlns:asx="http://www.sap.com/abapxml" version="1.0">
 <asx:values>
 <OUTPUT>
 <HEADER_DATA>
 <SNDPRN>
 <xsl:value-of select="EDI_DC40/SNDPRN"/>
 </SNDPRN>
 <BGMREF>
 <xsl:value-of select="E1IDKU1/BGMREF"/>
 </BGMREF>
 <MOABETRH>
 <xsl:value-of select="E1IDKU5/MOABETR"/>
 </MOABETRH>
 <CREATE_DATE>
 <xsl:value-of select="EDI_DC40/CREDAT"/>
 </CREATE_DATE>
 <SETTLEMENT_DATE>
 <xsl:value-of select="E1EDK03/DATUM"/>
 </SETTLEMENT_DATE>
 <NO_LINES>
 <xsl:value-of select="count(E1IDPU1)"/>
 </NO_LINES>
 </HEADER_DATA>
 <ITEM_DATA>
 <xsl:for-each select="E1IDPU1">
 <DOCNAME>
 <xsl:value-of select="DOCNAME"/>
 </DOCNAME>
 <DOCNUMMR>
 <xsl:value-of select="DOCNUMMR"/>
 </DOCNUMMR>
 <PRICING_DATA>
 <xsl:for-each select="E1IDPU5[MOAQUAL = '006']">
 <MOABETR>
 <xsl:value-of select="MOABETR"/>
 </MOABETR>
 </xsl:for-each>
 </PRICING_DATA>
 </xsl:for-each>
 </ITEM_DATA>
 <SUMMARY_DATA>
 <xsl:for-each select="EDI_DS40">
 <STATUS_MESSAGE>
 <xsl:value-of select="STAPA1"/>
 </STATUS_MESSAGE>
 </xsl:for-each>
 </SUMMARY_DATA>
 </OUTPUT>
 </asx:values>
 </asx:abap>
</xsl:template>
</xsl:transform>
Edited by: Thomas Zloch on Jun 9, 2010 6:05 PM

