Read error messages before save

Hello,
Do you know any way to read the error messages before saving a document?
I want to read them in the method EH_ONSAVE of BT120H_CPL/OVViewSet view.
Any idea?
Best Regards
JM

This is a known bug that will be fixed in beta 7. You should only get that error message the first time after updating Firefox. If you are getting it all the time, are you switching between different versions of Firefox?
Do you still have an earlier version of Firefox installed, and if you do does it use the same [[profiles|profile]] as the beta version. If you do that can cause problems since Firefox 4 handles extensions in a different way than earlier versions of Firefox. If you do have 2 versions of Firefox installed, you need to use 2 different profiles.

Similar Messages

  • Where to control and give error message before saving trade promotion?

    Hi Gurus,
    our CRM system is upgraded from 5.0 to 7.0 and we have some problems. One of them is, in 5.0 version, we check some conditions and display error message in the AUTHORITY_CHECK method of CRM_MKTPL. So the check is made and message displayed if errors found while entering the trade promortion, at the beginning. And it does not allow any save action too. After upgrade I write this code to CHECK_AUTHORITY method of  CRM_MKTPL_OL_OBJ. Now it is not make a control while a trade promotion is entered, so it doesn't stop saving trade promotion although there are errors. I can stop saving maybe in the method of CHECK_BEFORE_SAVE? But how can I display own check messages at the beginning of trade promotion? Please give idea.

    Astron,
    There are multiple BADIS for the Trade Promotions.
    Use CRM_MKTPL_OL_OBJ for Header Valiadtions and CRM_MKTPL_OL_ASG for the Item (assignment block validations).
    You need to use CHECK_ATTRIBUTES method of these BADIs to raise any errors.
    Just append you message to ET_MESSAGE_LOG and set EV_HAS_ERRORS to 'X'.
    If you need an error message on SAVE, use CHECK_BEFORE_SAVE method of the CRM_MKTPL_OL_OBJ BADI and append the messages and Mark REJECT_SAVE to 'X'.
    Further there are many methods that trigger on different events like Status change etc.,
    Regards,
    Masood Imrani S.

  • Error message before all values are entered in Step and Repeat box

    The Step and Repeat function seems to have a problem that it didn't have before.
    (1st field REPEAT COUNT, 2nd field HORIZONTAL OFFSET, 3rd field VERTICAL OFFSET). It is not permitted to duplicate beyond the limits of the document or pasteboard, I understand that. But, if a large value is already entered, let's say 3' in the 3rd field and you enter 12 in the first, you will get an error message BEFORE YOU EVEN HAVE TIME TO COMPLETE ALL THE FIELDS AND THEN SAY OK. The reason I bring this up is that it was not this way before Leopard (or before CS3) and I suspect that it is either the Mac OS or CS3 that is causing problems. I should be able to enter all the values in the 3 fields (whatever was previously entered the last time), say OK then get a message if the values go overboard. Not before I even finish entering them!
    Is this a known issue, or is it just me?
    Thanks

    It's a known issue with CS3 - I believe it existed in Tiger too.

  • Imovie 11 on macbook pro get error message cannot save project changes

    imovie 11 on macbook pro get error message cannto save project changes:
    Please check the disk to ensure there is enough free space and you have permission to write projects. iMovie will try to save periodically, but your changes will be lost if you quit iMovie before the problem is resolved.  I have 462 GB disc space available.  I don't know about "permission to write projects".

    OK - bad luck about that. I hope you weren't too far advanced into your project. Sorry to hear that repairing permissions didn't help.
    When working on a long project, it's advisable to duplicate the project from time to time. In Project Library view click on your project then select File>Duplicate Project from iMovie's menu. A number will be appended to the name of the duplicate, otherwise you can rename it. A short-cut is to control-click (or right-click) on the project name, then select Duplicate Project from the pop-up menu. Duplicating doesn't take up much extra space, as the project points to the clips in the Event (or Events) and doesn't contain actual video as such (it's basically a text file which also holds information about your edits, added photos, music, titles and so forth).
    Also, it's best to have a backup, such as Time Machine. It gives you peace of mind when things go wrong!
    John

  • Bought 2nd ipod nan0, computer keeps reading error message? is there a quick fix for this?

    Bought a 2nd ipod nano , computer keeps reading error message? is there a quick fix for this?

    There are a lot of different error messages, which one are you getting. Verbatim with the number please.

