Read only issue

I have file, read/ write on desktop.
It's read write on the laptop via router / network.
But when open now get this new message:
File is being modified by Kevs, open as read- only or choose to be notified or altered when available.
These network/read write issues never seem to end! I'm wiped out, any ideas? thanks!

Uncheck Read Only on the song files in Windows Exploder.

Similar Messages

Read Only Issues

Folks,
Using EPM 2007 with SP2
I have about 4 PM's that are having read only issue with some of their projects, this has just started to happen in the last month or so.
I have sat with them and have gone over their save / checkin method and cannot find fault with what they are doing. As the Admin I can access, update checkin / out etc no problems.
Checking in the "Clean Up Cache" the projects are registering "Not checked out". In the "Open Folder" they have a Cache Status of Checkin Pending.
Any suggestion greatly appreciated
Many thanks
Noel

Hi Sujit
Apologies for the delay, as per your direction all good now
Regards
Noel

Barcode and Read Only Issue

Hi, I submitted this question in LiveCycle Designer and probably should have posted it here....
I have a form that was imported from a PDF document in Adobe LiveCycle Designer ES 8.2. I added a 3 of 9 barcode and the Default value is the form number (*1.764903.105NFS*). I do not want a user to be able to click on the barcode, so I made it Read Only. When this form is opened in Adobe Acrobat, I'm not able to click on the barcode, however, when this form is opened in Adobe Reader, I'm able to click on the barcode and the value displays (the form number) - which is what I do NOT want to happen. I have added Adobe Reader Extensions and I'm opening the form in Adobe Reader 9.4.
Also having the same barcode issue with forms that are designed in LC Designer.

Uncheck Read Only on the song files in Windows Exploder.

CFLock, Read-Only Issues

I am trying to make edits to a previously read-only page. I
have added some queries and when I run the page, the queries are
not run. I have put the queries in a try/catch block and again, not
run. I have even put in random test (i.e. 'asdfasdf') hoping to see
it when I run the page; nothing. Maybe the page is cached or
something? I restarted CF services, but that still didn't help.
It's CF4.5, so maybe there are page caching issues?
Sorry for all the code, but the things I added are the
'asdfasdfasdf' after the InsertConsultant query, and I also added
the get_event_type query and catch try block. Thanks for any
help!

are there still people using cf4.5? man give me some poison
now please! I think cf5 should be banned and if you are still using
4.5 then you probably live in Darfur or something and I would
recommend php as it is free and facebook uses it so it must be
alright!! (hint hint adobe sort it out and make it free you are
leaving us developers out to dry here!!)

Mountain Lion FTP server read only issue

Can anyone help me figure out why my users have read only access via FTP.
1. I created networked users and groups
2. shared some folders
3. activated ftp on one of those shares
First issue was users could access that share via AFP but could not connect via FTP?
Finally I figured out that each user had to have a login shell of /bin/bash.
Aslo had to let each networled user to be bale to log in?
then if i log in with an ftp client it works i can write files but if i log in via finder (apple K) connect to server ftp://server.local i can only get read access and not RW?
I think this may have something to do with passive and active mode but can anyone help?
Why is it so hard to set up?
Thanks

Just so you know the update is, apparently apple has not allowed wright access via ftp thorugh the finder since before 10.2.
So i guess its just one of thos things that apple got rid of.
Sorry unless you use a workaround like. http://code.google.com/p/macfuse/
Good luck

File locked/Read-Only issue in OES2LINUX

We have observed that when the novell connection is idle for some time, then it is creating a second connection upon wakeup. Whatever the opened files in the idle connection are getting read-only.
How to activate the idle connection and prevent creating a second connection? we hope by activating the idle connection, read-only problem can be solved.

Dear Mr.Willem,
Thanks for ur reply.
Client OS: Windows 7 Proff sp1,Novell Client : Novell Client 2 SP1 for Windows 7 (IR5), but this problem is there with all the versions of client.
We have already tried disabling novell client caching and energy saving. Still the problem is not solved.
I've just changed the value of OPLOCK_SUPPORT_LEVEL to '0' on server. I'll get back to u on this soon.
Rgds,
Ahleia
Originally Posted by magic31
Hi,
Which OS is the client running (version and patchlevel) and which Novell client version?
Two generic things that come to mind:
1) Make sure you have oplocks disabled on the server and also have disabled Novell client caching on the workstation.
2) If this is a fixed workstation, disable energy saving on the network card to see if that helps
Cheers,
Willem

