Read receipt issue in exchange 2013

Hi All,
In my environment ,we are having exchange 2013 sp1 ENT edition with outlook 2010 and 2013 as the email client for the exchange users having their default email delivery to pst file .
In addition to that , if anyone of the sender send an email with read recipient option to the particular recipient who is having the default email delivery to pst file will generate an error message to the sender .
Note : Above issue is not happening for all the users having their default email delivery to pst file but for some users .
Error message : Your message was deleted without being read .
Steps handled :
1.) I have set the recipient mailbox message configuration to never send an read response but still the response is going to the sender.
2.) Checked the outlook versions.
Please do not ask us to have the default email delivery to exchange mailbox and it is not possible in our environment.
Regards
S.Nithyanandham
Thanks S.Nithyanandham

Hi Niko Cheng ,
Sorry for delay and thanks for your response.
Did the sender use outlook 2010 or 2013?
We are facing the same issue in both the versions
Is there the same issue when send an email with read recipient option via OWA?
Same is happening in outlook as well as in owa.
How did you set the outlook 2013 client to deliver email to pst file?
When we go to outlook account settings there is an option called "change folder" ,on that we
have set the pst file as the default delivery mail location .
As suggested ,We have moved the mailboxes from one database to another database , But still we are facing
the issue.
Regards
S.Nithyanandham
Thanks S.Nithyanandham

Similar Messages

Search issues with Exchange 2013

The search service no longer works. I have tried with stopping the Exchange Search Service and deleting the folder associated with the databases to no avail.<o:p></o:p>
When I run Get-MailboxDatabaseCopyStatus -Server "NAMEofServer" | Format-Table Name,Status,ContentIndex* -Auto through PS I receive
the below output.<o:p></o:p>
"Database" Mounted Unknown Could not find registry value of Index Status for database {a8281541-35b3-4e9b-b124-4adfa7ebf2d1}.
<o:p></o:p>
I then look to the registry location below to find absolutely nothing in there! No keys, no reference, nothing!<o:p></o:p>
\HLM\Software\Microsoft\ExchangeServer\v15\Search\IndexStatus\<o:p></o:p>
I cannot seem to resolve the search / indexing issues at all. The server is NOT a part of a DAG and issues extend to all 4 databases.<o:p></o:p>
I also am having issues that might be related when trying to move mailboxes to a different databases (same server). "I did try restarting the
replication service"<o:p></o:p>
The RPC call failed with result 'StorageTransientError'<o:p></o:p>
Any help in the right direction would be appreciated. I have had this issues since CU6.<o:p></o:p>
Thank you!<o:p></o:p>

Hi,
Well, we can try to recreate those registry entries.
Since your server is not a member of DAG, then the registry key should be like this:
{79853a57-6c9e-46a2-a5e3-70db036754f1} : 1,1,4294967297,2013-07-16 00:33:17Z,0,
The initial {GUID} is the GUID of the database.
The double numeric values (1,1;) signify the state[s] of the CI
The first number in the series is the Index Status. The second number in the series is the error code.
Index Status:
Unknown = 0
Healthy = 1
Crawling =2
Failed = 3
Seeding = 4
Failed And Suspended = 5
Suspended = 6
Disabled = 7
Auto-Suspended = 8
Healthy And Upgrading = 9
Error Code:
1 Success
2 Internal Error
3 Crawling Database
4 DatabaseOffline
5 MapiNetworkError
6 Catalog Corruption
7 Seeding Catalog
8 Catalog Suspended
9 Catalog Reseed
10 Index Not Enabled
11 Catalog Excluded
12 Activation Preference skipped
13 Lag Copy skipped
14 Recovery Database Skipped
15 Fast Error
16 Service Not Running
17 Index Timestamp too Old
Note: Before you modify the registry, make sure to back it up and make sure that you understand how to restore the registry if a problem occurs. For information about how to back up, restore, and edit the registry, click the following article number
to view the article in the Microsoft Knowledge Base: 256986 Description of the Microsoft Windows Registry
Refer from this blog:
http://blogs.technet.com/b/johnbai/archive/2013/07/16/exchange-2013-high-availability-fast-search-and-the-windows-registry.aspx
Please also check if there are any event logs indicated this issue, that will help us to troubleshoot.
Thanks.

