Read CRM Business Partner Classification data from buffer/memory

Hi,
Can anybody help me to read CRM Business Partner Classification data from buffer/memory ? I have a Z- function module in BDT but inside that, I am not able to read the classification data(4th tab). I have the Partner nu,mber and GUID.
Thanks and regards
Arijit Ghose

Hi JE,
Please let me know if you find the solution to this problem.
Regards,
Himanshu Sharma

Similar Messages

Transfer of Business Partner Master data from CRM to TIBCO.

Hi All,
We intend to integrate CRM4.0 with TIBCO for transfer of Business Partner Master data from CRM to TIBCO.
Can anyone provide solution for the same. One of the think is through XI.Please correct if it is the right way to do it?.
Also, would appreciate if someone can provide documentation or links for integration.
Regards,
Mehul Shah.

Hi Rahul,
Yes you can integrate CRM and TIBCO using XI.
Check the below links
transfer the Business Partners from the CRM system to XI and to MDM.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/406efa7e-388a-2910-f9b8-81913b0ca57f
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/50260ae5-5589-2910-4791-fc091d9bf797
any XI content delivered by SAP can be found in the SAP service marketplace which you can enter http://www.sap.com/services/bysubject/servsuptech/index.epx.
a) After you entered the service marketplace go to Software Download under the header SAP Support Portal.
b) Next navigate to Download -> Support Packages and Patches -> Entry by Application Group
c) In the main window select SAP Content and then Process Integration Content (XI Content).
d) Now you should see a list of XI content packages.
The package containing XI content for CRM is
XI CONTENT BBPCRM
In addition you find some packages that offer mappings from CRM interfaces to industry standards like RosettaNet or STAR standard, like
XI CONTENT ROSETTANET CRM
XI CONTENT STAR CRM
Some of these packages may require a license, therefore I am not sure if they are visible to you.
As per my knowledge, XI has CRM pre-delivered content and usually it communicates thru Proxies,Http, RFCs..
And in your scenario , you can always go for Proxy communication
Have a look into these threads
CRM and SAP XI
SAP CRM integration with XI
How to access the pre-delivered XI Integration Content for APO ,SCM or CRM
Dont forget to Reward points if this helps
Regards
Pragathi.

Transfering business partner master data from R/3 to Business one

hi all,
can anyone have an idea about how to transfer the business partner master data from SP R/3 to SAP Business One.
Plz tell me in details..
regards
nirdesh panwar

Hi Nirdesh,
The easiest way is to ask SAP R/3 for an export file of some sorts. This is usually an XML or text type file. You will then pick this file up where they have put it and import it. You can import it into SAP Business One with your own developed (vb, c#, etc.) application that you write using SAP Business One's DI API.
Hope it helps,
Adele

Creating a business partner using data from a remote legacy system

Hi Experts,
I am trying to make an interface for creating a business partner in SAP CRM from customer data created in a remote legacy system. I want to map the fields in XI.
But to create a customer I need a RFC or a BAPI or maybe an IDoc, that includes all fields for business partner creation and can create a new business partner from the data.
I have identified an RFC that have the structure of the BDoc BUPA_MAIN. This RFC is called: CRM_BUPA_MAIN_CRM_IN
But I am not sure if that RFC can be used for Business Partner creation.
Can anyone tell me if that RFC can be used, or if there are other RFC's, BAPI's or IDoc's that can be used for remote creation of business partners (they have to include all fields of the Business Partner)??
There are a few BAPI's that include some of the fields for BP creation, but making several calls to different BAPIs from XI to CRM is not an option (I thought the BAPI: BAPI_BUPA_FS_CREATE_FROM_DATA could have been used, but it lacks some of the data fields needed for creating BPs).
Thanks in advance,
Torsten
Edited by: Torsten Sander on Apr 22, 2008 2:48 PM

Hi Experts,
I am trying to make an interface for creating a business partner in SAP CRM from customer data created in a remote legacy system. I want to map the fields in XI.
But to create a customer I need a RFC or a BAPI or maybe an IDoc, that includes all fields for business partner creation and can create a new business partner from the data.
I have identified an RFC that have the structure of the BDoc BUPA_MAIN. This RFC is called: CRM_BUPA_MAIN_CRM_IN
But I am not sure if that RFC can be used for Business Partner creation.
Can anyone tell me if that RFC can be used, or if there are other RFC's, BAPI's or IDoc's that can be used for remote creation of business partners (they have to include all fields of the Business Partner)??
There are a few BAPI's that include some of the fields for BP creation, but making several calls to different BAPIs from XI to CRM is not an option (I thought the BAPI: BAPI_BUPA_FS_CREATE_FROM_DATA could have been used, but it lacks some of the data fields needed for creating BPs).
Thanks in advance,
Torsten
Edited by: Torsten Sander on Apr 22, 2008 2:48 PM

