Read ABAP CDS view data in HANA CDS view

Hi experts,
We have created some ABAP CDS views, which we would like to reuse in a HANA CDS view.
When I refer to the ABAP CDS view as "SAP<SYSID>"."Z_ABAP_VIEW_NAME" in the HANA CDS view definition, I get a syntax error: Cannot find artifact...
Is it possible to re-use the ABAP view in my HANA CDS definition?
Is there an alias for the SAP<SYSID> schema? When we apply the developments on a QA or PRD system, the name of the erp content schema will be different...
Kind regards,
Luk

Hi luk,
You can use the ABAP CDS views in HANA CDS. You have to change the schema name while creating the HANA CDS view.
@schema:'$<schema> ' should contain your ABAP CDS view then you can consume it. the artifact cannot be found because you are creating HANA CDS in a different schema.
regards,
Prabuddha

Similar Messages

Anyone tried this - Extract data from HANA Live reuse views into BW?

Hello Experts,
I've read from this blog http://scn.sap.com/community/bw-hana/blog/2014/05/26/go-hybrid--sap-hana-live-sap-bw-data-integration that this scenario
> "Loading of data into BW using Reuse Layer of SAP HANA Live as data source (Extract data from HANA Live reuse views into BW)" is possible.
Does anyone has a step by step guide on how to do this? Can you please share?
Regards,
DaSaint

Hi DaSaint,
best to check the online documentation
Notes about transferring data from SAP HANA using ODP - Modeling - SAP Library
Best regards,
Andreas

My 24" iMac won't read audio cds--ejects them after about 15 seconds

My 24" intel iMac won't read audio cds. It ejects them after about 15 seconds. I have virtually never played cds on this machine in five years. It plays dads with no problem. Anybody have any feedback. I also saw a fix by deleting some presence files.

I saw this on a forum from about four years ago:
Trash the following folders:
com.apple.kernelcaches (from System/Library/Caches
extensions.kextcache (from System/Library
CDInfo.cidb (from Home/Library/Preferences
Restart
Could this be a fix.
Unfortunately, I can't reset PRAM. I've done it a thousand times over twenty years,but my machine simply boots up without the extra chimes.

How can i get itunes to read my CDs again

I cannot get iTunes to read my CDs. It keeps telling me to reinstall iTunes, and I did, but it still will not read my CDs

Hey there wesley254,
It sounds like your audio cds are not being seen in iTunes when you insert them into your drive. I would use the troubleshooting in the following article about that very subject:
iTunes for Windows doesn't recognize my audio CDs
http://support.apple.com/kb/ts1584
Verify Windows recognizes your optical drive
If Microsoft Windows recognized your optical drive, but doesn't recognize it now, follow the instructions in iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install.
Check for software updates
Microsoft or your computer's manufacturer may have released updated software. Check to see if there are updates to Windows or to the software that controls the drive. Check your computer manufacturer's website for updates, particularly for updates to the CD or DVD drive. If you bought the drive separately from the computer, check the drive manufacturer's website. In some cases, software drivers for other devices (such as video and sound cards) could affect how the CD or DVD drive works. Make sure your video and sound cards have the most current drivers.
Check for firmware updates
From time to time manufacturers publish updates to a CD or DVD drive's internal software (known as firmware). Check your computer manufacturer's website for firmware updates first. This is important because the internal drives used by some companies (including Dell) require special firmware. If an update is not available from the computer manufacturer, check with the company that made the drive. In some cases, firmware for other devices (such as video and sound cards) could affect how the CD or DVD drive works. Make sure your video and sound cards have the latest firmware as well.
Important: Use special care when installing firmware updates. Incorrectly installing a firmware update could damage the drive and make it unusable. Always check with the computer manufacturer first before checking with the drive manufacturer.
Additional steps
If you have more than one optical drive, try using iTunes with each drive.
Burner software conflicts
If iTunes had previously been working and you recently installed some software that also includes CD burning capabilities (including Napster, Audible, or other online music store software), you may need to do a Repair installation of iTunes.
If iTunes still does not recognize audio CDs after you try these steps, it is possible that third-party software has installed device filters on your computer that are contributing to this issue. Learn more about device filters and how to resolve issues they cause.
To assist Apple in identifying affected drives, please provide feedback by running CD Diagnostics in iTunes
Click here for more information.
iTunes for Windows: Can't Import or Play Music From Audio CD
Thank you for using Apple Support Communities.
Regards,
Sterling

