Read error when closing bridge
When closing bridge I sometimes get an error for bridge.exe.
That an read operation couldn't be done and that something with the addresses was wrong. I will post the exact error message as soon as I get it again.
This is in Bridge CS4. But I remember having the same or a similar problem for CS3.
Thanks in advance
Edit:
Please note that this is only when closing bridge and hasn't happened for any other Adobe program yet.
Also I cannot open Bridge after the error has occurred.
Some other Adobe products (Photoshop, After Effects) don't seem to open either after the error message.
Doesn't seem to be the problem.
I closed a couple of times with the wheel still spinning and everything went fine.
I haven't had the error since I posted this thread.
Maybe it was a three-times-only-thing...^^
But I've found other forums about a similar problem just with other programs, so I thought it might be something not related to Bridge. Still it only happens when closing Bridge.
Hope it's gone.
While opening an closing i've taken some looks at the new icons and i have to say that the CS3 ones looked way better.
Similar Messages
-
We're getting an error when closing workbench -- below is information from the log:
!MESSAGE Bundle update@plugins/org.eclipse.emf.compare.diff_0.8.0.v200806180301.jar was not resolved.
!MESSAGE Missing required bundle org.eclipse.emf.compare.match_0.0.0.
Does anyone know why we would be getting this error?
Thanks,
JanisCould I know which version of Workbench you are using? Was it installed as a
standalone or an Eclipse plugin? Any other plugins you have installed?
Regards,
Long Liu
2011/3/26 Janis Wolf-Pittel <[email protected]>
>
We're getting an error when closing workbench -- below is information from
the log:
>
!MESSAGE Bundle update@plugins/org.eclipse.emf.compare.diff_0.8.0.v200806180301.jar
was not resolved.
!MESSAGE Missing required bundle org.eclipse.emf.compare.match_0.0.0.
>
Does anyone know why we would be getting this error?
>
Thanks,
Janis
> -
Error when closing down (NetworkUXBroker.exe)
I get this error when closing down Win 10. Just to let you know...
NetworkUXBroker.exe
The instruction at 0x00007FFDA03BB070 referenced memory at 0x000000CA1AD04F0Error message when closing down computer
Ainslie Collison - 09:03pm Sep 12, 2008 Pacific
Adobe photoshop downloader boot will not shut down automatically when I close down the computer. What settings can I change. I cannot find anything to help in edit/preferences. I have the starter edition. -
Adobe Reader error when downloading a Form (IMM5257E - required for CIC - Canadá)
I received an error when downloading a file viwh the Adobe Reader version 11.0.07.
A message like this appear:
To view the full contents of this document, you need a later version of the PDF viewer.Pat Willener!
GREAT THANKS! GREAT THANKS! GREAT THANKS!
I was using Google Chrome, and did not suspect that this could be the
problem.
I used I.E. and the download worked. So that's it.
Great thanks again.
Vilson Drehmer
Rua Balduíno Pedro Vier, 693
CEP 95.880-000 - Estrela - RS
Fone: (51) 8401.2253
E-mail: [email protected] <[email protected]>
CRA-RS 6364
2014-05-28 5:26 GMT-03:00 Pat Willener <[email protected]>:
Adobe Reader error when downloading a Form (IMM5257E - required for
CIC - Canadá) created by Pat Willener<https://forums.adobe.com/people/pwillener>in *Adobe
Reader* - View the full discussion<https://forums.adobe.com/message/6414530#6414530> -
Error when closing Service Call
Error message is occuring when trying to close / update a service call.
'No related record found [Service Calls - Contact Person] [Message 60156-18]
and
'Removing activites from service call not allowed'
Some history to the BP which may be linked
1 business partner was created
2 service messages and activities where created
3. Bp was accidently deleted
4. BP was reinstated
5. Old service messages have error when closing
Any solutions on how to update the service call - so it can be closed?Hello Lisa,
I have came across this issue before. I suggest that a messaged be logged with the SAP Support Team. They may need to get a copy of the database to verify this.