External Hard Drive Read-Only Issue

I have a Samsung M3 portable 2TB hard drive which i used to back up my iMac to take travelling with my Macbook Pro. Today it has turned to read only and everything in the disk utility is greyed out. I haven't used this hard drive on any other machines. I've tried running this in Terminal as advised by KAPPY and here are the results:
sudo chown root:admin
chown: /Volumes/SAMSUNG: Read-only file system
sudo chmod a+rwx
chmod: Unable to change file mode on /Volumes/SAMSUNG: Read-only file system
killall Finder
When opening get info it says 'you can only read' in the sharing & permissions section. This is the first time i've tried to copy anything from the Macbook to the Samsung device since transferring all the data. Also sometimes when I connect the drive it doesn't appear in the sidebar in Finder. Macbook Pro with Retina display running OS X Yosemite v10.10.2.

I have found a solution!
http://www.cnet.com/au/news/how-to-manually-enable-ntfs-read-and-write-in-os-x/
"First ensure that your NTFS drive has a simple single-word name, and then go to the Applications > Utilities folder and launch the Terminal program. In here, run the following command to edit the fstab file (supply your password when prompted):
sudo nano /etc/fstab
The Terminal should now show an editor window for the fstab file, in which you can enter the following all on one line. Be sure to change the word NAME to the name of your drive (it is case-sensitive):
LABEL=NAME none ntfs rw,auto,nobrowse
When finished, press Control-O to save the file, followed by Control-X to exit, and then unmount your NTFS drive and attach it again. When you do so, the system will no longer immediately show it in the Finder, but you can go back to the Terminal and run the following command to reveal it in the hidden Volumes directory where the system mounts all attached drives:
open /Volumes
In the folder that opens, you should see the mounted NTFS volume, and should now be able to copy files to it, or otherwise manage files on it. If you need to access this volume more frequently, you can drag it to the sidebar, or make an alias of it in the location of your choice. You can also view the Volumes directory in Column mode to reveal it as a parent directory, from which you can create an alias instead of doing so on a per-drive basis."
This may only be a temporary fix but hopefully it will last me until I can afford to buy a new drive!

Read only HDD issue

I have read only issue when I connect my HDD to my MBA, I don't want to format my HDD, is there any other way to resolve this?

you can verify your selectionListener event by creating your own custom selection listener
public void mySelectionListener(SelectionEvent selectionEvent) {
FacesContext fc = FacesContext.getCurrentInstance();
String me = "#{bindings.myViewObject1.collectionModel.makeCurrent}"
MethodExpression myMethodExpr = fc.getApplication().getExpressionFactory().createMethodExpression(fc.getELContext(),me, null, new Class[] {SelectionEvent.class});
myMethodExpr.invoke(fc.getElContext(), new Object[] {selectionEvent});
RowKeySet rwKeySet = selectionEvent.getAddedSet();
and in your jspx <af:table selectionListener="#{package1.view.backing_myBackingBean.mySelectionListener}"/>
by that way you can atlest verify whats wrong... ,hope this helps,

Read Only

I am aware of the read only issue but unfortunately I no longer have the receipt or packaging to return my micro cruzer 16g. I was wondering if there was a way to reflash the firmware?

Hello, no you cannot flash the firmware of the usb flash drive and i would not recommend that because it would void the warranty, but you can contact the sandisk support and see if there is a possibility to return the flash drive without a proof of purchase. you can contact them through herehttp://www.sandisk.com/about-sandisk/contact-us/

11g Read-Only repository on Linux

Hi
Currrenty I am struggling with a Read-Only issues on a new install of OBIEE 11g. I have install OBIEE11g on a Linux box and also on a windows server just to use the Repository Administation tool. I then created an ODBC DSN on the windows server to point at repository on the Linux box. The DSN finds the correct repository however when I open the rpd online it always opens it in Read-Only mode so I can't change anything. I have checked the Disallow online RPD updates settings in Enterprise manager under-*> Capacity Management -> Perfromance* and this is correct. Any suggestions or help gratefully received.
Thanks
Andy

Hi Andy,
Did you check or uncheck the 'Disallow online RPD updates'-setting?
http://download.oracle.com/docs/cd/E14571_01/bi.1111/e10541/querycaching.htm
When you checked the setting it seems that it is intended behaviour.
Thanks,
Daan Bakboord
http://obibb.wordpress.com

