Read Only Threads
I find it quite annoying the large number of read only threads in this forum particularly as, to my mind, very few of them are of any use. I've suggested over in the Idea's Bank that they could at least be reorganised into fewer threads without the loss of any information.
It would be nice to have more of our FAQs as read only topics too wouldn't it? Questions that frequently pop up at the moment that I think could use an official response are:
iPlayer rollout - if we haven't yet got it, when can we expect to have it by?
Multi-room / multiple vboxes - will it ever be supported, if so when?
Freeview HD - will we get it, if so when?
I'm a new customer getting a C03 error - why? how do I get it resolved?
I'm getting V04 errors - why? how do I get it resolved?
I've heard about YouView - when's it coming and how does this effect Vision customers?
Solved!
Go to Solution.
Thanks for the suggestions and feedback guys.
I've combined some of the sticky threads so there aren't so many at the top, and i'll take a look at your suggestions for the common FAQs around iPlayer, Freeview HD etc with the Vision team. Agree these will be useful updates for most of you, and i'ill look to get some info posted on these too.
Thx
Kerry
Retired BTCare Community Manager - StephanieG and SeanD are your new Community Managers
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.
Similar Messages
-
So some moderator made my other thread read only
I am getting crappy DSL service after 8 years of being able to steadily get 1.3 Mbps on my 1.5 service. Now I am lucky to get 0.8 Mbps and not get disconnected 10 times a day and have to off/on my modem. Here is what all I have tried:
Called customer support 4 months ago and jumped thru all their hoops. Restarted modem, removed/reinstalled cables, swapped ends of cables, changed out cables, virus scanned computer with mine, their, and then a different virus scanner of mine. I'm now using Microsoft's virus protection and running Windows XP. I also got a new modem to replace my 10 year old Westell, the new one is a Westell 7500, did not help switching modems.
I've used a Netgear router for years but to make sure it was not a problem I've connected my PC directly to the Westell 7500, no difference. I've unplugged all the phones in the house so that only the modem was connected, rebooted everything, no help. Yes, every phone has a filter.
Verizon customer service, from India it sounds like, always wants me to jump thru the same hoops on every call because all they know is to read from a script. Today's call was pretty much my last straw with Verizon if I can't get some help. They told me to call billing and request the 1.0 service because the 1.5 Mbps service that I've had at this location is not available at this location and that the slower service would solve my problems. I posted my Transciever Statistics on the other thread, below is a ping test that I just ran.Usually when they make threads read-only, it's because they've copied it to the private support area. Have you gotten any messages from the moderator that made the change? You should be able to reach your messages via the link next to the envelope icon on the upper right-hand side of the page.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
"All knowledge is worth having." -
Need thread safe way to access read-only objects
I have been working on a lot of projects and all the developers agree that they want thread safe code when called by many threads. It's rare developers are making statement like: "Data are not corrupted often so don't bother" or "It's not thread safe, but that will not often create issues".
In TopLink client session itself is thread safe but not the persistent object themselves. Via client session, if you want thread safe access you need to put a lock on CacheKey and it's not a public/supported API. So the only thread safe access is via unit of work.
We would like fast access to objects. We have a batch process that just need read-only access to objects. We need to read via unit of work to get thread safe access. But we just need the clone when we read via unit of work, we don't need the backup for change detection.
However, TopLink doesn't have a mean to do that.
Please push implementation of Bug5998333[WANT THREAD SAFE AND CORRECT ISOLATION WITH OBJECTS FROM ADDREADONLYCLASS]
In Hibernate, by design, all access are always thread safe. Accessing read-only object just create one copy (a clone), no backup needed.
Oracle claims that TopLink is fast. I wonder if their performance testing code is thread safe, so access objects via unit of work or they take the shortcut of accessing objects from client session. Also, reliable performance comparison should use conform in unit of work.As you stated the UnitOfWork offers you your desired functionality, you would just like an improvement in performance.
In TopLink 10.1.3 (or 11g preview) you have a few options:
- Use a UnitOfWork an live with the slight overhead of the back copies (it will only add 5-30 % overhead to your processing)
- Instead use an isolated client session, this will not require any cloning or backup clones, but also does not allow any caching.
- Use change tracking, TopLink added attribute-level change tracking in 10.1.3, when used the UnitOfWork does not create backup clones. In 10.1.3 it was mainly used for CMP and requires code generation, but you could implement or weave the code yourself. In TopLink 11g, change tracking is weaved by default with JPA and the weaver can also be used with POJO objects.
I agree that having a feature to mark an object as transactionally read-only would be desirable, it seems like you have logged the enhancement. You could try escalting the enhancement through Oracle support, but since it is an enhancement and not a bug, it is probably beyond what support offers. You may wish to investigate services, or potentially join the open source Eclipse EclipseLink project which the next version of TopLink is being developed under and take part in the feature yourself. -
I am a group exercise instructor and rely heavily on my playlists. My old phone is an iphone 4s and I just bought an Iphone 6. I also have a macbook where I keep my itunes account, but I create all my playlists on my phone. I need to transfer those playlists from my old iphone into itunes in my computer so that I can then add them to my new iphone 6. However, none of the playlists on my iphone appear when I connect to my macbook. I have read other threads where the suggestion was to attach the old phone to itunes, find the phone in itunes and click the little arrow to the left to show the playlists. Then right click on the playlist and export it, saving it to the desktop, to then import it into itunes. However, in my case, the playlists do not show up when the phone is connected to itunes. I have clicked on the little arrow and all I get is "music", "purchased", etc., but none of my playlists. I'm sure some years back I probably deleted something in my itunes library and now none of my playlists show. Please help me. I would hate to have to recreate all of my playlists. Thank you!
I know it sounds weird, and that is the reason I posted my question. Because my case is not like all the ones I've found online and it's confusing. I added a screen capture of my itunes with my old iphone (the one that houses my playlists) connected to it.
My playlists "ARE" in my iphone 4s. They are still there even though they do not show up when I plug in to itunes in my computer.
When connecting my phone to itunes on my macbook, the playlists do not appear anywhere in itunes. I have found my connected iphone icon, I have clicked on the arrow next to it and it does pull up the standard lists that come with the iphone/itunes: Music, Movies, TV shows, books. That's it! below that is "Genius" and below "Geniuns" is "PLAYLISTS" but the only playlist of mine that shows there is one that I created several years back titled "90's music" and that one I created it on my computer, not my phone. Under "90's music" there are also other standard playlists that itunes automatically adds.
Does anyone else have this issue or know how to get around this. I am starting to think that I am going to have to recreate these lists on my computer -
Read-only file access from network volume
I get an read-only file access from network volume problem while sharing a drive from Snow Leopard to a Tiger install. Most of files were opening well, but *.fp7 (FileMaker) and *.xls (Excel) files won't open dealing with a read-only error.
As descibed in the last post of http://discussions.apple.com/thread.jspa?threadID=1406977 the client have the same share name of the server. Renomming it resolved the error!
Thanks!right then, as it looks like I'm talking to myself....
I have just wiped clean the Macbook Pro.
I installed Leopard from scratch, then installed Office 2008.
Logged back onto the network share, and the read-only error came up again, ONLY in Excel.
bugger.
Did the same thing with my Macbook and all is fine.
Copy the file to the local hard drive, opens ok.
I then copied the file to another Mac on the network.
mmmm, opens fine.
what's the difference....
mmmm, the machine it opens fine from is running 10.4
the machine which hosts all the data is running 10.3.9
could this be the problem.
Just done a software update check on the 10.3 machine and there are some security updates that need doing.
Going to run that now and see what happens, otherwise I think the iMac running 10.3.9 is going to need to come up to 10.4 and fingers crossed this will solve it. -
I got my MacBook Pro 4 years ago and its getting really slow.
After reading dome threads on this site i downloaded Etrecheck and here are the results.
Any help would be greatly appreciated.
