Read Only Key Figure in APO DP

Dear Friends ,
Need help in the mentioned scenario :
One Planning Book with two data views due to change in portfolio say regional manager and area manager .
Key Figure updation of market intelligence by regional manager in his data view to be shown in the data view of the area manager data view but with no access to write on the key figure - market intelligence by regional manager .
Please support .
Thanks

Hi Gurav,
Answer for your question:
1. If you want to make key figures as read only then you can goto design mode> select key figure> right click and select output only.
2. If you want to make seperate roles for both region manager and area manager you need not create two planning books but when you create roles you can assign data views to respective users. ( authorisation object is C_APO_PB, in that data view is APO_DVIEW)
Hope this helps.
Regards,
Jagadeesh.
Pls reward some points if it helps.

Similar Messages

Planning Book Macro which can read different key figures from data views

Hi Experts,
I am looking for help to create a Planning book level macro which is having capabilities to read different Key Figure across the different Data Views. For example DataView 1 has Sales Orders and Data view 2 has Forecast and I want put in Data view 3 the netted numbers from SO and Forecast.
Please provide me some quick pointers.
Regards,
Rahul Mohnot

Hi,
Not only is it the easiest way, it is the only way to do it as Laurence has put it. As you can see, macro workbooks are created for a Planning Book/Dataview combination.
Thanks
Mani

Open sales orders key figure in APO

HI Gurus,
Can anyone please throw some light as to where i need to be looking in this scenario. Our BW resource extracts open sales order quantity from ECC and loads into APO DP. The issue that i'm seeing is the open sales order quantity key figure is not getting updated properly in APO. For example to begin with we have a quantity of 800 EA in the period of 12/2014 (we go by fiscal period and in this case 12 would represent September 2014), 01/2015(October 2014), 02/2015(November 2014). The customer service group has deleted the quantity completely from period 12/2014 (September 2014) in ECC. But when i look in the planning book in APO, i can still see the quantities in the periods of 12/2014, 01/2015 and 02/2015. I was expecting the quantity from the period of 12/2014 to not showup in APO as it has been deleted in ECC. Our BW resource also confirms that he has loaded it properly in APO. Where can i start looking to resolve this issue.
Thanks
Ravi

Dear Subhash, Thanks for your reply and i apologize as APO DP is new to me and i'm picking up things, can you please guide me to which tcode should i be going and checking this. Also reloading the planning area can you xplain a little more please
Okay i have checked in the tcode /SAPAPO/TSCUBE and this is setup in the process chain for us which runs once a month on the opening day of the period. I hope this is what you were referring to?
Under the key figure assignment in TSCUBE tcode, i see that the 'Add data" check box is not checked under Target area.

Are KPIs only key figures?

Hai All,
KPI(Key performance Indicator). can this be only a key figure or can it be a characteritic also? For example Status of a project.
I appreciate if anybody can clarify this...
Thanks.

Hi,
When we are talking about KPIs, we have to think in Business level. KPIS are indicators which can be used to evaluate the Organization's strentgh and weekeness. So when we compare this with BW objects, the chance for characterstics to be consider as KPI is very very less.
'Status of a project' is mostly not a KPI for high level people of the organization.But the no of complted projects or no of incomplete projects surely becomes as KPI.
And also KPIS are different at different parts of Organization. Some where in the organization, one Issue(either characterstic or KF object in BW) can become as KPI,But it may not be KPI at other level.
With rgds,
Anil Kumar Sharma .P

Reports with only key figures? How to layout?

Hi anyone,
Could you kindly advise? I have a financial report which is about 20 key figures ex. Sales, Cash discounts, Revenue from operations, Gross Margin, Operating profit and Overheads % of sales...
For each of these areas I need to have 9 seperate numerical values:
Actual value (by month)
Last Year value (by month):
Budget value (by month)
Actual value ( year to date)
% of sales (ytd)
Last year value (ytd)
Budget value (ytd)
Full yr value (full yr)
Budget value (full yr)
This can lead to 20keyfiguresX9timeperiods = 180 numbers in the report. As I don't have any characteristics, it seems I'll end up with a very very long row.. Has anyone experience fixing this sort of issue?