Administration tool read only access

I was wondering if there is a read only access to the administration tool.
What i am trying to do is to test the repository Build with best practices since this repository is live and done by a group of developers -
Since i joined recently and wanted to know what resources i need to get to view and test the repository.
I was wondering if there is a read only access to admin tool , not sure about this and also do i need oracle BI installed on my local machine to view the repository.
If not ,is there a way where i can get to see the repository without having the priviledges to do any modification or save changes to the repositoryin online or offline mode
Thanks Deva ...
Edited by: UOOLK on 01-Jun-2012 02:48

Hi,
If you want to switch your RPD read only mode to online/Offline mode
try to re start your bi server and then try to access it RPD (online/offline mode)
Setting rpd in read only mode:
users wants to access the RPD in online mode then do below setting in NQSConfig.ini but this will refrain u developers as well to do any change in online mode...
Refer Section: READ_ONLY_MODE
http://download.oracle.com/docs/cd/E12096_01/books/AnyInConfig/AnyInConfigNQSConfigFileRef11.html
otherwise you can give it copy of RPD(he can access it via offline mode)
if your using obiee11g,
Read-Only issues on a new install of OBIEE 11g:(always opens it in Read-Only mode)
Login to Oracle Enterprise Manager Goto -> Business Intelligence -> coreapplication
Click - Capicity Managment Tab in Right side -> Performance -> Check Disable Disallow Online RPD Updates
Thanks
Deva
Edited by: Devarasu on Jun 1, 2012 6:01 PM

(Read-only file system) ,EXT3-fs error (device sda6) in start_transaction, FOR MY MCS7825I3-K9-CMC1

I got this problem for my cucm version System version: 7.0.2.20000-5
Product Part Number: MCS7825I3-K9-CMC1
java.io.FileNotFoundException: /var/log/active/platform/log/cli.bin (Read-only file system)
log4j:ERROR No output stream or file set for the appender named [CLI_LOG].
EXT3-fs error (device sda6) in start_transaction: Journal has aborted   SeverityMatch - Critical kernel: EXT3-fs error (device sda6) in start_transaction: Journal has aborted   SeverityMatch - Critical kernel: EXT3-fs error (device sda6) in
Any Advice to solve this issue ?
Kind Regards
Mohammed khamis
java.io.FileNotFoundException: /var/log/active/platform/log/cli.bin (Read-only file system)
        at java.io.RandomAccessFile.open(Native Method)
        at java.io.RandomAccessFile.<init>(RandomAccessFile.java:212)
        at com.cisco.iptplatform.fappend.ciscoRollingFileAppender.restoreIndex(c                                                                            iscoRollingFileAppender.java:100)
        at com.cisco.iptplatform.fappend.ciscoRollingFileAppender.setFile(ciscoR                                                                            ollingFileAppender.java:43)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.                                                                            java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces                                                                            sorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:585)
        at org.apache.log4j.config.PropertySetter.setProperty(PropertySetter.jav                                                                            a:196)
        at org.apache.log4j.config.PropertySetter.setProperty(PropertySetter.jav                                                                            a:155)
        at org.apache.log4j.xml.DOMConfigurator.setParameter(DOMConfigurator.jav                                                                            a:530)
        at org.apache.log4j.xml.DOMConfigurator.parseAppender(DOMConfigurator.ja                                                                            va:182)
        at org.apache.log4j.xml.DOMConfigurator.findAppenderByName(DOMConfigurat                                                                            or.java:140)
        at org.apache.log4j.xml.DOMConfigurator.findAppenderByReference(DOMConfi                                                                            gurator.java:153)
        at org.apache.log4j.xml.DOMConfigurator.parseChildrenOfLoggerElement(DOM                                                                            Configurator.java:415)
        at org.apache.log4j.xml.DOMConfigurator.parseRoot(DOMConfigurator.java:3                                                                            84)
        at org.apache.log4j.xml.DOMConfigurator.parse(DOMConfigurator.java:783)
        at org.apache.log4j.xml.DOMConfigurator.doConfigure(DOMConfigurator.java                                                                            :666)
        at org.apache.log4j.xml.DOMConfigurator.doConfigure(DOMConfigurator.java                                                                            :616)
        at org.apache.log4j.xml.DOMConfigurator.doConfigure(DOMConfigurator.java                                                                            :584)
        at org.apache.log4j.xml.DOMConfigurator.configure(DOMConfigurator.java:6                                                                            87)
        at sdMain.main(sdMain.java:511)
java.lang.NullPointerException
        at com.cisco.iptplatform.fappend.ciscoRollingFileAppender.updateIndex(ci                                                                            scoRollingFileAppender.java:117)
        at com.cisco.iptplatform.fappend.ciscoRollingFileAppender.nextFileName(c                                                                            iscoRollingFileAppender.java:92)
        at com.cisco.iptplatform.fappend.ciscoRollingFileAppender.append(ciscoRo                                                                            llingFileAppender.java:74)
        at org.apache.log4j.AppenderSkeleton.doAppend(AppenderSkeleton.java:221)
        at org.apache.log4j.helpers.AppenderAttachableImpl.appendLoopOnAppenders                                                                            (AppenderAttachableImpl.java:57)
        at org.apache.log4j.Category.callAppenders(Category.java:187)
        at org.apache.log4j.Category.forcedLog(Category.java:372)
        at org.apache.log4j.Category.info(Category.java:674)
        at sdMain.main(sdMain.java:525)
log4j:ERROR No output stream or file set for the appender named [CLI_LOG].
   Welcome to the Platform Command Line Interface
admin:java.io.FileNotFoundException: /var/log/active/platform/log/cli.bin (Read-only f                                                                            ile system):java.io.FileNotFoundException: /var/log/active/platform/log/cli.bin (Read-only f                                                                            ile system)