CRM Business Partner Master Data Extraction

Hello Friends,
I would like to extract the complete Business Partner (BP) information in CRM onto application server in csv format.
Could you pls let me know if there are any standard programs or Function Modules which helps me to extract complete data.
Also let me know the useful master tables associated in this regard. Pls let me know the posible ways of extraction.
Thx in Advance
Regards
Vijay

Hi Masayuki,
Thank you for your suggestions. Those pointers helped me to resolve this. Retrieving the Logical Document Id is also good.
I called the FM you suggested using the PARTNER_GUID from BUT000 in field BUSINESS_OBJECT-INSTID and with TYPEID='BUS1006' and CATID='BO'. This returned the Document links and I was able to get the Properties by calling SDOK_LOIO_PROPERTIES_GET.
Much appreciated.
Malcolm

Company Code info in Business Partner Master Data

Dear all,
We are creating customer in CRM (5.0) system, which are flows down to back End ECC (6.0) system.
now the requirement is company code and reconciliation details need to be maintained while creating customer master data, this info is a prerequisite to create sales orders in ECC and subsequent processes.
We don't know how to maintain finance data in CRM Business Partner Master data.
Please educate me how to maintain the required data, and what config need to done to solve our purpose.
your suggestions will be highly appreciated.
Thank you,
Raghu ram.

HI
To my knowledge you cant maintain company code data in CRM, you can maintain general and sales area data from here and extend the company code data only in r/3.
Regards,
Karunakar.

Business partner change Valid From Date field

How can I change the Valid From Date field in tables:
BUT000
BUT020
BUT0BK
BUT100
Currently the of date of creation of the business partner is in this tables' Valid From field.
In transaction BP the Address of the Business Partner is valid from 01.01.1990 but still I get a warning that the business partner is not valid for date 01.11.2011.

Sounds like the problem is the valid to date. What is that date set to?

Align Employee Business Partner Master Data Between SAP HR and SAP CRM

We have been using SAP R/3 since 1999 and crm since 2004, in 2008 we implemented SAP HR. Historically our employee data (for those business units using CRM) has been maintained in CRM directly however since the HR implementation all employees now exist in HR and the companies whole organisational structure exists there also. I am implementing a new CRM project for a business unit that has never had crm before and as a result there employees do not exist in CRM. I am thinking about leveraging our recent HR implementation to take this business units employee data from SAP HR into CRM rather then have to create this data again in CRM. Is it possible to filter the integration between hr and crm to facilitate the transfer of a specfic subset of employees eg from one specific business unit? If so how is this achieved? Are there any negative impacts of such an approach.
Thanks in advance
Eddie

Hello Eddie,
I hope the following notes 312090 and 1259797 will help to answer your queries. The note 312090 speaks in details about the various filters.
Best Regards, Adil

Reading Data from Buffer

Hi all,
I have a custom RFC which makes use of IDOC_INPUT_BOMMAT to create a BOM.But the BOM is not yet committed and i need to retrieve this data.If i put a break-point after the call to the FM IDOC_INPUT_BOMMAT and at the same time check the database table it's not yet present in the table.We tried all methods but could not succeed.Please let us know if the data can be read through buffers.If so which FM should i use to get this data .. ?
Cheers
Nishanth

Hi,
I don't think you will be able to read the data from buffer. Even if you can find it, getting the right strcutures for the data you are looking for will be very tedious.
Regards,
Ravi
Note :Please mark the helpful answers

Adding new Field in Business Partner General Data

Hi All,
I'm working on a mySAP CRM 4.0 implementation.
I would like to extend the business partner data with this new three field:
1) Capital Stock
2) Base Number
3) Sales pl.
The three field are Dun & BradStreet information.
I created a BSP that show all Business Partner General Data and now we want to show also those fields.
In order to extend the BP data we received two suggestion:
The first one is to use the BP marketing Attributes.
The second is to use the Easy Enhancement Workbench.
I know that advantages of the EEW is the automatic creation of the layout (BSP & DYNPRO).
Doo you have any suggestion??
It's a good solution to use the EEW??
Thanks a lot.
Eugenio

