Read and save settings from instruments

Currently, the 'save config' case saves the data read from the user interface (in the 'aggressor settings' tab)
how can I change this 'save config' event so that;
- Read all the insturment settings from hp8133s and hp8648 (along with GPIB addrs)
- Load into the user interface
- Save to a file (*.ini)
Thanks,
Attachments:
Pulse Channel with Load and Save_no event_v09.4.6.llb ‏2917 KB

I have created this case, "load instrument settings"
First four settings are from hp8133A voltage output.vi (from instrument library)
and the last two pulse setting VIs were modified version from voltage output.vi
I have created an array to gather all output values, but don't know how to pass it on to the front panel...
could you please advise on how to accomplish this?
Attachments:
Pulse Channel with Load and Save_no event_v09.4.13.llb ‏3169 KB

Similar Messages

User exit in SAPMV50A to READ and SAVE TEXT from PO

Hi Experts,
I have an requirement for "Copying PO Header Text to Delivery Text". I have already created TEXT ID's , Access Sequence and assigment to Delivey type in VOXTN.
Could you please suggest "User exit in the delivery program SAPMV50A, tcode VL01N, to READ and SAVE TEXT from PO.
In the user exit I will user READ_TEXT FM using the custeom id created.
Thanks
Krishan

vofm

How do I use Migration Assistant to get my Mail and Keychain settings from

How do I use Migration Assistant to get my Mail and Keychain settings from my Power Mac G5 2.3Ghz? I just purchased a new 2.5 MacBook Pro which will be delivered tomorrow, and I want to to know how to transfer Mail and Keychain?
Thank You in advance for your reading and replying.
Kindest Regards,
Sebastian

Rather than using Migration Assistant, which can cause trouble with the PPC to Intel change, simply boot the G5 in FireWire target disk mode and manually transfer the following:
/Home/Library/Keychains (copy the whole folder)
/Home/Library/Mail (copy the whole folder)
/Home/Library/Preferences/com.apple.mail.plist
You might want to look over Kappy's helpful guide for migrating, which covers the full process for a manual migration (including the above files).
Hope this helps...

I bought a used iphone 4 today. how to transfer all my old and important data including apps and email settings from old iphone 3gs to the used iphone 4?

i bought a used iphone 4 today. how to transfer all my old and important data including apps and email settings from old iphone 3gs to the used iphone 4? that means, making the iphone 4 just like the iphone 3gs?

Well, you sink everything on your 3GS onto your laptop/computer. Then you reset your iPhone 4. When you are restarting it, add all those apps music (ect) On to it. It seems difucult but for more info call Apple. I did that and he lead me step by step on how to do it. Well hope this helped~~

HT201274 i tried to erase all content and reset settings from the device option.it is taking too long and its been 15 hours but not yet done.its showing a skeleton sigh with buffering and sometimes flipping to apple sign.

i tried to erase all content and reset settings from the device option.it is taking too long and its been 15 hours but not yet done.its showing a skeleton sigh with buffering and sometimes flipping to apple sign.

nabidhadi wrote:
.its showing a skeleton sigh with buffering and sometimes flipping to apple sign.
You iPod has been jail broken. Unfortunately you are on your own here. I can offer that you need to find out which method and software was used to JB.
Good luck...you're gonna need it....

Migration of files,programs and configuration settings from Powerbook G4

How does one move files, programs and configuration settings from a G4 Powerbook running OSX 10.4.11 to a late 2008 unibody Macbook since there is no firewire capability to use for a target disk.

If you previously created an user account on the MacBook, open the Users folder, find the folder you migrated, drag it to the desktop, authenticate yourself if needed, and then move the files from the folder on the desktop to the corresponding locations in your home folder.
(30421)

BUG in PE 13- cannot open and save projects from PE11!!!!!!!

For 1 month I'm requesting a TECH Support to resolve a BUG in Adobe Premiere Elements 13 that cannot load and save projects from PE11. I already provided all details several times (about my PC system & exact steps to reproduce a problem, etc) & posted in this PE forum as well.
Adobe is the WORST company I have ever came across that shows NO SUPPORT for its clients. Not only they don't have a phone line, but lacking in providing its clients with other channels to contact Tech Support (if such exists??) via emails or a chat. It is unheard of that a company would SELL its products, collected money & then had NO responsibility to correct problems they introduced. SHAME on you! I will post this opinion in Facebook and everywhere. I will warn people they should beware on spending money on Adobe horrible products where a company refuses even support these products and where a company only relies on common users who also already spent money and now experiencing all sort of problems. Unbelievable!
Adobe team, if you are not helping with resolving your last bugs, you should at least send me a link for the old PE11 that I could finish my projects. I hope that someone will finally contact me

Please see- http://barbarabrundage.com/2010/11/29/using-photoshop-elements-9-with-iphoto/
Thanks
Andaleeb

How to open and save pictures from 1 folder at the same time?