Hello
Thanks Manish .
I found many articles in cisco which says that this error is related to the bug which need firmware upgrade , but I don't have support from cisco because EOS.
https://supportforums.cisco.com/document/49511/updated-16-february-2011-ibm-7816-i4-782x-i4-filesystem-errors
Solution
The file-system going read-only issue which has recently been affecting server models MCS-7816-I4, MCS-7825-I4, and MCS-7828-I4 (or their IBM equivilants) in the field is addressed by CSCti52867 - "IBM 7816-I4 and 782x-I4 READONLY file system".
The fix for CSCti52867 is now available and requires the application of two patch files. Install both of these patch files in the order listed below.
1. First install ciscocm.ibm-diskex-1.0.cop.sgn
     The Readme file ciscocm.ibm-diskex-1.0.cop.sgn includes installation instructions for this .cop.sgn.
     Make sure to only install this utility when show hardware CLI output indicates the array is in a healthy state.
     If your server has never had the filesystem go readonly then this step is optional.
2. Next install Cisco-HDD-FWUpdate-3.0.1-I.ISO .
     The Readme file Cisco-HDD-FWUpdate-3.0.1-I.Readme.pdf includes installation instructions for this ISO.
     This installer is completely independant of the OS installed on the server.
Note: Installing the FWUpdate v3.0(1) or later will get you firmware with the fix for this defect. It is always recommended that you apply the latest FWUCD available for your server.
Refer to the Release Note of CSCti52867 and the Readme file for each of the above mentioned patch files for more details.
Symptoms
The file system goes READONLY, then CUCM services may go down, the server may become "unresponsive" meaning that it is not possible to ssh into the server, login to the console, or web into the server although it may still respond to pings.
Traces from all services stop writing (including syslog)
You see the following error on the server console
EXT3-fs error (device sda6) in start_transaction: Jornal has aborted

