Read a schedule task log, please help!

The shcedule task I  a few months ago work nicely
however this morning I noticed the task was completed only at the beginning and the process seems to stop.
I went to the application log, no error was listed from this process then I went to the schedule task log and see this:
(screen shot attached)
This process is scheduled to run at 5:45AM every morning once.
I noticed in column ThreadID, the task is listed as Scheduler-2
Looking at other ThreadIDs from yesterday or the day before, I see Scheduler-0, Scheduler-1 and from last Sunday it showed as Scheduler-3
What does it means???? I don't see any error at all, anywhere. What can I do to find out what's the problem was, any advice?

Some mysterious problems with the scheduler usually disappear when you delete the task, then reschedule it as a new task.

Similar Messages

  • HI! I am using iTunes with Windows 7 64bit.after upgrading itunes  to 10.5.2.11 it opens only once. If i close it, then it will not open again.the only way to open itunes is by disabling the APSDaemon.exe from the task manager.please help!

    HI! I am using iTunes with Windows 7 64bit.after upgrading itunes  to 10.5.2.11 it opens only once. If i close it, then it will not open again.the only way to open itunes is by disabling the APSDaemon.exe from the task manager.please help!

    Refer this article to reset Winsock to it's default.  Your PCTools may have inserted LSP.
    http://support.apple.com/kb/TS4123?viewlocale=en_US
    After reset and restarting windows, you may get a prompt to remap LSP, click no.

