Read only access in MIIS

Experts,
How to provide read only access in MIIS?
Thanks,
Manohar

Do you mean what MIIS security group needs to be added? If yes, then MIISBrowse sounds the one. You can find more from Technet:
MIISAdmins - Members of this group have full access to Identity Manager.
MIISBrowse - Members of this group are granted permission to gather user information through the use of Windows Management Instrumentation (WMI) queries.
MIISJoiners - Members of this group can perform metaverse search operations in Identity Manager and can perform join and disconnect operations.
MIISOperators - Members of this group can run management agents, view synchronization statistics and save run histories.
MIISPasswordSet - Members of this group can perform all operations using the password management interface with WMI. This group also inherits the permissions of
MIISBrowse.
MIIS 2003 Security Considerations

Similar Messages

  • Read Only Access to Storage Container

    Is it possible to give Read Only access to a particular storage container without adding someone to Subscription and providing them the access key without anonymous request without going through SAS route

    By default, a container and any blobs within it may be accessed only by the owner of the storage account. If you want to give anonymous users read permissions to a container and its blobs, you can set the container permissions to allow public access. Anonymous
    users can read blobs within a publicly accessible container without authenticating the request.
    This link gives full details
    https://msdn.microsoft.com/en-us/library/azure/dd179354.aspx
    Frank

  • Read Only access to UCCX server

      Hi,
    I would like to know if it was possible to create an account for Read Only access for server in UCCX 8.02.
    Saima

    Saima,
    Unfortunately no it is not, you have either Admin access or supervisor access. The admin access has full access and supervisor access allows configuration of the RM subsystem either foe own team or all teams.
    HTH,
    Chris

  • Read-Only Access to Specific SAP tables

    Is it possible to grant a user read-only access to a specific table or tables?
    For example, say I wanted to give someone SE16N capability for just EKKO/EKPO/EKBE and NO OTHER tables.  Is this possible?  How?
    Thanks.

    Hi,
    as it was mentioned the transaction SE16N checks for authorization object S_TABU_DIS. The problem in your case is that the tables EKKO, EKPO and EKBE are already assigned to the authorization group MA - MM Appl. table. But there are many more tables assigned to this group. Changing assignment of standard tables is not a good idea.
    Cheers

  • Read Only access to tablespace

    Hi,
    Oracle 10.2.0.4
    How can I grant read only access to a tablespace for a user.
    Thanks

    It is no ussual.... a tablespace is a box where one or more user store his data... sure you do not want to say user and not tablespace?
    Grant select to the objects of this tablespace...DBA_TABLES or ALL_TABLES...
    Select 'GRANT SELECT ON ' || OWNER || '.' || TABLE_NAME || ' TO <USERNAME> ' FROM DBA_TABLES WHERE TABLESPACE_NAME = <TABLESPACE>

  • Read only access to J2EE related tools

    Hello,
    I would like to help our auditors access everything they need to check in the Java systems, but I am not ready to give them ADMIN accounts. That`s why I need some kind of read only access for them.
    So I would like to ask you if there is a SAP Note about the read only access roles for J2EE/ Java AS?
    I am afraid there is no such note available, so can anybody share any experience with granting read only access to the Java system? I know how to grant access to the whole NWA, but what about the rest?
    Examples:
    - is there a way how to grant read only access only to the UME?
    - is there a role for read only access to the portal PCD?
    - is there something similar for KM access?
    Or has anybody ever tried to split the admin roles into smaller pieces? Is there a description/ document how to do such thing?
    Thank you for your time and effort,
    cheers Otto

    Hi,
    thanks for trying, but I can use help.sap.com and was on that page before.
    Maybe if there were any examples there or better: if the whole thing would be more granular (I see no point in using roles starting with SUPER, containing ADMIN or ending with ALL). I am looking for roles for surgery or for auditing. I don`t want to give anybody these super/admin/all roles just like that.
    If you can suggest how to use that page, that would be cool. Otherwise I see no use.
    By the way: another question of mine about surgery: How to restrict access to download/ upload UME configuration file
    I would like to know how to controla access to this specific feature, nothing else.
    Thanks for the time and effort,
    cheers Otto

