Read fixed domain vales in reports

hi all,
how to read the fixed domain values in report without using standard tables and fm?
{what is the code for this .}
I created table with field having fix domain values ,
now i want to Print that Fixed domain values in Report ,how can i get these without using standard tables and function modules.
like dd7....type......
kindly advice ..

try to make it Possible ,
because ,,,,, it is Possible ....not impossible.
so .....
okkay read it ...
Create a table with two fields u2013 client and employee id
      ( can be a two digit no like 10,11,12 etc ). In domain of
      the employee id field maintain some fixed values.
Write a report that will read and display the fixed
        values maintained in the domain.
Moderator message: please do not ask exam/interview questions.
locked by: Thomas Zloch on Oct 6, 2010 6:03 PM

Similar Messages

Update Deployments not showing up on Read-Only domain controllers

At several of my remote sites, I have a server08 machine functioning as a read-only domain controller and a server share dist point. We're using a software update point to deploy microsoft patches and it's been working fine with the exception of the read-only domain controllers. When I run the complaince report, they correctly show that they need updates but the icon never appears. Clients at their sites are receving updates.
Anybody have any ideas?
thanks!

Yes, I know this is an old post, I’m trying to clean them up. Did you figure this out, if so how?
http://www.enhansoft.com/

Cannot Login to Read Only Domain Controller

One of my Read Only Domain Controller Servers shut down unexpectedly due to a power outage and now I cannot login to it anymore. When the server powered on again, it came up with an error regarding on of the hard drives failing (RAID1)
I get a message Access is Denied when I try to login with one of my domain admin accounts. As it is a RODC, there are no local accounts for me to use. The RODC is running on Windows Server 2008 R2. The server is also running as a DHCP/Print/File server for
the office so these are not working as well.
I checked my PDC and it is coming up with the following error in the event viewer
Log Name: System
Source: Security-Kerberos
Event ID: 4
Level: Error
The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server rodc01$. The target name used was domain/rodc01.domain.local. This indicates that the target server failed to decrypt
the ticket provided by the client. This can occur when the target server principal name (SPN) is registered on an account other than the account the target service is using. Please ensure that the target SPN is registered on, and only registered on, the account
used by the server. This error can also happen when the target service is using a different password for the target service account than what the Kerberos Key Distribution Center (KDC) has for the target service account. Please ensure that the service on the
server and the KDC are both updated to use the current password. If the server name is not fully qualified, and the target domain (domain.local) is different from the client domain (domain.local), check if there are identically named server accounts in these
two domains, or use the fully-qualified name to identify the server.
I have tried to reset the computer password with netdom but I get the following error
netdom resetpwd /server:rodc01 /userd:administrator /passwordd:*
The machine account password for the local machine could not be reset.
Logon Failure: The target account name is incorrect.
The command failed to complete successfully.
If I try to reset the password using the IP address instead, I get the following error
netdom resetpwd /server:192.168.10.1 /userd:administrator /passwordd:*
The machine account password for the local machine could not be reset.
Access is denied.
The command failed to complete successfully.
I checked my AD and DNS and the rodc object is present
If I run repadmin /replsum on the PDC I get the message for the faulty RODC server
Experienced the following operational errors trying to retrieve replication information:
8341 – rodc01.domain.local
Any advice is appreciated
Thanks

Logon to the server in Directory Services Restore Mode (DSRM) using the password you supplied during DCPROMO and verify that the Active Directory database isn't corrupted on the RODC - You will most likely see indications on this in the Directory
Services log.
Enfo Zipper
Christoffer Andersson – Principal Advisor
http://blogs.chrisse.se - Directory Services Blog

Reading data from a crystal report using crystal for eclipse

tried both approaches listed here: [Help needed in reading data from a Crystal Report]
but having the same issues, is this a bug or is there some workaround? cant get any results with rowsetcursor and only the first 100 no matter what i do with browsefiledvalues

Hello,
I have the same problem. I need to know values of last record in CrystalReports and i got only 100 records.
Have you found solution for this problem?

How to read Data of a Webi Report

Hello Friends,
I have a task where I need to read data of a Webi Report, how can it be done?
Basically I have a trigger report which runs every day and get the latest RACN number from the database. I am trying to get that RACN number from trigger report using BOBJ SDK.
I really appreciate your suggestions on this.
Regards,
Rakhy.