Hi
Sorry for the earlier post for not explaining...
There are two ways you can do.
First way is meddling with the modelling....
Create 9 infoobject charecterisitcs with CHAR TYPE NUM and feed them with the key figures timeperiods thru update rule routine......Use this 9CHAR -> fed by kfs into Cube and you can use 2 structures...as far as the system is concerned you are using one structure of kf and one for chars.......
Second way...if ur using BEx you can think of Macros
Regards
N Ganesh

The macro attempted to modify a key figure that is not locked

Hi
In my planning area I choosen detailed lock, keyfigure specific lock and do not lock read only keyfig after that In interactive DP, I have 2 Planning Books A and B .when I load the selection for book A itu2019s loaded well because all are editable key fig but when I load book B I get error u201CThe macro attempted to modify a key figure that is not lockedu201D in this book 3are editable keyfig 3 are display. I am in SAP SCM 7.0,I had seen the SAP NOTE 851731but its too old i think now iam in advanced that that but that note is not there in my system .
Any ideas on why this is happening?
Regards
siva
Edited by: sivaram2411 on Feb 3, 2012 1:52 PM

Hello,
According to your setting in the palnning area ("do not lock read-only key figures"), if you have set a key figure as "Output Only" in /sapapo/mc8b or by a default macro, then this key figure could not get locked.
It is not allowed to make changes to unlocked key figures. So if there's a macro that tries to update this key figure, you'll get the error message.
If you have "do not lock read-only key figures" set, you must make sure that your macros do not make changes to those key figures that are output only (read only).
Best Regards,
Ada

Does Fixing Key figure be part of Planning area?

Hi,
I saw the post by David and this question popped from there. The answer may be simple but I just want to confirm it.
If I am fixing a key figure A and storing the fixing information in another key figure B. I specify the Key Figure B in Key figure A definition (RSD1) as the fixing key figure.
I also know that both key figures A and B are APO key figures.
Now the question is: Do we need to include both A and B in the planning area and planning book even though I need only key figure A?
Thanks.

We can wait for more people to respond, however here is my view.
Fixed TS Key Figures actually maintains the fixed component of the primary key figure. It can have its own disagg logic and in most business cases, it will be same as the primary key figure. It needs to be intialized for the same time zone as that of the primary keyfigure which is only possible if both the keyfigures co-exist in a planning area. Figuratively take the Fixed Key Figure as a twin of the primary Key Figure which holds only a certain portion of the primary determined as fixed. The fixing logic will not work correctly if its configuration is not similar to the one of primary.

Webtemplates - Disply Group Of Key Figures based on the selection criteria

Hello,
I have a requirement of displaying Kefigures based on the selection criteria in the browser.
Assume that I have Query with the following set of key figures.
Plan_KF in units CSE
Actual_KF in units CSE
Difference in units CSE
Plan_KF in units T3
Actual_KF in units T3
Difference in units T3
Plan_KF in units PAK
Actual_KF in units PAK
Difference in units PAK
1) I should have drop down box with values
CSE
T3
PAK
2) If user selects PAK then query should display only the key figures with units in PAK
i.e.
Plan_KF in units PAK
Actual_KF in units PAK
Difference in units PAK
If user selects CSE the query should display only key figures
Plan_KF in units CSE
Actual_KF in units CSE
Difference in units CSE
I tried using the DropDown Box - (not much usefull to select more than one Key Figure)
and CheckBox web items - I have to do multiple selections (Not very much suitable if the Key figures are too many).
I appreciate your timely help.
system specifications:
SAP_BW - 310
Front-End - 6.20
Advanced Thanks,
Ramana