  • Lion keeps crashing on mpb  Here is the crash log PLEASE HELP

    lion keeps crashing, esp when using google chrome. even when im not. but chrome in itself crashes alot
    here is the log please help !  thanks in advance
    Interval Since Last Panic Report:  1679610 sec
    Panics Since Last Report:          8
    Anonymous UUID:                    FDE78AD6-758D-4DC5-AD98-44A735087EC1
    Sat May  5 18:26:53 2012
    panic(cpu 1 caller 0xffffff80005f666f): "removeSymbol"@/SourceCache/xnu/xnu-1699.24.8/libkern/c++/OSSymbol.cpp:366
    Backtrace (CPU 1), Frame : Return Address
    0xffffff80fe3a3cd0 : 0xffffff8000220702
    0xffffff80fe3a3d50 : 0xffffff80005f666f
    0xffffff80fe3a3db0 : 0xffffff80005f6069
    0xffffff80fe3a3dd0 : 0xffffff80005f5e25
    0xffffff80fe3a3e00 : 0xffffff80005e45bb
    0xffffff80fe3a3e30 : 0xffffff80005e47f9
    0xffffff80fe3a3e50 : 0xffffff80005e45cd
    0xffffff80fe3a3e80 : 0xffffff80005e47f9
    0xffffff80fe3a3ea0 : 0xffffff80005ec34e
    0xffffff80fe3a3ec0 : 0xffffff80005e45cd
    0xffffff80fe3a3ef0 : 0xffffff80005eb30e
    0xffffff80fe3a3f30 : 0xffffff80005eb003
    0xffffff80fe3a3f70 : 0xffffff800023db2c
    0xffffff80fe3a3fb0 : 0xffffff8000820057
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    11C74
    Kernel version:
    Darwin Kernel Version 11.2.0: Tue Aug  9 20:54:00 PDT 2011; root:xnu-1699.24.8~1/RELEASE_X86_64
    Kernel UUID: 59275DFA-10C0-30B3-9E26-F7B5DFB1A432
    System model name: MacBookPro5,4 (Mac-F22587A1)
    System uptime in nanoseconds: 256203088583
    last loaded kext at 53037096637: com.apple.driver.AppleHWSensor          1.9.4d0 (addr 0xffffff7f81d40000, size 28672)
    loaded kexts:
    com.paceap.kext.pacesupport.snowleopard          5.7.2
    com.apple.driver.AppleHWSensor          1.9.4d0
    com.apple.filesystems.autofs          3.0
    com.apple.driver.AudioAUUC          1.59
    com.apple.iokit.IOUserEthernet          1.0.0d1
    com.apple.Dont_Steal_Mac_OS_X          7.0.0
    com.apple.driver.AppleMikeyHIDDriver          122
    com.apple.driver.AppleTyMCEDriver          1.0.2d2
    com.apple.driver.AppleHDA          2.1.3f7
    com.apple.driver.AGPM          100.12.42
    com.apple.driver.AppleMikeyDriver          2.1.3f7
    com.apple.driver.AppleUpstreamUserClient          3.5.9
    com.apple.driver.AppleMCCSControl          1.0.26
    com.apple.driver.AudioIPCDriver          1.2.1
    com.apple.GeForce          7.1.2
    com.apple.driver.AppleBacklight          170.1.9
    com.apple.driver.SMCMotionSensor          3.0.1d2
    com.apple.driver.AppleLPC          1.5.3
    com.apple.driver.AppleSMCLMU          2.0.1d2
    com.apple.driver.AppleMuxControl          3.0.16
    com.apple.driver.ACPI_SMC_PlatformPlugin          4.7.5d4
    com.apple.driver.AppleUSBTCButtons          225.2
    com.apple.driver.AppleUSBTCKeyEventDriver          225.2
    com.apple.driver.AppleUSBTCKeyboard          225.2
    com.apple.driver.AppleIRController          312
    com.apple.driver.AppleUSBCardReader          3.0.1
    com.apple.iokit.SCSITaskUserClient          3.0.1
    com.apple.iokit.IOAHCIBlockStorage          2.0.1
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
    com.apple.BootCache          33
    com.apple.driver.AirPort.Brcm4331          512.20.18
    com.apple.driver.AppleAHCIPort          2.2.0
    com.apple.driver.AppleFWOHCI          4.8.9
    com.apple.driver.AppleUSBHub          4.5.0
    com.apple.nvenet          2.0.17
    com.apple.driver.AppleUSBEHCI          4.5.0
    com.apple.driver.AppleUSBOHCI          4.4.5
    com.apple.driver.AppleSmartBatteryManager          161.0.0
    com.apple.driver.AppleEFINVRAM          1.5.0
    com.apple.driver.AppleRTC          1.4
    com.apple.driver.AppleHPET          1.6
    com.apple.driver.AppleACPIButtons          1.4
    com.apple.driver.AppleSMBIOS          1.7
    com.apple.driver.AppleACPIEC          1.4
    com.apple.driver.AppleAPIC          1.5
    com.apple.driver.AppleIntelCPUPowerManagementClient          167.0.0
    com.apple.nke.applicationfirewall          3.2.30
    com.apple.security.quarantine          1
    com.apple.driver.AppleIntelCPUPowerManagement          167.0.0
