Read-only mode. Object is currently locked by user: J2EE_ADMIN. hw 2 unlock

Hi friends,
<b>i am not able to edit my object in EP</b> , it says
Read-only mode. Object is currently locked by user: J2EE_ADMIN.
how do i unlock it ?
i am on 04s SP9

Hi Rohit,
   Navigate to
system_admin -> Monitoring->
Portal->object_locking->
There you can view your locked pcd object.Just check it and Unlock.
That should solve your problem.
Hope this helps
Regards
Vineeth

Similar Messages

  • Attach Operation is disabled in READ ONLY MODE - solman_setup error message

    Hello Gurus,
    I am in the phase - Connect Diagnostic Agent of the Solman_Setup for Solman 7.0 EHP1.
    I don't have any managed system connected yet.
    When I try to attach the SMD agent in the SLDAgentCandidates screen...I get two messages as detailed below:
    2011.04.13 20:14:12, Managing System 'SL1.SystemHome.sol' is  registered in the SLD, Customization of Managing system settings is disabled but it is not a problem to attach the agent.
    2011.04.13 20:14:12, Attach operation is disabled in READ ONLY MODE. The current logon user is not a member of Administrator
    Please what am I doing wrong because I even gave full authorization (SAP_ALL and SAP_NEW) to user SLDAPIUSER and i have also tried with a few user accounts wilth full authorization like J2EE_ADMIN and my SOLMAN administrator.

    Hello John,
    You get the ead-only message because your connected to the local SLD. You need to connect to the productive SLD.
    But the other message (Customization of Managing system settings is disabled) I get also. Did you solve it already?

  • Not able to open XMind files from IE in read only mode

    I have configured my SharePoint Farm to support .xmind file types
    Below are the steps I have done
    1.  
    Added an entry in DOCICON.XML
        <Mapping Key="xmind" Value="xmind_file1.png" EditText="XMind Mapping Software"  OpenControl="SharePoint.OpenDocuments"/>
    2. Added an entry in htmltransinfo.xml
        <Mapping Extension="xmind" AcceptHeader="application/vnd.xmind.workbook" HandlerUrl="" ProgId=""/>
    3. Added a MiME type 'application/vnd.xmind.workbook' in the Inetmgr.
    Now, xmind files are getting detected, but I am not able to open xmind files in read only mode from IE.
    Xmind files are working perfectly from Mozilla, but my client wants the xmind to be working perfectly from IE.
    Need a help on this issue....

    Hi Aries,
       Please find the screenshot below , while I am trying to open the xmind file in read only mode. It is redirecting the user to a blank page...
    Also please find the extract from the fiddler when trying to open it after selecting the read only mode
    GET http://myserver/sites/Team_test_8/Documents/file1.xmind HTTP/1.1
    Accept: text/html, application/xhtml+xml, */*
    Referer:
    http://myserver/sites/Team_test_8/Documents/Forms/AllItems.aspx
    Accept-Language: en-US
    User-Agent: Mozilla/5.0 (compatible; MSIE 9.0; Windows NT 6.1; WOW64; Trident/5.0)
    Accept-Encoding: gzip, deflate
    Host: myserver
    If-Modified-Since: Tue, 22 Apr 2014 06:40:41 GMT
    If-None-Match: "{3243523D-B412-4437-A587-FA02D4C3C763},9"
    Connection: Keep-Alive
    Cookie: WT_FPC=id=125.22.78.82-1203562128.30325182:lv=1398735003583:ss=1398735003583; WSS_KeepSessionAuthenticated={ce7264f1-49e7-4483-9413-eed8c6929dd7}; ASP.NET_SessionId=knrzwvfb03puo1551qwl3lut
    Authorization: NTLM TlRMTVNTUAABAAAAB4IIogAAAAAAAAAAAAAAAAAAAAAGAbEdAAAADw==
    HTTP/1.1 401 Unauthorized
    Server: Microsoft-IIS/7.5
    SPRequestGuid: 16c42597-cfa9-4993-a19a-539ae9b5a7ec
    WWW-Authenticate: NTLM TlRMTVNTUAACAAAAEAAQADgAAAAFgomiyxgpfwFl18AAAAAAAAAAAKQApABIAAAABgGxHQAAAA9FAFIASQBDAFMAUwBPAE4AAgAQAEUAUgBJAEMAUwBTAE8ATgABABYARQBTAEUAUwBTAE0AVwAyADQAMgA1AAQAFgBlAHIAaQBjAHMAcwBvAG4ALgBzAGUAAwAuAEUAUwBFAFMAUwBNAFcAMgA0ADIANQAuAGUAcgBpAGMAcwBzAG8AbgAuAHMAZQAFABYAZQByAGkAYwBzAHMAbwBuAC4AcwBlAAcACACy5d2OcGPPAQAAAAA=
    X-Powered-By: ASP.NET
    MicrosoftSharePointTeamServices: 14.0.0.6114
    Date: Tue, 29 Apr 2014 06:02:10 GMT
    Content-Length: 0
    Proxy-Support: Session-Based-Authentication