EtreCheck version: 2.1.8 (121)
Report generated 21 March 2015 9:41:28 PM AEDT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
MacBook Pro (15-inch, Mid 2010) (Technical Specifications)
MacBook Pro - model: MacBookPro6,2
1 2.4 GHz Intel Core i5 CPU: 2-core
4 GB RAM
BANK 0/DIMM0
2 GB DDR3 1067 MHz ok
BANK 1/DIMM0
2 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Battery Health: Normal - Cycle count 814
Video Information: ℹ️
NVIDIA GeForce GT 330M - VRAM: 256 MB
Color LCD 1440 x 900
spdisplays_display_connector
Intel HD Graphics - VRAM: 288 MB
spdisplays_display_connector
System Software: ℹ️
Mac OS X 10.6.8 (10K549) - Time since boot: one day 2:7:40
Disk Information: ℹ️
TOSHIBA MK3255GSXF disk0 : (298.09 GB)
- (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 319.73 GB (150.44 GB free)
MATSHITADVD-R UJ-898
USB Information: ℹ️
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Internal Memory Card Reader
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Apple Inc. Built-in iSight
Configuration files: ℹ️
/etc/hosts - Count: 31
Kernel Extensions: ℹ️
/Library/Application Support/MacKeeper/AntiVirus.app
[not loaded] com.zeobit.kext.AVKauth (2.3.3 - SDK 10.8) [Click for support]
[not loaded] com.zeobit.kext.Firewall (2.3.3 - SDK 10.8) [Click for support]
/System/Library/Extensions
[not loaded] com.devguru.driver.SamsungComposite (1.2.63 - SDK 10.6) [Click for support]
[not loaded] com.leapfrog.codeless.kext (2) [Click for support]
[not loaded] com.leapfrog.driver.LfConnectDriver (1.11.1 - SDK 10.10) [Click for support]
[not loaded] com.wibu.codemeter.CmUSBMassStorage (1.0.7) [Click for support]
/System/Library/Extensions/ssuddrv.kext/Contents/PlugIns
[not loaded] com.devguru.driver.SamsungACMControl (1.2.63 - SDK 10.6) [Click for support]
[not loaded] com.devguru.driver.SamsungACMData (1.2.63 - SDK 10.6) [Click for support]
[not loaded] com.devguru.driver.SamsungMTP (1.2.63 - SDK 10.5) [Click for support]
[not loaded] com.devguru.driver.SamsungSerial (1.2.63 - SDK 10.6) [Click for support]
Problem System Launch Daemons: ℹ️
[running] com.wibu.CodeMeter.Server.plist [Click for support]
[not loaded] org.samba.winbindd.plist [Click for support]
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[loaded] com.adobe.CS5ServiceManager.plist [Click for support]
[loaded] com.google.keystone.agent.plist [Click for support]
[running] com.hp.devicemonitor.plist [Click for support]
[loaded] com.hp.messagecenter.launcher.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[loaded] com.adobe.SwitchBoard.plist [Click for support]
[loaded] com.google.keystone.daemon.plist [Click for support]
[loaded] com.leapfrog.connect.authdaemon.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
[loaded] com.skype.skypeinstaller.plist [Click for support]
[running] com.zeobit.MacKeeper.AntiVirus.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[loaded] com.adobe.ARM.[...].plist [Click for support]
[loaded] com.adobe.ARM.[...].plist [Click for support]
[running] com.akamai.single-user-client.plist [Click for support]
[failed] com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist [Click for details]
[running] com.leapfrog.connect.monitor.plist [Click for support]
[running] com.spotify.webhelper.plist [Click for support]
[failed] com.zeobit.MacKeeper.Helper.plist [Click for support] [Click for details]
User Login Items: ℹ️
LOGINserver Application (/Library/Printers/Brother/Utilities/Server/LOGINserver.app)
InstUtilLaunch Application (/Library/Printers/Brother/Utilities/InstallUtility.app/Contents/Resources/Inst UtilLaunch.app)
Internet Plug-ins: ℹ️
o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Click for support]
OVSHelper: Version: 1.1 [Click for support]
OfficeLiveBrowserPlugin: Version: 12.2.9 [Click for support]
net.juniper.DSSafariExtensions: Version: Unknown [Click for support]
Silverlight: Version: 4.0.60129.0 [Click for support]
FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
DivXBrowserPlugin: Version: 2.1 [Click for support]
Flash Player: Version: 16.0.0.305 - SDK 10.6 Outdated! Update
iPhotoPhotocast: Version: 7.0 - SDK 10.7
googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Click for support]
QuickTime Plugin: Version: 7.6.6
AdobePDFViewer: Version: 10.0.3 [Click for support]
SharePointBrowserPlugin: Version: 14.0.0 [Click for support]
JavaAppletPlugin: Version: 13.9.8 - SDK 10.6 Check version
Safari Extensions: ℹ️
Searchme [Adware! - Remove]
DivX Plus Web Player HTML5 <video>
Audio Plug-ins: ℹ️
iSightAudio: Version: 7.6.6
3rd Party Preference Panes: ℹ️
Akamai NetSession Preferences [Click for support]
CodeMeter [Click for support]
DivX [Click for support]
Flash Player [Click for support]
Growl [Click for support]
Time Machine: ℹ️
Time Machine information requires OS X 10.7 "Lion" or later.
Top Processes by CPU: ℹ️
14% firefox
5% WindowServer
0% ps
0% fontd
0% DirectoryService
Top Processes by Memory: ℹ️
528 MB firefox
176 MB Finder
159 MB AntiVirus
112 MB WindowServer
82 MB mds
Virtual Memory Information: ℹ️
1.07 GB Free RAM
1.29 GB Active RAM
1.01 GB Inactive RAM
784 MB Wired RAM
962 MB Page-ins
3 MB Page-outs
Diagnostics Information: ℹ️
Mar 20, 2015, 07:32:46 PM Self test - passedHardware Information: ℹ️
MacBook Pro (15-inch, Mid 2010) (Technical Specifications)
MacBook Pro - model: MacBookPro6,2
1 2.4 GHz Intel Core i5 CPU: 2-core
4 GB RAM
BANK 0/DIMM0
2 GB DDR3 1067 MHz ok
BANK 1/DIMM0
2 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Battery Health: Normal - Cycle count 814
***Hardware looks fine
***Increasing the RAM can always help with slowness issues
Video Information: ℹ️
NVIDIA GeForce GT 330M - VRAM: 256 MB
Color LCD 1440 x 900
spdisplays_display_connector
Intel HD Graphics - VRAM: 288 MB
spdisplays_display_connector
***Looks fine
System Software: ℹ️
Mac OS X 10.6.8 (10K549) - Time since boot: one day 2:7:40
***You are running an Operating system over 4 years old but it shouldn't effect the speed of your computer
Disk Information: ℹ️
TOSHIBA MK3255GSXF disk0 : (298.09 GB)
- (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 319.73 GB (150.44 GB free)
MATSHITADVD-R UJ-898
***Looks fine
USB Information: ℹ️
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Internal Memory Card Reader
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Apple Inc. Built-in iSight
Configuration files: ℹ️
/etc/hosts - Count: 31
***Looks fine
Kernel Extensions: ℹ️
/Library/Application Support/MacKeeper/AntiVirus.app
[not loaded] com.zeobit.kext.AVKauth (2.3.3 - SDK 10.8) [Click for support]
[not loaded] com.zeobit.kext.Firewall (2.3.3 - SDK 10.8) [Click for support]
/System/Library/Extensions
[not loaded] com.devguru.driver.SamsungComposite (1.2.63 - SDK 10.6) [Click for support]
[not loaded] com.leapfrog.codeless.kext (2) [Click for support]
[not loaded] com.leapfrog.driver.LfConnectDriver (1.11.1 - SDK 10.10) [Click for support]
[not loaded] com.wibu.codemeter.CmUSBMassStorage (1.0.7) [Click for support]
/System/Library/Extensions/ssuddrv.kext/Contents/PlugIns
[not loaded] com.devguru.driver.SamsungACMControl (1.2.63 - SDK 10.6) [Click for support]
[not loaded] com.devguru.driver.SamsungACMData (1.2.63 - SDK 10.6) [Click for support]
[not loaded] com.devguru.driver.SamsungMTP (1.2.63 - SDK 10.5) [Click for support]
[not loaded] com.devguru.driver.SamsungSerial (1.2.63 - SDK 10.6) [Click for support]
***I'm honestly not super familiar with most kernal extensions but I do see you have MacKeeper running which can slow the computer down
****** This next section talks about Launch agents and Launch Daemons.
****Something to keep in mind is that when you first get the computer that all of these folders are empty and the files in them are all third party.