    com.apple.kext.triggers          1.0
    com.apple.iokit.IOSurface          80.0
    com.apple.iokit.IOBluetoothSerialManager          4.0.1f4
    com.apple.iokit.IOSerialFamily          10.0.5
    com.apple.iokit.IOAVBFamily          1.0.0d22
    com.apple.iokit.IOEthernetAVBController          1.0.0d5
    com.apple.driver.AppleHDAHardwareConfigDriver          2.1.3f7
    com.apple.driver.DspFuncLib          2.1.3f7
    com.apple.iokit.IOAudioFamily          1.8.3fc11
    com.apple.kext.OSvKernDSPLib          1.3
    com.apple.driver.ApplePolicyControl          3.0.16
    com.apple.nvidia.nv50hal          7.1.2
    com.apple.NVDAResman          7.1.2
    com.apple.iokit.IOFireWireIP          2.2.4
    com.apple.driver.AppleHDAController          2.1.3f7
    com.apple.iokit.IOHDAFamily          2.1.3f7
    com.apple.driver.AppleBacklightExpert          1.0.3
    com.apple.driver.AppleGraphicsControl          3.0.16
    com.apple.iokit.IONDRVSupport          2.3.2
    com.apple.iokit.IOGraphicsFamily          2.3.2
    com.apple.driver.AppleSMBusController          1.0.10d0
    com.apple.driver.AppleSMC          3.1.1d8
    com.apple.driver.IOPlatformPluginFamily          4.7.5d4
    com.apple.driver.AppleSMBusPCI          1.0.10d0
    com.apple.driver.AppleFileSystemDriver          13
    com.apple.driver.BroadcomUSBBluetoothHCIController          4.0.1f4
    com.apple.driver.AppleUSBBluetoothHCIController          4.0.1f4
    com.apple.iokit.IOBluetoothFamily          4.0.1f4
    com.apple.driver.AppleUSBMultitouch          227.1
    com.apple.iokit.IOUSBHIDDriver          4.4.5
    com.apple.iokit.IOSCSIBlockCommandsDevice          3.0.1
    com.apple.iokit.IOUSBMassStorageClass          3.0.0
    com.apple.driver.AppleUSBMergeNub          4.5.3
    com.apple.driver.AppleUSBComposite          3.9.0
    com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.0.1
    com.apple.iokit.IOBDStorageFamily          1.6
    com.apple.iokit.IODVDStorageFamily          1.7
    com.apple.iokit.IOCDStorageFamily          1.7
    com.apple.driver.XsanFilter          403
    com.apple.iokit.IOAHCISerialATAPI          2.0.1
    com.apple.iokit.IOSCSIArchitectureModelFamily          3.0.1
    com.apple.iokit.IO80211Family          411.1
    com.apple.iokit.IOAHCIFamily          2.0.7
    com.apple.iokit.IOFireWireFamily          4.4.5
    com.apple.iokit.IOUSBUserClient          4.5.3
    com.apple.iokit.IONetworkingFamily          2.0
    com.apple.iokit.IOUSBFamily          4.5.3
    com.apple.driver.NVSMU          2.2.9
    com.apple.driver.AppleEFIRuntime          1.5.0
    com.apple.iokit.IOHIDFamily          1.7.1
    com.apple.iokit.IOSMBusFamily          1.1
    com.apple.security.sandbox          165.3
    com.apple.kext.AppleMatch          1.0.0d1
    com.apple.security.TMSafetyNet          7
    com.apple.driver.DiskImages          331
    com.apple.iokit.IOStorageFamily          1.7
    com.apple.driver.AppleKeyStore          28.18
    com.apple.driver.AppleACPIPlatform          1.4
    com.apple.iokit.IOPCIFamily          2.6.7
    com.apple.iokit.IOACPIFamily          1.4
    Model: MacBookPro5,4, BootROM MBP53.00AC.B03, 2 processors, Intel Core 2 Duo, 2.53 GHz, 8 GB, SMC 1.49f2
    Graphics: NVIDIA GeForce 9400M, NVIDIA GeForce 9400M, PCI, 256 MB
    Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333531533641465238432D48392020
    Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333531533641465238432D48392020
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.100.98.75.18)
    Bluetooth: Version 4.0.1f4, 2 service, 11 devices, 1 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: Hitachi HTS542525K9SA00, 250.06 GB
    Serial ATA Device: MATSHITADVD-R   UJ-868
    USB Device: Built-in iSight, apple_vendor_id, 0x8507, 0x24400000 / 2
    USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0x26500000 / 2
    USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x04500000 / 3
    USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0236, 0x04600000 / 2
    USB Device: BRCM2046 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0x06100000 / 2
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8213, 0x06110000 / 3