  • Write-protect mode is currently active. The editor is now in read-only mode

    How do i get the portal out of write protect mode.   No matter what i change to do, i get the message
    Write-protect mode is currently active. The editor is now in read-only mode.
    this shows up in the log
    10/06/10 16:21:21 -  ERROR: Not deployed. Deploy Service returned ERROR:
                         java.rmi.RemoteException: Cannot deploy application sap.com/com.sap.pct.bi.tct.BI_Administration..
                         Reason: <--Localization failed: ResourceBundle='com.sap.engine.services.deploy.DeployResourceBundle', ID='Exception during
    deploy: Import aborted - write protect mode is active.

    Hi David,
    Do the following steps:
           1.       Start the Visual Administrator .
           2.       Choose Global Configuration   u2192Server  u2192Services u2192com.sap.portal.pcd.gl .
    The properties of the service are displayed:
                                a.      Pcd.Pl.WriteProtectActivated defines whether or not write-protect mode is activated. By default it is set to false .
                                b.      Pcd.Pl.WriteProtectCause  describes the reason that write-protect mode is activated. This information appears in the log files.
           3.       Deactivate write-protect mode by entering false  as the value for Pcd.Pl.WriteProtectActivated .
           4.      C lick Update and then click Save .
    A confirmation dialog box opens.
           5.       To apply the changes to all cluster elements, click Yes .
           6.       To reset the default values, click the Reset Default Global Properties icon .
    This will deactivate the write protect mode.
    Thanks and Regards,
    Syam.

  • API0259: The object cannot be edited in Read-Only mode!

    All,
    I'm getting the following error when trying to import an MDL file into my repository:
    API0259: The object cannot be edited in Read-Only mode!
    Does anyone know what this relates to?

    Hmmmm, sounds like it is hanging up on a conflict with the configuration name from your source repository and the configuration names in your target. Not sure that I have time to try and replicate that on my own system today.
    What I might suggest you try is to, on your source, set the project configuration back to the standard "DEFAULT_CONFIGURATION", get your module configured to use it, and re-export the mapping. Then you can fix your configuration back to where it should be.
    Do the same re-configuration on the target prior to import and see if that resolves the problem.
    Now, clearly this is not optimal and it would be really nice to find out WHY the conflict is occurring, but it would at least get this mapping imported for now.
    Mike
    And Vader, it is not that I don't have full faith that Oracle always raises the correct error message for a problem..... but, well, I've USED Oracle for too many years not to consider the possibility.
    Case in point in OWB, try putting an invalid value into the OWB-supplied WB_Date_From_Julian function
    e.g. select WB_Date_From_Julian(-1) from dual;
    10:55:12 Error: ORA-21000: error number argument to raise_application_error of -1854 is out of range
    ORA-06512: at "OWB_MGR.WB_DATE_FROM_JULIAN", line 7
    because some bright puppy at Oracle decided to try and raise an Oracle Built-in Error via raise_application_error instead of just using "raise", and - of course - the Oracle error code isn't within the allowable range.
    Error messages are nice, but you can't always trust 'em - which is why I look to expanded possibilities when neccessary.