Hi,
First of all thanks a lot for the fast reply.
I have to add some information:
The end-user will use the application only in PC-UI mode (through Enterprise Portal).
We are customizing the BSP application (Accounts).
I know that in past some colleagues used the EEW to extend or to add some field to application BP. I remember that the field (after Enhancement the new fields was visible in SAPGUI mode and in BSP mode).
Now my questions are the following:
1) Are you sure that I can use EEW only 10 times??
2) We are using the BAPI (CRMXIF_PARTNER_SAVE) in order to add Business Partner in the system; after the creation of the new fields with EEW the BAPI (CRMXIF_PARTNER_SAVE) will be able to insert the new fields?? Or we need to extend this BAPI with new fields?
The second question is very important for us because we have to import in the system about 30.000.000 of Business Partners.
Kind Regards.
Eugenio.

Hiding the business partner search parameter from search criteria

Hi,
I have business partner search parameter whose value is hardcoded in the lead search..
I would like to hide the business partner search parameter from displaying only..
I need to achieve it programatically and not in configuration and all.
Do I need to write the code in P method or which method?
Thanks
Madhukar

Hi,
The code is as below and I just need to have the functionality of BP search field intact but hide it from display in web UI..if any correction is required let me know..
***current date is populated into LV_DATE
DATA lv_date TYPE string.
lv_date = sy-datum.
***current user login name is populated into LV_SUNAME
DATA lv_suname TYPE string.
lv_suname = sy-uname.
***Fetching the BP ID of the current user who logged into L_PARTNER
DATA:l_partner TYPE bu_partner.
CALL FUNCTION 'CRM_ERMS_FIND_BP_FOR_USER'
    EXPORTING
      iv_user_id = sy-uname
    IMPORTING
      ev_bupa_no = l_partner.
***structure for BUT051
TYPES : BEGIN OF ty_data,
           relnr    TYPE bu_relnr,
           partner1 TYPE bu_partner,
           partner2 TYPE bu_partner,
           date_to TYPE bu_datto,
         END OF ty_data.
***work area for BUT051
DATA wa_but051 TYPE ty_data.
***Fetching Dealer BP ID which is 'PARTNER1' field in BUT051
SELECT relnr
         partner1
         partner2
         date_to
FROM but051
INTO wa_but051
UP TO 1 ROWS
WHERE partner2 = l_partner.
ENDSELECT.
***Geting the dealer BP ID into LV_DEALER
DATA lv_dealer TYPE string.
lv_dealer = wa_but051-partner1.
DATA: lr_qs          TYPE REF TO cl_crm_bol_dquery_service,
        lr_search_node TYPE REF TO cl_bsp_wd_context_node_asp,
        lr_col         TYPE REF TO if_bol_bo_col ,
        lr_iterator    TYPE REF TO if_bol_bo_col_iterator ,
        lr_param       TYPE REF TO if_bol_bo_property_access,
        ls_selection   TYPE genilt_selection_parameter,
        lv_low         TYPE sy-datum,
        lv_attr_name   TYPE name_komp ,
        lv_value_set   TYPE abap_bool .
IF iv_first_time EQ abap_true.
* to initialize the search view.
    CALL METHOD super->do_prepare_output
      EXPORTING
        iv_first_time = iv_first_time.
* fetch the search node and its content.
    lr_qs = me->get_current_dquery( ).
    lr_col = lr_qs->get_selection_params( ).
* check the currently visible search attributes.
    lr_iterator = lr_col->get_iterator( ).
    lr_param    = lr_iterator->get_first( ).
    WHILE lr_param IS BOUND.
* get the parameters
      lr_param->get_properties( IMPORTING es_attributes = ls_selection ).
      IF ls_selection-attr_name = 'VALID_FROM'.
* SET_PROPERTIES
        ls_selection-low = lv_date.
        CALL METHOD lr_param->set_properties
          EXPORTING
            is_attributes = ls_selection.
        lv_value_set = abap_true .
        EXIT.
      ENDIF.
      IF ls_selection-attr_name = 'BU_PARTNER'.
* SET_PROPERTIES
        ls_selection-low = lv_suname.
        CALL METHOD lr_param->set_properties
          EXPORTING
            is_attributes = ls_selection.
            lv_value_set = abap_true .
        EXIT.
      ENDIF.
      lr_param = lr_iterator->get_next( ).
    ENDWHILE.
    IF lv_value_set EQ abap_false .
* it was not part of the visible attributes, then add it at the end.
      CALL METHOD lr_qs->add_selection_param
        EXPORTING
          iv_attr_name = 'VALID_FROM'
          iv_sign      = 'I'
          iv_option    = 'EQ'
          iv_low       = lv_date.
      CALL METHOD lr_qs->add_selection_param
        EXPORTING
          iv_attr_name = 'BU_PARTNER'
          iv_sign      = 'I'
          iv_option    = 'EQ'
          iv_low       = lv_dealer.
    ENDIF.
* for a proper display of the added / changed attribute.
    lr_search_node = get_dquery_cnode( ).
    lr_search_node->build_parameter_tab( ).
ELSE.
* non first time call - just delegate to superclass.
    CALL METHOD super->do_prepare_output
      EXPORTING
        iv_first_time = iv_first_time.
ENDIF.