How to use STRANS to translate XML to ABAP with deep structure

every experts, I want to use Tcode: STRANS to translate XML to ABAP, But it does not work well,
here is XML code，I want to translate this XML into an an Inter table gt_orders with deep structure of oeb, and colum oeb is also and intertable,how can I do this.
<?xml version="1.0" encoding="gb2312" ?><axmt410><ObjectID>setSalesOrder</ObjectID><azp01>000000</azp01><oea00>1</oea00><ta_oeaecn>SO-140227-3041</ta_oeaecn><oea03>25325017</oea03><oea02>2014-02-27 17:44:44.0</oea02><ta_oea002>2763.0</ta_oea002><ta_oea001>0.0</ta_oea001><oea14></oea14><oea15>25325017</oea15><oea23>RMB</oea23><oeaconf>S3</oeaconf><oea10></oea10><oeaud01>null</oeaud01><ta_oea007></ta_oea007><oea25>101</oea25><ta_oea008>0</ta_oea008><ta_oea009>null</ta_oea009><oeauser>Hanjingya</oeauser><ta_oeanday>2014-02-27 17:44:44.991</ta_oeanday><ta_oeamday>2014-02-28 08:30:14.866</ta_oeamday><ta_oeacday>2014-02-28 08:30:14.866</ta_oeacday><oeaud02>0</oeaud02><ta_oea030>null</ta_oea030><oeb><oeb03>1</oeb03><oeb04>7400208249</oeb04><oeb05>PCS</oeb05><oeb17>921.0</oeb17><oeb13>921.0</oeb13><oeb15></oeb15><oeb12>5</oeb12><oeb09>990001</oeb09><ta_oeb001></ta_oeb001><ta_oeb002>Yunnan</ta_oeb002><ta_oeb003>address1</ta_oeb003><ta_oeb004>zhangdagui、zhanglan</ta_oeb004><ta_oeb005>15974749998、15987782008</ta_oeb005><ta_oeb006>address and street</ta_oeb006><oebud01></oebud01></oeb><oeb><oeb03>2</oeb03><oeb04>7400208250</oeb04><oeb05>PCS</oeb05><oeb17>921.0</oeb17><oeb13>921.0</oeb13><oeb15></oeb15><oeb12>5</oeb12><oeb09>990001</oeb09><ta_oeb001></ta_oeb001><ta_oeb002>Yunnan</ta_oeb002><ta_oeb003>address2</ta_oeb003><ta_oeb004>zhangdagui、chenlan</ta_oeb004><ta_oeb005>15974749998、15987782008</ta_oeb005><ta_oeb006>address and street</ta_oeb006><oebud01></oebud01></oeb></axmt410>
I write these codes in SAP XSLT editor
<xsl:transform xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0">
 <xsl:output encoding="iso-8859-1" indent="yes" method="xml" version="1.0"/>
 <xsl:strip-space elements="*"/>
 <xsl:strip-space elements="*"/>
 <xsl:template match="/">
 <asx:abap xmlns:asx="http://www.sap.com/abapxml" version="1.0">
 <asx:values>
 <ORDERS>
 <xsl:apply-templates select="//axmt410"/>
 </ORDERS>
 </asx:values>
 </asx:abap>
 </xsl:template>
 <xsl:template match="axmt410">
 <OBJECTID>
 <xsl:value-of select="ObjectID"/>
 </OBJECTID>
 <AZP01>
 <xsl:value-of select="azp01"/>
 </AZP01>
 <OEA00>
 <xsl:value-of select="oea00"/>
 </OEA00>
 <TA_OEAECN>
 <xsl:value-of select="ta_oeaecn"/>
 </TA_OEAECN>
 <OEA03>
 <xsl:value-of select="oea03"/>
 </OEA03>
 <OEA05>
 <xsl:value-of select="oea05"/>
 </OEA05>
 <OEA02>
 <xsl:value-of select="oea02"/>
 </OEA02>
 <TA_OEA002>
 <xsl:value-of select="ta_oea002"/>
 </TA_OEA002>
 <TA_OEA001>
 <xsl:value-of select="ta_oea001"/>
 </TA_OEA001>
 <OEA14>
 <xsl:value-of select="ora14"/>
 </OEA14>
 <OEA15>
 <xsl:value-of select="ora15"/>
 </OEA15>
 <OEA23>
 <xsl:value-of select="ora23"/>