  • Issue regarding open word file and read only mode using c# & MS-word interop

    i am programmatically open a word file for search and highlight keyword. my routine is working fine. the problem is when i am opening the file programmatically then a dialog come and ask me to open file in read only mode. the dialog look like below one
    actually i do not want to open the file in read only mode because people can open and like to change and save. so guide me what i can do to not to open the file in read only mode.
    here is my full code. just have a look and tell me what is wrong in my code or tell me any trick as a result i can open the file not in read only mode. here is my code.
    private void button1_Click(object sender, EventArgs e)
                object fileName = "";
                string filePath = "";
                string strSaveasPath = "";
                DialogResult result = openFileDialog1.ShowDialog();
                if (result == DialogResult.OK)
                    fileName = openFileDialog1.FileName;
                    //strSaveasPath = Path.GetDirectoryName(path.ToString());
                //fileName = "Z:\\C0000000003.doc";
                List<string> _list = new List<string>();
                _list.Add("tridip");
                _list.Add("arijit");
                //object fileName = "D:\\CVArchievePath\\C0000000001.doc";
                object textToFind = "test";
                object readOnly = false;
                Word.Application word = new Word.Application();
                Word.Document doc = new Word.Document();
                object missing = Type.Missing;
                try
                    doc = word.Documents.Open(ref fileName, ref missing, ref readOnly,
                                              ref missing,
    ref missing, ref missing,
                                              ref missing,
    ref missing, ref missing,
                                              ref missing,
    ref missing, ref missing,
                                              ref missing,
    ref missing, ref missing,
                                              ref missing);
                    doc.Activate();
                    object matchPhrase = false;
                    object matchCase = false;
                    object matchPrefix = false;
                    object matchSuffix = false;
                    object matchWholeWord = false;
                    object matchWildcards = false;
                    object matchSoundsLike = false;
                    object matchAllWordForms = false;
                    object matchByte = false;
                    object ignoreSpace = false;
                    object ignorePunct = false;
                    object highlightedColor = Word.WdColor.wdColorGreen;
                    object textColor = Word.WdColor.wdColorLightOrange;
                    object missingp = false;
                    Word.Range range = doc.Range();
                    foreach (string line in _list)
                        textToFind = line;
                        bool highlighted = range.Find.HitHighlight(ref textToFind,
    ref missing,
    ref missing,
    ref missing,
    ref missing,
    ref missing,
    ref missing,
    ref missing,
    ref missing,
    ref missing,
    ref missing,
    ref missing,
    ref missing,
    ref missing,
    ref missing,
    ref missing,
    ref missing,
    ref missing,
    ref missing,
    ref missing);
                    System.Diagnostics.Process.Start(fileName.ToString());
                catch (Exception ex)
                    Console.WriteLine("Error : " + ex.Message);
                    //Console.ReadKey(true);
                finally
                    //doc.Close(missing, missing, missing);
                    if(doc!=null)
                        System.Runtime.InteropServices.Marshal.ReleaseComObject(doc);
                    if (word != null)
                        System.Runtime.InteropServices.Marshal.ReleaseComObject(word);
                    word = null;
                    doc = null;
                    GC.Collect();
                    GC.WaitForPendingFinalizers();

    I know it's a very old issue and I reached to this page looking for a solution. Finally, I have found a fix to this problem.
    The problem is that we create an instance of Word and do not close it correctly. This makes program believe that the file is already open and hence you're getting the respective message of file being locked by you.
    Set the visibility of your application to true and then when you close it both file and instance should close and you will not get the problem again.

