Read PP master data in order
Hi...
I have one query reference to Read PP master data in order.
Can we read PP master data in the orders at plant level in mass processing?Or any other alternative...?
Regards
Tushar
Dear There is no T Code in standard SAP to read the PP master data in mass.
You need to develop a LSMW or BDC solution.
Please refer below thread for more information.
MASS read PP master data
Cheers
KK
Similar Messages
-
How track changes in production order which is already Read PP master data
Hi Gurus,
Due to some unavoidable reason my client has to do Read PP master data time and again, now my client having a requirement that want to see what has been changes in Production Order.
We already created 1 report for that which tracks whatever has been changed in Production Order but having a constraint in it. That It could not be able to distinguish to which order READ PP MASTER DATA done.
So my query is how to map that in report. As sytem Status directly changed to CRTD phase.
Any table which can track the changes once the order been through with READ PP MASTER DATA?
As there are huge number of Production Order so we can go and open each order to see the Status changes in each and every order.
Hope to get a reply soon.
Regards,
Sap UserHi,
A suggestion:
Change the specification as, log changes at each save instead of Read PP Master Data, as the changes would become effective only upon save. So if this is acceptable then 2 options, 1. Go with OCM feature or 2. Refer note - 390635
Revert if you face any issues.
Regards,
Vivek -
How to collective read PP master data in Production order?
Hi: Guys
Please tell me how to collective read PP master data in production orders. in COHV, I can find out some collective functions but read PP master data.
Thanks
HenryRead PP master data is only to update routing and BOM in production order if it is already created to effect the changesmade in routing and BOM. I think in that collective option is not possible.
Regards
KrishnamurthyDSS -
Error message when try to read PP Master data C2127
Hello All,
When we try to do the Read PP master data for the process order (1005911), system issues the error message. As below
Order 000001005911: Goods withdrawal carried out
Message no. C2127
Diagnosis
The BOM cannot be read in because goods withdrawals have already taken place.
Have any one came across this issue? we are using release 470.
thanks and regards,
ganeshHi,
The only thing I suspect is you must have reversed the goods movement with movement type 262 in MB1A or MIGO.
You havn't cancle the material documents which were posted at the time of GI.
So logistically it looks that the GI has been reversed but in the database it is having some different situation as those are not in one : one relation.
If it's so then to enable read PP master data, follow the steps,
Cancle all the material documents for movement type 262 with MBST or MIGO followed by cancellation of material documents with 261.
Make sure all the documents are cancelled.
Now try to read master data, system won't give you an error.
Hope this helps you.
SmanS -
Read PP Master Data in Background
Dear Expert,
is there any possiblity of Read PP Master Data in background when planned order converted into production order. or any background job we can run in background daily.
Regards,
DevDear,
You will have to develop a custom logic to automate the read PP master data transactionplease take help from technical consultant.
Also refer this thread,
Read PP master data
Regards,
R.Brahmankar -
"Error reading credit master data" in contract management in CRM 7.0
Hi All,
In CRM 2007,whenever we navigate to contract management screen,error message come which is "Error reading credit master data "
Any suggestion on how to solve this issue.
Regrads
NikhilHi All,
This is resolved.
Just set the entry in the table CRMV_CREDIT_GEN to 'Do not Display credit master data '
Regards -
Error: Reading Credit Master Data in IC
We are having trouble reading credit master date in the Collection Factsheet tab on the Navigation Bar of the IC. Does anyone have any ideas? Thanks.
Hi, we are facing the same issue. Were you able to solve it?
Thanks!
Marcelo -
"Error reading crrdit master data " error in Contract management(CRM 2007)
Hi All,
In CRM 2007,whenever we navigate to contract management screen,error message come which is "Error reading credit master data "
Any suggestion on how to solve this issue.
Regrads
NikhilHi All,
This is resolved.
Just set the entry in the table CRMV_CREDIT_GEN to 'Do not Display credit master data '
Regards
Ankit -
Read error when reading the master data of 0EMPLOYEE on demand, attribute 0
Hello All,
While loading data for HR data source 0HR_PA_OS_1 i am getting the below error message..
Error 1 in update.
Read error when reading the master data of 0EMPLOYEE on demand, attribute 0COMP_CODE
Please let me know how can it be resolved.
Regards
Rohit PartiThe problem occurs during data load from R/3. It was not occuring before. When I go to check the PSA contents I get a runtime error - GETWA_NOT_ASSIGNED.
Error analysis
You attempted to access an unassigned field symbol
(data segment 32821).
This error may occur if
- You address a typed field symbol before it has been set with
ASSIGN
- You address a field symbol that pointed to the line of an
internal table that was deleted
- You address a field symbol that was previously reset using
UNASSIGN or that pointed to a local field that no
longer exists
- You address a global function interface, although the
respective function module is not active - that is, is
not in the list of active calls. The list of active calls
can be taken from this short dump. -
Reading From Master data failure
I have enhanced 0VENDOR_ATTR with ZTERM field from LFM1 table and everything is working fine ...I have added ZPMNTTRMS as an attribute in 0VENDOR and loaded the data its working fine .But when I was using this ZPMNTTRMS in a DSO and say read from master data and took the source field as 0vendor ...then Iam not able to see the values for this info object...Ofcourse 0VENDOR is loading fine....Can any one let me know what is the issue here ? / Is there any routiene / some code needs to be written some where to get the ZPMNTTRMS values in DSO ...Please advice ASAP...
regardshi nw2004s,
have you performed change run ?
rsa1->tools->apply attribute/hierarchy change run (or RSATTR)
hope this helps. -
How to cusotmize the attribute of being mandatory for master data and order
Hi,everyone
how to make the un-mandatory field on the verdor master data mandatory?
