Read only field in selection screen
hi friends,
I am using selection screen for getting input.one field must be hardcoded & should not be changed but the user wanted that field also to be displayed in screen as read only. Is it Possible? If possible, how it is possible? please help me
Thanks & Regards
Nigesh
hi nigesh,
<b>the solution to your problem is here below ,just check the code .</b>
here u can see that the value of a parameter is hardcoded and made as an output field .
selection-screen begin of block 1 .
parameters : p_bstyp type c modif id abc.
selection-screen end of block 1.
*******************INITAILIZATION .****************************
initialization.
p_bstyp = 'F'.
**************VALIDATIONS 'AT SELECTION SCREEN ' .*************
*at selection screen output for document category field to be fixed to 'f'.
at selection-screen output.
loop at screen.
if screen-group1 = 'ABC'.
screen-input = 0.
modify screen.
endif.
endloop.
revert back if u haveany queries.
PLEASE REWARD POINTS IF USEFUL.
Similar Messages
-
Read only fields in selection screen
Hi,
I have a parameter in a selection screen and wanted it be read only, mean only values could be displayed but it should not allow the user to either enter or modify existing values. Can any one please suggest how to do this ?
Thanks and best regards,
Kulwant SinghHi,
Using Modif Id You can do it. The Syntax is,
PARAMETERS <p> ...... MODIF ID <key> ......
See the Sample code,
PARAMETERS: TEST1(10) MODIF ID SC1,
TEST2(10) MODIF ID SC2,
TEST3(10) MODIF ID SC1,
TEST4(10) MODIF ID SC2.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF SCREEN-GROUP1 = 'SC1'.
SCREEN-INTENSIFIED = '1'.
MODIFY SCREEN.
CONTINUE.
ENDIF.
IF SCREEN-GROUP1 = 'SC2'.
SCREEN-INTENSIFIED = '0'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
Thanks. -
Setting only the TO field on the Created on Field in Selection screen to Current date
Hello,
We have a requirement to Set only the To date in the Created on Field in Selection screen to the Current date, I have tried through Dynamic variable option to set the Date calculation but I am able to see Options to set the Current date to From or From and To Created on Date fields instead of setting the Current date only to To created on Field.
We are in 4.7 and are not supported with user defined variables, Appreciate your inputs on this.
Thanks and Regards
Mohammed Roshan>
sunitha j wrote:
> Hi ,
>
> It would br gr8..if u could give some more info about the usage of this class..i mean if i hav to implement it in my program....wat is the necessary data that needs to b copied...
>
> Thanx,
> Sunitha
what Text field you want to change.
Since you are working with Dynpros , you have to split the screen in two parts, and one for the Showing differenet fonts and other your normal Dynpro information.
you need to use the Method ADD_TEXT Did you check the program DD_STYLE_TABLE. -
Can no longer select text in email template or read only field with mouse using IE or Firefox?
Hi Guys,
I can no longer select text in email template or read only field using my mouse in IE or Firefox anymore. We are using CRM 2011 rollup 18 applied with IE 11 and the latest version of Firefox. We only applied roll up 18 in Feb when this issue began.
Thanks
Dave
David KellyWhen you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
(1) Bypass Firefox's Cache
Use Ctrl+Shift+r to reload the page fresh from the server.
(You also can clear Firefox's cache completely using:
orange Firefox button ''or'' Tools menu > Options > Advanced
On the Network mini-tab > Cached Web Content : "Clear Now")
(2) Remove the site's cookies (save any pending work first) using either of these. While viewing a page on the site:
* right-click and choose View Page Info > Security > "View Cookies"
* Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
Then try reloading the page. Does that help?
These features rely on JavaScript, and it sounds as though you have scripting enabled if you get (the wrong) color changes. Some add-ons might alter the way scripts operate, so a standard diagnostic to bypass interference by extensions (and some custom settings) is to try Firefox's Safe Mode.
First, I recommend backing up your Firefox settings in case something goes wrong. See [[Backing up your information]]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
Next, restart Firefox in Firefox's Safe Mode ([[Safe Mode]]) using
Help > Restart with Add-ons Disabled
In the dialog, click "Start in Safe Mode."
If those features work correctly, this points to one of your extensions or custom settings as the problem.