****If you want to see if the system runs better without them Shut the computer down and turn it on while holding the shift key
****This will put the computer into safemode which turns off third party files and extensions and does not let any launch agent/daemons files run.
Problem System Launch Daemons: ℹ️
[running] com.wibu.CodeMeter.Server.plist [Click for support]
[not loaded] org.samba.winbindd.plist [Click for support]
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[loaded] com.adobe.CS5ServiceManager.plist [Click for support]
[loaded] com.google.keystone.agent.plist [Click for support]
[running] com.hp.devicemonitor.plist [Click for support]
[loaded] com.hp.messagecenter.launcher.plist [Click for support]
***This is the root launch agent folder
***I'd remove all but the first three
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[loaded] com.adobe.SwitchBoard.plist [Click for support]
[loaded] com.google.keystone.daemon.plist [Click for support]
[loaded] com.leapfrog.connect.authdaemon.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
[loaded] com.skype.skypeinstaller.plist [Click for support]
[running] com.zeobit.MacKeeper.AntiVirus.plist [Click for support]
***This is the root Launch Daemons folder
***I'd only keep com.adobe.fpsaud.plist and com.microsfot.office.licensing.helper.plist all the others will reinstall them selves if needed.
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[loaded] com.adobe.ARM.[...].plist [Click for support]
[loaded] com.adobe.ARM.[...].plist [Click for support]
[running] com.akamai.single-user-client.plist [Click for support]
[failed] com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist [Click for details]
[running] com.leapfrog.connect.monitor.plist [Click for support]
[running] com.spotify.webhelper.plist [Click for support]
[failed] com.zeobit.MacKeeper.Helper.plist [Click for support] [Click for details]
***This is your users Launch Agent folder
***I'd remove everything here
User Login Items: ℹ️
LOGINserver Application (/Library/Printers/Brother/Utilities/Server/LOGINserver.app)
InstUtilLaunch Application (/Library/Printers/Brother/Utilities/InstallUtility.app/Contents/Resources/Inst UtilLaunch.app)
Internet Plug-ins: ℹ️
o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Click for support]
OVSHelper: Version: 1.1 [Click for support]
OfficeLiveBrowserPlugin: Version: 12.2.9 [Click for support]
net.juniper.DSSafariExtensions: Version: Unknown [Click for support]
Silverlight: Version: 4.0.60129.0 [Click for support]
FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
DivXBrowserPlugin: Version: 2.1 [Click for support]
Flash Player: Version: 16.0.0.305 - SDK 10.6 Outdated! Update
iPhotoPhotocast: Version: 7.0 - SDK 10.7
googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Click for support]
QuickTime Plugin: Version: 7.6.6
AdobePDFViewer: Version: 10.0.3 [Click for support]
SharePointBrowserPlugin: Version: 14.0.0 [Click for support]
JavaAppletPlugin: Version: 13.9.8 - SDK 10.6 Check version
Safari Extensions: ℹ️
Searchme [Adware! - Remove]
DivX Plus Web Player HTML5 <video>
***The first extension in safari is adware and can be uninstalled
***The second one is a video web player and you could probably remove that as well but it wont effect your speed
Audio Plug-ins: ℹ️
iSightAudio: Version: 7.6.6
3rd Party Preference Panes: ℹ️
Akamai NetSession Preferences [Click for support]
CodeMeter [Click for support]
DivX [Click for support]
Flash Player [Click for support]
Growl [Click for support]
Time Machine: ℹ️
Time Machine information requires OS X 10.7 "Lion" or later.
Top Processes by CPU: ℹ️
14% firefox
5% WindowServer
0% ps
0% fontd
0% DirectoryService
Top Processes by Memory: ℹ️
528 MB firefox
176 MB Finder
159 MB AntiVirus
112 MB WindowServer
82 MB mds
Virtual Memory Information: ℹ️
1.07 GB Free RAM
1.29 GB Active RAM
1.01 GB Inactive RAM
784 MB Wired RAM
962 MB Page-ins
3 MB Page-outs
Diagnostics Information: ℹ️
Mar 20, 2015, 07:32:46 PM Self test - passed
***Everything else seems fine -
Read-Only SD Card(s) - used to be able to read/write
Hello all,
I have searched teh forum and found a few similar threads but I believe my case is different.
For all 3 of my SD cards, they appear as read-only in my MBP (running 10.6.8), whether I connect them via the built-in card reader or via my camera (Panasonic GF1) hooked up to my MBP via USB.
I used to be able to import photos into iPhoto and then delete them from the card but this does not work any more (I do not even get prompted any more) as the card(s) is now read-only (Get Info tells me "Sharing & Permissions: You can only read"). Indeed if I try to delete, drag and drop a file onto it or even erase from disk utility, it will not let me.
Now, most threads dealing with this issue point to the card reader being faulty (or even the lock switch being in the wrong position). I am fairly sure this is not the case here as:
1) the behaviour occurs both through the built-in card-reader and the camera connection and
2) the camera does not "think" that the card is read-only, it can take new pictures, delete or format the card (note that I tried to "lock" the card with the switch and in that case the camera complains and cannot do anything with the card).
Moreover this occurs with all three cards.
On the other hand, my IPhone connected via USB is not locked to "read-only" (for example IPhoto asks me and does delete photos after import).
Thanks very much for any help on this - this is very puzzling!If you are using a DSLR camera, like for example a Canon 60D, there may be an option to use a "Low-Level Formatting" on the card. This should make it writable when putting it into the computer.
To test this (and confirm it works) I did the following:
Hardware Used:
Canon 60D camera body
Sandisk 32GB SDHC Extreme Card
Macbook Pro 15" (mid 2010 model) with built-in SD card slot.
Steps:
Place SDHC card into camera (SD card may work as well). Navigate through menu until you arrive at settings that allow the camera to format the card. There may be an option to format it "low-level", which you would then select.
-Note that all files on card will be erased permanently.-
After the camera formats, eject the card from the camera, and place inside the built-in SD slot on the Macbook.
The card should automatically mount, containing both read and write priviledges.
Hope that helps.
~Charlie~
Owner/Founder HotTips! LLC
http://hottipscentral.com -
How can I get a birthday reminder from items which are in the read-only cal
I am looking for a solution to get a reminder message for birtdays which are within the read-only calender imported/updated from he address book. I so far have not found the option where to turn on the reminder and I do not want to duplicate items (ie creating another birthday calender inside iCal).
Thanks for comments.
PB G4 Ti, 1GHz, 10.2.8 Mac OS X (10.4.7)Hi ontour,
This limitation is one of the many reasons I wrote Dates to iCal. It is a replacement for the Birthdays calendar in iCal, so you would need to turn the Birthdays calendar off in iCal's preferences.
See here: http://discussions.apple.com/thread.jspa?threadID=466478
Best wishes
John M -
Unable to open the physical standby in read only (10g)
Hi,
I m trying to create physical standby using RMAN to another server . But at the last step when trying to test Real Time Apply i m unable to open the standby in read only mode.Can Anyone please let me know whats the issue and how to resolve it
SQL> select status from v$instance;
STATUS
MOUNTED
SQL> alter database recover managed standby database using current logfile disconnect from session;
Database altered.
SQL> alter database recover managed standby database cancel;
Database altered.