OWA SSO issues in Exchange 2013 - 2007 co-existence

This may not be possible. For a multitude of reasons the client needs OWA authentication of Windows Integrated and Basic. As a result I''ve got a double prompt for users still on 2007 for OWA externally.
Do you have to use Forms Based Authentication to get SSO to work? Is it possible to enable FBA as well as basic and Windows auth?

FBA is required on the source and destination, yes. You would need to enable that and not use Basic or Windows Auth.
http://blogs.technet.com/b/exchange/archive/2014/03/12/client-connectivity-in-an-exchange-2013-coexistence-environment.aspx
CAS2013 in Site1 will authenticate the user, do a service discovery, and determine that the mailbox is located within the local AD site on an Exchange 2007 Mailbox server.
CAS2013 will initiate a single sign-on silent redirect (assumes FBA is enabled on source and target) to
legacy.contoso.com. CAS2007 will then facilitate the request and retrieve the necessary data from the Exchange 2007 Mailbox server.
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

Outlook 2013 connection issue with exchange 2013

my exchange 2013 was upgrade from exchange 2010. after the upgrade (migration), i using outlook 2013 connect to exchange 2013. some very
weird issues happened.
when i using auto discovery to create profile and connect to exchange will success. but when i manually create the profilewill failed. the following pic for your reference. (same account, same PC)
please help, thanks lots!!!!

This is what changed in Exchange 2013. It uses RPC or HTTPs (Outlook Anywhere) and uses Server GUID to connect...
"As a result of these architectural changes, there have been some changes to client connectivity. First, RPC is no longer a supported direct access protocol. This means that all Outlook connectivity must take place using RPC over HTTP (also known as
Outlook Anywhere). At first glance, this may seem like a limitation, but it actually has some added benefits. The most obvious benefit is that there is no need to have the RPC client access service on the Client Access server. This results in the reduction
of two namespaces that would normally be required for a site-resilient solution. In addition, there is no longer any requirement to provide affinity for the RPC client access service.
Second, Outlook clients no longer connect to a server FQDN as they have done in all previous versions of Exchange. Outlook uses Autodiscover to create a new connection point comprised of mailbox GUID, @ symbol, and the domain portion of the user’s primary
SMTP address. This simple change results in a near elimination of the unwelcome message of “Your administrator has made a change to your mailbox. Please restart.” Only Outlook 2007 and higher versions are supported with Exchange 2013."
From : What's New in Exchange 2013-
http://technet.microsoft.com/library/jj150540%28EXCHG.150%29.aspx#BKMK_arch
Blog |
Get Your Exchange Powershell Tip of the Day from here

EAC and IMAP Issues after Exchange 2013 CU6

After deploying CU6 to Exchange servers there is no way to perform activities on Exchange Online (cosidering hybrid deployment). I noticed that there is a fix for it in http://support.microsoft.com/kb/2997355 but
it seems that it doesn’t do the trick. After installing CU6 file which is altered in the script cannot be found (RemoteDomains.xaml).
Also after installing CU6 I've noticed issue with IMAP and Thunderbird. It seems that commands like move are interpreted by the server as bad commands (error 12).
Did you encounter with any of those problems? Do you have/recommend any workaround or fix?

No, Exchange is in default direcotry. I've even tried v2 of script which gets Exchange path from registry.
This file does not exist (I've looked on both CAS na MDBs)

Mail Read Receipt Issue I Don't See Addressed

I have a company e-mail account that I use for work along with other accounts that are all in my Mail client. I use my MacBook Pro and my iPhone to send and receive mail. Everything works fine.
My employer has recently asked that I have a return receipt function turned on so that he can know or other people at our office who send me messages can know when I get these messages. I tried and explained before that because I'm not using Windows and Outlook like all of them that I can't enable that feature. Apparently now he wants that changed and wants me to use outlook. This is a big pain because I'm used to easily using Mail to manage everything and don't want to have to use parallels everytime I check my work e-mail. Is there anytype of fix that I could do that would give him confirmation everytime I get an email from him as opposed to actually having to boot up windows everytime I need to check an email.
I know you can do the terminal command to request a return receipt but all I'm concerned with is sending one to him when I get an email from him.
Thanks,
Joe.
Message was edited by: asentimentalsong