  • Query faild against database that is opened in read only mode

    ORA-16000: database open for read-only access
    Hi ,
    I am quering against a database that been opened in read only mode (10g version)
    SQL> select controlfile_type,open_mode,database_role from v$database;
    CONTROLFILE_TYPE OPEN_MODE DATABASE_ROLE
    STANDBY READ ONLY PHYSICAL STANDBY
    Currently when selecting against this database
    i am getting the following error:
    SELECT PS_RF_PROVGRP_VW.SETID, PS_RF_PROVGRP_VW.PROVIDER_GRP_ID, PS_RF_PROVGRP_VW.NAME1,
    PS_RF_PROVGRP_VW.STATUS, PS_RF_PROVGRP_VW.SYNCID, PS_RF_PROVGRP_VW.SYNCDTTM
    FROM PS_RF_PROVGRP_VW
    ERROR at line 1:
    ORA-00604: error occurred at recursive SQL level 1
    ORA-16000: database open for read-only access
    The owner of the object is PSSYS and i am running the queries as user INFORMIX.
    select owner,object_name,object_type from dba_objects where object_name ='PS_RF_PROVGRP_VW';
    OWNER OBJECT_NAME OBJECT_TYPE
    INFORMIX PS_RF_PROVGRP_VW SYNONYM
    PSSYS PS_RF_PROVGRP_VW VIEW
    User informix have "SELECT ANY TABLE" privilage
    In the source database (e.g: not the cloning one) the queries results are returning susseccfully ,
    and only in the clonning the database the problem exists.
    Does someone have an idea what the problem could be ?
    Thanks.

    Hi
    Object can become invalid, if the underlying objects are dropped/invalidated.
    So even if you create or validate the underlying objects these objects by themself do not become valid. You have to either make them valid or you should use it atleast one time as select/desc or any other query so that Oracle implicitly make it valid.
    Your source datatabase has valid synonym because after dropping/creating you must have selected that synonym atleast one, but this selection procedure would be after you copied your data to the target database.
    Regards

  • ALV: columns in read-only mode look like editable columns in edit mode

    Hi,
    My application contains an ALV table which should be toggled between display and edit mode like the rest of the fields.
    The evident solution was to use
    if_salv_wd_table_settings~set_read_only( abap_true or abap_false)
    However, unlike the rest of the fields, when the application changes into display mode and the fields get grey like in any SAP application, the columns in the table which were editable remain white, and those which were not editable and thus grey, get now white, too, instead of the other way round. So it will look to the normal user, as if now all columns would be editable!
    Of course, he would realize that they are not when he tries to edit them, but this is irritating.
    See following link with screenshots (only active for 3 weeks from now on):
    [Link to my webmail space/SDN: .|https://businesswebmail.telekom.at/filestorage/MzYxMTk1OTMx/]
    I have looked
    through my books ("Einstieg in Web Dynpro for ABAP", "Praxisbuch Webdynpro for ABAP", ...)
    through the wiki for Webdynpro for ABAP here in SDN as well as through this forum (by searching with "ALV edit")
    through the notes in BC-WD-CMP-ALV
    but could not find any solution. Most tables in those PDF articles found here in the WD4A wiki also show white cells although they are probabliy in read-only mode (e.g. the imitation of the SE16N browser article).
    The attributes to the LO_CELL_EDITOR for both Inputfields and textview columns contain exactly the same values when toggling between display and edit mode (read-only in table settings), so also no chance to change here anything.
    Also changing the cell design is not a solution as there is no design that looks like grey for not editable according to WDUI_TABLE_CELL_DESIGN  ([SAP Help - WDUI_TABLE_CELL_DESIGN|http://help.sap.com/saphelp_nw2004s/helpdata/en/56/5e9041d3c72e7be10000000a1550b0/frameset.htm].
    I do not know if I have made an error, as this is my 3rd Web Dynpro (after the first 2 of the introduction book), or SAP is really inconsistent in User interface between "normal" fields and ALV table fields.
    Can you please help me?
    Thanks in advance,
    Erlend

    Hi,
    In my application aslo, i have 30 columns out of which 10 are input fields. But, i'm showing the table as ABAP_TRUE incase of Non-editable otherwise to abap_false. Now i'm getting everything as in WHITE cells.
    Do you want to show it is Grey mode with Non-editable feature. Is that so.
    How many columns are there which has Input fields.
    Get the column references.
    Now, based on the mode of display create the object as Input or Textview field.
    For that column -
    If mode eq 'D'.
    Create an object for Textview(cl_salv_wd_uie_text_view)
    else.
    Create an Object for Inputfield(cl_salv_wd_uie_input_field)
    endif.
    The Append row is a standard button or custom one on ALV toolbar.
    Do you want to hide the toolbar or just disable these buttons.
    If you want to hide the toolbar then refer my wiki -
    http://wiki.sdn.sap.com/wiki/display/WDABAP/NullreferenceforUPDATETOOLBARerrorsofALVinthewebdynpro+ABAP
    Regards,
    Lekha.
    Edited by: Lekha on Sep 30, 2009 8:06 PM