SQL> alter database open read only;
alter database open read only
ERROR at line 1:
ORA-16004: backup database requires recovery
ORA-01152: file 1 was not restored from a sufficiently old backup
ORA-01110: data file 1:
'/u01/app/oracle/product/10.2.0/oradata/test1/system.dbf'Hi,
This is a newly created standby. I created just now. Below the o/p requested
In Primary
SQL> set line 200
SQL> set pagesize 200
SQL> col message format a90
SQL> select severity, error_code, to_char(timestamp,'DD-MON-YYYY HH24:MI:SS'), message from v$dataguard_status where dest_id=2;
SEVERITY ERROR_CODE TO_CHAR(TIMESTAMP,'D MESSAGE
Error 12541 04-MAR-2012 11:55:05 PING[ARC1]: Heartbeat failed to connect to standby 'test1'. Error is 12541.
Error 12541 04-MAR-2012 12:00:12 PING[ARC1]: Heartbeat failed to connect to standby 'test1'. Error is 12541.
Error 1034 04-MAR-2012 12:06:25 PING[ARC1]: Heartbeat failed to connect to standby 'test1'. Error is 1034.
Warning 3113 04-MAR-2012 13:21:24 ARC1: Attempting destination LOG_ARCHIVE_DEST_2 network reconnect (3113)
Warning 3113 04-MAR-2012 13:21:24 ARC1: Destination LOG_ARCHIVE_DEST_2 network reconnect abandoned
Error 3113 04-MAR-2012 13:21:24 PING[ARC1]: Error 3113 when pinging standby test1.
Warning 3113 04-MAR-2012 13:33:29 ARC1: Attempting destination LOG_ARCHIVE_DEST_2 network reconnect (3113)
Warning 3113 04-MAR-2012 13:33:29 ARC1: Destination LOG_ARCHIVE_DEST_2 network reconnect abandoned
Error 3113 04-MAR-2012 13:33:29 PING[ARC1]: Error 3113 when pinging standby test1.
Error 1034 04-MAR-2012 13:39:50 PING[ARC1]: Heartbeat failed to connect to standby 'test1'. Error is 1034.
Error 1034 04-MAR-2012 13:45:29 PING[ARC1]: Heartbeat failed to connect to standby 'test1'. Error is 1034.
Warning 3113 04-MAR-2012 13:57:56 ARC1: Attempting destination LOG_ARCHIVE_DEST_2 network reconnect (3113)
Warning 3113 04-MAR-2012 13:57:56 ARC1: Destination LOG_ARCHIVE_DEST_2 network reconnect abandoned
Error 3113 04-MAR-2012 13:57:56 PING[ARC1]: Error 3113 when pinging standby test1.
14 rows selected.
SQL> select ds.dest_id id
, ad.status
, ds.database_mode db_mode
, ad.archiver type
, ds.recovery_mode
, ds.protection_mode
, ds.standby_logfile_count "SRLs"
, ds.standby_logfile_active active
, ds.archived_seq#
from v$archive_dest_status ds
, v$archive_dest ad
where ds.dest_id = ad.dest_id
and ad.status != 'INACTIVE'
order by
ds.dest_id
/ 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
ID STATUS DB_MODE TYPE RECOVERY_MODE PROTECTION_MODE SRLs ACTIVE ARCHIVED_SEQ#
1 VALID OPEN ARCH IDLE MAXIMUM PERFORMANCE 0 0 64
2 VALID UNKNOWN ARCH UNKNOWN MAXIMUM PERFORMANCE 3 0 64In standby
SQL> select thread#,max(sequence#) from v$archived_log where applied='YES' group by thread#;
THREAD# MAX(SEQUENCE#)
1 64
SQL> select thread#,max(sequence#) from v$archived_log group by thread#;
THREAD# MAX(SEQUENCE#)
1 64
SQL> select message from v$dataguard_status;
MESSAGE
ARC0: Archival started
ARC1: Archival started
ARC1: Becoming the 'no FAL' ARCH
ARC1: Becoming the 'no SRL' ARCH
ARC0: Becoming the heartbeat ARCH
Attempt to start background Managed Standby Recovery process
MRP0: Background Managed Standby Recovery process started
Managed Standby Recovery starting Real Time Apply
Media Recovery Waiting for thread 1 sequence 63
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
MESSAGE
RFS[1]: Assigned to RFS process 9880
RFS[1]: Identified database type as 'physical standby'
Media Recovery Log /u01/app/oracle/product/10.2.0/archive/test1/1_63_776981781.arc
Media Recovery Log /u01/app/oracle/product/10.2.0/archive/test1/1_64_776981781.arc
Media Recovery Waiting for thread 1 sequence 65
16 rows selected. -
Team Calendar in Read-Only Mode in Leave Request Approver Screen
Hi,
After lots of interaction and inputs in my previous thread,
Customization Done for 2 level approval of leave in ESS but Facing Problems
Our Team had decided to make the Team Calendar in Leave Request Approval Screen in Read-Only Mode (more precisely modus=TeamView)
My question is, is it possible to achieve the same, because instead of adding custom validations using Custom RFC, If it is possible to make the Team Calendar as Read-Only than it will help us to achieve our goals. Please do let us know that is it possible? and, if Yes, How to achieve it?
On leave request approval screen, we want Approver to take any action via "Show Worklist" and No User Action allowed on Team Calendar (Disabled but not InVisible).
Thanks,
Regards,
Tushar Shinde.This is the note 1484853 but as i said you cant see it unless you raise a Message for SAP , We have to add yout company to the note.
these are the steps
Symptom
In LeaveRequestApprover application, a higher level manager can
approve/reject a leave though he/she is not the owner of the approval
workitem (TS12300097). It happens when a higher level manager clicks on
the leave in the TeamCalendar launched from the LeaveRequestApprover
application.
Other terms
LeaveRequestApprover, TS12300097, prepare_select, WorkList,
LPT_ARQ_REQUEST_UIAF07
Reason and Prerequisites
Reason:- This is caused because the approve/reject button were not
restricted based on the logged in user.
Prerequisites:- IT105 entries for the backend PERNRs should be correctly
maintained.
You can check here
Object REPS LPT_ARQ_REQUEST_UIAF07
Object Header FUGR PT_ARQ_REQUEST_UIA
FORM PREPARE_SELECT
the note is meant for few customers only -
Hello, I hope the experts here can advise me on which development approach for a new .net web application that I am to begin development shortly. I have the back end stored procedures complete and now I will build a .net front end.
This front end will be 95% populating custom html5/css3/jquery pages from c# DataSets which are themselves populated from calls to oracle stored procesures. There will be no updating - this is read-only querries of OLTP prpared tables off of a data
warehouse schema. I am a verteran at the back end stuff but my web app development skills are new so I hope to get a recommendation form the experts on what approach I should persue to build the front end. From what I have seen I might start
with MVC5 framework and build the web pages with RAZOR embedded c# code looping through the DataSets to create the html. I need to the ability to create very custom div elements throughout, so I understand I should not use some high level code generation
tool. Thanks so much for the feedback.Hello Jay,
This forum is discuss and ask questions about the C# programming language, IDE, libraries, samples, and tools.
>>I hope the experts here can advise me on which development approach for a new .net web application.
From this message, you are doing web applications, you will need to post this thread to Asp.Net forum for some advices. For MVC issues, please post
Here. Thanks for your understanding.
Have a nice day!
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
HELP- "IPOD Cant Be Synced. The Disk is locked" Cant remove Read only
I cannot remove read only from the IPod Control folder. It won't let me. I cant load music to my ipod, which I previously have with same computer, itunes, everything. I have the most updated itunes, software, etc.
Can anyone help me? I have no clue what to do. I tried to right click on the ipod disk and run an error check. that didnt work. I'm clueless. Help!Hello Mark,
And welcome to Apple Discussions!
I don't really have any suggestions for you, but I can point you to an older thread where you might find help. Check out this old post from another forum member who managed to address this issue him/herself.
http://discussions.apple.com/thread.jspa?threadID=1651418
B-rock -
Edit, read only, disable, blur items. Which to use?
I've searched the forum and have found some threads that somewhat discuss my question, but none have addressed it specifically.