Hi Rakhy,
Is the RACN Number a column or dimension in your webi report? Is it a universe object(webi based on universe)
Also what version of BusinessObjects you are using?
If you are using XI 3.1 and you need to retrieve objects from a webi report it can be done using the ReportEngine SDKs.
Please refer to the developers guide and API referrence guide available at
http://help.sap.com/businessobject/product_guides/boexir31/en/resdk_java_dg_12_en.zip
http://help.sap.com/businessobject/product_guides/boexir31/en/resdk_java_apiRef_12_en.zip
Also refer to the document at
http://scn.sap.com/docs/DOC-38618 for better understanding the workflow.
An example snippet of how to retrieve an object is below
=========================================
DocumentInstance wiDoc = widocRepEngine.openDocument(oInfoObject.getID());
ReportDictionary reportDictionary=wiDoc.getDictionary();
for(int a=0;a<reportDictionary.getChildCount() ;a++)
String name=reportDictionary.getChildAt(a).getName();
out.println(name);
=========================================
-Prithvi

Error reading cluster table COIX for report 13BUD1A

Hi All,
We have issue when display report 13BUD1A using t.code CJE0 in ECC6 system. The error message appear as per below:-
Error reading cluster table COIX for report 13BUD1A (ID=13BUD1A KP 01RPSCO_X 0)
Message no. KH050
Diagnosis
The report structure for report 13BUD1A is stored in the cluster table COIX. An error occurred while the system was reading this data (ID = 13BUD1A KP 01RPSCO_X 0).
Table TKEB1 (Report List) contains administration information for report 13BUD1A. Consequently, table TKEB1 has an entry for the report, but table COIX does not.
The error may have resulted following a transport -- COIX has not yet been transported to the current client but TKEB1 is already there.
Procedure
If it is a transport problem, see if you can execute report 13BUD1A in client 000. If so, import it to the current client again.
If it is not a transport problem, delete report 13BUD1A from Tables TKEB1 and TKEB2.
Need you advice, how can we solve this error.
Thank You.

Dear AP,
Thanks for your reply. FYI, we dont have access to client 000. And how to resolve this issue without access client 000?

Option to read fixed-length format, EXCEL or ASCII TAB delimited

Hi Experts,
I have a requirement for giving an option to read fixed-length format, EXCEL or ASCII TAB delimited in the selection screen.Kindly help me how can i read the fixed length format?
Thanks,
Ankita

As far as I could have understood your problem
You have to read the file with
Open dataset 'file path+name' FOR INPUT in text mode encoding default.
and move its contents to string type variable
Transfer to 'file path+name' to v_string.
Now as per your requirements you need to use Offsets to transfer the data into a work area.
For example
wa_task-year= v_string(4).
wa_task-month= v_string+4(2).
Please confirm if this is your requirement.

What is the easiest way to read fixed width ascii files?

There does not seem to be an easy way to read fixed with ascii files in labview. CSV files and other delimited files are easy, but I cannot think of a simple way to read data from a fixed width ascii file.

jgkempen wrote:
There does not seem to be an easy way to read fixed with ascii files in labview.
Reading a file does not depend on its contents. Unless the file is gigantic, you can just read it as one big string and parse it later, especiall if you want the entire contents of the file.
If you only need a subset, you can calculate the offsets and sizes as multiples of your record size. That's the beauty of fixed size records.
It is typically not efficient to read a file in a loop, small portions at a time, so I would not recommend that except in some very specific situations.
Could you be a bit more specific on what exactly you need to do? Is your problem with reading or with parsing the fixed sized records? Could you attach a sample file and some description on what you need to read from it.
Message Edited by altenbach on 09-05-2007 07:50 PM
LabVIEW Champion . Do more with less code and in less time .

[svn:fx-trunk] 13319: Fix FB-25101: Application reported as " unnamed " in the debugger console.