 </OEA23>
 <OEACONF>
 <xsl:value-of select="oeaconf"/>
 </OEACONF>
 <OEA10>
 <xsl:value-of select="ora10"/>
 </OEA10>
 <OEAUD01>
 <xsl:value-of select="oeaud01"/>
 </OEAUD01>
 <TA_OEA007>
 <xsl:value-of select="ta_oea007"/>
 </TA_OEA007>
 <OEA25>
 <xsl:value-of select="ora25"/>
 </OEA25>
 <TA_OEA008>
 <xsl:value-of select="ta_oea008"/>
 </TA_OEA008>
 <TA_OEA009>
 <xsl:value-of select="ta_oea009"/>
 </TA_OEA009>
 <TA_OEA013>
 <xsl:value-of select="ta_oea013"/>
 </TA_OEA013>
 <TA_OEA014>
 <xsl:value-of select="ta_oea014"/>
 </TA_OEA014>
 <TA_OEA015>
 <xsl:value-of select="ta_oea015"/>
 </TA_OEA015>
 <TA_OEA016>
 <xsl:value-of select="ta_oea016"/>
 </TA_OEA016>
 <TA_OEA017>
 <xsl:value-of select="ta_oea017"/>
 </TA_OEA017>
 <TA_OEA018>
 <xsl:value-of select="ta_oea018"/>
 </TA_OEA018>
 <TA_OEA019>
 <xsl:value-of select="ta_oea019"/>
 </TA_OEA019>
 <TA_OEA020>
 <xsl:value-of select="ta_oea020"/>
 </TA_OEA020>
 <TA_OEA021>
 <xsl:value-of select="ta_oea021"/>
 </TA_OEA021>
 <TA_OEA022>
 <xsl:value-of select="ta_oea022"/>
 </TA_OEA022>
 <TA_OEA028>
 <xsl:value-of select="ta_oea028"/>
 </TA_OEA028>
 <OEAUSER>
 <xsl:value-of select="oeauser"/>
 </OEAUSER>
 <TA_OEANDAY>
 <xsl:value-of select="ta_oeanday"/>
 </TA_OEANDAY>
 <TA_OEAMDAY>
 <xsl:value-of select="ta_oeamday"/>
 </TA_OEAMDAY>
 <TA_OEACDAY>
 <xsl:value-of select="ta_oeacday"/>
 </TA_OEACDAY>
 <OEAUD02>
 <xsl:value-of select="oeaud02"/>
 </OEAUD02>
 <TA_OEA030>
 <xsl:value-of select="ta_oea030"/>
 </TA_OEA030>
 <OEB>
 <xsl:for-each select="oeb">
 <OEB03>
 <xsl:value-of select="oeb03"/>
 </OEB03>
 <OEB04>
 <xsl:value-of select="oeb04"/>
 </OEB04>
 <OEB05>
 <xsl:value-of select="oeb05"/>
 </OEB05>
 <OEB17>
 <xsl:value-of select="oeb17"/>
 </OEB17>
 <OEB13>
 <xsl:value-of select="oeb13"/>
 </OEB13>
 <OEB15>
 <xsl:value-of select="oeb15"/>
 </OEB15>
 <OEB12>
 <xsl:value-of select="oeb12"/>
 </OEB12>
 <OEB09>
 <xsl:value-of select="oeb09"/>
 </OEB09>
 <TA_OEB001>
 <xsl:value-of select="ta_oeb001"/>
 </TA_OEB001>
 <TA_OEB002>
 <xsl:value-of select="ta_oeb002"/>
 </TA_OEB002>
 <TA_OEB003>
 <xsl:value-of select="ta_oeb003"/>
 </TA_OEB003>
 <TA_OEB004>
 <xsl:value-of select="ta_oeb004"/>
 </TA_OEB004>
 <TA_OEB005>
 <xsl:value-of select="ta_oeb005"/>
 </TA_OEB005>
 <TA_OEB006>
 <xsl:value-of select="ta_oeb006"/>
 </TA_OEB006>
 <OEBUD01>
 <xsl:value-of select="oebud01"/>
 </OEBUD01>
 </xsl:for-each>
 </OEB>
 </xsl:template>
</xsl:transform>
and I use below ABAP program for a test, but the items from XML can not translate into Interner table gt_orders-oeb[]
TYPE-POOLS abap.
CONSTANTS gs_file TYPE string VALUE 'C:\temp\order02.xml'.
* This is the structure for the data from the XML file
TYPES:
 BEGIN OF typ_s_oeb,
 oeb03 TYPE string, "
 oeb04 TYPE string, "
 oeb05 TYPE string, "
 oeb17 TYPE string, "
 oeb13 TYPE string,
 oeb15 TYPE string,
 oeb12 TYPE string, "
 oeb09 TYPE string, "
 ta_oeb001 TYPE string, "
 ta_oeb002 TYPE string, "
 ta_oeb003 TYPE string, "
 ta_oeb004 TYPE string, "