Is there a way to open and save pictures from 1 folder at the same time?
I'm creating a vi that resizes the picture but I want to do it with 1 folder at a time... Is this possible?
greetings!

Hi Kway,
Here you are. I wrote a file a customer times ago & It did what you want!
Just see the attachements and keep me inform.
Regards,
Julien Roland - District Sales Manager
NI Belgium - Technical Support
Don't forget to rate a good answer
Attachments:
Test existing Files.vi ‏23 KB
Delete files from array of files (SubVI).vi ‏16 KB

Creating a external content type for Read and Update data from two tables in sqlserver using sharepoint designer

Hi
how to create a external content type for Read and Update data from two tables in sqlserver using sharepoint designer 2010
i created a bcs service using centraladministration site
i have two tables in sqlserver
1)Employee
-empno
-firstname
-lastname
2)EmpDepartment
-empno
-deptno
-location
i want to just create a list to display employee details from two tables
empid firstname deptno location
and same time update in two tables
adil

When I try to create an external content type based on a view (AdventureWorks2012.vSalesPerson) - I can display the data in an external list. When I attempt to edit it, I get an error:
External List fails when attached to a SQL view
Sorry, something went wrong
Failed to update a list item for this external list based on the Entity (External Content Type) 'SalesForce' in EntityNamespace 'http://xxxxxxxx'. Details: The query against the database caused an error.
I can edit the view in SQL Manager, so it seems strange that it fails.
Any advice would be greatly GREATLY appreciated.
Thanks,
Randy

Need quick TIP: remove "Copy access and configuration settings" from added package

I added a modified package in APPVMAN with the option "Copy access and configuration settings".
Package is unpublished. But shows AD groups as a current package because I used the option "Copy access and configuration settings"
QUESTION:
How to Remove (and then add) the option "Copy access and configuration settings" from added package.
Cannot find it.
Thanks.
--- When you hit a wrong note its the next note that makes it good or bad. --- Miles Davis

sorry for the panic :)
before publishing an updated package to existing groups of initial package I hit the option
"Copy access and configuration settings".
But first I wanted to test it for TEST group. Didn't think that AD settings will be applied (do it first time).
Just to confirm:
1. I will remove current groups from updated(unpublished package)
2. Will add Test group and test the package.
3 In case it is OK I can then add removed(needed) groups.
I want to be sure that after removing and adding needed groups all other settings will be intact.
Thanks.
--- When you hit a wrong note its the next note that makes it good or bad. --- Miles Davis

How to read and save complex data (amplitude and phase) from pna E8361C

Hi, all,
I installed the PNA series driver to my PC. And I got wavefrom from the PNA but always the amplitude. How can I get also phase info from the PNA and save it to my text file?

I did installed the driver for that PNA, I can select the format such as amplitude or phase, but I can only see one of them at one time.
Could it be seen and save simultaneously?

Get and save image from camera

Hi I need to grab an image from a camera and save it in a known format (such as TIF). What is the best way to do this in LabView. We are using an EDT camera via a PCI DV C-Link http://www.edt.com/pcidv_cl.html. Appreciate any help/ guidance.

EDT says:
Do you have Labview drivers? Matlab? IDL? Others?
Not
directly. Our API is designed to allow programmers to build
functionality into their applications, and all hooks are available to
make EDT API subroutine calls from drivers for third party packages,
but we do not provide the drivers ourselves. Some drivers are available
from other providers; see our Partners page.
So you will need to use the Call Library Function Node to integrate their Drivers DLL into your LV. How to save the images then in a standart format depends on the data format you get from their driver.
Using an NI Framegrabber would be easier
Christian

Read and write data from content repository .

Hi All,
We are using content repository to store some document and images on web center server .
So we have created/setup a content repository on web center .
Please proivde me some documnet /wiki page to get some idea how can i read and write date in
content repository .
You are most welocme to provide some idea /suggestion .
Thanks,
Arun.

