Read Only and HTML Table Cell Attributes

Hi Guys,
I believe i have come accross a bug - i'm been working on a form that can be filled out and printed - when going into print for sake of the output looking nice i set the form element to read-only.
As soon as an element such as a drop down box, text feild, text area, etc which display as "[selected value]" in plain text in read only mode, are changed to the read only mode apex seem to ignore the html table cell attributes.
For example i have a id number in the top left and then a version number in the top right. Both use a text feild; the top left uses 'width="100%"' for it's HTML Table Cell Attribute to push the right cell to the right. and the right cell has 'align="right"'. Now this works fine when read only is off... but as soon as read only is on, both the width and the alignment are totally ignored, and i can't find any sign of them in the code.
Because this is for printing; using the "disable" on the form element instead of "read only" function, isn't appropriate as disabled will make the elements faded and hard to read when printed, and keeping the elements as is will allow the user to edit information on the print screen - which is not appropriate.
Is this a bug? Will it be fixed soon? Is there any work around?
Cheers,
Alex

Use the "Read Only Element Table Cell(s) Attributes" in the Read Only region of the Item edit form.
Scott

Similar Messages

Display read only field in table / form from another vo

i came across couple of scenarios where i had to bring a field in a table / from from other vo than on which most fields in table / form were based. in all cases i had to display the field from another vo as read only and there was only one record in other vo which was related to previous vo in table / form. for this i created a view accessor and created a soc with model driven lov. the problem with this is that first element alwasy shows blank in soc. how can i display the filled soc with first element populated and read only in this scenario. i tried alternatively with groovy expressions but other people in team said it is not good practice to use groovy expressions to fill fields in one VO from other VO. how can i acheive this requirement with soc component / lov / view accessors. is there any other alternative as well. jdev 11 1 1 5

1) in the attribute of the VO select the 'List of values' node and edit the list attribute you see there; in the dialog select the UI Hints tad and make sure the checkmark for the 'Include "no Selection Item' is off.
2) you can base a VO on to EO which are then joined via one or more attributes (association)
Timo

How can I copy and paste table cells from Pages into InDesign with minimum reformating?

How can I copy and paste table cells from Pages into InDesign with minimum reformating?

Do you mean you want to retain the formatting from Pages, or retain formatting already applied in ID?

I go to File get info sharing and it says I have custom info, me read and write, staff read only and everyone read only and I don't know how to change the setti

I am attempting to download an update for Firefox - when attempting to open it tells me to go to File/getinfo and when I look at sharing and Permissions there are three entries, me, staff and everyone - me is Read/write, the others are read only and there is a note that says I have suxtom access but still cannot drag to applications -
how do I unlock this process

Hello mbennjr, if you have problem with update or permissions firefox the better way is to '''download and install the new version'''.
1. Download a copy of the latest firefox from http://www.mozilla.org/en-US/firefox/all.html
2. '''Trash''' the current Firefox application to do a clean install.
3. Install the version that you have downloaded.
Do not select to remove your personal data, your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox#Mac Firefox Profile Folder], so you won't lose your bookmarks or other personal data.
see also: [https://support.mozilla.org/en-US/kb/install-firefox-mac?redirectlocale=en-US&redirectslug=Installing+Firefox+on+Mac#os=mac&browser=fx24 Installing Firefox on Mac]
thank you

Ipad form ....help needed please. Clear form after email as read only and sequential numbering

Hi
i am a complete novice at this however this is what I want to achieve.
i Have a paper duplicate report sheet that I want to get electronically, I want to be able to add sequential numbers to each report and be able to email the report to the client from a email field in the form
so far I have so I have created the pdf form, I have a button that runs a JavaScript that will hide the submit button and then send to the clients email and to bcc myself so I have a copy of the report also. This has been tested and works
i Am struggling with sequential numbering and once the form has been emailed it's un-ditable as the JavaScript has converted it to read only for emailing which is good as it can't be edited. But Is there a way on my submit button to email the report as read only and then clear all form fields in the report ready for filling with the next sequential number?
I Have had a good look sound for a resolution to this but am struggling
many thanks in advance for any feedback
paul

Hi Paul,
I presume that you are using the desktop version of Acrobat Pro to author the form.
I will move this discussion to the PDF Forms forum so that the experts in the forum can answer your question.
Please note that the Reader/Acrobat DC mobile apps (for iOS, Android, Windows Phone, etc.) have limited JavaScript support.
JavaScript for Reader Mobile API Reference (iOS)
You may be able to make the form work as you want in the desktop version of Adobe Reader/Acrobat Reader DC. However, some functionality (e.g adding a sequence number to each PDF) will not work in the mobile apps due to the limited JavaScript support. Sorry for the inconvenience.

When I converted a file from PDF to WORD.DOC it opened as Read Only and I'm unable to alter any of the text. How can I solve this problem?

When I tried to convert a file from PDF to WORD.DOC it opened as Read Only and I'm unable to alter any of the text. How do I solve this problem? I don't know how to change it from Read Only.