 ta_oeb005 TYPE string, "
 ta_oeb006 TYPE string, "
 ta_oeb013 TYPE string, "
 ta_oeb014 TYPE string, "
 ta_oeb015 TYPE string, "
 ta_oeb016 TYPE string, "
 ta_oeb017 TYPE string, "
 ta_oeb018 TYPE string, "
 ta_oeb019 TYPE string, "
 ta_oeb020 TYPE string, "
 ta_oeb021 TYPE string, "
 ta_oeb022 TYPE string, "
 oebud01 TYPE string, "
 END OF typ_s_oeb.
TYPES: typ_t_oeb TYPE TABLE OF typ_s_oeb WITH KEY oeb03.
TYPES:
 BEGIN OF typ_s_order,
 objectid TYPE string, "
 azp01 TYPE string, "
 oea00 TYPE string, "
 ta_oeaecn TYPE string, "
 oea03 TYPE string, "
 oea02 TYPE string, "
 ta_oea002 TYPE string, "
 ta_oea001 TYPE string, "
 oea14 TYPE string, "
 oea15 TYPE string,
 oea23 TYPE string, "
 oeaconf TYPE string, "
 oea10 TYPE string, "
 oeaud01 TYPE string, "
 ta_oea007 TYPE string, "
 oea25 TYPE string, "
 ta_oea008 TYPE string, "
 ta_oea009 TYPE string, "
 oeauser TYPE string, "
 ta_oeanday TYPE string, "
 ta_oeamday TYPE string, "
 ta_oeacday TYPE string, "
 oeaud02 TYPE string, "
 ta_oea030 TYPE string, "
 ta_oea013 TYPE string,
 ta_oea014 TYPE string,
 ta_oea015 TYPE string,
 ta_oea016 TYPE string,
 ta_oea017 TYPE string,
 ta_oea018 TYPE string,
 ta_oea019 TYPE string,
 ta_oea020 TYPE string,
 ta_oea021 TYPE string,
 ta_oea022 TYPE string,
 ta_oea025 TYPE string,
 oeb TYPE typ_t_oeb,
 END OF typ_s_order.
* Table for the XML content
DATA: gt_itab TYPE STANDARD TABLE OF char2048,
 gs_itab LIKE LINE OF gt_itab.
* Table and work ares for the data from the XML file
DATA: gt_orders TYPE STANDARD TABLE OF typ_s_order,
 gs_orders TYPE typ_s_order.
* Result table that contains references
* of the internal tables to be filled
DATA: gt_result_xml TYPE abap_trans_resbind_tab,
 gs_result_xml TYPE abap_trans_resbind.
* For error handling
DATA: gs_rif_ex TYPE REF TO cx_root,
 gs_var_text TYPE string.
* Get the XML file from your client
CALL METHOD cl_gui_frontend_services=>gui_upload
 EXPORTING
 filename = gs_file
 CHANGING
 data_tab = gt_itab
 EXCEPTIONS
 file_open_error = 1
 file_read_error = 2
 no_batch = 3
 gui_refuse_filetransfer = 4
 invalid_type = 5
 no_authority = 6
 unknown_error = 7
 bad_data_format = 8
 header_not_allowed = 9
 separator_not_allowed = 10
 header_too_long = 11
 unknown_dp_error = 12
 access_denied = 13
 dp_out_of_memory = 14
 disk_full = 15
 dp_timeout = 16
 not_supported_by_gui = 17
 error_no_gui = 18
 OTHERS = 19.
IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
* Fill the result table with a reference to the data table.
* Within the XSLT stylesheet, the data table can be accessed with
* "IPERSON".
GET REFERENCE OF gt_orders INTO gs_result_xml-value.
gs_result_xml-name = 'ORDERS'.
APPEND gs_result_xml TO gt_result_xml.
* Perform the XSLT styleshee
TRY.
 CALL TRANSFORMATION zfx_so_xml_to_abap
 SOURCE XML gt_itab
 RESULT (gt_result_xml).
 CATCH cx_root INTO gs_rif_ex.
 gs_var_text = gs_rif_ex->get_text( ).
 MESSAGE gs_var_text TYPE 'S'.
ENDTRY.
LOOP AT gt_orders INTO gs_orders.
ENDLOOP.