  • Team Calendar in Read-Only Mode in Leave Request Approver Screen

    Hi,
      After lots of interaction and inputs in my previous thread,
      Customization Done for 2 level approval of leave in ESS but Facing Problems
           Our Team had decided to make the Team Calendar in Leave Request Approval Screen in Read-Only Mode (more precisely modus=TeamView)
           My question is, is it possible to achieve the same, because instead of adding custom validations using Custom RFC, If it is possible to make the Team Calendar as Read-Only than it will help us to achieve our goals. Please do let us know that is it possible? and, if Yes, How to achieve it?
          On leave request approval screen, we want Approver to take any action via "Show Worklist" and No User Action allowed on Team Calendar (Disabled but not InVisible).
      Thanks,
    Regards,
    Tushar Shinde.

    This is the note 1484853 but as i said you cant see it unless you raise a Message for SAP , We have to add yout company to the note.
    these are the steps
    Symptom
    In LeaveRequestApprover application, a higher level manager can
    approve/reject a leave though he/she is not the owner of the approval
    workitem (TS12300097). It happens when a higher level manager clicks on
    the leave in the TeamCalendar launched from the LeaveRequestApprover
    application.
    Other terms
    LeaveRequestApprover, TS12300097, prepare_select, WorkList,
    LPT_ARQ_REQUEST_UIAF07
    Reason and Prerequisites
    Reason:- This is caused because the approve/reject button were not
    restricted based on the logged in user.
    Prerequisites:- IT105 entries for the backend PERNRs should be correctly
    maintained.
    You can check here
    Object REPS LPT_ARQ_REQUEST_UIAF07
    Object Header FUGR PT_ARQ_REQUEST_UIA
    FORM PREPARE_SELECT
    the note is meant for few customers only

  • My Finder is opening folders in Read-Only Mode.

    When I click on Finder. A folder is opening in read only mode. When I open any folders in it, then a new window is opened again in read only mode.
    Just the "New Finder Window" is having this problem.
    Please help me out with my problem. I want the Finder to open windows normally rather than in read only modes.

    Problems such as yours are sometimes caused by files that should belong to you but are locked or have wrong permissions. This procedure will check for such files. It makes no changes and therefore will not, in itself, solve your problem.
    First, empty the Trash.
    Triple-click the line below to select it, then copy the selected text to the Clipboard (command-C):
    find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 -o -acl \) 2> /dev/null | wc -l
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
    The output of this command, on a line directly below what you entered, will be a number such as "41." Please post it in a reply.

  • Launch Adobe Reader for Android via Intent in Read-Only mode

    One issue I've bumped into recently with respect to launching Adobe Reader for Android via an ACTION_VIEW intent is that fillable forms can apparently always be filled and saved, thus modifying the original file.  That may be wonderful in many applications, but I have a situation where I would really not like users to be able to make any changes to the document (i.e. filling in fields and saving) at the current time.
    I am assuming that there is currently no Intent option to open a PDF in Adobe Reader in true read-only mode (preferably such that fillable fields wouldn't even be fillable).
    For now, I'll probably just have to point to a copy of the file, but it would be more convenient to have a handful of properly-documented options for launching read-only via an Intent.

    GoodReader ($4.99), ezPDF Reader ($2.99) and PDF Expert ($9.99) are well rated and support many more features.
    Here a link for your reference: http://indesignsecrets.com/for-interactive-pdf-not-all-readers-are-equal.php