Regards,
Lorna Real -
HT1222 my ipod reads error when trying to sync with itunes
my ipod reads error when trying to sync to my itunes
Hello, TheHelper1964.
Thank you for the question. There could be multiple causes to the errors that you are receiving. I have included a couple articles that will help you troubleshoot this issue.
iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert
http://support.apple.com/kb/TS2690
iOS: Troubleshooting backup issues in iTunes
http://support.apple.com/kb/TS2529
If you are uncomfortable processing some of these steps, you can also reach out to us at http://expresslane.apple.com.
Hope this helps,
Jason H. -
Read error when reading the master data of 0EMPLOYEE on demand, attribute 0
Hello All,
While loading data for HR data source 0HR_PA_OS_1 i am getting the below error message..
Error 1 in update.
Read error when reading the master data of 0EMPLOYEE on demand, attribute 0COMP_CODE
Please let me know how can it be resolved.
Regards
Rohit PartiThe problem occurs during data load from R/3. It was not occuring before. When I go to check the PSA contents I get a runtime error - GETWA_NOT_ASSIGNED.
Error analysis
You attempted to access an unassigned field symbol
(data segment 32821).
This error may occur if
- You address a typed field symbol before it has been set with
ASSIGN
- You address a field symbol that pointed to the line of an
internal table that was deleted
- You address a field symbol that was previously reset using
UNASSIGN or that pointed to a local field that no
longer exists
- You address a global function interface, although the
respective function module is not active - that is, is
not in the list of active calls. The list of active calls
can be taken from this short dump. -
Getting tcp/ip read errors when I receive an email
Hi
I have been having problems with a copier that scans to email. My production GWIA is too busy to monitor so I brought up another gwia to test with the copier. Its across a wan and used to work just fine. If they scan 1-6 pages it sends just fine. If they scan 9 or more it connects, stays connected for quite awhile and then disconnects with out a file getting sent. The TCP/ip read err incriments. We took the 12 pages and sent to a desktop to see how big the file was it its 400kb. I can copy a file over the wan in ~30 sec. The connection for email stays up for much longer than that.
I checked the nic on the server and its clean.
Very curious why I get the read error when its trying to write the file.
Thanks,
WillHi,
391783263 wrote:
> Very curious why I get the read error when its trying to write the
> file.
SMTP is a chain of commands and responses, alternating between sender
and receipient.
Example:
GWIA: Hi, I'm here.
Sender: Hello, I'm scanner.
GWIA: Hey, that's cool, how can I help.
Sender: Please accept MAIL FROM: [email protected]
GWIA: Will do, go ahead.
Sender: And please send that mail to RCPT TO: [email protected]
GWIA: I know that one, so I'll happily take it.
Sender: So here comes the DATA
GWIA: Ok, go ahead and send it, line by line. Once you're done, please
send me a single dot on it's own line so I know you're doe with it all.
Sender: Blabla, blabla.....
more blablalala
and even more blablaba
Gwia: Cool, I have that.
Sender: Cool, we're done. So I QUIT.
Gwia: Bye-Bye.
So now, if for some reason that nice little chat gets interrupted for
whatever reason, and at *whatever* stage, it simply depends on whose
turn it was to talk. If it was GWIA's turn to talk, and it found the
connection broken, you will get a TCP write error (because GWIA was
attempting to "write" something. If however it was the senders turn to
"talk", and it simply never did, or the connection broke down, you'll
receive a tcp read error, because GWIA was expecting to "read" something
from the other end, but nothing ever reached it.
In 99,999% of all cases, this is a low-lever TCP/IP communication
problem, regardless if it's a read or write error. Do *NOT* look at your
GWIA, you'll find nothing. Look at TCP/IP.