The simplest way seems to me is to use a XSL file for that. The <xsl:output> attributes doctype-system and doctype-public generate the DTD declaration <!DOCTYPE YOUR_ROOT SYSTEM "yourDTDfile.dtd"> and <!DOCTYPE YOUR_ROOT PUBLIC "yourDTDfile.dtd">, respectively.
When calling transformerInstance.transform() the XSLT processor performs the identity transformation - it just copies elements, attributes, content, processing instructions and comments to the result stream.
If you're using an xsl file for your transformation already, simply add <xsl:output doctype-system="yourDTDfile.dtd"/> to your existing XSL file.
If you're only using the identity transformation you'd need to change the line of code where you obtain the transformer instance from the TransformerFactory to:
t_factory.newTransformer(new StreamSource("test.xsl"));
and use this as test.xsl:
<?xml version="1.0"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
 <xsl:output doctype-system="yourDTDfile.dtd"/>
 
 <xsl:template match="*|@*|comment()|processing-instruction()|text()">
 <xsl:copy>
 <xsl:apply-templates select="*|@*|comment()|processing-instruction()|text()"/>
 </xsl:copy>
 </xsl:template>
</xsl:stylesheet>Good luck.

File content conversion : Deep Structure

Hi,
I have to do a file conversion(receiver file adapter) of an xml file which has a structure
<root>
<header>
<recordtype>H</recordtype>
</header>
<company>
<recordtype>C</recordtype>
<companycode>001</companycode>
<detail>
 <recordtype>D</recordtype>
 <customer>c1</customer>
</detail>
<detail>
 <recordtype>D</recordtype>
 <customer>c2</customer>
</detail>
</company>
<company>
<recordtype>C</recordtype>
<companycode>002</companycode>
<detail>
 <recordtype>D</recordtype>
 <customer>c3</customer>
</detail>
<detail>
 <recordtype>D</recordtype>
 <customer>c4</customer>
</detail>
</company>
<trailer>
<recordtype>T</recordtype>
</trailer>
</root>
I would like to convert it into
H
C001
DC1
DC2
C002
DC3
DC4
T
This is what i put in the
content conversion parameters..
HEADER,COMPANY,DETAIL,TRAILER
HEADER.fieldFixedLengths 1
COMPANY.fieldFixedLengths 1,3
DETAIL.fieldFixedLengths 1,2
TRAILER.fieldFixedLengths 1
the file adapter failed during conversion.
I am just wondering if it is to do with the deep structures
ANY THOUGTHS....

what do you mean by target structure.the mapped structure or the final file that is written to the FTP Folder.
the mapped structure is a treee
<root>
<header>
<recordtype>H</recordtype>
</header>
<company>
<recordtype>C</recordtype>
<companycode>001</companycode>
<detail>
<recordtype>D</recordtype>
<customer>c1</customer>
</detail>
<detail>
<recordtype>D</recordtype>
<customer>c2</customer>
</detail>
</company>
<company>
<recordtype>C</recordtype>
<companycode>002</companycode>
<detail>
<recordtype>D</recordtype>
<customer>c3</customer>
</detail>
<detail>
<recordtype>D</recordtype>
<customer>c4</customer>
</detail>
</company>
<trailer>
<recordtype>T</recordtype>
</trailer>
</root>
with the company 1 to unbounded
under which there can be multiple details...