  • Read-Only view object won't give me it's row

    Hi,
    I have a read only view object which when executed has one row in it, but the next method returns null.
    this is my code in the AM:
        public Row getPerson() {
            Row row = null;
            ViewObject vo = getPersonsView1();
            vo.setNamedWhereClauseParam("p_login_id", getUserPrincipalName());
            vo.executeQuery();
            System.out.println("rows:" + vo.getEstimatedRowCount());
            if (vo.hasNext())
               row = vo.next();
            return row;  
        }and the console log:
    06/09/15 10:37:57 [513] select person_id,
    login_id,
    orig_system_id,
    person_type,
    title,
    preferred_name,
    preferred_name ||' '||surname full_name,
    first_name,
    other_names,
    surname,
    phone_work,
    email_address
    from sys_persons
    where person_type = 'Staff'
    and login_id = :p_login_id
    06/09/15 10:37:57 [514] Bind params for ViewObject: PersonsView1
    06/09/15 10:37:57 [515] Binding null of type 12 for "p_login_id"
    06/09/15 10:37:57 [516] *** DCDataControl.sync() called from :DCBindingContainer.refresh
    06/09/15 10:37:57 [517] *** DCDataControl.sync() called from :DCBindingContainer.refresh
    06/09/15 10:37:57 [518] **** refreshControl() for BindingContainer :rft_ConsolePageDef
    06/09/15 10:37:57 [519] *** DCDataControl.sync() called from :DCBindingContainer.refresh
    06/09/15 10:37:57 [520] *** DCDataControl.sync() called from :DCBindingContainer.refresh
    06/09/15 10:38:00 [521] Column count: 12
    06/09/15 10:38:00 [522] ViewObject: PersonsView1 Reusing defined prepared Statement
    06/09/15 10:38:00 [523] Bind params for ViewObject: PersonsView1
    06/09/15 10:38:00 [524] Binding param "p_login_id": banstey
    06/09/15 10:38:00 rows:1
    Source breakpoint occurred at line 38 of SystemServiceImpl.java.Note above System.out.println("rows:" + vo.getEstimatedRowCount()); returns:
    06/09/15 10:38:00 rows:1
    but when i debug with a break point in the above method if (vo.hasNext()) returns false.
    I have tried doing row = vo.next(); without the if statement, but row still evaluates to null.
    The VO returns one record in the BC4J tester and I have this exact method and VO defined in another project and it works there. Tearing my hair out with this one...
    Brenden

    try RowSetIterator instead,
    RowSetIterator it = vo.createRowSetIterator("myIt");
    if(it.hasNext())
    MyVORowImpl row = (MyVORowImpl)it.next()
    //don't forget close the RowSetIterator
    I guess you use the VO.next(), but the current row of the VO is the one you get from db, and his next is null...

  • Shuttle issue when in read only mode

    version: Application Express 3.2.0.00.27
    I have created a shuttle based on an LOV. It displays the correct values on the left.
    select party_name d, party_id r
    from tbl_parties
    order by 1The right side is populated as a source from a function that returns the ID delimited by a colon(ID1:ID2).
    When in edit mode(not read only). The shuttle functions and displays correctly. In readonly mode however what is displayed is only the ids and not the description.
    The description of each value(id) is displayed correctly in edit mode.
    I also tried using a sql query instead of a function as the source. When I do that, the description is displayed but just one record(even though more then one should return). This is in read only mode. In edit more nothing returns.
    Source for the sql is
    Select party_name d , ':' , p.party_id r
    from tbl_authorization_parties a, tbl_parties p
    where a.party_id = p.party_id
    and a.authid = :P14_AUTHIDalso tried:
    Select party_name d ,  p.party_id r
    from tbl_authorization_parties a, tbl_parties p
    where a.party_id = p.party_id
    and a.authid = :P14_AUTHIDWith sql as a source in edit mode nothing is displayed on the right side.

    Hi ashalon,
    have you checked APEX 4.1, because I think in the most current version this is not the case anymore. You can test 4.1 on apex.oracle.com.
    Regards
    Patrick
    My Blog: http://www.inside-oracle-apex.com
    APEX Plug-Ins: http://apex.oracle.com/plugins
    Twitter: http://www.twitter.com/patrickwolf

  • How Real Time Apply works while physical standby is open in Read Only mode

    Hi,
    With Active data guard option, we can open physical standby DB in read only mode, while redo log are being applied. (Real Time Query)
    Standby Redo log (SRL) enables Real Time Apply (with "USING CURRENT LOGFILE" clause in recover database command on standby DB)
    I am interested to know, how Real Time Query works ?
    What is the mechanism with allows us to open physical standby DB in read only mode while redo logs are being applied continuously ?
    Regards,
    Sujit