To also disable plugins, you can use this page:
orange Firefox button ''or'' classic Tools menu > Add-ons > Plugins category
Any change? -
Validate a field on selection screen based on value entered on anothr field
HI,
There is a program with some fields in selection screen in EWM. The first field is Warehouse. I need to add another field 'Entity to Dispose' in such that what ever value I enter in Warehouse field, its corresponding values should only be displayed as F4 help for 'Entity to Dispose' field.
For eg: If I select the warehouse as 0799(lets say), then the F4 help for Entity to Dispose field should display only the values which are related to warehouse 0799 (and any other values pertaining to other warehouse should not appear).
Could anyone suggest, how this can be achieved?
Thanks in advance.
Regards,
PavanHi,
You can use FM
DYNP_VALUES_READ
DYNP_VALUES_UPDATE
to read the another field value and Using that field build your internal table for f4 values.
and use FM F4IF_INT_TABLE_VALUE_REQUEST for F4 values..
do this on AT SELECTION-SCREEN ON VALUE REQUEST FOR <YOUR_F4_FIELDNAME>. -
Hi friends,
I have to make one field in the selection screen(report) as a read only field. Can you suggest how to do it.
regards,
JohnHi,
You can refer to the following code:
AT SELECTION-SCREEN OUTPUT.
loop at screen.
if screen-name eq 'PNPS$MSL'.
screen-active = 0.
endif.
modify screen.
endloop.
Hope this helps.
Reward if helpful.
Regards,
Sipra -
How can I add a new field in selection screen for this report
*& Report ZGS_BARKODLA_HIZLI_GIRIS
report zgs_barkodla_hizli_giris.
tables: mara,
mseg,
mch1,
*mch1,
mkpf,
mchb ,
makt.
type-pools: esp1.
data: i_message_tab type esp1_message_tab_type,
wa_message_tab type esp1_message_wa_type ,
sc_count type i.
ALV
type-pools: slis, kkblo.
data: gs_layout type slis_layout_alv ,
gt_fldcat type slis_t_fieldcat_alv with header line,
gt_header type slis_t_listheader with header line,
gt_sortin type slis_t_sortinfo_alv with header line,
g_repid like sy-repid .
define add-fieldcat.
gt_fldcat-fieldname = &1.
gt_fldcat-ref_tabname = &2.
gt_fldcat-seltext_s = &3.
gt_fldcat-seltext_m = &3.
gt_fldcat-seltext_l = &3.
gt_fldcat-reptext_ddic = &3.
gt_fldcat-ddictxt = 'M'.
append gt_fldcat.
clear gt_fldcat.
end-of-definition.
types: begin of titab,
sel type xfeld,
matnr type matnr,
maktx type maktx,
charg type charg_d,
menge type menge_d,
erfmg type erfmg,
end of titab.
data : witab type titab.
data : itab type table of titab.
data : ok_code type sy-ucomm.
controls: tc_itab type tableview using screen 0100.
data: gv_header like bapi2017_gm_head_01,
gv_code like bapi2017_gm_code.
BAPI export parameters
data: gv_headret type bapi2017_gm_head_ret,
gv_matdoc type bapi2017_gm_head_ret-mat_doc,
gv_matyear type bapi2017_gm_head_ret-doc_year.
data : lv_objek like inob-objek .
data : ls_inob like inob .
data : imseg type ty_t_mseg.
data : wmseg type mseg.
data : answer.
data : count type i.
data : v_atinn type atinn.
BAPI movement details
data: i_goodsmvt_items type bapi2017_gm_item_create occurs 0
with header line.
data: i_return type bapiret2 occurs 0 with header line.
start-of-selection.
call function 'CONVERSION_EXIT_ATINN_INPUT'
exporting
input = 'Z_ORAN'
importing
output = v_atinn.
call screen 100.
*& Module status_0100 OUTPUT
module status_0100 output.
set pf-status '100'.
set titlebar '100'.
mseg-werks = 1000.
mseg-umwrk = 1000.
**added
sc_count = sc_count + 1.
if sc_count eq 1.
mseg-bwart = 313.
endif.
mkpf-budat = sy-datum.
