Read a FIle using a Sender Adapter

Hi Experts,
Is there any way to read a file at the external FTP Server without deleting or archiving it. I would not like to use the "Test Mode" processing Mode in the production System(  ) and also i need to schedule this adapter for 3 hours to read the file whenever it is generated  in every morning. This should be done only once ie.. one message to be created.
We are not using any content conversion.
In this case , we are not using any mappings but only retrieving the file from the external system.
-Reynold

The scheduling of your channels would always help. Use Planning Availability Times to activate the channel at 3 AM and deactivating at 6 AM.
With the test mode, if you are sure that one file should be picked only once, then keep the poll interval as more that 180 minutes. This would ensure that between 3-6 AM, the file would be picked only once. After that the channel will get deactivated. Next day, refreshed polling will be started.
Regards,
Prateek

Similar Messages

  • Is it possible to read the file using File Adapter which is in client machi

    Is it possible to read the file using file Adapter which is in client machine(on the same network).Then what is thee need of FTP Adapter?

    You can achieve that by exposing your client machine as a drive, then you can go using file adapter.
    FTP adapter will help you to communicate with different machine which is in different network.
    It is considered good etiquette to reward answerers with points (as "helpful" - 5 pts - or "correct" - 10pts).
    Thanks,
    Vijay

  • How to read pdf file using file adapter

    Hi..
        How to read pdf file using file adapter?
    regards
    Arun

    Hi
    This may help you
    /people/sap.user72/blog/2005/07/27/xi-generate-pdf-file-out-of-file-adapter
    /people/alessandro.guarneri/blog/2007/02/21/sap-xi-acting-as-a-huge-file-mover
    ---Ram

  • ADF mobile: how do I upload a file using the rest adapter api

    Hello,
    I want to upload files using the rest adapter. How would I upload files such as pdfs, images (png, jpg ..) etc.. Some code would be appreciated.
    Thanks,

    Thanks Frank,
    The back-end is functioning in the following way (using Jersey and handling input streams):
        @POST
        @Path("/uploadFile")
        @Consumes(MediaType.MULTIPART_FORM_DATA)
        public Response uploadFile(@FormDataParam("file") InputStream uploadedInputStream, @FormDataParam("file") FormDataContentDisposition fileDetail) {
            String uploadedFileLocation = "D:\\temp\\uploadsTest\\" + fileDetail.getFileName();
            // save it (this function reads from the input stream)
            writeToFile(uploadedInputStream, uploadedFileLocation);
            String output = "File uploaded to : " + uploadedFileLocation;
            return Response.status(200).entity(output).build();
         Is there a way to send data over a stream?
         Thanks,

  • Sending plain request to web service using receiver sender adapter and PI and expecting as attachment as response

    Hi
    In my scenario,we are sending plain request to web service using receiver sender adapter and PI will receive response as excel attachment. What are standard module required to achieve this and sequence? or checking Keep attachment box will help us to achieve this? 
    is it possible to receive excel sheet as attachment from receiver soap adapter ?
    Thanks in Advance

    Hi,
    This issue might be due to the invalid .pem certificate file.
    Make sure to include the beginning and end tags on each certificate.                   
    The result should look like this:                
    -----BEGIN CERTIFICATE-----
    (Your Primary SSL certificate: your_domain_name.crt)
    -----END CERTIFICATE-----
    -----BEGIN CERTIFICATE-----
    (Your Intermediate certificate: DigiCertCA.crt)
    -----END CERTIFICATE-----
    For more detailed information, you could refer to:
    https://www.digicert.com/ssl-support/pem-ssl-creation.htm
    Regards

  • Unable to read PDF files created by FTP Adapter

    Hi,
    I am unable to read pdf files generated by FTP Adapter with its default settings.
    Can anybody guide me how to proceed with it. I guess I need to change something in encoding mechanism in FTP Adapter Outbound Connection Pool, but not sure what has to be.
    Thanks,
    Richa

    Hi all,
    I have got its solution. I was unable to read .pdf files because FTP adapter  was sending the files just by changing the extension from .txt /.xml to .pdf that is the reason that it was not readable.
    We had to write an java code to convert .xml file to .pdf file and then paas it to FTP ADapter.
    Thanks

  • How to read pdf files using java.io package classes

    Dear All,
    I have a certain requirement that i should read and write PDF files at runtime. With normal java file IO reading is not working. Can any one suggest me how to proceed probably with sample code block
    Thanks in advance.

    hi I also have the pbm. to read pdf file using JAVA
    can any body help meWhy is it so difficult to read the thread you posted in? They say: java.io is pointless, use iText. So why don't you?
    or also I want to read a binary encoded data into
    ascii,
    can anybody give me a hint how to do it.Depends on what you mean with "binary encoding". ASCII's binary encoding, too, basically.