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    Note: If FileVault is enabled under Mac OS X 10.7 or later, you can’t boot in safe mode.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem(s)?
    After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • I Can't open the attechment in mail with latter open , acrobat reader , ... . Please help me

    Atfer the upgrade os of my ipad to 6 . i can't open the all of attechment in LATTEROPEN  program & Acrobat Reader & other app.
    PLease help me. how can i open it ?

    I my case there is no button - I can't even scroll down. But I also don't get any error message, especially not "domain error 912".
    If I try to open the .mov file the screen shows the movie-progressbar (where you can normally scroll through the video) for half a second and then the screen goes gray. In the middle of the gray screen I can see the file name and the text "QuickTime-Film" (german version) and the file size. Underneath is a "play-button" (with no reaction if I click on it) and the buttons for forwarding the movie and the button for airplay. No "Download full message"-button.
    Seems that we are having different problems with more or less the same result. Again, it only seems to happen with mail which was sent through MS Exchange and it started with IOS 7.1. Therefore I don't think that we can fix it but I hope that someone from Apple is "listening".
    My fault! I misunderstood your posting - I was looking for a "download full message"-Button on the screen AFTER clicking on the movie icon. But you meant the mail itself - and there I found it. Thanx! That also explains why small mail went through without problems but larger didn't.

  • HT1338 I am using iPhoto '11 version 9.4.2 on Mac OS X.  I have a Leica D-LUX 6 and cannot get iPhoto to read my RAW files.  Please help.

    I am using iPhoto '11 version 9.4.2 on Mac OS X.  I have a Leica D-LUX 6 and cannot get iPhoto to read my RAW files.  Please help.

    Answered here:
    https://discussions.apple.com/message/20493786#20493786

  • Itunes 7.5 does not open, but it shows up in task manager please help?

    please help its been 2 months already and i cant sync my ipod cuz itunes does not open but it shows up on task manager.
    i have tried every thing but still it does not work. i have reintall my itunes and quicktime like 20 times i've gone to older version but still does not work.
    PLZZZZZZZZZZZZ HELPPPPP. im desperate and tired of liseting to the same songs for 2 months

    Let's try to get an idea of what might be going on with some preliminary questions from b noir's "smack" for iTunes launch failures:
    Is there an error message associated with the launch failure?
    If so, what does it say and what (if any) error numbers are there?
    If there's not an error message, let's check your QuickTime (its well-being is a requirement for a functioning iTunes).
    Go to the XP Start menu > All Programs and try running QuickTime.
    Does it start?
    If not, then the same question as for iTunes - is there an error message?
    If so, what does it say and what (if any) error numbers are there?
    Do you notice any other peculiar behavior with QuickTime?

  • I could not synchronize my ipod classic 180gb with itunes. whenever i connect and click podcast tab it gets hanged and no working untill i close all programs from task manager. please. help me

    Please help me in this regards.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • HT201209 I have bought two itune cards for 25.00 dollars each the card reads already been redeemed . Please help me retrieve my money with a $50.00 card

    Please help me with this problem I have bought $50.00 worth of itune cards and neither will work.  One was purchased ar Walgreens and the other at Krogers in Decatur IL.  Will you credit my account for $50.00?  That is what I have sent in the last two days. 
    Thank you
    Julie Pope
    <Personal Information Edited by Host>

    See Here...
    http://www.apple.com/hk/en/support/itunes/store/giftcard/
    If no joy...
    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • Oracle 10g XE Event Logs - Please help

    I'm running 10g XE on a Virtual 2003 Server. My Applicatin Event Logs the following events. I will get up to 20 events per minutes. I have posted the event description. Please advise. Thank you,
    The description for Event ID ( 5 ) in Source ( Oracle.xe ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: QMNC, xe.
    The description for Event ID ( 16 ) in Source ( Oracle.xe ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: xe.
    The description for Event ID ( 34 ) in Source ( Oracle.xe ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: ACTION : 'CONNECT' DATABASE USER: '/' PRIVILEGE : SYSDBA CLIENT USER: NT AUTHORITY\SYSTEM CLIENT TERMINAL: [Server FQDN stated in this area]: 0 .

    Hi Jab
    The last event is something Oracle logs per default. Every time someone logs in with sysdba privileges, it is logged to the event log. Read more in the manual
    Security guide, chapter 8
    Try to check the parameter
    AUDIT_TRAIL
    in the database
    show parameter AUDIT_TRAIL
    If it is set to OS and you have enabled auditing, then more events are written to the event log.
    Best wishes,
    Kennie
    The description for Event ID ( 34 ) in Source ( Oracle.xe ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: ACTION : 'CONNECT' DATABASE USER: '/' PRIVILEGE : SYSDBA CLIENT USER: NT AUTHORITY\SYSTEM CLIENT TERMINAL: Server FQDN stated in this area: 0 .