**added
describe table itab lines tc_itab-lines.
endmodule. " status_0100 OUTPUT
*& Module user_command_0100 INPUT
module user_command_0100 input.
data field(20).
data: line_t like sy-index.
data: lines like sy-index.
data line_count like sy-loopc.
data: begin of cols,
screen like screen,
index type i,
selected(1) type c,
vislength like icon-oleng,
invisible(1) type c,
end of cols.
case ok_code.
when 'DELE'.
delete itab where sel eq 'X'.
when 'ENTE'.
check *mch1-charg is not initial.
read table itab into witab with key charg = *mch1-charg.
if not sy-subrc is initial.
witab-charg = *mch1-charg.
select single matnr from mch1 into witab-matnr
where charg eq witab-charg.
if not syst-subrc is initial.
set cursor field '*MCH1-CHARG'.
message e115(12) with *mch1-charg.
endif.
select single maktx from makt into witab-maktx
where matnr eq witab-matnr
and spras eq syst-langu.
witab-erfmg = 1.
concatenate witab-matnr witab-charg into lv_objek .
clear ls_inob .
select single * into ls_inob
from inob
where objek = lv_objek and
klart = '023' and
obtab = 'MCH1' .
select single atflv from ausp into witab-menge
where objek = ls_inob-cuobj and
klart = '023' .
append witab to itab.
**added
clear *mch1-charg.
**added
endif.
when 'SAVE'.
if mkpf-budat is initial.
set cursor field 'MKPF-BUDAT'.
message e055(00).
endif.
if mseg-lgort is initial.
set cursor field 'MSEG-LGORT'.
message e055(00).
endif.
if mseg-umlgo is initial.
set cursor field 'MSEG-UMLGO'.
message e055(00).
endif.
if mseg-bwart is initial.
set cursor field 'MSEG-BWART'.
message e055(00).
endif.
refresh imseg.
loop at itab into witab.
move-corresponding witab to wmseg.
append wmseg to imseg.
endloop.
call function 'ZMM_POPUP_WITH_DATA'
exporting
imseg = imseg
importing
answer = answer.
if answer eq 'Y'.
perform create_goods_movement.
endif.
when 'P--'.
clear ok_code.
perform paging using 'P--'.
set cursor field 'MARA-MATNR' line 1.
when 'P-'.
clear ok_code.
perform paging using 'P-'.
set cursor field 'MARA-MATNR' line 1.
when 'P+'.
clear ok_code.
clear lines.
perform paging using 'P+'.
set cursor field 'MARA-MATNR' line 1.
when 'P++'.
clear ok_code.
perform paging using 'P++'.
set cursor field 'MARA-MATNR' line 1.
when 'SORA'.
read table tc_itab-cols into cols with key selected = 'X'.
if sy-subrc is initial.
field = cols-screen.
field = field+5(10).
sort itab ascending by (field).
endif.
when 'SORZ'.
read table tc_itab-cols into cols with key selected = 'X'.
if sy-subrc is initial.
field = cols-screen.
field = field+5(10).
sort itab descending by (field).
endif.
when 'PRNT'.
perform write_alv.
endcase.
endmodule. " user_command_0100 INPUT
*& Module read_table OUTPUT
module read_table output.
mara-matnr = witab-matnr.
makt-maktx = witab-maktx.
mch1-charg = witab-charg.
mseg-menge = witab-menge.
mseg-erfmg = witab-erfmg.
line_count = sy-loopc.
endmodule. " read_table OUTPUT
*& Module write_table INPUT
module write_table input.
witab-matnr = mara-matnr.
witab-maktx = makt-maktx.
witab-charg = mch1-charg.
witab-menge = mseg-menge.
witab-erfmg = mseg-erfmg.
modify itab from witab index tc_itab-current_line.
endmodule. " write_table INPUT
*& Module exit INPUT
module exit input.
leave to screen 0 .
endmodule. " exit INPUT
*& Form create_goods_movement
form create_goods_movement .
clear : gv_header, i_return[], i_goodsmvt_items[].
gv_header-doc_date = gv_header-pstng_date = mkpf-budat.
gv_header-pr_uname = sy-uname.