Revision: 13319
Revision: 13319
Author:   [email protected]
Date:     2010-01-06 18:11:29 -0800 (Wed, 06 Jan 2010)
Log Message:
Fix FB-25101: Application reported as "" in the debugger console.
Revert revision 11903, which was supposed to fix SDK-22564: Debug player logs RSL sizes to console using main SWF name. The underlying issue is a Flash player bug (it is sometimes reports incorrect filenames when loading swfs), and my fix was actually a hack to attempt to work around that issue, but it turns out my hack isn't reliable. Backing out the hack. I have logged a separate Flash player bug to fix the real issue.
Ticket Links:
    http://bugs.adobe.com/jira/browse/FB-25101
    http://bugs.adobe.com/jira/browse/SDK-22564
Modified Paths:
    flex/sdk/trunk/modules/debugger/src/java/flash/tools/debugger/SwfInfo.java
    flex/sdk/trunk/modules/debugger/src/java/flash/tools/debugger/concrete/DManager.java
    flex/sdk/trunk/modules/debugger/src/java/flash/tools/debugger/concrete/DSwfInfo.java
    flex/sdk/trunk/modules/debugger/src/java/flash/tools/debugger/events/SwfLoadedEvent.java
    flex/sdk/trunk/modules/debugger/src/java/flash/tools/debugger/threadsafe/ThreadSafeSwfInf o.java