  • Error log - Please help

    Everything compiled ok, when I deployed in J2EE, I got this error log. What went wrong?
    Compilation failed.
         at com.sun.ejb.codegen.GeneratorDriver.compileClasses(GeneratorDriver.java:232)
         at com.sun.ejb.codegen.GeneratorDriver.preDeploy(GeneratorDriver.java:625)
         at com.sun.enterprise.tools.deployment.backend.JarInstallerImpl.deployEjbs(JarInstallerImpl.java:707)
         at com.sun.enterprise.tools.deployment.backend.JarInstallerImpl.deployApplication(JarInstallerImpl.java:221)
         at org.omg.stub.com.sun.enterprise.tools.deployment.backend._JarInstallerImpl_Tie._invoke(Unknown Source)
         at com.sun.corba.ee.internal.corba.ServerDelegate.dispatch(ServerDelegate.java:355)
         at com.sun.corba.ee.internal.iiop.ORB.process(ORB.java:255)
         at com.sun.corba.ee.internal.iiop.RequestProcessor.process(RequestProcessor.java:84)
         at com.sun.corba.ee.internal.orbutil.ThreadPool$PooledThread.run(ThreadPool.java:99)

    More information. Does anyone know how to correct the problem?
    Starting Deployment tool, version 1.3.1
    (Type 'deploytool -help' for command line options.)
    About to ValidateParse META-INF/application.xml file.
    BonusApp: There were no failed tests.
    About to ValidateParse META-INF/ejb-jar.xml file.
    No local string for com.sun.enterprise.tools.verifier.tests.ejb.intf.localintf.L
    ocalInterfaceMatchMethodArgs.failed
    No local string for com.sun.enterprise.tools.verifier.tests.ejb.intf.localintf.L
    ocalInterfaceMatchMethodArgs.failed
    No local string for com.sun.enterprise.tools.verifier.tests.ejb.intf.localintf.L
    ocalInterfaceMatchMethodArgs.failed
    CalcJar: Some tests failed.
    About to ValidateParse WEB-INF/web.xml file.
    BonusWar: There were no failed tests.
    Look in file "C:\WINDOWS\TEMP\Results2124870.xml" for detailed results on test a
    ssertions.
    Look in file "C:\WINDOWS\TEMP\Results2124870.txt" for detailed results on test a
    ssertions.

  • My phone will not read my sd card. PLEASE HELP!!!

    My phone was reading my card but then I pulled it out and it will not recoqnize it now.  Its like theres not even a card there.  I also cannot find the pictures that I was moving from the phone to the memory card.

    Make sure the card is inserted properly and that it's properly latched.  Then reboot the device by removing the battery.
    1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
    2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

  • Canon Vixia HF M301 camcorder cant download videos to my macbook pro with imovies 8.  I have read everything I can find, please help.  Josh

    I have a canon Vixia HF M301 camcorder and I can't get it to import videos to my Macbook Pro.  I have read and tried everything I can find and still no luck.  Any help would be greatly appreciated.

    Lorcan96791,
    Please make sure that you are using Transfer Utility, which is a program that is made by Pixela Corporation.  It came with your camcorder along with another program called VideoBrowser.
    If this is a time sensitive-matter, additional support options are available at Contact Us.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Adobe reader 9 unable to print - please help

    The printer works properly, but everytime time I try to print something off of Adobe Reader 9 while in PDF form it won't let me print. The error it gives me is Unable to print(window pops up, I hit okay or X it out) then another pops up saying, There is no selected item to print. It shows page 1/1 and it says how many pages to print printer has ink and paper it allows to print other stuff just PDF dosen't work for some odd reason, I use Windows XP can anyone help me? Thank you for reading.