GM with reference to reservation
loop at itab into witab.
i_goodsmvt_items-material = witab-matnr.
i_goodsmvt_items-entry_qnt = witab-erfmg.
i_goodsmvt_items-entry_uom = 'ST'.
i_goodsmvt_items-move_type = mseg-bwart.
i_goodsmvt_items-plant = mseg-werks.
i_goodsmvt_items-stge_loc = mseg-lgort.
i_goodsmvt_items-move_plant = mseg-umwrk.
i_goodsmvt_items-move_stloc = mseg-umlgo.
i_goodsmvt_items-batch = witab-charg.
append i_goodsmvt_items.
endloop.
find BAPI processing transaction
if gv_code is initial.
perform determine_bapi_code using mseg-bwart
changing gv_code.
endif.
call function 'BAPI_GOODSMVT_CREATE'
exporting
goodsmvt_header = gv_header
goodsmvt_code = gv_code
importing
goodsmvt_headret = gv_headret
materialdocument = gv_matdoc
matdocumentyear = gv_matyear
tables
goodsmvt_item = i_goodsmvt_items
return = i_return[].
cancel blocking process
loop at i_return where type eq 'E' or type eq 'A' or type eq 'X'.
exit.
endloop.
if sy-subrc ne 0.
refresh i_message_tab.
call function 'BAPI_TRANSACTION_COMMIT'
exporting
wait = 'X'.
wa_message_tab-msgid = 'M7'..
wa_message_tab-msgty = 'S'.
wa_message_tab-msgno = '060'.
wa_message_tab-msgv1 = gv_matdoc.
wa_message_tab-msgv2 = ''.
wa_message_tab-msgv3 = ''.
wa_message_tab-msgv4 = ''.
append wa_message_tab to i_message_tab.
else.
refresh i_message_tab.
call function 'BAPI_TRANSACTION_ROLLBACK'.
write a message as there is an unexpected error.
loop at i_return.
wa_message_tab-msgid = i_return-id.
wa_message_tab-msgty = i_return-type.
wa_message_tab-msgno = i_return-number.
wa_message_tab-msgv1 = i_return-message_v1.
wa_message_tab-msgv2 = i_return-message_v2.
wa_message_tab-msgv3 = i_return-message_v3.
wa_message_tab-msgv4 = i_return-message_v4.
append wa_message_tab to i_message_tab.
endloop.
endif.
call function 'C14Z_MESSAGES_SHOW_AS_POPUP'
tables
i_message_tab = i_message_tab.
endform. " create_goods_movement
*& Form determine_bapi_code
form determine_bapi_code using p_bwart type bwart
changing p_code type bapi2017_gm_code.
data: lt_t158b type table of t158b with header line.
clear p_code.
select tcode from t158b into corresponding fields of table lt_t158b
where bwart eq p_bwart.
loop at lt_t158b.
select single gmcode from t158g into p_code
where tcode eq lt_t158b-tcode.
if sy-subrc is initial.
exit.
endif.
endloop.
endform. " determine_bapi_code
*& Form paging
form paging using code.
data: i type i,
j type i.
case code.
when 'P--'. tc_itab-top_line = 1.
when 'P-'.
tc_itab-top_line = tc_itab-top_line - line_count.
if tc_itab-top_line le 0.
tc_itab-top_line = 1.
endif.
when 'P+'.
i = tc_itab-top_line + line_count.
j = tc_itab-lines - line_count + 1.
if j le 0.
j = 1.
endif.
if i le j.
tc_itab-top_line = i.
else.
tc_itab-top_line = j.
endif.
when 'P++'.
tc_itab-top_line = tc_itab-lines - line_count + 1.
if tc_itab-top_line le 0.
tc_itab-top_line = 1.
endif.
endcase.
endform. " paging
*& Form write_alv
form write_alv .
perform find_list_header.
perform fill_field_cat.
perform fill_sortinfo.
g_repid = sy-repid.
gs_layout-colwidth_optimize = 'X'.
gs_layout-zebra = 'X'.
answer = 'Y'.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_buffer_active = ''
i_callback_program = g_repid
i_save = 'A'
i_callback_top_of_page = 'TOP_OF_PAGE'
is_layout = gs_layout
it_fieldcat = gt_fldcat[]
it_sort = gt_sortin[]
tables
t_outtab = itab[].
endform. " write_alv
Form find_list_header
form find_list_header.
data : v_datum(10),
v_datlo(10),
v_dathi(10),
v_uzeit(8).
clear: gt_header, gt_header[].
gt_header-typ = 'H'.