So, I'm trying to strip Reader for domain security

...and I thought I had it completely nailed. I was able to view documents, print, change preferences, everything except the things I don't want people in my domain doing anyway, like executing JavaScript out of a PostScript document. *ahem*
Then I changed... something. And now I get a brief error every time I try to open Edit -> Preferences:
"Failed to load an application resource (internal error)."
I've put back most of the plugins, restored .\Javascripts, reversed most of the Registry changes and cleared every folder called "Adobe" from my test user account, and I'm still getting this error when trying to open prefs. Everything else works fine, like creating a report. Although Reader reports that I'm running Vista when my test system is Win7 amd64 SP1 beta, but maybe I'm splitting hairs.
Oh, also, tWhiteList doesn't seem to work like you'd expect it to. In fact, it doesn't appear to work at all. Does Reader even pay attention to this value any more? Leaving it in because I'm still experimenting with it. Also, the Reader MSI still installs it. Presumably, it has a purpose of some kind.
For no obvious reason, the list of plugins generated from Generate System Report just reports AcroForm several times. About Plugins correctly shows
PPKLite.api
eBook.api
DigSig.api
AcroForm.api
PDDom.api
reflow.api
SaveAsRTF.api
Search.api
I'm pasting the Registry entries directly from the Inno Setup script I'm working on (no one scream, please):
Root: HKCU; SubKey: Software\Adobe\Acrobat Reader\9.0\AdobeViewer; ValueType: dword; ValueName: Launched; ValueData: $00000001
Root: HKCU; SubKey: Software\Adobe\Acrobat Reader\9.0\AdobeViewer; ValueType: dword; ValueName: EULA; ValueData: $00000001
Root: HKCU; SubKey: Software\Adobe\Acrobat Reader\9.0\AdobeViewer; ValueType: dword; ValueName: TrustedMode; ValueData: $00000000
Root: HKCU; SubKey: Software\Adobe\Acrobat Reader\9.0\AVGeneral; ValueType: dword; ValueName: bLastExitNormal; ValueData: $00000001
Root: HKCU; SubKey: Software\Adobe\Acrobat Reader\9.0\AVGeneral; ValueType: dword; ValueName: bAppInitialized; ValueData: $00000001
Root: HKCU; SubKey: Software\Adobe\Acrobat Reader\9.0\AVTracker; ValueType: dword; ValueName: bLoadOnStart; ValueData: $00000000
Root: HKCU; SubKey: Software\Adobe\Acrobat Reader\9.0\FormsPrefs; ValueType: dword; ValueName: bUserAskedToEnableAutoComplete; ValueData: $00000001
Root: HKCU; SubKey: Software\Adobe\Acrobat Reader\9.0\Originals; ValueType: dword; ValueName: bDisplayedSplash; ValueData: $00000001
Root: HKCU; SubKey: Software\Adobe\Acrobat Reader\9.0\Originals; ValueType: dword; ValueName: bBrowserIntegration; ValueData: $00000000
Root: HKCU; SubKey: Software\Adobe\Acrobat Reader\9.0\SDI; ValueType: dword; ValueName: bMaximizeNextDocument; ValueData: $00000001
Root: HKCU; SubKey: Software\Adobe\Acrobat Reader\9.0\SDI; ValueType: dword; ValueName: bNullDocMaximized; ValueData: $00000001
Root: HKCU; SubKey: Software\Adobe\Acrobat Reader\9.0\Security\cDigSig; ValueType: dword; ValueName: bValidateOnOpen; ValueData: $00000001
Root: HKCU; SubKey: Software\Adobe\Acrobat Reader\9.0\Security\cDigSig\cAdobeDownload; ValueType: dword; ValueName: bLoadSettingsFromURL; ValueData: $00000000
Root: HKCU; SubKey: Software\Adobe\Acrobat Reader\9.0\Security\cDigSig\cAdobeDownload; ValueType: dword; ValueName: bAskBeforeInstalling; ValueData: $00000001
Root: HKCU; SubKey: Software\Adobe\Acrobat Reader\9.0\Security\cHandlers; ValueType: dword; ValueName: bVerifyUseAlways; ValueData: $00000001
Root: HKCU; SubKey: Software\Adobe\Acrobat Reader\9.0\Security\cPubSec; ValueType: dword; ValueName: iShowDocumentWarnings; ValueData: $00000001
Root: HKCU; SubKey: Software\Adobe\Acrobat Reader\9.0\Selection; ValueType: string; ValueName: aDefaultSelect; ValueData: Select