Unable to read/write CDs/DVDs

I have a Sony DVD RW DW-U10A combo drive. I have been unable to write CDs for a few weeks now, but manage with my MacBook. Now however, the drive in the iMac doesn't see either blank or written CDs, or professionally produced CDs. This also applies to all DVDs.
The only, but major, change that I have made is to upgrade to Tiger. I cannot categorically link the problem with the upgrade.
Could this be the cause of the problem? What can I do to be able to read/write CDs while using Tiger?
How can I clean the CD lense if that is also contributing to the problem?
Thanks in advance
PG

Hello and Welcome to Apple Discussions.
You really need to repost over in the MacBook forums. The hardware is very different.
http://discussions.apple.com/forum.jspa?forumID=1172
regards
mrtotes

Function module to read all the views of material data

Dear all ,
       Is there any function module to read all the views of material data ?
       Like we have MATERIAL_MAINTAIN_DARK for updating all the views of material data , I need a function module to read all the views of material master.
Thanks & Regards
Shivanand

Hello,
Check these BAPI'S
<b>BAPI_MATERIAL_DISPLAY          Display Material
BAPI_MATERIAL_GET_DETAIL       Determine Details for a Material</b>
Regards,
Vasanth

10.5.7 Won't Read Audio CDs?

I installed 10.5.7 a couple of days ago. All went well and continues to do so except for 1 minor quirk, none of my audio CDs can be read by the dvd drive, I have managed to burn both CD and DVDs though using toast 8, but I'm unable to read audio CDs new AND old. Anyone one else having trouble with Audio CDs? [DVDs are fine]
Macbook 10.5.7, 4 gig ram 160gig hd

First, my MBP plays CDs fine, so it's not 10.5.7, at least in my case.
What happens when you insert an audio CD? Does it appear at all on the desktop?
Try a PRAM reset.
AFAIK, the lasers for reading CDs and DVDs are different. CDs use a 700nm laser, DVDs a 640nm.
The lasers for burning are different again.
It's just possible that the CD laser in your drive is not working.
Other than a PRAM reset, I am not sure what you can do.

Tecra 9100 won't read burned CDs

Hi.
I have a Tecra T9100 and the MAT****A DVDROM now won't*read burned CDs.
It has no problems when reading manufactured CDs / DVDs.
I noticed this after upgrading the BIOS with the 1.6 version.
Is there something else I need to do / configure / install ?
Thank you.

Hi
Maybe you should check different CDs from different manufacturers and should change the burning speed to the slowest one.
If this will not help then a CD/DVD drive issue might be the reason why not all disks are readable.
Cheers

HT2801 My drive reads discs as blank and not reading music cds at all.

My drive is reading start up discs as blank and not reading music cds at all( they just spin in there until I eject them). They're clean, scratch free and ejecting with no problems. I replaced my hard drive three weeks back and need to replace programs and info.

Try
Intel-based Macs: Resetting the System Management Controller (SMC)
<http://support.apple.com/kb/HT3964>

IMac not reading old cds?

My iMac (late 2009) is reading some CDs but not others. I put in the CD, it holds on to it for 30 seconds, then spits out without ever showing up on the desktop. The only difference I can tell between the ones it does read and the ones it doesn't is the age, the old ones it is having problems with (i.e. made in the 90s), the newer ones (maybe roughly 2000 and on) is fine. My work computer can read them fine. Any idea what's up?

Another help source (if you haven't already done so).
Go to your OS Help Menu. In the search field type dvd
Click on all the troubleshooting topics & Support Articles that pertain to your issue.
You can also do the same in Disk Utility. Open same up.
At the bottom left of the window, click on the purple button w/the "?" in the middle.
This will bring up the Help Menu.
===============
Try a different brand. Top forum favorites
CDs
FUJI
TDK
Verbatim
DVDs
Maxell
Verbatim
==============
Apple's Disc Burning Quick Assist
Make sure the DVDs are not dirty, smudged and/or scratched.
http://support.apple.com/kb/TS2000 Mac doesn't start up from install disc
http://support.apple.com/kb/HT2801 Apple Computers: Troubleshooting the slot-loading SuperDrive
*** Your drive may need cleaning. Cleaning kits can be purchased from any store that sells CD/DVDs. ***

Superdrive has stopped reading DVDs/ CDs!