gt_header-info = sy-title.
append gt_header.
clear gt_header.
gt_header-typ = 'S'.
gt_header-key = 'Çalıştırma Zamanı : '.
write syst-datum to v_datum.
write syst-uzeit to v_uzeit.
concatenate v_datum '/' v_uzeit into gt_header-info.
append gt_header.
endform. " find_list_header
Form fill_field_cat
form fill_field_cat.
refresh gt_fldcat.
clear gt_fldcat.
gt_fldcat-key = 'X'.
add-fieldcat 'MATNR' 'MARA' ''.
add-fieldcat 'MAKTX' 'MAKT' ''.
add-fieldcat 'CHARG' 'MSEG' ''.
gt_fldcat-do_sum = 'X'.
add-fieldcat 'MEINS' 'MARA' 'Olcu Birimi '.
gt_fldcat-do_sum = 'X'.
add-fieldcat 'ERFMG' 'MSEG' 'Adet'.
endform. " fill_field_cat
Form fill_sortinfo
form fill_sortinfo.
gt_sortin-up = 'X'.
gt_sortin-fieldname = 'MATNR'. append gt_sortin.
endform. " fill_sortinfo
Form top_of_page *
form top_of_page.
call function 'REUSE_ALV_COMMENTARY_WRITE'
exporting
i_logo = 'ZKUTAS'
it_list_commentary = gt_header[].
endform. " top_of_pageHI,
if it is a normal report program then you can directly create a Selection screen field.
After the Type-pool you can use Parameters or Select-options to create the selection screen field..
If it is a Modulpool program then you can create a selection scren field like
SELECTION-SCREEN BEGIN OF SCREEN 1100 AS SUBSCREEN.
PARAMETERS: p1(10) TYPE c.
SELECTION-SCREEN END OF SCREEN 1100.
defines a selection screens 1100 as subscreens.
The next screen number of screen 100 is 100 (statically-defined).
PROCESS BEFORE OUTPUT.
MODULE status_0100.
CALL SUBSCREEN area INCLUDING sy-repid number.
PROCESS AFTER INPUT.
MODULE cancel AT EXIT-COMMAND.
CALL SUBSCREEN area.
MODULE user_command_0100.
look at the below link
http://help.sap.com/saphelp_nw2004s/helpdata/en/e7/deb237b9a9a968e10000009b38f8cf/content.htm
Regards
Sudheer -
Field Validation on Read Only Field
I'm trying to create a pop up error box if a field contains null values. The problem is that the field I'm trying to do the validation on is a read-only field. It's the Account field on the Contact Object or Module. It won't allow me to include validation. The goal here is to have a POP UP ERROR box come up if someone does not select a value for that field. Making it required doesn't generate a popup box, it only has a small "required" text next to the field which can be easily missed by a user. Any ideas?
Hi !
I found the way to do what you wan't, but it sounds a bit strange for me...
You have to put a field validation on the Account Id field. I made some tests to know what is in the AccountId field when it's blank and i see that the value is "No Match Row Id" !!
So your validation rule must be simply
*<> "No Match Row Id"*
It worked for me, the error message appears... But I think this is something we have to report to Oracle...
Hope this will help, feel free to ask more !
Max -
Unable to have field in selection screen of Infopackage
Hello Gurus,
I have a small problem,
I am unable to bring on field in selection screen in Infopackage,
even thou the object is ticket in DataSources selection option,
I have noted that the object is of type DEC is it something to do with,
Or is their any other way to have this object in selection screen of Infopackage,
Please help me on this,
Thanks & Regards,Bhanu its field type is DEC thats why its not coming in selection screen in Infopackage .This is a big problem in our Development as this field is SPRIO(Procurement Priority) and we want to restrict this field with conduction SPRIO EQ 1.
Our DataSource is based on Infoset , Bhanu is it possible to restrict this Field in Infoset writing some code. As their is option in Infoset for CODE we tried this but didnt work.
or any other way to restrict this field with 1.
I really appreciate your reply.
Thanks Once again. -
Adding customer field to selection screen of RFKORD11 - Customer Statement Printing Program:
Hello,
We are required to add an important customer field to selection screen of customer
statement printing program: RFKORD11 for our South African branch.
Please advise us regarding this matter,
is there a proper user-exit or a repair is needed?