  • View read allows read only access

    Hi friends,
        I have created maintainance view, I am getting this warning " View read allows read only access , Maintainance not possible". So to avoid this, what should i do now.
    Thank you

    Hi,
    In Delivery and maintence check if the field Data Browser/Table View Maint. has the value delivery and maint allowed
    or delivery and maint allowed with restrictions.
    Regards,
    Rajesh Kumar

  • Read-only access when saving metadata to file from Adobe Lightroom on a MAC OS to Windows shared drive

    We have a group of 5 people editing and indexing photos to a shared drive on a windows server, everyone has its own catalog and working on different folders to avoid any locking conflicts.
    The windows computers don't have any problems but the Mac's don't write the updated metadata to all files because they get the message "Photos have read-only access".
    The environment is the following:
    2x Macs workstations running:
    - Adobe Photoshop Lightroom 5.7.1
    - iMAC with MAC OS X Yosemite 10.10.2
    3x Windows Workstations:
    - Windows 7
    - Adobe Photoshop Lightroom 5.7.1
    Server:
    - Shared drive on a Windows Server 2012 Standard
    I have searched the internet, no one has this problem with this exact setup but I have tried all the solutions I found, namely:
    1. Connect to the network drive with cifs:// protocol
    2. Change the settings of the nsmb.conf for 'smb1_only' protocol
    3. Mount the drive manually by command line
    Nothing worked, any ideas?

    Did you ever find a solution to this problem?  I have the same issue and wonder if Lightroom 6 will resolve it.  I  tried AFP, SMB2, SMB3 and they all failed to save metadata randomly. When I use NFS from OS X then it works fine but it's a little slower than SMB and it's not as native as the mount via AFP or SMB, so it's harder to maintain.     My server is a FreeNAS 9.2 (FreeBSD) which is running Samba, Netatalk and native NFS.

  • How to configure Mailbox Read-Only access for Mailbox's owner on Exchange Server 2010?

    I have to configure the Exchange Server 2010's mailbox to only grant Read-Only Access on the mailbox's owners.  So they can only allowed to read their messages and cannot modify or remove them.  Are there any references or methods to do?

    Hi,alexchy8
    We can make use of 2 PowerShell commands to achieve this goal.
    Add-MailboxPermission and Add-MailboxFolderPermission.
    Execute the Add-MailboxPermission command to delegate the read permission at mailbox level.
    Execute the Add-MailboxFolderPermission command to delegate the required permissions on specific folders inside the mailbox.
    You can read the following article as reference:
    http://www.exchangedictionary.com/articles/assign-read-only-mailbox-permission-on-exchange-2010-2013-powershell
    Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety,
    or suitability of any software or information found there. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
    Best Regards.

  • XCM(Extended Configuration Management) Read Only Access for Webshop

    Hi,
    We dont hav e XCM admin access in our project.We need to have just the view(read only) access.This will help us immensly during any troubleshooting. Plus we will save a lot of time while troubleshooting if the view access is avaialable to us. In case of any issues in the XCM setting, we can easily pin point the issue and ask the ERP team to change it. In absence of it we can only speculate what could have gone wrong on the XCM side. Is there any role in XCM so that we can get just read only access.
    Regards

    Hi,
    The below note will help you.
    Note 1014383 - Read only user in the XCM and Administration area of ISA
    Regards,
    Shanto Aloor

  • How enable read only access for ACS server itself

    Hi,
    We would like to know whether its possible to create a read only access to the ACS server. Currenlty ACS server has a generic login with full admin rights.
    We need to create a login to couple of users to log into ACS to check the "Report and Activity" tab. Access to all other tabs should be disabled.
    We are using ACS4.0 verison. Please let me know whether its possible.
    Thanks
    Nachi

    Hi,alexchy8
    We can make use of 2 PowerShell commands to achieve this goal.
    Add-MailboxPermission and Add-MailboxFolderPermission.
    Execute the Add-MailboxPermission command to delegate the read permission at mailbox level.
    Execute the Add-MailboxFolderPermission command to delegate the required permissions on specific folders inside the mailbox.
    You can read the following article as reference:
    http://www.exchangedictionary.com/articles/assign-read-only-mailbox-permission-on-exchange-2010-2013-powershell
    Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety,
    or suitability of any software or information found there. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
    Best Regards.