I have a page that has 20 or so items on it. There are 3 fields (like status) that determine which items may be edited, so whether these items may be edited or not will change from row to row.
As I've stated I've searched on the words disable, etc. and have some ideas on how to best handle this process. For one, I don't want to use disable. But, I'm new to ApEx and don't know the best route to take. Should I use the ReadOnly setting on the item and code using PL/SQL? Or, should I handle it in JavaScript and check the status, etc. there and blur the item?
I want to do this the best way, because I want all of our future apps to use the same concept. And, I want to use a concept that will run efficiently.
Thanks in advance for your response.
TonyI have done this several different ways and have found that it has been best to utlilize pl/sql from the Read-Only using "pl/sql function body returning a boolean". From the read-only, we call a package that handles all the READ-ONLY checks (we put the call into every field by default).<br><br>
Then all we have to do is pass in the current page number and the userID and the package determines whether or not that user is credentialed to view the items on the page item by item.<br><br>
For your example, you could pass the values of the fields on the screen and get your boolean result back for read-only. The advantage to the pl/sql returning boolean is that you can impact the whole application by changing the package that does the credential checking, as opposed to creating and editing page specific javascript for all pages where you want to protect fields. -
Read only user in weblogic throwing error messages in logs
Hi,
We have a requirement to create a read only user with monitor access.
our requirement is to monitor em console using moniotr user, i.e. this user will login to em console, monitor order flow from instances tab by entering order no. and dates, and logout from em console.
we have done below steps to create monitor user,
Admin Console->Security Realms >myrealm >Users and Groups-> new
created user Monitor_User_1 and assigned group as Monitors.
but whenever this user logs in or searches we are getting below error message:
<Sep 15, 2013 7:25:21 PM EST> <Warning> <oracle.jps.admin> <BEA-000000> <Access denied. Required roles: Operator, Admin, executing subject: principals=[Monitor_User_1, Monitors]
java.lang.SecurityException: Access denied. Required roles: Operator, Admin, executing subject: principals=[Monitor_User_1, Monitors]
we even did below steps:
With admin access login into EM Console. Select soa_infra, right click mouse -> Security -> Application Roles. On right side, click green arrow and see list of Roles shown. Select the role named SOAMonitors, click on this. And add a Monitor_User_1 to this.
but we are still getting same error.
Kindly let us know if we are missing something while creating monitor user and how to get rid of these messages.
Please note that we are already in Production and our log files are filled with these messages.
Thanks & Regards,
Vivek Vishalmoving this discussion to WebLogic Server - General thread.
-
One of my Parabola installations has started to always mount the / partition read-only. I've booted into a different install on the same machine, and can mount the affected partition without problems. I've done a fsck, and run the SMART disk checks. No problems. I've touched /forcefsck so a file system check is done every time I boot, but still the partition is read-only when it finishes booting.
This is the output of 'mount':
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
sys on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
dev on /dev type devtmpfs (rw,nosuid,relatime,size=1024388k,nr_inodes=256097,mode=755)
run on /run type tmpfs (rw,nosuid,nodev,relatime,mode=755)
/dev/sdb10 on / type ext4 (ro,relatime,data=ordered)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,relatime)
/dev/sdb9 on /boot type ext4 (rw,relatime,data=ordered)
/dev/sdb1 on /media/Stuff type fuseblk (rw,nosuid,nodev,noexec,relatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096)
binfmt on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,relatime)
This is the output of 'dmesg':
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.6.3-1-LIBRE (nobody@root) (gcc version 4.7.2 (GCC) ) #1 SMP PREEMPT Tue Oct 23 00:29:01 UYST 2012
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux-libre root=UUID=f0206707-f1ca-4bea-9eb3-c5d3713e4a4e ro resume=UUID=5b4248ba-30c3-48e5-a090-3a9c9f49d9c4 quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ff8ffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007ff90000-0x000000007ff9dfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007ff9e000-0x000000007ffcffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007ffd0000-0x000000007ffddfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007ffe0000-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: System manufacturer System Product Name/P5KPL-CM, BIOS 0702 08/27/2010
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x7ff90 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-protect
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x7ff8ffff]
[ 0.000000] [mem 0x00000000-0x7fdfffff] page 2M
[ 0.000000] [mem 0x7fe00000-0x7ff8ffff] page 4k
[ 0.000000] kernel direct mapping tables up to 0x7ff8ffff @ [mem 0x1fbfd000-0x1fffffff]
[ 0.000000] RAMDISK: [mem 0x37a10000-0x37cfffff]
[ 0.000000] ACPI: RSDP 00000000000fb6a0 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 000000007ff90000 0003C (v01 A_M_I_ OEMRSDT 08001027 MSFT 00000097)
[ 0.000000] ACPI: FACP 000000007ff90200 00084 (v02 A_M_I_ OEMFACP 08001027 MSFT 00000097)
[ 0.000000] ACPI: DSDT 000000007ff905c0 07BFA (v01 A0968 A0968000 00000000 INTL 20060113)
[ 0.000000] ACPI: FACS 000000007ff9e000 00040
[ 0.000000] ACPI: APIC 000000007ff90390 0006C (v01 A_M_I_ OEMAPIC 08001027 MSFT 00000097)
[ 0.000000] ACPI: MCFG 000000007ff90400 0003C (v01 A_M_I_ OEMMCFG 08001027 MSFT 00000097)
[ 0.000000] ACPI: OEMB 000000007ff9e040 00080 (v01 A_M_I_ AMI_OEM 08001027 MSFT 00000097)
[ 0.000000] ACPI: HPET 000000007ff981c0 00038 (v01 A_M_I_ OEMHPET 08001027 MSFT 00000097)
[ 0.000000] ACPI: GSCI 000000007ff9e0c0 02024 (v01 A_M_I_ GMCHSCI 08001027 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000007ff8ffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x7ff8ffff]
[ 0.000000] NODE_DATA [mem 0x7ff8c000-0x7ff8ffff]
[ 0.000000] [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007d600000-ffff88007f5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x7ff8ffff]
[ 0.000000] On node 0 totalpages: 524063
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3913 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 8127 pages used for memmap
[ 0.000000] DMA32 zone: 511953 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] e820: [mem 0x80000000-0xfedfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88007fc00000 s84608 r8192 d21888 u524288
[ 0.000000] pcpu-alloc: s84608 r8192 d21888 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 515866
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-libre root=UUID=f0206707-f1ca-4bea-9eb3-c5d3713e4a4e ro resume=UUID=5b4248ba-30c3-48e5-a090-3a9c9f49d9c4 quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 2048780k/2096704k available (4726k kernel code, 452k absent, 47472k reserved, 4144k data, 772k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[ 0.000000] NR_IRQS:4352 nr_irqs:712 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 8388608 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1613.131 MHz processor
[ 0.003338] Calibrating delay loop (skipped), value calculated using timer frequency.. 3227.68 BogoMIPS (lpj=5377103)
[ 0.003342] pid_max: default: 32768 minimum: 301
[ 0.003391] Security Framework initialized
[ 0.003397] AppArmor: AppArmor disabled by boot time parameter
[ 0.003643] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.004961] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.005580] Mount-cache hash table entries: 256
[ 0.005927] Initializing cgroup subsys cpuacct
[ 0.005933] Initializing cgroup subsys memory
[ 0.005946] Initializing cgroup subsys devices
[ 0.005949] Initializing cgroup subsys freezer
[ 0.005951] Initializing cgroup subsys net_cls
[ 0.005953] Initializing cgroup subsys blkio
[ 0.005995] CPU: Physical Processor ID: 0
[ 0.005998] CPU: Processor Core ID: 0
[ 0.006000] mce: CPU supports 6 MCE banks
[ 0.006010] CPU0: Thermal monitoring enabled (TM2)
[ 0.006015] process: using mwait in idle threads
[ 0.006021] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
tlb_flushall_shift is 0xffffffff
[ 0.008169] ACPI: Core revision 20120711
[ 0.013350] ftrace: allocating 18348 entries in 72 pages
[ 0.026962] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.059974] smpboot: CPU0: Intel(R) Celeron(R) CPU E1200 @ 1.60GHz stepping 0d
[ 0.059996] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.059996] perf_event_intel: PEBS disabled due to CPU errata