Also, How to set to define my own mandatory fields on purchase order? I also need to remove the mandatory setting which is pre-set by the system on many docutments&master data.
How to fullfil them.
thank very muchhi
for vendor master
spro>Logistics - General>Business Partner>Vendor>Control>Define Account Groups and Field Selection (Vendor)
or code OMSG
material master
OMSR
Purchase Order
Go to SPRO > MM > Purchasing > Purchase Order > Define Document Types > here get the Field selection key for the PO Doc type
Now go to SPRO > MM > Purchasing > Purchase Order > Define Screen Layout at Document Level > Here the field selection key, under selection group "GR/IR control", mark "GR-based invoice verification" field as mandatory
hope it help
try asking the questions one by one
regards
kunal -
Master data to order copy control
While creating Sales order, when i give Sold to party, Customer data from Customer master wil be populated in the order. How can i control this data, i.e, How can i restrict this copy from master data .??
Eg. I am using some order type zor.. i dont want partner functions to come from customer master...Then where from system will get those data. In your example you have put that partner function should not be copied from the master data.
In the cutomer master, partner function tab , we maintain the relationship, like if A is the Sold-to Party, then B,C,D are ship-to-party, bill-to-party,payer respectively. You can maintain other partner function also if required.
If you are entering suppose cutomer F as the Ship-to-party for Customer A, then system will not accept , as customer F has not been defined as the ship-to-party for customer A in the master data.
If something else you want to do,you write some program with the help of ABAPer, but I am not sure about it.
Regards -
Transporting Master data & Attribute Order
Hi there,
is there an easy way to also transport all master data from Development (D) to Production (P)?
I only found a how-to paper for importing master data from the BW where BPC is running into BPC itself.
For small projects, opening the dimension sheet for a dimension on D in the admin client, copying all masterdata to an Excel file, opening the dimension sheet for the corresponding dimension on P (which is initially empty) and copying all the data there from the Excel file was the workaround. Is there a more sophisticated way to do this automatically?
One more thing: is it normal that the order of attributes in the dimension sheet for a dimension on D and the corresponding created dimension on P is not the same (the columns' order is not mantained)? Is there a way to have the same order on both systems?
Thanks for your help!Okay, I understand and I think I ran into this once before. What I did was choose one and test it out .... if it works, it works .... move on and forget. If it doesn't work, try the other one.
It should work with either because you are merely looking up 0MAINTPLANT from 0CS_DOC. You are choosing 1 of two options that are exactly the same, so they should give you exactly the same result.
Brian -
Reading the master data for an info object
hi experts,
I have a requirement, can i use the read master data option in transformations of a cube and store the text data related to material ??
thanks and regards
vijay
Edited by: pedamarla on Apr 17, 2009 12:25 PMHello Vijay,
As suggested above, you wont be able to read master data text of an InfoObject in your transformation, if you need to achive this, in the transformation routine, for the InfoObject, where you need to feed the material text, you would need to read the text table of InfoObject 0MATERIAL.
Please let me know if you need any more information.
Regards,
Pankaj -
Read from master data attribute
Hi BI experts,
Here is a challenging question.
One of the FIGL infoprovider do not have infoobject 0company. Added 0company and set up update type 'overwrite'. Update method 'Master data attribute'. So 0company should read from the master data attribute of 0Comp_code.
Master data attribute loaded for 0comp_code. Did transaction data load for FIGL infoprovider.
But 0company is blank in FIGL ODS.
Any thoughts..
Thanks in advanceIt should ideally pull the 0company, Otherwise try doing it thru Start routine ..
Create an internal table, pull company code and company from the master data table of Company code into this table.
Read from this table in your update routine and corresponding to the company code read the company and populate in your ODS.
It will also be better in performance compared to a master data look up !!!!!!!
Regards.
Maybe you are looking for
-
In-Place Hold Combined with In-Place Archiving in Exchange 2013
Hi, In-Place Hold is enabled for a mailbox and set to keep everything indefinitely. The same mailbox has a Retention Policy with a Default Policy Tag set to move everything to an archive mailbox after 2 years. Let's say the user keeps mail in the pr
-
Hi, on our SDK page, the link to the CS4 SDK accidentally got lost, but you can still download it here. Here is short guideline which SDK to use: If you or your customer are using only CS5, use the the CS5 SDK When your custom panel shall be used wit
-
How to add a photo to photo stream from pc
I have a lot a pictures on my pc but i have no way of looking at them from my iphone 4
-
I am also having problems with the printer not recognizing my memory card, but it has in the past. It will spontaneosly display the message "connecting" on the screen of the printer, and I have to turn it off or unplug it to print. I am assuming thes
-
Dinamic change language at RCF Communication Channel
Hi people! Do you have already found any problem with language in integration scenarios? We have many interfaces used by multi-language legacy applications... when an error is returned from abap programs (standard or not), the error message is always