Have you already configured webcenter spaces so it can use content server?
Have you installed the content server seperatly from webcenter or as a part of the webcenter installation?
Check if you have the webcenter spaces component installed in content server because without i don't think it will work...
If you already have configured UCM to work with spaces it's quiet easy.
From your groupspace, open the settings page of your groupspace. Go to the services tab. In the left hand side you can enable the documents services. WHen you have done that, you are able to add the document services taskflows to your pages. Just go to a page in your pagegroup and edit it. Open the resource catalog and you will find some extra taskflows you can add.
If you haven't configured UCM and webcenter to work together, here some steps that will help you:
* Integrating UCM with Spaces
     * They both need to use the same LDAP store.
     * Since there is no LDAP server available, we choose for embedded WLS LDAP.
     * Integrating the ucm into apache
          * Stop UCM
          * In /oracle/product/wls10320/WebCenter/ucm/config/config.cfg, check the SocketHostAddressSecurityFilter to contain 127.0.0.1
          * Add the SocketHostAddressSecurityFilter to /oracle/product/wls10320/WebCenter/ucm/admin/bin/intradoc.cfg
          * Add to /oracle/product/wls10320/WebTier/instances/instance1/config/OHS/ohs1/httpd.conf
               include /oracle/product/wls10320/WebCenter/ucm/data/users/apache22/apache.conf
          * Change the mod_wl_ohs.conf file to
               <IfModule weblogic_module>
                     WebLogicHost localhost
                     WebLogicPort 7001
                     Debug ON
                     WLLogFile /tmp/weblogic.log
               </IfModule>
               <Location /webcenter>
                  SetHandler weblogic-handler
                  WebLogicCluster localhost:8888
               </Location>
               <Location /webcenterhelp>
                  SetHandler weblogic-handler
                  WebLogicCluster localhost:8888
               </Location>
               <Location /owc_discussions>
                  SetHandler weblogic-handler
                  WebLogicCluster localhost:8890
               </Location>
               <Location /em>
                  SetHandler weblogic-handler
               </Location>
               <Location /console>
                  SetHandler weblogic-handler
               </Location>
               <Location /consolehelp>
                  SetHandler weblogic-handler
               </Location>
          * Restart UCM & WebTier
          * Test URL: http://yourServer:7777/idc
     * Configure the Identity Store for UCM & WebCenter
          * Set the password for the embedded ldap in WLS
               Console => Domain Name => Security tab => Embedded LDAP tab => reset credentials
          * Restart AdminServer
          * Stop UCM
          * Add the following to /oracle/product/wls10320/WebCenter/ucm/config/jps-config.xml
                  <serviceInstance name="idstore.oid" provider="idstore.ldap.provider">
                      <property name="subscriber.name" value="ou=myrealm,dc=webcenter_domain"/>
                      <property name="idstore.type" value="WLS_OVD"/>
                      <property name="security.principal.key" value="ldap.credential"/>
                      <property name="security.principal.alias" value="JPS"/>
                          <property name="ldap.url" value="ldap://yourServer:7001"/>
                      <extendedProperty>
                          <name>user.search.bases</name>
                          <values><value>ou=people,ou=myrealm,dc=webcenter_domain</value></values>
                      </extendedProperty>
                      <extendedProperty>
                          <name>group.search.bases</name>
                          <values><value>ou=groups,ou=myrealm,dc=webcenter_domain</value></values>
                      </extendedProperty>
                      <property name="username.attr" value="uid"/>
                      <property name="user.login.attr" value="uid"/>
                      <property name="groupname.attr" value="cn"/>
                  </serviceInstance>
          * In the same file, change the serviceInstanceRef ref="idstore.ldap" to "idstore.oid"
          * Go to /oracle/product/wls10320/WebCenter/ucm/custom/FustionLibraries/tools
          * ./run_credtool.sh
               Alias: default
               Key: default
               User Name: cn=Admin
               Password: weblogic123
               JPS Config: default
          * Start UCM
          * Check Provider:
               * Go to http://yourServer:7777/idc
               * Login : sysadmin/idc
               * Administration -> Providers
               * jpsuser should be good
               * When a ldapuser exist, disable it!!
     * Configuring UCM for content search
          * Change the file /products/WebCenter11gR1/WebCenter/ucm/config/config.cfg
              SearchIndexerEngineName=DATABASE.METADATA to SearchIndexerEngineName=DATABASE.FULLTEXT
          * Restart UCM server
          * Run the /products/WebCenter11gR1/WebCenter/ucm/database/oracle/admin/batchsnippet.sql in the wcbepsc_ocserver schema
          * Restart UCM server
          * Open the /products/WebCenter11gR1/WebCenter/ucm/bin/RepositoryManager (sysadmin/idc)
          * Recreate the indexes
     * Registering UCM with WebCenter
          * Go to http://yourServer:7777/em
          * Login with weblogic/weblogicPassword
          * Go to WebCenter - WebCenter Spaces - webcenter (WLS_Spaces)
          * From the top menu, select Settings - Service Configuration
          * Select Content Repository
          * Add
               Connection Name: ucm_connection
               Repository Type: Oracle Content Server
               Active Connection: checked
               Administrator User Name: sysadmin
               Root Folder: /WebCenterSpaces
               Application Name: Spaces
               CIS Socket Type: Socket
               Server Host: localhost
               Server Port: 4444
               Authentication Method: Identity Propagation
          * Restart WLS_Spaces
     * Test the connection by creating a new group space and upload a document to the document page of this group spaceHope this helps.