Hi,
One alternative would be to save two additional copies of the query (each with different units) and code your dropdown box with the RESET_DATA_PROVIDER command.
So if your queries were:
Z_QUERY_CSE
Z_QUERY_T3
Z_QUERY_PAK
You would define the default unit (I'll assume CSE) in yoru web template, and code your dropdown box entries to switch the Data Provider (I'll asume DP1) to the appropriate query.
The code behind "T3" in your dropdown box would be:
<SAP_BW_URL DATA_PROVIDER='DP1' CMD='RESET_DATA_PROVIDER' INFOCUBE='Z_CUBE1' QUERY='Z_QUERY_T3'>
http://help.sap.com/saphelp_nw04/helpdata/en/bd/43143c1ab8ff1ae10000000a11405a/frameset.htm
Two things to look out for in this work-around:
1) Number of queries increases by a factor of 3
2) Performance implication in replacing the data provider with a new query.

Cant get com.apple.security.files.user-selected.read-only entitlement to work

Hey I am curious how can I get the .ipa compiled file for iOS to be able to read all the directories on the iPhone?
I made a file browser but I cant get to the pictures
I tried adding the entitlements in Flash Builder 4.6 in the descriptor file like this:
<key>com.apple.security.files.user-selected.read-only</key>
<true/>
<key>com.apple.security.assets.movies.read-only</key>
<true/>
<key>com.apple.security.assets.pictures.read-only</key>
<true/>
in the
<iPhone>
<Entitlements>
<![CDATA[
I got Push notifications working and accepted in the app store but it can't read the pictures directory when browsing for a file
I know the app id and stuff is set up right or I wouldnt have been able to get it accepted in the app store. In the entitlements area of course I have the application identifier set and aps-environment and keychain access groups and whatnot set up right.
When I try to put the app onto the iPhone with iTunes it just says 'Entitlements are not valid' (does not mention anything about mismatched ids) I can't find anything about how to add this entitlement and I could have sworn I saw a thing that said I can just use the descriptor file to add entitlements in some of the documentation I have it set to use air 3.4
Is there something I am doing wrong, how do I get apple to just put these entitlements in the mobileprovision file, I cant seem to edit it, if I do I also get an error in itunes that is some hex code...

Did you ever solve your problem?
I just transfered my web hosting and e-mail to bluehost. I had some of the same problems you are having. I noticed you have your incoming server set to bluehost.
Incoming mail server: (SSL) box610.bluehost.com (sever requires authentication which I already have done)
If bluehost is your server this is what worked for me:
Account Information
Account type— POP
Description—anything you want
Email Address—in your case would be [email protected]
Full name— first and last name
Incoming server—mail.magnus.com
User name—[email protected] Notice it is the @ symbol not a +
password— your password . Remember they are case sensitive
Outgoing Mail server—select edit smpt server list from the drop down window
select the + to add a server
Account Information
Description—may be left blank
Server name—mail.magnus.com
TSL Certificate—None
Advanced
Use default ports
Check Use SSL
Authenticate—password
Username—[email protected]
passowrd—your password
Click ok
In the accounts window
Outgoing SMTP— select the server you just created.
Check—use only this server
Select the Advance tab next to the Mailbox Behaviors
Check use SSL— it will be port 995
Authenticate —use password
Ann

Query with a hidden key figure

I would like to build a query which will include just one key figure which will be hidden is this possible? Thanks

Hi akreddy,
There will be no results if the query has only one key figure and it is hidden.
Such query makes no sense to me.
The only logical way I can think of having this query is: have this only key figure properties as Hidden (Can be Seen).
so users can change the local setting of the query when they want to see the report results.
Feng

Removing Key Figures during Execution

Hi, is there any way to remove any type of Key Figure, from the Key Figure structure during execution time? If so, how about adding them into the Key Figure structure as well?
Ex. I have Calculated KF A, and B. I want to have a button on a Web Template that removes KF B from the entire KF structure. When it does this action, the only Key Figure shown is KF A.
Any suggestions? Is there even a function/method in a class to do that? Even a hide function would work for me.
Thanks.
Message was edited by: Angel Henriquez