[ 0.059996] ... version: 2
[ 0.059996] ... bit width: 40
[ 0.059996] ... generic registers: 2
[ 0.059996] ... value mask: 000000ffffffffff
[ 0.059996] ... max period: 000000007fffffff
[ 0.059996] ... fixed-purpose events: 3
[ 0.059996] ... event mask: 0000000700000003
[ 0.083501] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.096681] smpboot: Booting Node 0, Processors #1
[ 0.109825] Brought up 2 CPUs
[ 0.109825] smpboot: Total of 2 processors activated (6455.37 BogoMIPS)
[ 0.110104] devtmpfs: initialized
[ 0.112186] PM: Registering ACPI NVS region [mem 0x7ff9e000-0x7ffcffff] (204800 bytes)
[ 0.112186] NET: Registered protocol family 16
[ 0.112186] ACPI: bus type pci registered
[ 0.112186] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.112186] PCI: not using MMCONFIG
[ 0.112186] PCI: Using configuration type 1 for base access
[ 0.113367] bio: create slab <bio-0> at 0
[ 0.113401] ACPI: Added _OSI(Module Device)
[ 0.113401] ACPI: Added _OSI(Processor Device)
[ 0.113401] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.113401] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.114233] ACPI: EC: Look up EC in DSDT
[ 0.116040] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.122816] ACPI: SSDT 000000007ffa00f0 001D2 (v01 AMI CPU1PM 00000001 INTL 20060113)
[ 0.122816] ACPI: Dynamic OEM Table Load:
[ 0.122816] ACPI: SSDT (null) 001D2 (v01 AMI CPU1PM 00000001 INTL 20060113)
[ 0.122816] ACPI: SSDT 000000007ffa02d0 00143 (v01 AMI CPU2PM 00000001 INTL 20060113)
[ 0.122816] ACPI: Dynamic OEM Table Load:
[ 0.122816] ACPI: SSDT (null) 00143 (v01 AMI CPU2PM 00000001 INTL 20060113)
[ 0.122816] ACPI: Interpreter enabled
[ 0.122816] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.122816] ACPI: Using IOAPIC for interrupt routing
[ 0.122816] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.122816] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in ACPI motherboard resources
[ 0.136077] ACPI: No dock devices found.
[ 0.136086] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.136182] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.136328] pci_root PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.136382] PCI host bridge to bus 0000:00
[ 0.136387] pci_bus 0000:00: busn_res: [bus 00-ff] is inserted under domain [bus 00-ff]
[ 0.136390] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.136394] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.136397] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.136400] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.136403] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[ 0.136406] pci_bus 0000:00: root bus resource [mem 0x80000000-0xffffffff]
[ 0.136420] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
[ 0.136478] pci 0000:00:01.0: [8086:29c1] type 01 class 0x060400
[ 0.136533] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.136587] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[ 0.136606] pci 0000:00:1b.0: reg 10: [mem 0xfe9fc000-0xfe9fffff 64bit]
[ 0.136697] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.136723] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[ 0.136803] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.136831] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[ 0.136910] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.136941] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[ 0.136986] pci 0000:00:1d.0: reg 20: [io 0xc480-0xc49f]
[ 0.137022] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[ 0.137067] pci 0000:00:1d.1: reg 20: [io 0xc800-0xc81f]
[ 0.137108] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[ 0.137153] pci 0000:00:1d.2: reg 20: [io 0xc880-0xc89f]
[ 0.137190] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[ 0.137235] pci 0000:00:1d.3: reg 20: [io 0xcc00-0xcc1f]
[ 0.137282] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[ 0.137304] pci 0000:00:1d.7: reg 10: [mem 0xfe9fbc00-0xfe9fbfff]
[ 0.137395] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.137419] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.137491] pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100
[ 0.137581] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[ 0.137630] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
[ 0.137645] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
[ 0.137656] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
[ 0.137667] pci 0000:00:1f.1: reg 18: [io 0x08f0-0x08f7]
[ 0.137678] pci 0000:00:1f.1: reg 1c: [io 0x08f8-0x08fb]
[ 0.137689] pci 0000:00:1f.1: reg 20: [io 0xffa0-0xffaf]
[ 0.137730] pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018f
[ 0.137747] pci 0000:00:1f.2: reg 10: [io 0xc400-0xc407]
[ 0.137757] pci 0000:00:1f.2: reg 14: [io 0xc080-0xc083]
[ 0.137767] pci 0000:00:1f.2: reg 18: [io 0xc000-0xc007]
[ 0.137777] pci 0000:00:1f.2: reg 1c: [io 0xbc00-0xbc03]
[ 0.137786] pci 0000:00:1f.2: reg 20: [io 0xb880-0xb88f]
[ 0.137827] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.137845] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[ 0.137901] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
[ 0.137974] pci_bus 0000:01: busn_res: [bus 01] is inserted under [bus 00-ff]
[ 0.137991] pci 0000:01:00.0: [1002:68f9] type 00 class 0x030000
[ 0.138008] pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.138021] pci 0000:01:00.0: reg 18: [mem 0xfeac0000-0xfeadffff 64bit]
[ 0.138031] pci 0000:01:00.0: reg 20: [io 0xd000-0xd0ff]
[ 0.138047] pci 0000:01:00.0: reg 30: [mem 0xfeaa0000-0xfeabffff pref]
[ 0.138085] pci 0000:01:00.0: supports D1 D2
[ 0.138109] pci 0000:01:00.1: [1002:aa68] type 00 class 0x040300
[ 0.138125] pci 0000:01:00.1: reg 10: [mem 0xfeafc000-0xfeafffff 64bit]
[ 0.138195] pci 0000:01:00.1: supports D1 D2
[ 0.138231] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.138236] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.138240] pci 0000:00:01.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.138246] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.138291] pci_bus 0000:03: busn_res: [bus 03] is inserted under [bus 00-ff]
[ 0.138295] pci 0000:00:1c.0: PCI bridge to [bus 03]
[ 0.138347] pci_bus 0000:02: busn_res: [bus 02] is inserted under [bus 00-ff]
[ 0.138372] pci 0000:02:00.0: [1969:1026] type 00 class 0x020000
[ 0.138398] pci 0000:02:00.0: reg 10: [mem 0xfebc0000-0xfebfffff 64bit]
[ 0.138412] pci 0000:02:00.0: reg 18: [io 0xec00-0xec7f]
[ 0.138519] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.138544] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.138555] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.138560] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
[ 0.138565] pci 0000:00:1c.1: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.138595] pci_bus 0000:04: busn_res: [bus 04] is inserted under [bus 00-ff]
[ 0.138642] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
[ 0.138654] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.138657] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.138660] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.138663] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.138666] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xffffffff] (subtractive decode)
[ 0.138689] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.138794] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.138867] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.138903] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[ 0.138963] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.138967] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.145009] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.145073] ACPI: PCI Interrupt Link [LNKB] (IRQs *10)
[ 0.145128] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 11 12 14 15)
[ 0.145187] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.145246] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.145306] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.145365] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.145425] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 11 12 14 15)
[ 0.146698] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.146703] vgaarb: loaded
[ 0.146705] vgaarb: bridge control possible 0000:01:00.0
[ 0.146775] PCI: Using ACPI for IRQ routing
[ 0.147301] PCI: pci_cache_line_size set to 64 bytes
[ 0.147387] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.147389] e820: reserve RAM buffer [mem 0x7ff90000-0x7fffffff]
[ 0.147545] NetLabel: Initializing
[ 0.147548] NetLabel: domain hash size = 128
[ 0.147550] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.147571] NetLabel: unlabeled traffic allowed by default
[ 0.147588] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.147593] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.147599] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.166686] Switching to clocksource hpet
[ 0.177018] pnp: PnP ACPI init
[ 0.177044] ACPI: bus type pnp registered
[ 0.177174] pnp 00:00: [bus 00-ff]