To create a deep structure for dynamic internal table.

Hello
My ALV has fields which are defined dynamically during execution.
so, i did it in the following way,
Declared Field symbolds, DREF and fieldcatalog as,
FIELD-SYMBOLS: <t_dyntable> TYPE STANDARD TABLE,
 <fs_dyntable>.
DATA: dref_dyntab TYPE REF TO data,
 dref_dynwa TYPE REF TO data.
DATA: ts_fieldcatalog TYPE lvc_t_fcat.
DATA: wa_fieldcatalog TYPE lvc_s_fcat.
Updated Fieldcatalog dynamically as,
*function module to read segment structure
 CALL FUNCTION 'SEGMENT_READ'
 EXPORTING
 segmenttyp = v_segment_name
 TABLES
 segmentstructure = ts_seg_structure
 EXCEPTIONS
 no_authority = 1
 segment_not_existing = 2
 OTHERS = 3.
 IF sy-subrc <> 0.
 CASE sy-subrc.
 WHEN '1'.
 MESSAGE e024.
 STOP.
 WHEN '2'.
 MESSAGE e025 WITH v_segment_name.
 STOP.
 WHEN OTHERS.
 MESSAGE e023.
 ENDCASE.
 ENDIF.
*FETCH FIELDS FROM STRUCTURE OF SEGMENT AND CREATE FIELDCATALOG FOR
EACH FIELD OF SEGMENT (DYNAMIC FIELD CATALOG)
 LOOP AT ts_seg_structure INTO wa_seg_structure.
 ADD 1 TO v_counter.
 wa_fieldcatalog-fieldname = wa_seg_structure-fieldname.
 wa_fieldcatalog-col_pos = v_counter.
 wa_fieldcatalog-ref_table = wa_seg_structure-segtyp.
 APPEND wa_fieldcatalog TO ts_fieldcatalog.
 CLEAR wa_fieldcatalog.
 ENDLOOP.
and generated dynamic internal table using fieldcatalog as,
*--Method to get the structure of table using fieldcatalog.
CALL METHOD cl_alv_table_create=>create_dynamic_table
 EXPORTING
 it_fieldcatalog = ts_fieldcatalog
 IMPORTING
*--Variable of type REF TO DATA.
 ep_table = dref_dyntab.
IF sy-subrc <> 0.
 MESSAGE e023.
ENDIF.
*--Dynamic internal tables required when show segments selected
IF p_selseg IS NOT INITIAL.
 ASSIGN dref_dyntab->* TO <t_dyntable>.
*--Create dynamic work area and assign to FS
CREATE DATA dref_dynwa LIKE LINE OF <t_dyntable>.
 ASSIGN dref_dynwa->* TO <fs_dyntable>.
And then i populated this <t_dyntable> which is being passed as data-table to method
CL_GUI_ALV_GRID => SET_TABLE_FOR_FIRST_DISPLAY
for ALV grid Display along with above used filedcatalog ts_fieldcatalog.
Things are fine till here, but now i have the requirement to edit selected rows of the ALV display..
As you might be aware, we need a field
 TS_STYLEROW TYPE lvc_t_styl, (i.e, a field of type 'h' and we can say as an internal table inside an internal table or else as a deep structure)
in the output internal table <t_dyntable> to meet our requirement.
My issue is about declaring one such field of type 'h' in this dynamically created internal table ''<t_dyntable>".
I tried in the following way by adding one such field to fieldcatalog :
*Field for Styling
ADD 1 TO v_counter.
wa_fieldcatalog-fieldname = 'TS_STYLEROW'.
wa_fieldcatalog-tabname = 'TS_STYLE'.
wa_fieldcatalog-col_pos = v_counter.
wa_fieldcatalog-no_out = 'X'.
wa_fieldcatalog-inttype = 'h'. " I even mentioned this
APPEND wa_fieldcatalog TO ts_fieldcatalog.
CLEAR wa_fieldcatalog.
But this is creating a field of type 'C' in the table <t_dyntable> instead of what i was expecting
Guyz and respected,
Please advice me with the solution or ur ideas....
Note : The overall requirement is create a deep structure for dynamically generated internal table.
Your help is highly appreciated and unforgettable..!!!!!!!

hi,
Dynamic append
Dynamic internal table
Dynamic internal table
dynamic columns in ALV
Variant for dynamic selection
thanks

Selecting into an internal table with deep structure

Hi,
I am working in ECC 6.0 now and it is giving me a syntax error for the following code.
types: tt_bdc type standard table of bdcmsgcoll
      with default key.
data: begin of t_test occurs 0,
        vbeln like vbak-vbeln,
        tab   type tt_bdc,
      end of t_test.
select vbeln from vbak into table t_test
where aedat > '20081101'.
The error is:
+The work area (or internal table) "T_TEST" is not flat, or contains
reference or internal tables as components . components. components.
components. components.+
I've done this in countless other programs in the past. How can I use a deep structure this way? What am I missing?
Thanks very much!