Kind Regards.Enhancement
text
F050S001
FIDCMT, FIDCC1,
FIDCC2: Edit user-defined IDoc segment
F050S002
FIDCC1: Change
IDoc/do not send
F050S003
FIDCC2: Change
IDoc/do not send
F050S004
FIDCMT, FIDCC1,
FIDCC2: Change outbound IDoc/do not send
F050S005
FIDCMT, FIDCC1,
FIDCC2 Inbound IDoc: Change FI document
F050S006
FI Outgoing IDoc:
Reset Clearing in FI Document
F050S007
FIDCCH Outbound:
Influence on IDoc for Document Change
F180A001
Balance Sheet
Adjustment
FARC0001
Enhancements within
archiving (FI)
FARC0002
Additional Checks for
Archiving MM Vendor Master Data
FEDI0001
Function exits for
EDI in FI
FICT0001
Exits for
inter-company transactions
RFAVIS01
Customer Exit for
Changing Payment Advice Segment Text
RFBVX001
Enhancement for bank
directory transfer (Austria)
RFEPOS00
Line item display:
Checking of selection conditions
SAPLBANK
User exit: Bank data
SAPLF040
WF: Preliminary
posting (authorized for release)
SAPLF051
Workflow for FI
(pre-capture, release for payment)
SAPLFCPD
One-time account data
or different payee in booking
SAPLSSRV
User exit: Bank
account numbers
RFKORIEX
Automatic
correspondence
please check which one is better . -
Validating field on selection screen
wht is the meaning of validation
how to validate a particular field on selection screen
suppose parameters:p_vkorg like vbak-vkorg.
how to validate p_vkorg.
pz give me codingHello pavan,
Validation means "checking whether the input which u are gining to the selection secreen is valid or not". means...
Lets take your example only...
parameters:p_vkorg like vbak-vkorg.
in selection screen you will give inout in that parameter....
users can give any input... lets suppose I'll give input as ABC... which is not in the table VBAK. No need to excute the code once we came to know that the input is not there in the table. So we will do validation like...
at selection-screen on p_vkorg.
select * from vbak where vkorg = p+vkorg. " This is the case with Parameter.
at selection-screen on p_vkorg.
Select * from vbak where vkorg = p+vkorg. " This is the case with Selct-option.
if the input that u r giving is present in the table... the above stmt will execute successfully, otherwise not.
You can make use of System variable SY-SUBRC and you can go ahead with ur coding...
Reward If Helpful
Regards
Sasidhar Reddy Matli.
Message was edited by:
Sasidhar Reddy Matli -
How to make a field in selection screen as READ_ONLY !!
Hi,
How to make a field in selection screen as READ_ONLY !!.
Thanks,
SenthilThis is the code you need to have in your program.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF SCREEN-NAME = 'MYSELFLD'.
SCREEN-INPUT = 0.
MODIFY-SCREEN.
ENDIF.
ENDLOOP. -
How to add Material type(MTART) field on Selection screen of MB5B transaction code.
Hi All,
Please let me know how to add material type field on selection screen of MB5B transaction
For that i made copy ZMB5B_COPY of original report RM07MLBD.
Thanks in adv .
SamadhanHi,
Once you copied the standard report to Z report, you can MTART in selection screen like below.
and in order to inlcude the same in programming logic, we have three option.
1) Check all related select queries, and include MTART in SELECT query using inner join with MARA.
2) In START-OF-SELECTION event fill MATNR as shown below.
3) If user entered any value in MTART, then before displaying the report just check material type of each material in the final internal table(which is used to display report) delete enteries from internal table accordingly.
START-OF-SELECTION.
IF MTART[] IS NOT INITIAL AND MATNR[] IS INITIAL.
SELECT MATNR FROM MARA INTO MATNR-LOW WHERE MTART IN MTART.
MATNR-OPTION = 'EQ'.
MATNR-SIGN = 'I'.
APPEND MATNR.
CLEAR MATNR.
ENDSELECT.
ENDIF.
The above option has one limitation: The selection screen variables has some restriction, please read the below thread.
Facing problem in select statement dump DBIF_RSQL_INVALID_RSQL CX_SY_OPEN_S
Getting Dump in the select query has more than 2000 entries
Hope this will work for you .
regards,
Rajesh Sadula. -
Query regarding F4 help on a field in Selection Screen.