Hi,
for filtering, please have a look on
http://help.sap.com/saphelp_nw04/helpdata/en/59/edfe395dd76846e10000000a114084/frameset.htm
For an explanation how to get filter_iobjnm (the uid of the structure) and filter_value (the uid of the structure element) please see:
http://help.sap.com/saphelp_nw04/helpdata/en/76/80a1393e3a6942e10000000a11402f/frameset.htm.
To remove the filter just use the command remove_filter
http://help.sap.com/saphelp_nw04/helpdata/en/82/edfe395dd76846e10000000a114084/frameset.htm
Heike

How to transfer from key figure model into account model?

Hello,buddies:
   If I have a datasource wich upload from FLAT FILE contains only key figures and I know every key figure's meaning,then I want to transfer it into account model.
   For example,I have data like this
training fee salary   compensation
    20000          5000         5678
   then I want to transfer this to:
training fee 20000
salary       5000
comp         5678
because the source contains no cost element,and the target contain elements.
   How can I do this?

Hi Martin,
You can use result table functinality in routines of update rules.
Assuming 0COSTELMNT and 0AMOUNT are the target fields
in your cube, value1, value2, value3 represent fields
form flat file/commstructure code for 0AMOUNT could be like this :
RESULT_TABLE-Amount = COMM_STRUCTURE-Value1.
RESULT_TABLE-COSTELMNT = 'training fee'.
append RESULT_TABLE.
RESULT_TABLE-Amount = COMM_STRUCTURE-Value2.
RESULT_TABLE-COSTELMNT = 'salary'.
append RESULT_TABLE.
RESULT_TABLE-Amount = COMM_STRUCTURE-Value3.
RESULT_TABLE-COSTELMNT = 'comp'.
append RESULT_TABLE.
So you generate 3 records for Infoprovider from one out of commstructure.
Regards
Joe

APO key figures - units of measure

I am using APO V5.1.
Via RSA1 I have created a key figure of data type Quantity and unit = 0UNIT.
I have assigned this key figure to my planning area and planning book.
The planning area has unit of measure = CAS, and this is the unit of measure shown for my new key figure in interactive planning.
How can I change the unit of measure for my new key figure to D(ays)?
Thanks for any advice...

Datta,
Thanks for this reply.
I have followed your advice...
I have a key figure with data type 'Number'.
In interactive planning, this key figure is appearing with a blank uom.
In the planning book design, on the 'key figure attributes' tab, I cannot however make any changes to the key figure attributes including uom, as they are greyed out.
Any ideas on this?
Thanks...

Why do we see only values of key figures of a cube in SE11?

Hi all,
When we view the contents of a cube in SE11 why cant we view the characteristics also? Why are only the values of key figures visible to us? Is there any way wherein we can also view the whole contents of the cube i.e. both the characteristics and the key figures?
Please explain.
Thank you.
TR.

SE11 gives you the Table View.
A Infocube is a complex strructure where data is stored in mutiple Tables...
KEy Figure Values in Central Fact Table...Characteristic SIDs in the DIM Table and these SIDs linked to the Master data table values.
So, to be able to read the values , you would need to know how data is organised in an Infocube
Regards.

APO DP - use of key figure change mode 'Redisaggregate'

I am using the macrobuilder in APO DP V5.
Here one can use a 'redisaggregate' change mode for a key figure.
But what is a practical example where this could be relevant and useful?
Thanks,
Bob Austin, Atos Origin

Srinivas,
Thanks for this.
I now understand the concept.
But what does the 'redisaggregate macro' look like?
Suppose I have key figure X with disaggregate key figure APODPDANT.
I have a fcst run at high level, and I recalculate APODPDANT.
What is the structure of the macro to now apply the new APODPDANT values?
Is it something like key figure Y (change mode = redisagg) = key figure X?
Thanks,
Bob.

Read Only Key Figure in APO DP

Similar Messages

Maybe you are looking for