  • Getting Accessiblity Error Message before Recording Software Simulation...

    In Captivate 7, I go to start a brand new software simulation (chrome screen) in OSX and I get the following error message:
    Before recording application applications, select 'Enable Access for Assistive devices' in 'System Preferences' > 'Accessibility'.
    The pics below show the red screen capture box and the error I get when I try to capture when trying to capture the screen. Also included is a pic showing accessibility is enabled.
    I have no idea where this is coming from.

    ...and here's the answer:
    http://captivatecrazy.blogspot.com/2014/01/record-new-software-simulation-in-adobe.html

  • Reader error message when accessing documents on other websites

    have repaired adobe reader twice, still get "adobe reader error" message when trying  to access my visa acct. run vista home basic. What is problem. Also seems to cause windows to close IE on me through  daa execution program. I am a thoroughly confused computer nerd on this.

    We cannot know. Your information is way too vague to make any sense of it and the whole affair sounds utterly unrelated to Adobe software in the first place. Perhaps some security tool running amok, perhaps simply a missing system library, perhaps a failed install. Who's to say?
    Mylenium

  • Unable to convert pdf to any other format. Tried cloud as well as acrobat reader. Reader error message "unable to contact service" and Cloud message "conversion error". I tried multiple pdf documents and checked security settings on all of them. Help Plea

    nable to convert pdf to any other format. Tried cloud as well as acrobat reader. Reader error message "unable to contact service" and Cloud message "conversion error". I tried multiple pdf documents and checked security settings on all of them. Help Please!

    Hi skydivingsnowman,
    I'm sorry you're having such trouble using the ExportPDF service. What browser are you using?
    Please try clearing your browser cache, or using a different browser (here's a list of supported browsers:   http://www.adobe.com/acom/systemreqs/.
    Please let me know if that works.
    Best,
    Sara

  • Bind to AD error message "cannot save password"

    After loading Lion, I can not join/bind to my Windows Active Directory.  I acts like it is binding and then I get the error message "cannot save password"  It never binds.  It does create the computer account in AD though.

    Is this a Toshiba thing or an Microsoft Question?
    It's a Microsoft question. Take it here.
       Microsoft Discussion Groups
    -Jerry

  • NFC works sometimes and keeps showing read error messages

    I have just bought a brand new Sony Xperia Z3 Dual (D6633), but I am having a little boring problem. When I pair my smartband or any other equipment trough NFC it just works after some attempts and keeps showing read error messages every time. It seems to me that is a software issue as it works sometimes. How should I proceed?

    Unfortunattely it didn't work, as our credit cards in Brasil don't have NFC technology.
    I will try to reset my phone to factory defaults as soon as Lollipop is launched so I reinstall my apps just one time.
    If I fix with the firmware update I´ll let you know. If this issue persist I will take to Sony Support Service in my city.
    Thanks a lot for your concern.

  • Reader error message attempt to access invalid address

    I posted my original question in the wrong forum.  When trying to open a pdf with reader I received a message saying "attempt to access invalid address.  Per the response on that forum I uninstalled reader and ran the programs at this link http://labs.adobe.com/downloads/acrobatcleaner.html  I then restarted the computer and reinstalled reader.  During installation I got an error message #150210.  More help?

    Hi Julie,
    I have seen this issue fixed for some users by modifying the following registry key:
    The key is "HKLM\System\CurrentControlSet\Control\Session Manager\Memory Management" MoveImages
    Set the key to 1 instead of 0 then reboot the machine.
    In case you still face the issue try the following registry key change:
    The only thing you have to do is rename the following key at the REGEDIT, and everything will be fine !!
    BEFORE:
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Image File Execution Options\iexplore.exe
    AFTER:
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Image File Execution Options\iexplore.old
    Note: Please take a backup of the registry before attempting this change.
    Regards,
    Rave

  • SDD install and disk read error message

    I recently bought an HP Envy 17T 3200 Notebook. I wanted to upgrade the primary drive to an SSD. I bought a Sandisk Extreme brand new. I installed this in the primary bay. I used the recovery disks to restore the computer as I have done in the past with other HP laptops I've owned.
    It went through all five disks and seemed to recover fine. When the fifth disk was finished, I rebooted the computer after removing the disk and received an error message:
    "A disk read error occurred. Press Ctrl+Alt+Del to restart".
    Thinking I had a bad drive, I bought an Intel 520 Series SSD. I replaced the Sandisk with the new Intel drive. I repeated the process above. I installed everything and actually booted into Windows for the first time. I shut the computer down temporarily. A few moments later, I rebooted and again had:
    "A disk read error occurred. Press Ctrl+Alt+Del to restart".
    The odds of TWO SEPARATE SSDs being bad are remote. Something else is going on here. I ran diagnostics on the disks and they both passed with flying colors. For now, I have the original disk back in the primary bay and the computer is running fine.
    Has this happened to anyone? Do I have corrupt recovery disk files? What can I do?