  • How to create a user with read only access for ESB / BPEL Console

    I need to create a user with read only access to ESB Console & BPEL Console. I have created a user
    (esbreadonly) and assigned ascontrol_monitor role but user is still able to
    delete services from ESB systems (such as DefaultSystem). Is there any way to
    create a user that has strickly read only access to ESB Console & BPEL
    Console
    Thanks
    Dinesh Patel

    Check out this post.. I'm in the process of testing.
    http://chintanblog.blogspot.com/2007/12/i-saw-numerous-people-asking-about-bpel_290.html

  • How to create a read only access for database

    I am developer but willing to lear some of the dba tasks. I would like to know the steps that i need to take to creat a read only access database that is going to be used for the report development.
    I really appreciate if you tell me all the steps I need to create that. I have a full right to do this in the develpment database. thanks

    thank you for your reply but it does not tell me how i can set up a read only access acccount for the user. Do i need to create a role and assign the role to the users?

  • Read-only access (hide a portion of the config)

    Is there a way to alloww read-only access to only a portion of the config.  I have customers who are requesting read-only access, but i don't want them seeing portions of the config. 
    Any help or suggestions would be greatly appreciated.  Thanks

    If they have an enable level login they will be able to see the whole configuration (absent encrypted passwords assuming you're using service password-encryption).
    You can make logins more granular and prevent customers from having, say, the ability to execute arbitrary commands such as "show run". You could, for instance setup a given user to only be alllowed to execute "show interface status" etc. NX-OS has this ability pretty much 'baked-in'. For IOS-based systems, a bit more work is required.
    Here is a guide for how to do it if you use TACACS for AAA:
    https://supportforums.cisco.com/docs/DOC-15765
    If you're using local authentication, you can do similar things using either privilege levels or cli views:
    http://www.cisco.com/en/US/docs/ios/12_2t/12_2t13/feature/guide/ftprienh.html
    http://www.cisco.com/en/US/docs/ios/12_3t/12_3t7/feature/guide/gtclivws.html
    http://www.networkworld.com/community/node/57553
    Hope this helps.

  • Read only access of a full schema ?

    Hi all,
    Can i create a role having read only access of a full schema ?
    Thanks in advance.

    Can i create a role having read only access of a
    full schema ?The point here is that there is not a single command to perform this task, so you will have to do it on a per object basis. If you want to give access to the complete schema then it is advisable to create a script to grant on each table and on each view from the source schema. By providing read only to the full schema, I understand you are referring not also to the tables but also to the views, sequences, and may be stored program units, so you will have to properly define the scope of this 'full schema'.
    Once you have properly defined the scope and have granted, as suggested by means of a role, then you may want to create synonyms for each granted object, so you don't have to qualify it with the schema name prefix when the object is being accessed.
    ~ Madrid

Maybe you are looking for

  • SSO for application systems with local users?

    Hi all,  I'm new to Oracle Identity Management.  My company is going to implement SSO for inhouse applications.  However, some applications have their own local users (e.g. admin, guest, etc.) who have to login to the application system through the s

  • Problem running ddr3 dual channel mode on MSI X48C Platinum

    I am having a problem with running my ram in dual channel mode, in single channel mode it works with out a problem, i switch the ram slots for dual and it does not boot Can any one give me an answer to why it wont work? Also having problems with my Q

  • Droplet won't work

    I've created this droplet before but had a hard drive crash and tried to re-make it but this time it doesn't work. Machine Windows Vista Ultimate 64.  Action: Save, Close I've tried to do Action: Save As, Close. but that doesn't work neither. I get e

  • Removing an account but not old messages

    I have left my old ISP and my email account with them is terminated. I would like to remove my old account from my email account list so that mail doesn't try to connect every 5 minutes but I don't want to delete all my old messages from that account

  • Apple Mac with IE 5.2 problem

    Hi All, I have built a Flash movie at this location: click here for website The site shows up fine under PC(IE, NN and FF), Mac Safari. But when i type it into Mac IE, it just won't even load the page. Any ideas? I'm at my wits end. Thanks in advance