Dear Sara
Thank you very much for sending the converted file. Yes, I am able to edit it - that will be very useful to me and I appreciate your help.
Referring to your previous message when you said you'd converted via Acrobat and not Acrobat.com, I'm converting via Acrobat.com because that's the only option that is shown (how do I convert via Acrobat? - perhaps that would be more successful). I'm using the Export PDF website, and the OCR is enabled to "Recognize text in English UK". However, I've just tried converting a different LPA pdf form, this time for Health & Welfare https://www.gov.uk/government/uploads/system/uploads/attachment_data/file/245571/LPA114_He alth_welfare_LPA.pdf and again I have the same problem as before. I've altered it from "Read only" and thought I'd then be able to enter text, but "Drawing Tools" is shown in the pane and I'm unable to enter anything onto the form - everything appears to be in images. Also, the lettering on the heading of' page 1 has become jumbled, with the word "Public" overlaying the word "Guardian." Any suggestions as to what it is I'm doing wrong would be welcome - I don't like to be beaten!
Regards,
Judith.

I purchased a IMac in Feb later I added a Seagate ext. hard drive. On April 29 I received an errors that the ext. Drive may be a read only and not backing up files. I'm unable to check disk permission or correct errors. Help would be appreciated.

I purchased a IMac in Feb later I added a Seagate ext. hard drive. On April 29 I received an errors that the ext. Drive may be a read only and not backing up files. I'm unable to check disk permission or correct errors. Help would be appreciated.

Click on the hard drive on the desktop, then File > Get Info. What does it say about permissions? If this is just a data drive you may want to consider "ignore ownership on this volume".
Otherwise I can only say I have not been reading good things about Seagate drives recently. I have some of their rock-solid ones from about 10 years ago (still running well), but now...?

[SOLVED] How to make file read only and stay?

I'm using gnome 3 and want to make the recently used.xbel file (in .local/share) read-only/locked. I've tried making it read only and it just reverts to normal when something tries to write to it. How do I do this?
Last edited by sudokill (2011-04-29 19:41:51)

Worked great, thanks. No more recent documents at all

Read-only AND Encrypted

I am using Acrobat XI Pro: is there a way to make a file read-only AND encrypted?

Folks,
I may have found a way to create a pdf document with Acrobat XI Pro that is read-only AND encrypted. Please let me know if I have indeed succeeded or not, thank you!
The steps that I follow to create the read-only AND encrypted pdf document are as follows:
Create a plain pdf document, from MS Word for example
Sanitize Document
Create Form without fields
Close Form Editing
Encrypt with Password
Save
Save As Other… => Reader Extended PDF... => Enable More Tools (includes form fill-in & save)…
I as a not-very-sophisticated-computer-user did not find a way to hack difficult to detect changes - such as the insertion or deletion of the word 'not' - into the resulting pdf document. But again, please let me know if you DO find a way to hack the resulting pdf document, thank you!
P.S. I think the resulting pdf document is essentially an encrypted form, albeit one without fields.

[SOLVED]External HD: Auto-mount in read-only and only root can access

So I followed the advice in http://bbs.archlinux.org/viewtopic.php? … 88#p583088 regarding using udev to auto-mount my external 60gb harddrive, and it works. The only problem is, it is being mounted read-only and I can only view the contents via sudo or as the superuser.
Can anyone guide me in the right direction I need to go to get this changed? I have already once tried to recursively chown everything on the harddrive, but that didn't seem to work. The syntax I used from that above article specifies "rw" as one of the options for the mount command, so I am stumped as to why this happened.
Thanks
Last edited by trann (2009-11-13 16:24:36)

Wattanut wrote:
Have you installed ntfs-3g?
I think I've had that problem before.
WoW, perfect solution. This is why I love this distro.

Search record combine with read only and read/write record

can the search record display read only and read write only record together ?

Maybe your Mac-B user account has the same (short) user name
as your Mac-A user account. Matching user names or short user names
could make the Mac-B account able to Read & Write to your shared folder.
Because I think you can log in with short user names to a server
as well. I guess passwords should be matching as well,
and perhaps the user ID's (System Preferences -> Accounts
-> right-click on user) also?
Cheers,
Vincent Verheyen.

Internal parameter - The report parameter is read-only and cannot be modified.

Hello,
We have an SSRS report that has an Internal parameter for the user that is logged in (gets the Report.User!UserID in custom code and assigns to parameter called Login). We would like it to remain internal as it is for security purposes - we filter
data depending on whether or not the user has access. We would not like it to be accessible from the URL. The report has drill-through functionality where the user can click a link and the report is filtered on certain criteria. This seems
to work fine in SSRS 2005, but since i have upgraded the report to SSRS 2012, I am getting the error on the drill-through:
The report parameter 'Login' is read-only and cannot be modified. (rsReadOnlyReportParameter)
The properties in Report Manager have the "Hide" option selected. Any help would be appreciated. Thanks.