    Dear user7419391,
    That is a new feature in Oracle Database 11g. MRP can use the real time apply in 10g but the concept here is different.
    Taken from the following document;
    http://www.ascent.co.za/documents/oracle/Oracle%20databse%2011g%20Active-Data-Guard%20datasheet.pdf
    *Unique Advantages of Oracle Active Data Guard*
    +Active Data Guard is an evolution of Data Guard technology, providing unique+
    +performance advantages while leveraging all other enhancements included in Oracle+
    +Data Guard 11g. For example, any Data Guard 11g physical standby database can+
    +be easily converted to a Snapshot Standby. A Snapshot Standby is open read-write+
    +and is ideally suited as a test system, able to process transactions independent of the+
    +primary database. A Snapshot Standby maintains protection by continuing to receive+
    +data from the production database, archiving it for later use. When tests are+
    +complete, a single command discards changes made while open read-write and+
    +quickly resynchronizes the standby database with the primary.+
    The other link in the previous post is excellent and you really have to read it to understand the active data guard aspects.
    Regards.
    Ogan

  • SP2013 and Project 2013 - project files open in read-only mode with no options to edit only Save As

    Hi all,
    Environment:
    SharePoint 2013 (15.0.4420.1017)  RTM
    Windows 8 - Project 2013 (15.0.4433.1506) 32Bit
    Issue details:
    When opening .mpp files stored within SharePoint they are opened successfully within Project 2013 however they are opened in Read-Only mode with no options to edit/check out only Save As.  The
    same outcome is experienced if you click the document link within SharePoint or you chose to edit from the document menu. 
    Opening the file through windows explorer also opens only in read-only mode.
    To date we’ve tested the following
    Windows 7 – Office 2010 = working as expected
    Windows 8 – Office 2010 = working as expected
    Windows 7 – Office 2013 = opening as read only, no prompt to edit
    Windows 8 – Office 2013 – opening as read only, no prompt to edit
    Current thinking is that it is an issue with either the SharePoint Office Documents Class ActiveX control or Project 2013 itself interacting with SharePoint 2013.
    We have tested this in multiple SP2013 environments with the same outcomes.
    The workaround therefore is to save locally and then upload again which is not ideal.
    Unable to find an exact issue match to this.
    Any help with this appreciated.

    Hi Dan,
    For us after investigating this further it was found that using the document menu to edit or checkout and then edit results in the project file being opened in read-only mode. 
    The same issue was present for Visio files.
    Using the FILES ribbon menu results in the document being opened in edit mode successfully in both Project and Visio.
    Please note that we found that this issue only exists within document libraries where checkout is required to edit which was our case.  If checkout is not required the document
    menu can also be used as expected.
    Cheers,
    Dan

Maybe you are looking for

  • Mail crashes on opening since 10.6.5 update

    Hi all - hoping you can help. Earlier today, I applied the 10.6.5 update and since then Mail crashes when I try to start it up. First, I tried downloading the 10.6.5 update and applying that afresh. I've also tried deleting com.apple.mail.plist to no

  • Is there a script for renaming layers in ID CS5?

    Hello, I am new to scripting (I just started today) so far I have found some very useful existing scripts to help automate my workflow. I am wondering if anyone knows of the existence of a layer renaming script for InDesign. I have seen similar scrip

  • Was the Smudge Tool Changed?

    In Photoshop CS5 and under, the smudge tool at 100% Strength would drag pixels without smudging/blurring/mixing, creating this cool painting effect. Customizing the smudge tool with a bit of a textured brush shape and some scattering, with 100% smudg

  • ESXi 4 Solaris 10 Install Internet problems

    Hi, I am fairly new to solaris. I am looking into ZFS and decided to bring up a machine on my ESXi box to test. The install goes great, as do the vmware tools. I am able to ping dns and IP internal and external. However when i attempt to browse to a

  • What are the .jpx properties in JBuilder ?

    Hello, Following a problem concerning the application server name to externalize (to be more flexible) posted here: http://forum.java.sun.com/thread.jsp?forum=13&thread=562952 I am wondering what are the JBuilder properties .jpx, when are they used?