    Hi GKaiseril:
    Answers to your questions:
    What product and version was being used by the person who could not save the PDF?  *Not sure but likely Acrobat Reader 8.0
    Did you apply Extended Reader Rights or Enabling Comments? *Yes. Extended reader rights.
    Did you apply any security? *No security added.
    I found out that she was 'adding' changes onto the 'filled' form that I sent her.  Perhaps that form was not reader-enabled or, she has done something that was not allowing her to save.
    Is her troubles normal?

  • I Cannot Uninstall Adobe Reader X (10.1.6), Please Help!

    I need to Uninstall Adobe Reader X (10.1.6)
    Adobe Reader X (10.1.6) is crashing everytime so I tried to uninstall it in Control Panel. I get the message "This patch package could not be opened. Verify that  the package perhaps exists and that you can access it..." This page http://helpx.adobe.com/acrobat/kb/error-1635-patch-package-not.html explains so well but not for my Adobe version 10.1.6 - I don't have the file HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer if I wanted to apply it...I know Adobe has a  cleaner but I don't see it's for Adobe 10.1.6. I have Windows version 5.1 Service Pack 3 Professional. I need to study some PDF files downloading a new working Adobe Reader. Your help is appreciated, thank you very much!!!
    Alicia

    Use the Adobe Cleaner for Acrobat/Reader

  • XL Reporter Server Error Log - Please Help

    Hi,
    We are getting the following error multiple times per day and have been for months.  Can anyone tell me what is causing this?
    Thanks,
    David
    Log Name:      Application
    Source:        Application Error
    Date:          11/25/2010 9:25:50 AM
    Event ID:      1000
    Task Category: (100)
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      VCO-PPI.vco.ttmg.com
    Description:
    Faulting application SAP Business One.exe, version 8.0.235.0, time stamp 0x4c2a727a, faulting module ole32.dll, version 6.0.6002.18277, time stamp 0x4c28d53e, exception code 0xc0000005, fault offset 0x00047336, process id 0x1b80, application start time 0x01cb8cad5f6ca8f6.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Application Error" />
        <EventID Qualifiers="0">1000</EventID>
        <Level>2</Level>
        <Task>100</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2010-11-25T15:25:50.000Z" />
        <EventRecordID>29765</EventRecordID>
        <Channel>Application</Channel>
        <Computer>VCO-PPI.vco.ttmg.com</Computer>
        <Security />
      </System>
      <EventData>
        <Data>SAP Business One.exe</Data>
        <Data>8.0.235.0</Data>
        <Data>4c2a727a</Data>
        <Data>ole32.dll</Data>
        <Data>6.0.6002.18277</Data>
        <Data>4c28d53e</Data>
        <Data>c0000005</Data>
        <Data>00047336</Data>
        <Data>1b80</Data>
        <Data>01cb8cad5f6ca8f6</Data>
      </EventData>
    VB message is below.
    Log Name:      Application
    Source:        VBRuntime
    Date:          11/25/2010 9:25:50 AM
    Event ID:      1
    Task Category: None
    Level:         Information
    Keywords:      Classic
    User:          N/A
    Computer:      VCO-PPI.vco.ttmg.com
    Description:
    The VB Application identified by the event source logged this Application XL Reporter: Thread ID: 6372 ,Logged: XL Reporter terminated.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="VBRuntime" />
        <EventID Qualifiers="0">1</EventID>
        <Level>4</Level>
        <Task>0</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2010-11-25T15:25:50.000Z" />
        <EventRecordID>29764</EventRecordID>
        <Channel>Application</Channel>
        <Computer>VCO-PPI.vco.ttmg.com</Computer>
        <Security />
      </System>
      <EventData>
        <Data>Application XL Reporter: Thread ID: 6372 ,Logged: XL Reporter terminated.</Data>
      </EventData>
    </Event>

    Our Excel version is 2007.  Would upgrading to 2010 solve the problem?  What is the problem?  We are running in a Citrix environment so it's not really client-based since everyone runs on the same server.
    Thanks for you reply!
    David

Maybe you are looking for