Will this solve ur requirement -
types: tt_bdc type standard table of bdcmsgcoll
      with default key.
data: begin of t_test occurs 0,
        vbeln like vbak-vbeln,
        tab   type tt_bdc,
      end of t_test.
select vbeln from vbak into
CORRESPONDING FIELDS OF TABLE t_test
where aedat > '20081101'.

Dynamic Table - Deep Structure

Hi Gurus,
this is my first posting, so be patient!
I want to create a deep structure dynamic table via method
cl_alv_table_create=>create_dynamic_table, is this possible? Are there tricks to make it happen?
Background: i wanna create an alv with dynamic fieldcatalalog, in this case i want to colour special fields, which is done by lvc_s_layo-?csp_fieldname? in combination with a field in my internal table which is typed ?lvc_t_scol?. Is this possible under 6.2.43
thanxs for your replies
juergen
- ?i dont actually know by rote the correct fieldnames of lvc_xxxxx?

Hi Jurgen, I took on the challenge. This program provides a dynamic table with the ability to set the colors of the cells.
Create the structure ZCDF_CELL_COLOR in the dictionary as described in the program.
Create screen 100 as empty, with next screen set to 0, and the following flow logic:
PROCESS BEFORE OUTPUT.
MODULE initialization.
PROCESS AFTER INPUT.
REPORT zcdf_dynamic_table.
* Dynamic ALV Grid with Cell Coloring
DATA:
r_dyn_table TYPE REF TO data,
r_wa_dyn_table TYPE REF TO data,
r_dock_ctnr TYPE REF TO cl_gui_docking_container,
r_alv_grid TYPE REF TO cl_gui_alv_grid,
t_fieldcat1 TYPE lvc_t_fcat, "with cell color
t_fieldcat2 TYPE lvc_t_fcat, "without cell color
wa_fieldcat LIKE LINE OF t_fieldcat1,
wa_cellcolors TYPE LINE OF lvc_t_scol,
wa_is_layout TYPE lvc_s_layo.
FIELD-SYMBOLS:
<t_dyn_table> TYPE STANDARD TABLE,
<wa_dyn_table> TYPE ANY,
<t_cellcolors> TYPE lvc_t_scol,
<w_field> TYPE ANY.
START-OF-SELECTION.
* Build field catalog based on your criteria.
wa_fieldcat-fieldname = 'FIELD1'.
wa_fieldcat-inttype = 'C'.
wa_fieldcat-outputlen = '10'.
wa_fieldcat-coltext = 'My Field 1'.
wa_fieldcat-seltext = wa_fieldcat-coltext.
APPEND wa_fieldcat TO t_fieldcat1.
wa_fieldcat-fieldname = 'FIELD2'.
wa_fieldcat-inttype = 'C'.
wa_fieldcat-outputlen = '10'.
wa_fieldcat-coltext = 'My Field 2'.
wa_fieldcat-seltext = wa_fieldcat-coltext.
APPEND wa_fieldcat TO t_fieldcat1.
* Before adding cell color table,
* save fieldcatalog to pass
* to ALV call.
t_fieldcat2[] = t_fieldcat1[].
* Add cell color table.
* ZCDF_CELL_COLOR is a structure in the
* dictionary with one
* field called T_CELL_COLOR of type LVC_T_SCOL.
wa_fieldcat-fieldname = 'T_CELLCOLORS'.
wa_fieldcat-ref_field = 'T_CELL_COLOR'.
wa_fieldcat-ref_table = 'ZCDF_CELL_COLOR'.
APPEND wa_fieldcat TO t_fieldcat1.
* Create dynamic table.
CALL METHOD cl_alv_table_create=>create_dynamic_table
 EXPORTING
 it_fieldcatalog = t_fieldcat1
 IMPORTING
 ep_table = r_dyn_table
 EXCEPTIONS
 generate_subpool_dir_full = 1
 OTHERS = 2.
IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
* Get access to new table using field symbol.
ASSIGN r_dyn_table->* TO <t_dyn_table>.
* Create work area for new table.
CREATE DATA r_wa_dyn_table LIKE LINE OF <t_dyn_table>.
* Get access to new work area using field symbol.
ASSIGN r_wa_dyn_table->* TO <wa_dyn_table>.
* Get data into table from somewhere. Field names are
* known at this point because field catalog is already
* built. Read field names from the field catalog or use
* COMPONENT <number> in a DO loop to access the fields.
* A simpler hard coded approach is used here.
ASSIGN COMPONENT 'FIELD1' OF STRUCTURE <wa_dyn_table>
 TO <w_field>.
<w_field> = 'ABC'.
ASSIGN COMPONENT 'FIELD2' OF STRUCTURE <wa_dyn_table>
 TO <w_field>.
<w_field> = 'XYZ'.
APPEND <wa_dyn_table> TO <t_dyn_table>.
ASSIGN COMPONENT 'FIELD1' OF STRUCTURE <wa_dyn_table>
 TO <w_field>.
<w_field> = 'TUV'.
ASSIGN COMPONENT 'FIELD2' OF STRUCTURE <wa_dyn_table>
 TO <w_field>.
<w_field> = 'DEF'.
APPEND <wa_dyn_table> TO <t_dyn_table>.
* Color cells based on your criteria.
* In this example, a test on
* FIELD2 is used to decide on color.
LOOP AT <t_dyn_table> INTO <wa_dyn_table>.
 ASSIGN COMPONENT 'FIELD2' OF STRUCTURE <wa_dyn_table>
 TO <w_field>.
 ASSIGN COMPONENT 'T_CELLCOLORS'
 OF STRUCTURE <wa_dyn_table> TO <t_cellcolors>.
 CLEAR wa_cellcolors.
 wa_cellcolors-fname = 'FIELD2'.
 IF <w_field> = 'DEF'.
 wa_cellcolors-color-col = '7'.
 ELSE.
 wa_cellcolors-color-col = '5'.
 ENDIF.
 APPEND wa_cellcolors TO <t_cellcolors>.
 MODIFY <t_dyn_table> FROM <wa_dyn_table>.
ENDLOOP.
CALL SCREEN 100.
* MODULE initialization OUTPUT
MODULE initialization OUTPUT.
* Set up for ALV display.
IF r_dock_ctnr IS INITIAL.
 CREATE OBJECT r_dock_ctnr
 EXPORTING
 side =
 cl_gui_docking_container=>dock_at_left
 ratio = '90'.
 CREATE OBJECT r_alv_grid
 EXPORTING i_parent = r_dock_ctnr.
* Set ALV controls.
 wa_is_layout-ctab_fname = 'T_CELLCOLORS'.
* Display.
 CALL METHOD r_alv_grid->set_table_for_first_display
 EXPORTING
 is_layout = wa_is_layout
 CHANGING
 it_outtab = <t_dyn_table>
 it_fieldcatalog = t_fieldcat2.
ELSE. "grids already prepared
* Refresh display.
 CALL METHOD r_alv_grid->refresh_table_display
 EXPORTING
 i_soft_refresh = ' '
 EXCEPTIONS
 finished = 1
 OTHERS = 2.
ENDIF.
ENDMODULE. " initialization OUTPUT

Creating dynamic internal table with deep structure

Hi all,
I need to create an internal table with deep structure dynamically. I've already created tables with method 'create_dynamic_table' but I'm struggling with the deep structure.
I would need an internal table with the following structure:
DATA: BEGIN OF lt_t1,
s1 TYPE REF TO data,
s2 TYPE REF TO data,
END OF lt_t1.
S1 and S2 have to be tables.
It might be possible with RTTS but all the examples in the forums (that I've found so far) are related to at least one DDIC-structure. And that's my problem because both tables are created during runtime.
Thank you in advance
Nicola