  • How to update two tables in a single call using JDBC Sender adapter

    Hello All,
    The scenario is, database entries have to be selected from two tables and at the same time those tables have to be udpated with the flag.
    We are using JDBC sender adapter and in Select Query, we are fetching the data by joinin the two tables.
    Update Statemtent: We can only update one table using this statement.
    Is it possible to update two tables using the Update Statement without using Stored Procedures.
    Let me know.
    Regards,
    Sreenivas.

    Hi Sreenivas,
    > Is it possible to update two tables using the Update Statement without using Stored Procedures.
    Yes its possible through join statement
    Check this links
    Update in JDBC Sender adapter for more than one table
    data from 2 tables for jdbc sender adapter
    Regards
    Ramesh

  • Reading XML file using BAPI and then uploading that xml file data into SAP

    I am getting a xml file from Java server. I need to take
    data from this file using BAPI and need to upload into SAP using SAP.
    Please tell me how to read XML files using BAPI's.

    <b>SDIXML_DATA_TO_DOM</b> Convert SAP data (elementary/structured/table types) into DOM (XML
    <b>SDIXML_DOM_TO_XML</b>  Convert DOM (XML) into string of bytes that can be downloaded to PC or application server
    <b>SDIXML_DOM_TO_SCREEN</b> Display DOM (XML)
    <b>SDIXML_DOM_TO_DATA</b>
    data: it_table like t001 occurs 0.
    data: l_dom      TYPE REF TO IF_IXML_ELEMENT,
          m_document TYPE REF TO IF_IXML_DOCUMENT,
          g_ixml     TYPE REF TO IF_IXML,
          w_string   TYPE XSTRING,
          w_size     TYPE I,
          w_result   TYPE I,
          w_line     TYPE STRING,
          it_xml     TYPE DCXMLLINES,
          s_xml      like line of it_xml,
          w_rc       like sy-subrc.
    start-of-selection.
      select * from t001 into table it_table.
    end-of-selection.
    initialize iXML-Framework          ****
      write: / 'initialiazing iXML:'.
      class cl_ixml definition load.
      g_ixml = cl_ixml=>create( ).
      check not g_ixml is initial.
      write: 'ok'.
    create DOM from SAP data           ****
      write: / 'creating iXML doc:'.
      m_document = g_ixml->create_document( ).
      check not m_document is initial.
      write: 'ok'.
      write: / 'converting DATA TO DOM 1:'.
      CALL FUNCTION 'SDIXML_DATA_TO_DOM'
        EXPORTING
          NAME               = 'IT_TABLE'
          DATAOBJECT         = it_table[]
        IMPORTING
          DATA_AS_DOM        = l_dom
        CHANGING
          DOCUMENT           = m_document
        EXCEPTIONS
          ILLEGAL_NAME       = 1
          OTHERS             = 2.
      if sy-subrc = 0.  write  'ok'.
      else.             write: 'Err =', sy-subrc.
      endif.
      check not l_dom is initial.
      write: / 'appending DOM to iXML doc:'.
      w_rc = m_document->append_child( new_child = l_dom ).
      if w_rc is initial.  write  'ok'.
      else.                write: 'Err =', w_rc.
      endif.
    visualize iXML (DOM)               ****
      write: / 'displaying DOM:'.
      CALL FUNCTION 'SDIXML_DOM_TO_SCREEN'
        EXPORTING
          DOCUMENT          = m_document
        EXCEPTIONS
          NO_DOCUMENT       = 1
          OTHERS            = 2.
      if sy-subrc = 0.  write  'ok'.
      else.             write: 'Err =', sy-subrc.
      endif.
    convert DOM to XML doc (table)     ****
      write: / 'converting DOM TO XML:'.
      CALL FUNCTION 'SDIXML_DOM_TO_XML'
        EXPORTING
          DOCUMENT            = m_document
        PRETTY_PRINT        = ' '
        IMPORTING
          XML_AS_STRING       = w_string
          SIZE                = w_size
        TABLES
          XML_AS_TABLE        = it_xml
        EXCEPTIONS
          NO_DOCUMENT         = 1
          OTHERS              = 2.
      if sy-subrc = 0.   write  'ok'.
      else.              write: 'Err =', sy-subrc.
      endif.
      write: / 'XML as string of size:', w_size, / w_string.
      describe table it_xml lines w_result.
      write: / 'XML as table of', w_result, 'lines:'..
      loop at it_xml into s_xml.
        write s_xml.
      endloop.
      write: / 'end of processing'.
    end of code
    Hope this will be useful.
    regards
    vinod

  • Reading XML file using BAPI  I must use adapters .