Root: HKCU; SubKey: Software\Adobe\Acrobat Reader\9.0\TrustManager; ValueType: dword; ValueName: bEnhancedSecurityInBrowser; ValueData: $00000001
Root: HKCU; SubKey: Software\Adobe\Acrobat Reader\9.0\TrustManager; ValueType: dword; ValueName: bEnhancedSecurityStandalone; ValueData: $00000001
Root: HKCU; SubKey: Software\Adobe\Acrobat Reader\9.0\UsageMeasurement; ValueType: dword; ValueName: bInstalledCleanupCheckDone; ValueData: $00000001
Root: HKCU; SubKey: Software\Adobe\Acrobat Reader\9.0\Workflows; ValueType: dword; ValueName: bNeedSynchronizer; ValueData: $00000000
Root: HKCU; SubKey: Software\Adobe\Acrobat Reader\9.0\Workflows; ValueType: dword; ValueName: bEnableRTCPart; ValueData: $00000000
Root: HKCU; SubKey: Software\Adobe\Acrobat Reader\9.0\Workflows; ValueType: dword; ValueName: bEnableAcrobatHS; ValueData: $00000000
Root: HKCU; SubKey: Software\Adobe\Acrobat Reader\9.0\Workflows; ValueType: dword; ValueName: bEnableWorkflowPart; ValueData: $00000000
Root: HKCU; SubKey: Software\Adobe\Acrobat Reader\9.0\Workflows; ValueType: dword; ValueName: bEnableHSLibrary; ValueData: $00000000
Root: HKCU; SubKey: Software\Adobe\Acrobat Reader\9.0\Workflows; ValueType: dword; ValueName: bEnableRTCAuth; ValueData: $00000000
Root: HKCU; SubKey: Software\Adobe\Acrobat Reader\9.0\Workflows; ValueType: dword; ValueName: bEnableShareFile; ValueData: $00000000
Root: HKCU; SubKey: Software\Adobe\Adobe Acrobat\9.0\DiskCabs; ValueType: dword; ValueName: bCollab_OfflineDocs; ValueData: $00000000
Root: HKCU; SubKey: Software\Adobe\Adobe Acrobat\9.0\DiskCabs; ValueType: dword; ValueName: bCollab_Workflows; ValueData: $00000000
Root: HKCU; SubKey: Software\Adobe\CommonFiles\Usage\Reader 9; ValueType: dword; ValueName: OptIn; ValueData: $00000000
Root: HKCU; SubKey: Software\Adobe\CommonFiles\Usage\Reader 9; ValueType: dword; ValueName: throttle; ValueData: $00000003
Root: HKLM; SubKey: Software\Policies\Adobe\Acrobat Reader\9.0\FeatureLockdown; ValueType: dword; ValueName: bUpdater; ValueData: $00000000
Root: HKLM; SubKey: Software\Policies\Adobe\Acrobat Reader\9.0\FeatureLockdown; ValueType: dword; ValueName: bFedExInternetPrintingEnabled; ValueData: $00000000
Root: HKLM; SubKey: Software\Policies\Adobe\Acrobat Reader\9.0\FeatureLockdown; ValueType: dword; ValueName: bCommercialPDF; ValueData: $00000001
Root: HKLM; SubKey: Software\Policies\Adobe\Acrobat Reader\9.0\FeatureLockdown; ValueType: dword; ValueName: bEnhancedSecurityInBrowser; ValueData: $00000001
Root: HKLM; SubKey: Software\Policies\Adobe\Acrobat Reader\9.0\FeatureLockdown; ValueType: dword; ValueName: iFileAttachmentPerms; ValueData: $00000001
Root: HKLM; SubKey: Software\Policies\Adobe\Acrobat Reader\9.0\FeatureLockdown; ValueType: dword; ValueName: bCreateBuzzwordDoc; ValueData: $00000000
Root: HKLM; SubKey: Software\Policies\Adobe\Acrobat Reader\9.0\FeatureLockdown; ValueType: dword; ValueName: bShowEbookMenu; ValueData: $00000000
Root: HKLM; SubKey: Software\Policies\Adobe\Acrobat Reader\9.0\FeatureLockdown; ValueType: dword; ValueName: bPurchaseAcro; ValueData: $00000000
Root: HKLM; SubKey: Software\Policies\Adobe\Acrobat Reader\9.0\FeatureLockdown; ValueType: dword; ValueName: bUsageMeasurement; ValueData: $00000000
Root: HKLM; SubKey: Software\Policies\Adobe\Acrobat Reader\9.0\FeatureLockdown; ValueType: dword; ValueName: bDisableTrustedSites; ValueData: $00000001
Root: HKLM; SubKey: Software\Policies\Adobe\Acrobat Reader\9.0\FeatureLockdown; ValueType: dword; ValueName: bEnhancedSecurityStandalone; ValueData: $00000001
Root: HKLM; SubKey: Software\Policies\Adobe\Acrobat Reader\9.0\FeatureLockdown; ValueType: dword; ValueName: bCreatePDFOnline; ValueData: $00000000
Root: HKLM; SubKey: Software\Policies\Adobe\Acrobat Reader\9.0\FeatureLockdown; ValueType: dword; ValueName: bBrowserIntegration; ValueData: $00000000
Root: HKLM; SubKey: Software\Policies\Adobe\Acrobat Reader\9.0\FeatureLockdown; ValueType: dword; ValueName: bDisableTrustedFolders; ValueData: $00000001