Hi Hhewson,
In Reporting Services, if you create a hidden parameter, you can set values for it on a report URL or in a subscription definition. If you set a parameter to Internal, it is not exposed in any way except in the report definition. An internal parameter must
have a default value, which can be null if the Allow null value option has been selected. Internal Parameters are not configurable by the end-user at run-time.
In your scenario, I suggest you changing internal parameter to hidden parameter to check whether the issue persists.
Reference:
In SSRS, how does an “Internal” parameter differ from a “hidden” parameter?
Hope this helps.
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support

The report parameter 'param1' is read-only and cannot be modified. (rsReadOnlyReportParameter)

hey guys..
I'm trying to get the report that I need to be filtered by a parameter value (named Param1)
I created a parameter in the data tab and tried to pass a value from my Web application to the report services.. now my report have that textbox that prompts me to enter the filtering value for the report I want.. everything works fine till this point..
now I have another webpage that has a report viewer and a textbox for the user input the value they want.. and pass it to the report.. and I'm using the following code to pass the value to the report I made earlier..
Dim par(0) As Microsoft.Reporting.WebForms.ReportParameter
par(0) = New Microsoft.Reporting.WebForms.ReportParameter("paramSiteCode", TextBox1.Text.ToString)
ReportViewer1.ServerReport.SetParameters(par)
ReportViewer1.ServerReport.Refresh()
however.. now I'm getting an error.. "The report parameter 'paramSiteCode' is read-only and cannot be modified. (rsReadOnlyReportParameter)"
what am I missing here? I've been thru the help and forums.. and the code should work.. or so I hope it would.. thanks in advance..

Details
Product:
sql server reporting services
ID:
rsreadonlyreportparameter
Source:
microsoft.reportingservices.diagnostics.utilities.errorstrings.resources.strings
Version:
8.00
Message:
The report parameter '{0}' is read-only and cannot be modified.
Explanation
This error occurs when you attempt to set a value for a parameter that is read-only. A parameter is read-only when the
Prompt property for the parameter is set to false.
User Action
To set a value for a parameter, the Prompt property for the parameter must be set to
true. You can set this property in two ways:
Before publishing the report, provide a prompt string for the parameter. In Report Designer, you can provide a prompt by typing a prompt string in the
Prompt text box in the Report Parameters dialog box.
After publishing the report, set the Prompt User property for the parameter. In Report Manager, in report properties, click the
Parameters tab, and then select Prompt User for the parameter.
For more information about report parameters in Report Designer and Report Manager, see Books Online.
In the release version of SQL Server 2000 Reporting Services, when Prompt is
true and Prompt String is blank, the parameter is still available to the user in the report viewer. In SP1, when
Prompt is true and Prompt String is blank, the parameter is hidden from the user.
Note: Publishing a report over an existing report on the report server does not overwrite the parameter information. To update parameters for an existing report, either delete the report on the report server and republish, or update the parameter information
for the report in Report Manager.
I struggled with the same problem in VS 2010.
After a long series of hoops to jump through, I modified the rdlc file by hand and added <Prompt>true</prompt>. This parameter cannot be set through the GUI - go figure.
In my case, I was attempting to generate a sub report, and pass a parameter to the sub report.
To get this to work, the sub report needed these two sections.
<ReportParameters>
<ReportParameter Name="Network_Id">
<DataType>String</DataType>
<Prompt>true</Prompt>
</ReportParameter>
</ReportParameters>
<Variables>
<Variable Name="Network_ID">
<Value />
</Variable>
</Variables>
I was then able to use the name "Network_Id" in the sub-report properties of the "sub report control" for the name of a parameter on the parameters tab. I then set it to the key value that I need in the subreport properties dialog.
Prior to setting prompt to true, I kept getting the read-only exception.
I'm not sure if I am being clear about this, but sub reports do work, and prompt can be manually added to the report definition file.

USB FAT32 is read only and will not format

My usb is formated as FAT32. however it is read only, and will not format. here are some screen shots:
http://gyazo.com/369a6b843d86ba0bcbd360ed89ea258c
http://gyazo.com/f07905c5b27519cbefbab29719c88702
http://gyazo.com/40d291c83b85e88c68ccc47a45b19f35
http://gyazo.com/490462fb7b280be7483048b2e485b2b8
not really sure what is wrong with it, any one have any suggestions?
i mean it cant be trash now, there has to be some program that will fix it.

Drive Partition and Format
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Apply button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.

Tables in SQL DEVELOPER DATA MODELER seem to be read only and have a chain symbol in the upper left

I have a bunch of tables in my data model. I have three relational models defined in this file. In one of the models, all the tables seem to be read only. They all have a chain in the upper left hand corner of their box.
I am not using version control, so that are not checked in or anything like that.
How do I unlock these objects? Why to they appear to be locked?
Thanks

It looks like you've linked tables across multiple models or designs.
Does this look about right?

Read Only and HTML Table Cell Attributes

Similar Messages

Maybe you are looking for