    Reading XML file using BAPI and then uploading that xml file data into SAP using BDC.
    I cant take file on to my Application server I am getting the file dynamically from other file server and I need to use BAPis to read data from XML file.please tell me what should be my Import,Export and Tables parameterrs should be.
    Thanks

    Hi,
    Import, export and table parameters for BAPI is required, without that BAPI will not able to collect the data from XML. What you need to do is write a Zprogram and collect the data, store that data in internal table and call the BAPI by passing required parameters.
    Different Scanarios:
    1) Before calling a BAPI write some other program which collects the data from XML and create a UNIX file. Try to get the data from UNIX FILE
    2) If you see the XML tags, data will be in side that tags, try to get the data from XML tags and store that data in one SAP table. You can use the BAPI by fetching the data from table
    3)Create a table and store the data in the table. Use the table in SAP to extract the data.
    BAPI won't work without any parameters, you have to pass some parameters then the BAPI will return some values.
    Hope i am clear.
    Thanks&Regards,
    -Suresh Revuru

  • How to read HTML files using UTL_FILE

    Hello Friends,
    How to read HTML files using UTL_FILE package ? According
    to Oracle documentation UTL_FILE can read or write OS Text Files.
    Thanx in advance..
    Adi

    HI Hareesh,
    i have gone through that blog.
    i tried it...but i am getting mapping error  no receiver determination fond because there are so  many excel files.
    my data is available on sharedString.xml but also it is in not same order.
    i have no clue how to handle this part form the blog.
    "This way our mapping will receive all data from the sheet in an XML format. The only thing that's left is to create an XSD file from the XML file we received in order to be able to use it in the mapping and as our Service Interface and we can proceed with mapping. As you can see from the sheet.xml files all the data is placed with column name and row number so it's not that difficult to map it to an table type format using the Message Mapping only (no java, abap mapping required)."

  • How to read 835 files using ssis

    Hello Everyone,
    It is possible read 835 files using ssis.
    Please share your suggestions on this.
    Regards,
    Vaishu

    Hi Vaishu,
    None of the canned (standard) SSIS tasks let you do so.
    But if you can buy http://www.cozyroc.com/ssis/edi-source (I am not anyhow affiliated with CozyRoc) it states it can read ERA (AKA 835) files. CozyRoc lets you run it for free in Dev.
    If there will be a decision not to buy then you can simply crate a transformation out of several manipulations or by creating a custom SSIS component or some other programming methods need to be used.
    PS: Again, I just know CozyRoc quality of components is awesome, but I do not make any profit from referring to it.
    Arthur My Blog

  • Storedprocedure trigger using JDBC sender adapter.

    Hi All,
    How can i execute the storedprocedure using JDBC sender adapter. I need to trigger the storedprocedure once in every hour. so i would like to use the JDBC sender adapter. My question is what is the SQL i need use in the SQLstatement parameter..?? I don't want to send parameters and not expecting any return values. It should just trigger the procedure.
    Thanks in adv.
    Regards,

    Hi Murali,
    it is possible to execute a stored porcedure using a sender JDBC adapter.
    Just Specify an SQL EXECUTE statement to execute a stored procedure, which contains exactly one SELECT statement.
    This will have to be done for your SELECT statement in JDBC adapter. ALso, make the UPDATE as either TEST, if you dont want any updations or give an UPDATE statement for the UPDATE query.
    Set the polling interval of your JDBC adapter to 1 hour and it will work like u want.
    http://help.sap.com/saphelp_nw04/helpdata/en/7e/5df96381ec72468a00815dd80f8b63/content.htm
    Regards,
    Bhavesh

  • I am unable to read pdf files using Acrobat Reader on my MAC OS X. Any suggestions?

    How do I read pdf files using my MAC OS X?

    You can read pdf files with preview. Select a pdf document, right click on it, and choose Preview. You can also get info and select to choose Preview for all.
    You can also install Adobe Reader 10.1.3 for Lion. It will also install a plug-in to read pdf docs in the browser.
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=5360

  • How to create and read text file using LabVIEW 7.1 PDA module?

    How to create and read text file using LabVIEW 7.1 PDA module? I can not create a text file and read it.
    I attach my code here.
    Attachments:
    File_IO.vi ‏82 KB

    Well my acquisition code runs perfect. The problem is reading it. I can't seem to read my data no matter what I do. My data gets saved as a string using the array to string vi but I've read that the string to array vi (which I need to convert back to array to read my data) does not work on the pda. I'm using version 8.0. So I was trying to modify the program posted in this discussion so that it would save data from my DAQ. I did that but I still can't read the data after its saved. I really don't know what else to do. All I need to do is read the data on the pda itself. I can't understand why I'm having such a hard time doing that. I found a possible solution on another discussion that talks about parsing the strings because of the bug in the "string to array" vi. However, that lead me to another problem because for some reason, the array indicators or graphs don't function on the pda. When i build the program to the pda or emulator, the array indicators are faded out on the front panel as if the function is not valid. Does this kind of help give a better picture of what I'm trying to do. Simply read data back. Thanks.

Maybe you are looking for