Root: HKLM; SubKey: Software\Policies\Adobe\Acrobat Reader\9.0\FeatureLockdown; ValueType: dword; ValueName: bAutoFill; ValueData: $00000000
Root: HKLM; SubKey: Software\Policies\Adobe\Acrobat Reader\9.0\FeatureLockdown\cDefaultExecMenuItems; ValueType: string; ValueName: tWhiteList; ValueData: Close|Quit|FirstPage|PrevPage|NextPage|LastPage|ActualSize|FitPage|FitWidth|FitHeight|Sin glePage|OneColumn|TwoPages|TwoColumns|ZoomViewIn|ZoomViewOut|ShowHideBookmarks|ShowHideThu mbnails|Print|GoToPage|ZoomTo|GeneralPrefs|SaveAs|FullScreen|OpenOrganizer|Scan|PageSetup| Find|FindSearch|GoBack|GoForward|FitVisible|ShowHideToolbarEditing|ShowHideToolbarCommenti ng|ShowHideToolbarEdit|ShowHideToolbarFile|ShowHideToolbarFind|ShowHideToolbarForms|ShowHi deToolbarMeasuring|ShowHideToolbarData|ShowHideToolbarPageDisplay|ShowHideToolbarNavigatio n|ShowHideToolbarPrintProduction|ShowHideToolbarRedaction|ShowHideToolbarBasicTools|ShowHi deToolbarTasks|ShowHideToolbarTypewriter|PropertyToolbar|ShowHideArticles|ShowHideFileAtta chment|ShowHideAnnotManager|ShowHideFields|ShowHideOptCont|ShowHideModelTree|ShowHideSigna tures|InsertPages|ExtractPages|ReplacePages|DeletePages|CropPages|RotatePages|AddFileAttac hment|FindCurrentBookmark|BookmarkShowLocation|GoBackDoc|GoForward|DocHelpUserGuide|HelpRe ader|HandMenuItem|ZoomDragMenuItem|CollectionHome|CollectionDetails|CollectionPreview|Coll ectionShowRoot
Root: HKLM; SubKey: Software\Policies\Adobe\Acrobat Reader\9.0\FeatureLockdown\cDefaultLaunchAttachmentPerms; ValueType: string; ValueName: tBuiltInPermList; ValueData: version:1|.7z:3|.ade:3|.adp:3|.app:3|.arc:3|.arj:3|.asp:3|.bas:3|.bat:3|.bz:3|.bz2:3|.cab :3|.chm:3|.class:3|.cmd:3|.com:3|.command:3|.cpl:3|.crt:3|.csh:3|.desktop:3|.dll:3|.exe:3| .fxp:3|.gz:3|.hex:3|.hlp:3|.hqx:3|.hta:3|.inf:3|.ini:3|.ins:3|.isp:3|.its:3|.job:3|.js:3|. jse:3|.ksh:3|.lnk:3|.lzh:3|.mad:3|.maf:3|.mag:3|.mam:3|.maq:3|.mar:3|.mas:3|.mat:3|.mau:3| .mav:3|.maw:3|.mda:3|.mdb:3|.mde:3|.mdt:3|.mdw:3|.mdz:3|.msc:3|.msi:3|.msp:3|.mst:3|.ocx:3 |.ops:3|.pcd:3|.pi:3|.pif:3|.prf:3|.prg:3|.pst:3|.rar:3|.reg:3|.scf:3|.scr:3|.sct:3|.sea:3 |.shb:3|.shs:3|.sit:3|.tar:3|.taz:3|.tbz:3|.tgz:3|.tmp:3|.url:3|.vb:3|.vbe:3|.vbs:3|.vsmac ros:3|.vss:3|.vst:3|.vsw:3|.webloc:3|.ws:3|.wsc:3|.wsf:3|.wsh:3|.z:3|.zip:3|.zlo:3|.zoo:3| .pdf:2|.fdf:2|.jar:3|.pkg:3|.tool:3|.term:3
Root: HKLM; SubKey: Software\Policies\Adobe\Acrobat Reader\9.0\FeatureLockdown\cDefaultLaunchAttachmentPerms; ValueType: dword; ValueName: iUnlistedAttachmentTypePerm; ValueData: $00000000
Root: HKLM; SubKey: Software\Policies\Adobe\Acrobat Reader\9.0\FeatureLockdown\cDefaultLaunchURLPerms; ValueType: string; ValueName: tSchemePerms; ValueData: version:1|shell:3|hcp:3|ms-help:3|ms-its:3|ms-itss:3|its:3|mk:3|mhtml:3|help:3|disk:3|afp :3|disks:3|telnet:3|ssh:3|acrobat:2|mailto:2|file:1|rlogin:3
Root: HKLM; SubKey: Software\Policies\Adobe\Acrobat Reader\9.0\FeatureLockdown\cDefaultLaunchURLPerms; ValueType: string; ValueName: tSponsoredContentSchemeWhiteList; ValueData: notgopher
Root: HKLM; SubKey: Software\Policies\Adobe\Acrobat Reader\9.0\FeatureLockdown\cDefaultLaunchURLPerms; ValueType: string; ValueName: tFlashContentSchemeWhiteList; ValueData: notgopher
Root: HKLM; SubKey: Software\Policies\Adobe\Acrobat Reader\9.0\FeatureLockdown\cHostedServices\cProtectPDF; ValueType: dword; ValueName: bShowMeets; ValueData: $00000000
Root: HKLM; SubKey: Software\Policies\Adobe\Acrobat Reader\9.0\FeatureLockdown\cSecurity\cDigSig; ValueType: dword; ValueName: bValidateOnOpen; ValueData: $00000001
Root: HKLM; SubKey: Software\Policies\Adobe\Acrobat Reader\9.0\FeatureLockdown\cSecurity\cEDC; ValueType: dword; ValueName: bAllowAPSConfig; ValueData: $00000000
Root: HKLM; SubKey: Software\Policies\Adobe\Acrobat Reader\9.0\FeatureLockdown\cSecurity\cHandlers; ValueType: dword; ValueName: bVerify; ValueData: $00000001