Hi all,
I am trying to attach a F4 help on a field in Selection Screen.
The code fragment I wrote for this purpose is:
AT SELECTION-SCREEN ON VALUE-REQUEST FOR m_cbu.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
DDIC_STRUCTURE = ' '
retfield = 'CBU_MANAGER'
PVALKEY = ' '
DYNPPROG = sy-cprog
DYNPNR = sy-dynnr
DYNPROFIELD = 'M_CBU'
STEPL = 0
WINDOW_TITLE =
VALUE = ' '
VALUE_ORG = 'S'
MULTIPLE_CHOICE = ' '
DISPLAY = 'F'
CALLBACK_PROGRAM = ' '
CALLBACK_FORM = ' '
MARK_TAB =
IMPORTING
USER_RESET =
tables
value_tab = tb_cbu_m
FIELD_TAB =
RETURN_TAB = t_return
DYNPFLD_MAPPING =
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Still, I am unable to get any F4 help?
Please point out the mistake..
Thanks in advance.Hi Thien,
My entire code is as follows-
TYPES:
BEGIN OF cbu_m,
cbu_manager TYPE uname,
END OF cbu_m.
DATA:
tb_cbu_m TYPE TABLE OF cbu_m,
wa_cbu_m TYPE cbu_m.
wa_cbu_m-cbu_manager = '123'.
APPEND wa_cbu_m TO tb_cbu_m.
wa_cbu_m-cbu_manager = '234'.
APPEND wa_cbu_m TO tb_cbu_m.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR m_cbu.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
DDIC_STRUCTURE = ' '
retfield = 'CBU_MANAGER'
PVALKEY = ' '
dynpprog = sy-repid
dynpnr = sy-dynnr
dynprofield = 'M_CBU'
STEPL = 0
WINDOW_TITLE = 'ABC'
VALUE = ' '
value_org = 'S'
MULTIPLE_CHOICE = ' '
display = 'F'
CALLBACK_PROGRAM = ' '
CALLBACK_FORM = ' '
MARK_TAB =
IMPORTING
USER_RESET =
TABLES
value_tab = tb_cbu_m
FIELD_TAB =
return_tab = t_return
DYNPFLD_MAPPING =
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Here I am getting the same message "No Values Found"..
Please point out the mistake in my code. -
Add custom fields on selection screen and ouput in Transaction QM11
Hi All,
i have the requirement to enhance the transaction qm11( Report : RQMELL10) to add the custom fields on the report selection screen and in the report output.
i tried to add the fields on selection screen by copy the standard program RQMELL10 to custom one. and tried to add the fields above to the coding tab but i am not able to display the text for those fields of select-options. can any one help me is it the right way to copy the standard program to custom program and adding the custom fields and how to get the text element for the custom fields which we are going to add it. i tried to add the text element in program text elements but it is not appering on the report.
please requeting the help asap if it is possible.Have a glance in below thread.
Enhancing transaction QM10
Also, there are some more threads available in enhancing the QM10 / QM11. Please search those as well.
Maybe you are looking for
-
I just upgraded to from OS X 10.4 server to 10.6 server. I am now having a small problem with permissions. In 10.4 I had a central drive that everyone in our office could drop files to, and anybody in the work group could open and edit those files as
-
Hi, I am new to Interactive Reporting here i have one doubt, i have installed the IR webclient from workspace and when i am trying to open webclient through IR console Tools-> Connection->Web Clients, when i selecte any of the radio buttons it was no
-
I'm want to use the mx:TileList component to display the pictures in a folder. What would I put as the data provider? and what would I put in the item renderer? Item Renderer: <mx:VBox xmlns:mx="http://www.adobe.com/2006/mxml" horizontalAlign="center
-
If someone unblocks me, will he get the old messag...
I'm trying to find out whether I'm blocked in skype by one particular person and does he still receive my messages if I'm not. For sure, I am deleted from that person, but I'm trying to find out whether I'm blocked too. I've send few messages while a
-
Why does quicktime have a question mark when I open Safari - how do I fix?
Whenever I open Safari to any page with Quicktime I get a Q with a questions mark through it. I am about ready to hang myself. Thanks, John