CU,
Massimo Rosen
Novell Product Support Forum Sysop
No emails please!
http://www.cfc-it.de -
Error when closing Adobe Reader
When closing a pdf-document opened by Adobe Reader I get often (not always) the error window
Problemsignatur:
Problemereignisname: BEX
Anwendungsname: AcroRd32.exe
Anwendungsversion: 9.3.3.177
Anwendungszeitstempel: 4c1d77af
Fehlermodulname: Updater.api_unloaded
Fehlermodulversion: 0.0.0.0
Fehlermodulzeitstempel: 4c1d65ab
Ausnahmeoffset: 6f59da0f
Ausnahmecode: c0000005
Ausnahmedaten: 00000008
Betriebsystemversion: 6.1.7600.2.0.0.768.3
Gebietsschema-ID: 1031
Zusatzinformation 1: ac2d
Zusatzinformation 2: ac2d4d93f130824cf6e0604c6efd7140
Zusatzinformation 3: fc43
Zusatzinformation 4: fc432586ebf8c5580efaba8ac38abb52
Lesen Sie unsere Datenschutzbestimmungen online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0407
Wenn die Onlinedatenschutzbestimmungen nicht verfügbar sind, lesen Sie unsere Datenschutzbestimmungen offline:
C:\Windows\system32\de-DE\erofflps.txt
I have deinstalled and installed the reader but there is the same effect.Mozilla doesn't host any Adobe programs for downloading.
Adobe support is here.
http://forums.adobe.com/index.jspa -
DDE Server Window error when closing CS2
When closing out of Photoshop and Bridge I get the following error:
DDE Server Window:photoshop.exe (or bridge.exe)-Application error.
Then it reads in that window the following: The insturction at "0x7c9105f8" referenced memory at "0x025c0010". The memory could not be "read"
This has occured ever since I downloaded the Adobe upgrade recently.Was this problem ever resolved? Its happening for me now.
-
i have FF 23.0.1, when i close the browser [Press the X on the top right] i get the error: "The instruction at ..... referenced memory at ...... The memory could not be written"
I have windows XP.
The issue occurs only when closing the browser, does not happen when opening it.Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you. -
Hello,
I have a problem occuring when closing "content blocks" like widgets etc in Web UI.
A shortdump called OBJECTS_OBJREF_NOT_ASSIGNED appears:
ST22 says that the line, where the error occurs is the following one:
lv_xml = ir_controller->configuration_descr->get_config_data( ).
I will copy the whole method program code for overview.
Method Handle_Close:
DATA:
ls_config_data TYPE bsp_dlc_ovw_assgnm_xml,
lv_xml TYPE bsp_dlc_xml,
lr_tray TYPE REF TO bsp_dlc_ovw_assgnm,
lv_sequence TYPE numc4,
ls_parameter TYPE ihttpnvp,
lt_parameter TYPE tihttpnvp.
* get personalization
lv_xml = ir_controller->configuration_descr->get_config_data( ).
CALL METHOD cl_bsp_dlc_config_ovw=>conv_xml_to_data
EXPORTING
iv_xml = lv_xml
IMPORTING
rt_data = ls_config_data.
* read ID of entry to hide
lv_sequence = iv_index.
READ TABLE ls_config_data-views REFERENCE INTO lr_tray
WITH KEY sequence = lv_sequence.
* don't do anything, if the requested entry can't be found
IF sy-subrc IS INITIAL.
* hide entry
lr_tray->traymode = gc_hidden.
* Save the changed configuration
lv_xml = cl_bsp_dlc_config_ovw=>conv_data_to_xml( ls_config_data ).
ir_controller->configuration_descr->set_config_data( iv_config_data = lv_xml
iv_personalization_for_user = sy-uname ).
It is a standard report. On development system it first works, but I look for differences to production system and in the user role display the crmui_navbar-function profile was different and I changed that value to the one from production system and it doesn't work furthermore. But when I change back the value to the old one, it do not work, too.
Hopefully you can help me with this issue. I have to say I am new to this topic at all and do not find anything on SDN or in web to solve this problem.
Best regards
FabianDear Madhavi,
we just upgraded our CRM-systems. The problem is now solved. So it seems to be one of these hundreds of oss-notes, which are installed with the patches.
I'm sorry for this unsatisfying answer! We now are on release:
WEBCUIF 700 0011 SAPK-70011INWEBCUIF
So probably you should show these WEBCUIF content for problems or update it.