Hello natorious325,
I'm sorry that you ran into trouble with this. The Creative Cloud desktop application is the program that you use to install your Creative Cloud programs (such as InDesign) and manage your files and font selections. It looks like this:
If there are problems with font sync, there will be an error listed in the Assets > Fonts tab of the Creative Cloud desktop application.
Please check these troubleshooting steps for desktop sync, which cover most of the common problems:
TYPEKIT | Troubleshooting Guide: syncing desktop f...
If those steps don't get font sync working for you, you can email Typekit Support directly at [email protected] for further help. Best,
-- liz

Non-domain computers not reporting

I have a few machines that are not joined to the domain, but use our domain joined WSUS server. Never had a problem before, but this problem seems to have started when I did the migration to 2012 R2. I used the TechNet migration procedures that
I later found can be somewhat problematic. I just discovered that the computers not joined to the domain are having issues. I'm still trying to confirm whether they're actually getting updates, but the certainly aren't reporting.
I have confirmed the clients cannot contact http://myserver/selfupdate/wuident.cab. I've looked at permissions in IIS, but the only article I've found is for WSUS 3.2 (https://technet.microsoft.com/en-us/library/dd939903(v=ws.10).aspx). It talks
about anonymous access being enabled for reportingwebservice and I verified it is. I've also found people reference a ReportingWebService virtual directory in IIS, but I only see it as an application and not a virtual directory so I'm guessing they changed
the way that works since all my domain joined machines work just fine. Can anyone provide a 2012 R2 reference to setting permissions correctly so I can confirm that?
I'm getting these errors in WindowsUpdate.log:
WU client failed Searching for update with error 0x80244019
WARNING: GetAuthorizationCookie failure, error = 0x80244019, soap client error = 10, soap error code = 0, HTTP status code = 404
WARNING: Failed to initialize Simple Targeting Cookie: 0x80244019
WARNING: PopulateAuthCookies failed: 0x80244019
WARNING: RefreshCookie failed: 0x80244019
WARNING: RefreshPTState failed: 0x80244019
WARNING: PTError: 0x80244019
WARNING: Reporter failed to upload events with hr = 80244019.
WARNING: Cached cookie has expired or new PID is available

I have confirmed the clients cannot contact http://myserver/selfupdate/wuident.cab.
It looks like you have not included the port number, 8530 is used by default with 2012R2. Try http://myserver:8530/selfupdate/wuident.cab.
If you find the answer of assistance please "Vote as Helpful"and/or "Mark as Answer" where applicable. This helps others to find solutions for there issues, and recognises contributions made to the community :)

Urgent fix reqd in Portal Reports

All,
Portal Reports currently has a limit of 10001
rows. This causes a problem in DSS applications. From my WebDB days, this was a global variable with a value of 10000. Can this limit be removed or can you make this parameter a variable, so the developer can set the upper limit ?
Also, Portal ignores text entered in the after-header,before footer textareas after the text keyed in exceeds a certain limit. This is similar to the form reverting to select * from emp, if the package was invalid.
Can we please fix this ? If not the second, at least the first ?
Last, but not the least (and I may be pushing myluck here)..what are chances of renaming the show procedure in wwv_sylk to xls ? This will cause a report that is run with formatout=EXCEL to appear as http://<server>/pls/<dad>/<schema>.<pkg>.xls.
Browsers will recognize this as a spreadsheet . Currently, it prompts for how do I open as *.show document.
Thanks
Sanjay

I have found a temporary workaround, by editing the where clause in the stored procedure manually. However this fix have to be done every time a change have been committed in the wizard, so it is still not a solution to go for indefinitely, but its ok for now.