Hello helpful people, i am having various problems with my emac with regard to reading DVDs etc. all of a sudden my drive no longer accepts any of my DVDs and struggles to read audio CDs. when i insert a DVD (that worked fine a week ago) i here a clicking noise and after about 5 seconds it just spits it back out. i initially thought it might be a scratch on the disk itself but then realised that it other DVDs were also being rejected. Audio cds occasionally work but this is often after alot of unpleasent noises and long wait. Does my superdrive need to be replaced or is there anything else i can do?
please help.
emac PowerPc G4 (1.1) Mac OS X (10.3.9)
emac Mac OS X (10.3.9)

Welcome to the discussions.
The very first thing I would do is Repair Permissions.
This will many times resolve a minor glitch.
Other times it may require you to reset the Pram.
Have a look at Gullivers recommendations on System Maintence.
http://discussions.apple.com/thread.jspa?messageID=607640&#607640
To reset Pram, look below.
http://docs.info.apple.com/article.html?artnum=2238
Cheers Don

Vaio SVE15115FXS Won't read dvd/cds

Recently my Viao (model referenced in title) stopped reading dvds/cds. The tray ejects and the disc spins for a few seconds and then nothing. The drive is not listed in Explorer. I uninstalled the drive and restarted the PC but did not fix the problem. I've been searching for hours on how to repair this. Any advice you guys can provide is greatly appreciated. Thanks

Hi SkeeterTia,
Welcome to Sony Community!
Kindly follow the troubleshooting guidelines here to isolate the issue further. Here's the link: https://us.en.kb.sony.com/app/answers/detail/a_id/41595/c/65,66/kw/41595
Please let me know the result.
Hope the link helps.
Thanks,
Vincent
If my post answers your question, please mark it as "Accept as Solution"

ITunes 5 upgrade does not read my cds

I think I went to the wrong section. Here is what I asked, anyone williong to help. Many thanks.
Hi! It is my first posting here since I bought my PowerBook. No problems until I upgraded (through the automatic software upgrade) last week to iTunes 5. I was running ok iTunes and I could play my cds while working, however, now with this last upgrade iTunes does not recognize the audio cds and it does not show up in the left "source" window. What is going on? How do I solve this problem? is it necessary to downgrade (and how do I do it)? Thanks in advance for your kind help:D

I'm having a related problem. iTunes 5 reads commercial CDs ok but CDs burned previously using older versions of iTunes are no longer associated with my library -- so the tracks don't come up with names/artists etc.
does anyone out there know how to restore the pointer / link that associated the playlist filename with the file in the iTunes library?? I've looked at http://docs.info.apple.com/article.html?artnum=93952 and have located the CD Info.cidb file in my Library > Preferences -- but what do I do next?
iTunes 5 automatically accesses CDDB but it obviously cannot find my custom mix in the database.
It does read the burned CD OK and will play it.
These are CDs burned from "regular" (not Smart) playlists using an older version of iTunes. The playlists still exist on iT5 and all the songs are still in the library.
I'm assuming this has something to do with the fact that iTunes 5 has relocated the files (?)
Thanks -- I've been searching around for the solution but no luck so far.
Karen

Reading old CDs

We have CDs dating from 2000 with information we want to keep. Right now I can't find a computer that will read the CDs. When I put it into my G4 OS 10.4.7, it spits it back out. When I put it on a G4 OS 10.3.9, it doesn't show up and won't eject it. When I put it on a G3 OS 9.2.2, I get the message it is unreadable, but at least it will eject.
Any suggestions on what to do to find something to read these old CDs?
Thanks.
Linda

"it doesn't matter if the disk were formated for a Pc, the mac should be able to read it."
That is not always a true statement. Many machines will not recognize some audio CDs, for example.
If one machine will recognize a CD and another will not, then the logical thing is to look at the differences between the machines. In this case, none of the computers recognize a mountable directory of files or contents.

Hp dvdwbd ts-lb23l ins´t reading andy dvd.... but it reads audio cds. is there any solution?

My laptop is: HP entertainment model dv7 - 3180us (Windows 7, 64 bits)
The dvdRom-BluRay is not playing andy dvd.
But it still reads Audio CDs
Any solution.

Hi,
Try following the procedure under the sub-heading 'Let me fix it myself' on the link below to remove the Upper and Lower filters and see if this helps the issue.
http://support.microsoft.com/kb/982116
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Read ABAP CDS view data in HANA CDS view

Similar Messages

Maybe you are looking for