Hi Frédéric,
I hope my english is good enough to explain it correctly:
We use a function builder for SEM-BPS which copies data from one Cube to another. This Cube is transactional, so you can't easily read a structure out of DDIC.
The export parameter of this function builder is a table with type 'any table'.
Until today we used a fixed definition e.g.:
TYPES:
    BEGIN OF xtyp_chas,
     /sie/sr_ocomp TYPE /b52/oisr_ocomp,
     /sie/ts_03psp TYPE /b52/oits_03psp,
     0activity     TYPE /bi0/oiactivity,
     0acty_elemt   TYPE /bi0/oiacty_elemt,
     0costelmnt    TYPE /bi0/oicostelmnt,
     0co_area      TYPE /bi0/oico_area,
     0creditor     TYPE /bi0/oicreditor,
     0currency     TYPE /bi0/oicurrency,
     0curtype      TYPE /bi0/oicurtype,
     0db_cr_ind    TYPE /bi0/oidb_cr_ind,
     0fiscper      TYPE /bi0/oifiscper,
     0fiscper3     TYPE /bi0/oifiscper3,
     0fiscyear     TYPE /bi0/oifiscyear,
     0metype       TYPE /bi0/oimetype,
     0network      TYPE /bi0/oinetwork,
     0part_actty   TYPE /bi0/oipart_actty,
     0part_cctr    TYPE /bi0/oipart_cctr,
     0piobjsv      TYPE /bi0/oipiobjsv,
     0project      TYPE /bi0/oiproject,
     0unit         TYPE /bi0/oiunit,
     0vtdetail     TYPE /bi0/oivtdetail,
     0vtstat       TYPE /bi0/oivtstat,
     0vtype        TYPE /bi0/oivtype,
     0bus_area     TYPE /bi0/oibus_area,
     0cashdetail   TYPE /bi0/oicashdetail,
     0cashtype     TYPE /bi0/oicashtype,
     0comp_code    TYPE /bi0/oicomp_code,
     0coorder      TYPE /bi0/oicoorder,
     0cs_dimen     TYPE /bi0/oics_dimen,
     0cs_unit      TYPE /bi0/oics_unit,
     0int_bus      TYPE /bi0/oiint_bus,
     0part_abcpr   TYPE /bi0/oipart_abcpr,
     0part_coord   TYPE /bi0/oipart_coord,
     0part_wbsel   TYPE /bi0/oipart_wbsel,
     0piovalue     TYPE /bi0/oipiovalue,
     0profit_ctr   TYPE /bi0/oiprofit_ctr,
     0ps_obj       TYPE /bi0/oips_obj,
     0statussys0   TYPE /bi0/oistatussys0,
     zfbwheroj     TYPE /bic/oizfbwheroj,
    END   OF xtyp_chas,
    BEGIN OF xtyp_kyfs,
      0amount      TYPE /bi0/oiamount,
      0quantity    TYPE /bi0/oiquantity,
      zf03oaws     TYPE /bic/oizf03oaws,
      zf03oqty     TYPE /bic/oizf03oqty,
      zf03ozsta    TYPE /bic/oizf03ozsta,
    END OF xtyp_kyfs,
    BEGIN OF xtyp_zf03g003,
      s_chas TYPE xtyp_chas,
      s_kyfs TYPE xtyp_kyfs,
    END   OF xtyp_zf03g003,
    xtyp_zf03g003_t TYPE HASHED TABLE OF xtyp_zf03g003
                      WITH UNIQUE KEY s_chas.
DATA: lt_ibm_data TYPE xtyp_zf03g003_t,
      ls_ibm_data TYPE xtyp_zf03g003.
So one table (s_chas) contains the characteristics of the Cube and the other (s_kyfs) contains the keyfigures. That's exactly the format we need for the export parameter. At the end of the program, we use the following coding to fill the export table (eto_chas):
loop at lt_ibm_data into ls_ibm_data.
collect ls_ibm_data-s_chas into eto_chas.
endloop.
So in this moment I give this table the structure that is needed to move the data into the cube. I can't change the requirement because it is a standard interface.
I would like to change that coding to be dynamically. Because if somebody changes a charasteristic or a keyfigure in the cube, we would have to change the function builder too. I don't think that the SEM-BPS department will let us know every time they've changed something anyway.
So I hope that my explanation wasn't too confusing
Nicola

Deep structure help

hi
I am trying to insert values from a deep structure into a database table.
if I have a structure xixi_stvalues which has
id which is of type char7
type of type char20
results of type xixi_ttresults <- this is a table, implying that the xixi_stvalues is a deep structure
Now...I want to save both id and type into xixi_dbvalues
I tried this:
Insert into xixi_dbvalues values xixi_stvalues-id xixi_stvalues-type.
this tells me thatexpects a '.' after
I HAVE ALREADY TRIED USING HELP.
Thanks

Hi charla6,
For example there is a 3D internal table (it_tab) like this....
Name
Age
Address --> houseno, street1, street2. (type table field)
vehicle
now create a data like this
DATA: it_add like line of it_tab-address.
loop at it_tab-address into it_add.
"this will give u all the field values like it_add-houseno, it_add-street1, it_add-street2.
endloop.
like this u can read all the 3D internal tables
Do reply if still problem persist.
Thanks
Rohit G
Edited by: Rohit Gaharwar on Aug 12, 2009 12:06 PM

Read a Deep Structure

Similar Messages

Maybe you are looking for