HOW TO FIX COLUMN IN BEX REPORT

Hello Gurus,
I have created BEX report in which user want 1st two column (Material and its describtion) to be fixed as if he want to check all relavent result related to Material the first 2 column should not be move it should be fixed and rest other results and other column should move,

Hi Wajid,
The VBA code i gave earlier will do this automatically for your users. Please use it. It freezest columns A and B so that columns A and B dont move even if your users scroll to the right. It just stays there.
In your workbook after you have inserted your query, go to Tools->Macro->Visual Basic Editor. Then go to Insert Menu->Module. Double click the module that have been created (probable name is Module1) and then on the code editor paste this code:
Public Sub SAPBEXonRefresh(queryID As String, resultArea As Range)
Range("C1").Select
ActiveWindow.FreezePanes = True
End Sub
Everytime the users refresh your query it will freeze the first to columns. So at least you are sure that the columns A and B are frozen.

Non Domain computers accessing Report Manager.

I'm using SQL 2012 and am having a hard time finding documentation on how to turn off authentication for the Report Manager. All i want to do is having some computers that are not on our domain be able to pull up a report without getting prompted with
login info.
SSRS is not installed with sharepoint mode.
I found this: http://msdn.microsoft.com/en-us/library/cc281383.aspx but had little luck getting it to work.

Hello,
SSRS uses by Default Windows authentication, but you can change it to anonymous access:
Configure Basic Authentication on the Report Server
Olaf Helper
[ Blog] [ Xing] [ MVP]

Display problem when reading Traditional Chinese in Crystal Report 2008

Hi All,
I have tried to connect MS SQL 6.5 to build up a report. However, I encounter a problem when read Traditional Chinese. all chinese characters turn into adnormal characters. I wonder it is problem of SQL Server or some setting that I may not know. In addition, I can able to read chinese in the application program , ISQL / Query Analyzer. Please help to give idea and suggestion to fix this. Thanks
SQL Server: MS SQL Server 6.5
Client OS: Window XP ( Traditional Chinese Version)
Server OS: Window NT and Window Server 2000
Stsyou

Hi
If you are using a Chinese language build database, Crystal Reports English build might not display the characters properly as non english databases include one byte characters as ASCII code character and double-byte characters as their own language code character.
Traditional Chinese, Simplified Chinese, Japanese (Kanji, Hiranga, and Katakana), Korean and Vietnamese use double-byte characters.
However, a possible workaround to this issue is to verify that the encoding on the database client is configured according to the examples below. Also, you will need to install the language pack in the English environment.
CONFIGURATION EXAMPLES:
Shift-JIS for a Japanese database
Big5 for a Traditional Chinese database
GB2312 for a Simplified Chinese database
iso-2022-kr for a Korean database
Windows 1258 for a Vietnamese database
EXAMPLE SCENARIO:
An Oracle database saves non-English language data such as Japanese.
The Windows operating system is English.
STEP TO CONFIGURE THE CHARACTER CODE IN THE ENVIRONMENT SETTING
(This step is based on the details of the EXAMPLE SCENARIO.)
1. Configure the system environment on the database client side to 'Shift-JIS' as the character code set in the Environment Setting.
This results in the NLS_LANG variable set to Japanese_Japan.JA16SJIS under the registry HKEY_Local_Machine\Software\Oracle\Homeo.
STEPS TO INSTALL LANGUAGE PACK IN AN ENGLISH ENVIRONMENT
(These steps are based on the details of the EXAMPLE SCENARIO.)
1. Add languages to the computer system by clicking:
Control Panel > Regional Options > General
2. Select the check box for 'Traditional Chinese', 'Simplified Chinese', 'Japanese', 'Korean' or 'Vietnamese'.
3. Click 'Apply'.
4. When you are prompted, insert the Windows CD-ROM to install the language pack.
5. Restart the computer.
Upon completing these steps, you are able to display the languages characters in the Crystal Reports Designer in a Windows English environment.
==========
NOTE:
If the database table and field names use non-English language characters, Data Explorer in CR will not correctly display these names. However, when you preview the report, the non-English data displays correctly.
==========
Configuring the database client according to the examples and installing the language pack will display the characters successfully. However, there are cases when this workaround does not resolve the issue.
For further information about CR and double-byte languages, refer to knowledge base articles, c2008083 and c2008349.
Hope this helps!!!
Regards
Sourashree

Read fixed domain vales in reports

Similar Messages

Maybe you are looking for