How to read and write data from json file from windows phone7 app

Hi
I am developing wp7 app for the use of students my questions are
How can i write a code to read and write the json/text file for the wp7.
I am using windows 7 OS, VS 2010 Edition.
This is my code below:
xaml:
<Grid>
                    <TextBlock Height="45" HorizontalAlignment="Left" Margin="7,18,0,550" Name="textBlock1" Text="Full
Name: " />
                    <TextBox Width="350" Height="70" HorizontalAlignment="Left" Margin="108,1,0,0" Name="txtName"
Text="Enter your full name" VerticalAlignment="Top" />
                    <TextBlock Height="45" HorizontalAlignment="Left" Margin="6,75,0,0" Name="textBlock2" Text="Contact
No: " VerticalAlignment="Top" />
                    <TextBox Width="350" Height="70" HorizontalAlignment="Left" Margin="108,61,0,480" Name="txtContact"
Text="Enter your contact number" MaxLength="10" />
                    <Button Content="Register" Height="72" HorizontalAlignment="Left" Margin="10,330,0,0" Name="btnRegister"
VerticalAlignment="Top" Width="190" Click="btnRegister_Click" />
                </Grid>
xaml.cs:
private void btnRegister_Click(object sender, RoutedEventArgs e)
            string name, contact;
            name = txtName.Text;
            contact = txtContact.Text;
            try
                if (name != "" && contact != "")
                    string msg = name + " " + contact;
                    MessageBox.Show(msg);
                    Student stud = new Student
                        Name= name,
                        Contact = contact,
                    string jsonString = JsonConvert.SerializeObject(stud);
                    MessageBox.Show(jsonString);
                else
                    MessageBox.Show("Input Proper Information", MessageBoxButton.OK);
            catch (Exception ex)
                MessageBox.Show(ex.Message);
I have download NewtonSoft.json version 5.0.8.
So, I am able to convert input data into json format, but how can I able to write and read this data from a json/text file.
How can I do?
Thank you in adv and please, reply soon.

We don't have many samples left for Windows Phone 7 + Azure, the closest one to what you want to do is probably:
Using Local Storage with OData on Windows Phone To Reduce Network Bandwidth
this sample uses the local database feature: 'LINQ to SQL', available to Windows Phone 7.1 and 8.0 Silverlight applications, instead of simple file storage but even if you choose to stick with simple file storage I believe you should be able to adapt the
networking related portions of the sample to your particular application.
Eric Fleck, Windows Store and Windows Phone Developer Support. If you would like to provide feedback or suggestions for future improvements to the Windows Phone SDK please go to http://wpdev.uservoice.com/ where you can post your suggestions and/or cast
your votes for existing suggestions.

I want to change subject line and save emails from others

For instance my client may respond to an email question and I want to change the subject line because it includes an answer such as clients address, but I cannot figure out how to change the subject line and save it to my file folder I have for them.

This add on claims to do that.
https://addons.mozilla.org/en-US/thunderbird/addon/edit-email-subject/?src=ss
There might be others but that is the first one that came up. I have never used it so I cannot speak for how well it works.

Read and save settings from instruments

Similar Messages

Maybe you are looking for