Issue regarding open word file and read only mode using c# & MS-word interop

i am programmatically open a word file for search and highlight keyword. my routine is working fine. the problem is when i am opening the file programmatically then a dialog come and ask me to open file in read only mode. the dialog look like below one
actually i do not want to open the file in read only mode because people can open and like to change and save. so guide me what i can do to not to open the file in read only mode.
here is my full code. just have a look and tell me what is wrong in my code or tell me any trick as a result i can open the file not in read only mode. here is my code.
private void button1_Click(object sender, EventArgs e)
            object fileName = "";
            string filePath = "";
            string strSaveasPath = "";
            DialogResult result = openFileDialog1.ShowDialog();
            if (result == DialogResult.OK)
                fileName = openFileDialog1.FileName;
                //strSaveasPath = Path.GetDirectoryName(path.ToString());
            //fileName = "Z:\\C0000000003.doc";
            List<string> _list = new List<string>();
            _list.Add("tridip");
            _list.Add("arijit");
            //object fileName = "D:\\CVArchievePath\\C0000000001.doc";
            object textToFind = "test";
            object readOnly = false;
            Word.Application word = new Word.Application();
            Word.Document doc = new Word.Document();
            object missing = Type.Missing;
            try
                doc = word.Documents.Open(ref fileName, ref missing, ref readOnly,
                                          ref missing,
ref missing, ref missing,
                                          ref missing,
ref missing, ref missing,
                                          ref missing,
ref missing, ref missing,
                                          ref missing,
ref missing, ref missing,
                                          ref missing);
                doc.Activate();
                object matchPhrase = false;
                object matchCase = false;
                object matchPrefix = false;
                object matchSuffix = false;
                object matchWholeWord = false;
                object matchWildcards = false;
                object matchSoundsLike = false;
                object matchAllWordForms = false;
                object matchByte = false;
                object ignoreSpace = false;
                object ignorePunct = false;
                object highlightedColor = Word.WdColor.wdColorGreen;
                object textColor = Word.WdColor.wdColorLightOrange;
                object missingp = false;
                Word.Range range = doc.Range();
                foreach (string line in _list)
                    textToFind = line;
                    bool highlighted = range.Find.HitHighlight(ref textToFind,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing);
                System.Diagnostics.Process.Start(fileName.ToString());
            catch (Exception ex)
                Console.WriteLine("Error : " + ex.Message);
                //Console.ReadKey(true);
            finally
                //doc.Close(missing, missing, missing);
                if(doc!=null)
                    System.Runtime.InteropServices.Marshal.ReleaseComObject(doc);
                if (word != null)
                    System.Runtime.InteropServices.Marshal.ReleaseComObject(word);
                word = null;
                doc = null;
                GC.Collect();
                GC.WaitForPendingFinalizers();

I know it's a very old issue and I reached to this page looking for a solution. Finally, I have found a fix to this problem.
The problem is that we create an instance of Word and do not close it correctly. This makes program believe that the file is already open and hence you're getting the respective message of file being locked by you.
Set the visibility of your application to true and then when you close it both file and instance should close and you will not get the problem again.

[SOLVED] Root mounted as "Read-only filesystem". mkinitcpio issue?

I am currently in the middle of setting up system encryption with LUKS. I have been making good progress so far, but I do have one remaining issue.
After typing my LUKS password, the Linux kernel starts to complain that root is a read-only filesystem. "Starting NetworkManager... cannot touch file XYZ: Read-only filesystem". When it has finally finished booting, I am dropped into a TTY. I can log in and cat my files, but I cannot write to any files our use any programs that do (like pacman).
I wonder if this is an mkinitcpio issue, but I am not sure. For whatever it's worth, here's my basic setup:
* /dev/sda1: Boot
* /dev/sda2: Swap
* /dev/sda3: Root (LUKS/ext4)
* menu.lst looks like this
* /etc/fstab contains this line:
/dev/mapper/root / ext4 defaults 0 1
* /etc/mkinitcpio.conf contains these lines:
MODULES="ext4"
HOOKS="base udev pata scsi sata encrypt filesystems"
edit: I should note that I did reinstall the kernel after making those edits to mkinitcpio.conf.
Any idea what I'm doing wrong? As always, I really do appreciate the help. Thanks in advance!
Last edited by jalu (2011-04-16 22:14:20)

So it looks like this major problem was caused by a minor mistake. The file /etc/rc.sysinit was not executable. This made it impossible for the kernel to run the script, which in turn made it impossible for the kernel to mount /dev/sda2 (the swap partition) at /dev/mapper/swap. For some unknown reason, this in turn caused /dev/sda2 to be mounted at /, messing everything up.
Anyway, a simple sudo chmod +x /etc/rc.sysinit fixed the problem. Thanks for the help, MadTux!

Read only table issue

By default, read only table should take selected row as current row as long as we have
selectedRowKeys & selectionListener within table definition. But, it doesn't, why?
How to resolve this issue? Thanks.

you can verify your selectionListener event by creating your own custom selection listener
public void mySelectionListener(SelectionEvent selectionEvent) {
FacesContext fc = FacesContext.getCurrentInstance();
String me = "#{bindings.myViewObject1.collectionModel.makeCurrent}"
MethodExpression myMethodExpr = fc.getApplication().getExpressionFactory().createMethodExpression(fc.getELContext(),me, null, new Class[] {SelectionEvent.class});
myMethodExpr.invoke(fc.getElContext(), new Object[] {selectionEvent});
RowKeySet rwKeySet = selectionEvent.getAddedSet();
and in your jspx <af:table selectionListener="#{package1.view.backing_myBackingBean.mySelectionListener}"/>
by that way you can atlest verify whats wrong... ,hope this helps,

Read only issue

Similar Messages

Maybe you are looking for