[ 0.177179] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.177182] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.177186] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.177189] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.177192] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.177195] pnp 00:00: [mem 0x80000000-0xffffffff window]
[ 0.177279] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.177295] pnp 00:01: [mem 0xfed14000-0xfed19fff]
[ 0.177363] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.177369] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.177419] pnp 00:02: [dma 4]
[ 0.177423] pnp 00:02: [io 0x0000-0x000f]
[ 0.177426] pnp 00:02: [io 0x0081-0x0083]
[ 0.177429] pnp 00:02: [io 0x0087]
[ 0.177431] pnp 00:02: [io 0x0089-0x008b]
[ 0.177434] pnp 00:02: [io 0x008f]
[ 0.177437] pnp 00:02: [io 0x00c0-0x00df]
[ 0.177478] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.177494] pnp 00:03: [io 0x0070-0x0071]
[ 0.177508] pnp 00:03: [irq 8]
[ 0.177544] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.177557] pnp 00:04: [io 0x0061]
[ 0.177595] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.177609] pnp 00:05: [io 0x00f0-0x00ff]
[ 0.177617] pnp 00:05: [irq 13]
[ 0.177654] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.178000] pnp 00:06: [irq 6]
[ 0.178004] pnp 00:06: [dma 2]
[ 0.178007] pnp 00:06: [io 0x03f0-0x03f5]
[ 0.178010] pnp 00:06: [io 0x03f7]
[ 0.178096] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.178501] pnp 00:07: [irq 7]
[ 0.178504] pnp 00:07: [dma 3]
[ 0.178508] pnp 00:07: [io 0x0378-0x037f]
[ 0.178511] pnp 00:07: [io 0x0778-0x077f]
[ 0.178686] pnp 00:07: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.178731] pnp 00:08: [io 0x0000-0xffffffffffffffff disabled]
[ 0.178735] pnp 00:08: [io 0x0000-0xffffffffffffffff disabled]
[ 0.178738] pnp 00:08: [io 0x0290-0x0297]
[ 0.178815] system 00:08: [io 0x0290-0x0297] has been reserved
[ 0.178821] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.178918] pnp 00:09: [io 0x0010-0x001f]
[ 0.178922] pnp 00:09: [io 0x0022-0x003f]
[ 0.178925] pnp 00:09: [io 0x0044-0x005f]
[ 0.178928] pnp 00:09: [io 0x0062-0x0063]
[ 0.178934] pnp 00:09: [io 0x0065-0x006f]
[ 0.178937] pnp 00:09: [io 0x0072-0x007f]
[ 0.178939] pnp 00:09: [io 0x0080]
[ 0.178942] pnp 00:09: [io 0x0084-0x0086]
[ 0.178945] pnp 00:09: [io 0x0088]
[ 0.178948] pnp 00:09: [io 0x008c-0x008e]
[ 0.178951] pnp 00:09: [io 0x0090-0x009f]
[ 0.178953] pnp 00:09: [io 0x00a2-0x00bf]
[ 0.178956] pnp 00:09: [io 0x00e0-0x00ef]
[ 0.178959] pnp 00:09: [io 0x04d0-0x04d1]
[ 0.178962] pnp 00:09: [io 0x0800-0x087f]
[ 0.178965] pnp 00:09: [io 0x0000-0xffffffffffffffff disabled]
[ 0.178968] pnp 00:09: [io 0x0480-0x04bf]
[ 0.178971] pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
[ 0.178974] pnp 00:09: [mem 0xfed20000-0xfed8ffff]
[ 0.179068] system 00:09: [io 0x04d0-0x04d1] has been reserved
[ 0.179072] system 00:09: [io 0x0800-0x087f] has been reserved
[ 0.179076] system 00:09: [io 0x0480-0x04bf] has been reserved
[ 0.179080] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.179083] system 00:09: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.179089] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.179173] pnp 00:0a: [mem 0xfed00000-0xfed003ff]
[ 0.179219] pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.179280] pnp 00:0b: [mem 0xffb00000-0xffbfffff]
[ 0.179284] pnp 00:0b: [mem 0xfff00000-0xffffffff]
[ 0.179332] pnp 00:0b: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.179387] pnp 00:0c: [mem 0xffc00000-0xffefffff]
[ 0.179460] system 00:0c: [mem 0xffc00000-0xffefffff] has been reserved
[ 0.179466] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.179524] pnp 00:0d: [mem 0xfec00000-0xfec00fff]
[ 0.179528] pnp 00:0d: [mem 0xfee00000-0xfee00fff]
[ 0.179608] system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.179612] system 00:0d: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.179617] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.179660] pnp 00:0e: [io 0x0060]
[ 0.179663] pnp 00:0e: [io 0x0064]
[ 0.179673] pnp 00:0e: [irq 1]
[ 0.179734] pnp 00:0e: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.179796] pnp 00:0f: [irq 12]
[ 0.179852] pnp 00:0f: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[ 0.180166] pnp 00:10: [irq 4]
[ 0.180170] pnp 00:10: [dma 0 disabled]
[ 0.180173] pnp 00:10: [io 0x03f8-0x03ff]
[ 0.180292] pnp 00:10: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.180342] pnp 00:11: [mem 0xf0000000-0xf3ffffff]
[ 0.180427] system 00:11: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.180433] system 00:11: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.180636] pnp 00:12: [mem 0x00000000-0x0009ffff]
[ 0.180640] pnp 00:12: [mem 0x000c0000-0x000cffff]
[ 0.180643] pnp 00:12: [mem 0x000e0000-0x000fffff]
[ 0.180646] pnp 00:12: [mem 0x00100000-0x7fffffff]
[ 0.180649] pnp 00:12: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.180743] system 00:12: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.180747] system 00:12: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.180751] system 00:12: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.180754] system 00:12: [mem 0x00100000-0x7fffffff] could not be reserved
[ 0.180760] system 00:12: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.180916] pnp: PnP ACPI: found 19 devices
[ 0.180919] ACPI: ACPI bus type pnp unregistered
[ 0.188605] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
[ 0.188613] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
[ 0.188617] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000
[ 0.188628] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 0.188646] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.188650] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.188653] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.188657] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.188664] pci 0000:00:1c.0: BAR 14: assigned [mem 0x80000000-0x801fffff]
[ 0.188668] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80200000-0x803fffff 64bit pref]
[ 0.188673] pci 0000:00:1c.1: BAR 15: assigned [mem 0x80400000-0x805fffff 64bit pref]
[ 0.188678] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.188683] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.188687] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.188693] pci 0000:00:01.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.188697] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.188703] pci 0000:00:1c.0: PCI bridge to [bus 03]
[ 0.188707] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.188713] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff]
[ 0.188718] pci 0000:00:1c.0: bridge window [mem 0x80200000-0x803fffff 64bit pref]
[ 0.188725] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.188729] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
[ 0.188735] pci 0000:00:1c.1: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.188740] pci 0000:00:1c.1: bridge window [mem 0x80400000-0x805fffff 64bit pref]
[ 0.188747] pci 0000:00:1e.0: PCI bridge to [bus 04]
[ 0.188784] pci 0000:00:1c.0: enabling device (0104 -> 0107)
[ 0.188805] pci 0000:00:1e.0: setting latency timer to 64
[ 0.188810] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.188814] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.188817] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.188820] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.188824] pci_bus 0000:00: resource 8 [mem 0x80000000-0xffffffff]
[ 0.188827] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.188830] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.188833] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.188836] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
[ 0.188840] pci_bus 0000:03: resource 1 [mem 0x80000000-0x801fffff]
[ 0.188843] pci_bus 0000:03: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
[ 0.188846] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.188849] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.188852] pci_bus 0000:02: resource 2 [mem 0x80400000-0x805fffff 64bit pref]
[ 0.188856] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 0.188859] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 0.188862] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.188865] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.188868] pci_bus 0000:04: resource 8 [mem 0x80000000-0xffffffff]
[ 0.188916] NET: Registered protocol family 2
[ 0.189551] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.192082] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.192686] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.192758] TCP: reno registered
[ 0.192773] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.192798] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.192949] NET: Registered protocol family 1
[ 0.193147] pci 0000:01:00.0: Boot video device
[ 0.193158] PCI: CLS 32 bytes, default 64
[ 0.193230] Unpacking initramfs...