    Hello
    I'm writing this response although its an old post, since a quick search on google told me that alot of people have similar issues to this.
    I will post my solution to the problem, hoping that it will help people who have this issue.
    Description of problem; Just as OP, i was upgrading my primary harddisk on my Envy 17 to an SSD, and when i put the disk in it would not accept it, stating "A disk read error occurred. Press Ctrl+Alt+Delete to restart".
    As the SATA cable was functioning fine with the old Harddisk, i ruled that out.
    Next thing i tested was wether the system would accept the harddisk if i pre-installed windows on it, before connecting it, this did not resolve the problem either.
    I also reset the BIOS, did nothing.
    Fustrated over this problem i acted on a hunch and disassembled the whole computer, cleaned it thoroughly and replaced the thermal paste on the heat sinks for the GPU and CPU. I also replaced the Fan on the cooling system (a simple cleaning may do the trick as well) Turned on the laptop with my new SSD in and voila, it accepted the disk and proceeded to start up windows.
    I have never encountered a computer that simply wouldnt read a disk due to overheating issues, But it fixed my problem, so i'm a happy camper
    Note that disassembling a laptop is an advanced job, if you are not comfortable doing it by yourself you should not attempt to do so.
    By the way. This may or may not fix the issue for you, as far as i can tell this error can be the symptom of alot of issues, but if you suspect that your laptop may be overheating, this might be the solution.

  • Adobe Reader error message, "The application was unable to start correctly(0xc000007b)"

    Upon start up of my PC, an error message occurs that states, 'The application was was unable to start correctly(0xc000007b)" Reader isn't functioning properly and any programs that require it cannot be used(i.e. itunes, etc)  My computer operating system is windows 7, 64 bit. The reader came with the computer. I am an unskilled pc user but can follow written instructions to troubleshoot. thanks in advance for any help you may give!

    I hope its okay that I am resending my earlier question. I have attempted  all of the suggestions to fix the problem with Adobe Reader but so far nothing has worked. Is there anything else I can try? Thank you for your help!
    Upon start up of my PC, an error message occurs that states, 'The application was was unable to start correctly(0xc000007b)" Reader isn't functioning properly and any programs that require it cannot be used(i.e. itunes, etc)  My computer operating system is windows 7, 64 bit. The reader came with the computer. I am an unskilled pc user but can follow written instructions to troubleshoot. thanks in advance for any help you may give!
    My Reader version was an older one , so I downloaded the latest on the website. I shut down and restarted the computer but the error notice is still present.
    Also, when I attempted to open Reader in protected mode, the following error message appeared ," Fatal Error Acrobat failed to load it's core DLL.
    I downloaded the anti malware program at adobe help and ran the scan, restarted the computer and the error message still pops up. Are there any other actions you might suggest?

  • PDF won't open on Mac with Adobe Reader Error message:Adobe Reader could not open

    I have Adobe Reader 10.1.3 for Mac, (10.7.3) and am having problems opening pdfs.  I get an error message: Adobe Reader could not open file name.pdf because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded). The files are not from emails, but are from websites, government sites, professional organizations etc.)  Help! Adobe is no help!

    Manually download the files to your computer (right-click on the url). When the file is downloaded to your computer do you get the same message when you try to open in Reader through the File->Open menu? What about when you open the file in Mac's Preview application?

  • ITunes library.itl cannot be read error message after new installation

    Hi,
    I have just downloaded iTunes to install on a new Lenovo laptop running Windows 8.1, and after installation I have received the following error message "iTunes library.itl cannot be read because it was created by a newer version of iTunes".
    It was a 'clean' installation - I did not have any previous versions installed and have not yet copied my music across to the laptop or connected by iPod.
    Any suggestions?
    Thanks

    Try the following user tip:
    Empty/corrupt iTunes library after upgrade/crash

Maybe you are looking for