Best regards
Fabian -
Firefox application error when closing 0xc0000005
Hi I've been getting errors every so often when closing firefox.
This is what I'm seeing http://i.imgur.com/VO3sA.jpg?1
I've been looking for a way to solve this error and figure out what is causing it. My search has brought me here. Some details.
This crash doesn't happen every time I close firefox
I can't find a way to "make" it happen when closing it to reproduce it but it happens fairly often. I could go 2-3 days without it happening, the next day it might happen 3 times.
The error only happens when closing firefox, it does not crash.
Been happening for months.
Reinstalled firefox many times
The extensions I use are:
adblock plus 2.2.2
noscript 2.6.4.4
I've gone to about:crashes in my browser and looked at the most recent crash and found something odd. It lists 2 crashes for the same time.
1 is (this one is showing up as firefox verison 17.0.1)
ID:9fb71784-ba7b-4925-9de4-608e12130202
Signature: F_2060112065______________________________
2nd is (this one is showing up as firefox verison Firefox 18.0)
ID: 5ff65935-890a-4541-bd20-ac9b12130202
Signature: F2102588022______________________________________________________________________________________________________
Does this mean I have 2 firefox verisons installed and running at the same time? Only one shows up in task manager. So what do these crashes mean and why are the crash reports listing two verisons?
Thanks for the help.It happen because of Malware/Virus problem.
Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us! -
I have found that when closing the editor which automatically opens the organizer, sometimes the photo does not appear in the Organizer with a gray border around it indicated it has been edited and without the changes made in the editor having been made to the photo. I sometime need to try three times before the edited changes will "stick". I have noticed, however, that the file extension (edited 1...edited2...edited 3...etc.) changes even though it does not appear edited in the Organizer. I have also gotten a message about an "IAC error" associated with this problem, though not ever time.
Very frustrating break (brake) in the workflow. Any ideas?Thanks very much for your suggestion and quick response, however,
it does not solve my problem. The routine I generally use to exit the Editor is
File > Close which then launches the Save As routine.
I tried using the Save As and then the close, but it does not consistently
appear in the Organizer as edited. I am wondering if there could be some
thing wrong with the location settings for temporary files?
I appreciate any help!!! -
As stated previously...I have removed and re-installed Firefox, but am still getting "script error" when shutting it down and going to "restore session" when opening. Please advise what to do about this problem. Thank you.
Firefox 21 and Firefox 22 running on Windows 7 have been reported to take a long time to "wake up" from sleep. I realize hibernation is different than sleep, but... this is the closest match for your description.
Some users have reported that this problem is resolved in Firefox 23 (currently in beta). Others have had inconsistent luck with minimizing Firefox before letting Windows sleep and other measures.
Please check out this (very long) thread for more information: [https://support.mozilla.org/questions/961898 browser freezes after resuming from sleep]
Or jump to the part about Firefox 23: https://support.mozilla.org/questions/961898?page=3#answer-457321
The fact that this just started recently suggests perhaps it is related to another program or update, but I don't think anyone has confirmed the exact interaction that causes the problem.
Maybe you are looking for
-
Outputting via SDI to DigiBeta thru Blackmagic Decklink Extreme
I'm running Final Cut Pro 5.1.2 on MacOS 10.4.8. I've edited a 23.98FPS - DVCPro50 sequence. I can preview using the Decklink Extreme card fine. I can output via compenent out to a regular beta deck (UVW-1800) just fine, which is also the deck I use
-
Buttons not showing up in all browsers.
I created a site in Dreamweaver which incorporates a Flash swf on the first page of the site. There is just one nav (Enter) button near the bottom of the page. When viewing on Safari and Firefox the button shows up and functions. When viewing in Oper
-
All I get is a folder called "links from the united kingdom" containing three more folders which are the first second and fifth in my IE favourites list.
-
HT2534 I can't find the "None" Option in the payment option, what should I do?
I'm setting up my Apple ID to register it to App Store but as I continue to my Payment option, I can't find the "None" option. I don't have a credit card so I won't can't fill up the card number or something. How can I continue with this?
-
This is all I know.