[ 0.285578] Freeing initrd memory: 3008k freed
[ 0.287514] audit: initializing netlink socket (disabled)
[ 0.287533] type=2000 audit(1351450895.286:1): initialized
[ 0.303689] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.306261] VFS: Disk quotas dquot_6.5.2
[ 0.306342] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.306570] msgmni has been set to 4007
[ 0.306904] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.306951] io scheduler noop registered
[ 0.306955] io scheduler deadline registered
[ 0.307043] io scheduler cfq registered (default)
[ 0.307215] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.307324] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.307443] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[ 0.307659] intel_idle: does not run on family 6 model 15
[ 0.307698] GHES: HEST is not enabled!
[ 0.307788] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.328340] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.349279] 00:10: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.349579] Linux agpgart interface v0.103
[ 0.349708] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.352389] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.352444] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.352607] mousedev: PS/2 mouse device common for all mice
[ 0.352700] rtc_cmos 00:03: RTC can wake from S4
[ 0.352865] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.352896] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.352913] cpuidle: using governor ladder
[ 0.352915] cpuidle: using governor menu
[ 0.353088] drop_monitor: Initializing network drop monitor service
[ 0.353195] TCP: cubic registered
[ 0.353379] NET: Registered protocol family 10
[ 0.353609] NET: Registered protocol family 17
[ 0.353626] Key type dns_resolver registered
[ 0.353965] PM: Checking hibernation image partition UUID=5b4248ba-30c3-48e5-a090-3a9c9f49d9c4
[ 0.377050] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.398600] PM: Hibernation image not present or could not be loaded.
[ 0.398629] registered taskstats version 1
[ 0.399166] rtc_cmos 00:03: setting system clock to 2012-10-28 19:01:35 UTC (1351450895)
[ 0.400807] Freeing unused kernel memory: 772k freed
[ 0.401093] Write protecting the kernel read-only data: 8192k
[ 0.407007] Freeing unused kernel memory: 1408k freed
[ 0.410355] Freeing unused kernel memory: 652k freed
[ 0.424642] systemd-udevd[42]: starting version 194
[ 0.484567] ACPI: bus type usb registered
[ 0.484613] usbcore: registered new interface driver usbfs
[ 0.484629] usbcore: registered new interface driver hub
[ 0.484994] usbcore: registered new device driver usb
[ 0.485924] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.485981] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.485987] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.485997] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.489913] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.489922] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.489951] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe9fbc00
[ 0.493550] SCSI subsystem initialized
[ 0.496118] ACPI: bus type scsi registered
[ 0.496720] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.497003] hub 1-0:1.0: USB hub found
[ 0.497013] hub 1-0:1.0: 8 ports detected
[ 0.497923] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.497967] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.497972] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.497982] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.498020] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c480
[ 0.498143] libata version 3.00 loaded.
[ 0.499305] hub 2-0:1.0: USB hub found
[ 0.499317] hub 2-0:1.0: 2 ports detected
[ 0.499540] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.499547] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.499557] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.499610] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c800
[ 0.500253] hub 3-0:1.0: USB hub found
[ 0.500264] hub 3-0:1.0: 2 ports detected
[ 0.500442] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.500448] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.500463] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.500512] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c880
[ 0.500811] hub 4-0:1.0: USB hub found
[ 0.500822] hub 4-0:1.0: 2 ports detected
[ 0.501016] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.501022] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.501039] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.501090] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000cc00
[ 0.502169] hub 5-0:1.0: USB hub found
[ 0.502179] hub 5-0:1.0: 2 ports detected
[ 0.502422] ata_piix 0000:00:1f.1: version 2.13
[ 0.502499] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.503963] scsi0 : ata_piix
[ 0.504744] scsi1 : ata_piix
[ 0.505372] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 0.505378] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 0.505429] ata_piix 0000:00:1f.2: MAP [
[ 0.505431] P0 P2 P1 P3 ]
[ 0.505484] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.507566] scsi2 : ata_piix
[ 0.508975] scsi3 : ata_piix
[ 0.509624] ata3: SATA max UDMA/133 cmd 0xc400 ctl 0xc080 bmdma 0xb880 irq 19
[ 0.509630] ata4: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb888 irq 19
[ 0.684177] ata3.00: ATA-8: WDC WD6400AAKS-00A7B2, 01.03B01, max UDMA/133
[ 0.684184] ata3.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.691230] ata3.00: configured for UDMA/133
[ 0.691417] scsi 2:0:0:0: Direct-Access ATA WDC WD6400AAKS-0 01.0 PQ: 0 ANSI: 5
[ 0.699349] sd 2:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
[ 0.699463] sd 2:0:0:0: [sda] Write Protect is off
[ 0.699468] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.699516] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.774080] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 >
[ 0.775132] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.096765] usb 2-2: new low-speed USB device number 2 using uhci_hcd
[ 1.275214] usbcore: registered new interface driver usbhid
[ 1.275219] usbhid: USB HID core driver
[ 1.276959] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input1
[ 1.277358] hid-generic 0003:04B3:310C.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.0-2/input0
[ 1.290145] tsc: Refined TSC clocksource calibration: 1613.217 MHz
[ 1.290153] Switching to clocksource tsc
[ 1.426263] PM: Starting manual resume from disk
[ 1.426269] PM: Hibernation image partition 8:8 present
[ 1.426271] PM: Looking for hibernation image.
[ 1.426530] PM: Image not found (code -22)
[ 1.426535] PM: Hibernation image not present or could not be loaded.
[ 1.648559] EXT4-fs (sda10): mounted filesystem with ordered data mode. Opts: (null)
[ 12.388263] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
[ 12.459036] fuse init (API version 7.20)
[ 13.150864] Adding 1951860k swap on /dev/sda8. Priority:-1 extents:1 across:1951860k
[ 0.691798] ACPI: Invalid Power Resource to register!
[ 14.060519] synergys[417]: segfault at 0 ip 0000000000449fa9 sp 00007fff68a19a90 error 4
[ 14.060531] in synergys[400000+cb000]
(I disconnected the second hard drive in the machine to verify that it wasn't causing problems. Hence the sda / sdb discrepancy)
I've been able to mount the partitions and chroot into them, but I don't know what to do from here. Oddly, I've discovered that 'ls' doesn't output anything, although bash completion seems to work ok.
Any ideas on what I should do to get my system running again?
Thanks in advance,
BernieHave you read the forum rules? Asking for support for Parabola isn't going to get you very far.
https://wiki.archlinux.org/index.php/Fo … pport_ONLY
Maybe you are looking for
-
Data source CFMXBible.mdb could not be found.
Hello I am following the book CFMXBible and I got it set up. but in the beginning of the tutorial there is a form that is suppose to sent the contents of my form to the db. After I press the submit button, I get this error' What is wrong here? What s
-
I cannot Calibrate the Compass app on iOS7. How do I do it? Nothing moves on either the Compass or the Level.
-
My 2007 MacBook Pro keeps receiving "you must restart you computer" screen upon start up
It all started when i was watching videos online and the screen froze. It did this a couple more times and in between these freezes the computer would occasionally freeze during start up while the gray wheel was spinning. I was running lion. i decide
-
Intermittent problems playing/burning CDs
About every 3rd CD or so I try to play on my G5, I get a clicking noise and iTunes freezes up -- I can't play, eject, etc. I then have to force quit iTunes and then restart it (sometimes ejecting and reinserting the CD) and that works most of the tim
-
How to change mobile me to icloud on mac 10.6.8.
Have tried to change mobile me to icloud a few times. On my mac os x 10.6.8. is still mobile me on it. How can I exchange it?