Relink CRM Business partner with customer in ECC

Hi all,
In our organization, most business partner master data is automatically replicated with ECC.
Table BUT0ID contains the link between a BP and customer on ECC.
For some reason it happens regularly that a CRM BP gets a wrong link.
I.e. BP 80001234 is by accedent linked to 80001000, but it should be 80001234.
I'm asked to provide a solution to change this link.
With BAPI's 'BAPI_IDENTIFICATION_DELETE', 'BAPI_IDENTIFICATION_CHANGE' and/or 'BAPI_IDENTIFICATION_REMOVE' it's easy to modify table BUT0ID properly.
But whatever I change, the replication is still carried out on the wrong customer.
Afters hours of debugging and tracing I couldn't find the reason. Is there perhaps an other table to change?
Did any of you have the 'golden tip' for me to fully Relink?
Thanks a lot in advance,
Sijmen

Hi Sijmen,
Try FM bupa_identification_change. Ii think that will work for you.
Thanks,
Kumar.

'Role Data' tab appearing twice in Business Partner master data

Hello,
The 'Role Data' tab is appearing in the master data of business partner for TWO times. The contents of both the tabs are identical. So I know that the only thing that I probably need to fix is the screen sequence. I have followed note 695714 and could not find anything wrong. Can someone please help me with the following queries:
1. Identifying where we maintain the tab sequence for business partner master data, ie the transaction code or the path in BDT
2. What is the name used in BP for the 'tabs'... I mean they are not called TABS but I suppose as Screens or Screen Sequence. So, what is the correct name for a Tab in BP master data.
3. How I can hide the extra tab of Role Data from the BP master data screen
4. How do we control the sequencing of the tabs, ie whether the address tab should be the first one or the third one or the last one.
Regards
Suvarghya Dutta

Hi Kiran,
Can you post the query here, which you used in fromatted search.
I believe you mean to say that by this formatted search, user will have flexibility to choose the field and enter the search value.
thanks in advance,
Samir Gandhi

Business Partner - Valuation Data Ratings

Hi
On the Business Partner - > Valuation Data -> Ratings screen, I need to suppress th change of the ratings without graying it out.
Do you have an idea of what BAdi to use or approach to follow will be appreciate.
Kind Regards,
Nhlanhla Ndlovu

Hi
You can get this by using BDT concept...
1. use BUPT area
2. find the screen you want to play with bus5
3. get the sections under this screen using bus4
4. get the view from bus3
5. under this view you have different modules (PBO/PAI), you can also copy and alter this modules.
6. make use of further checks options to do validations.
I have BDT manual with me, in case if you need please send me a test mail.
Thanks
Manohar

Add a custom field to Business Partner(master data screen)

Hi MM experts,
My requirement: Basically have to pass special accounting number (from FI module to MM module ). For that, we need to create new custom field in the standard screen (master data) of business partner.
How to achieve this?
Is that by creating field exit (create a new field in the standard screen and updating business partner master data with this special accounting number)? IF so, could you please explain how to achieve this little bit clearly?
THANKS IN ADVANCE... YOUR INPUT IS HIGHLY APPRECIATED.

Hello Solemn,
You should catch the FormLoad event of form 134 (Business Partner), and add a static text and editbox. In addition, you need to do the data binding right after adding the item.
Or, you just use the standard UDF function of B1.
Hope this helps,
Nick

Read CRM Business Partner Classification data from buffer/memory

Similar Messages

Maybe you are looking for