paste the following into AppleScript Editor and save it somewhere.
<pre style="
font-family: Monaco, 'Courier New', Courier, monospace;
font-size: 10px;
margin: 0px;
padding: 5px;
border: 1px solid #000000;
width: 720px;
color: #000000;
background-color: #ADD8E6;
overflow: auto;"
title="this text can be pasted into the Script Editor">
using terms from application "Mail"
on perform mail action with messages selectedMsgs
repeat with msg in selectedMsgs
set theSubject to subject of msg
set theSender to extract name from sender of msg
set theAddress to extract address from sender of msg
set theDate to date sent of msg
tell application "Mail"
set nowDate to current date
set theBody to "Your message" & return & return & " Re: " & theSubject & return & "Sent: " & theDate & return & return & "was received and read " & nowDate & ". Thank you." & return
set newMessage to make new outgoing message with properties {subject:"Read: " & theSubject, content:theBody & return & return, visible:true}
tell newMessage
make new to recipient at end of to recipients with properties {name:theSender, address:theAddress}
end tell
send newMessage
end tell
end repeat
end perform mail action with messages
end using terms from</pre>
then make your rule as follows.
set it to apply to all messages and in the action set it to run the above script.
it will send an acknowledgment message indicating the time and the message subject received.

Issue Installing Exchange 2013 CU1: Mailbox role:Mailbox service

I receive this error when Installing Cumulative Update 1.
Error:
The following error was generated when "$error.Clear();
            if ($RoleIsDatacenter -ne $true)
            if (Test-ExchangeServersWriteAccess -DomainController $RoleDomainController -ErrorAction SilentlyContinue)
            $sysMbx = $null;
            $name = "SystemMailbox{bb558c35-97f1-4cb9-8ff7-d53741dc928c}";
            $dispName = "Microsoft Exchange";
            Write-ExchangeSetupLog -Info ("Retrieving mailboxes with Name=$name.");
            $mbxs = @(Get-Mailbox -Arbitration -Filter {name -eq $name} -IgnoreDefaultScope -ResultSize 1 );
            if ($mbxs.Length -eq 0)
            Write-ExchangeSetupLog -Info ("Retrieving mailbox databases on Server=$RoleFqdnOrName.");
            $dbs = @(Get-MailboxDatabase -Server:$RoleFqdnOrName -DomainController $RoleDomainController);
            if ($dbs.Length -ne 0)
            Write-ExchangeSetupLog -Info ("Retrieving users with Name=$name.");
            $arbUsers = @(Get-User -Filter {name -eq $name} -IgnoreDefaultScope -ResultSize 1);
            if ($arbUsers.Length -ne 0)
            Write-ExchangeSetupLog -Info ("Enabling mailbox $name.");
            $sysMbx = Enable-Mailbox -Arbitration -Identity $arbUsers[0] -DisplayName $dispName -database $dbs[0].Identity;
            else
            if ($mbxs[0].DisplayName -ne $dispName )
            Write-ExchangeSetupLog -Info ("Setting DisplayName=$dispName.");
            Set-Mailbox -Arbitration -Identity $mbxs[0] -DisplayName $dispName -Force;
            $sysMbx = $mbxs[0];
            # Set the Organization Capabilities needed for this mailbox
            if ($sysMbx -ne $null)
            # We need 1 GB for uploading large OAB files to the organization mailbox
            Write-ExchangeSetupLog -Info ("Setting mailbox properties.");
                set-mailbox -Arbitration -identity $sysMbx -UMGrammar:$true -OABGen:$true -GMGen:$true -ClientExtensions:$true -MailRouting:$true -MessageTracking:$true -MaxSendSize
1GB -Force;
            else
            Write-ExchangeSetupLog -Info ("Cannot find arbitration mailbox with name=$name.");
            else
            Write-ExchangeSetupLog -Info "Skipping creating E15 System Mailbox because of insufficient permission."
        " was run: "Database is mandatory on UserMailbox.".
Error:
The following error was generated when "$error.Clear();
            if ($RoleIsDatacenter -ne $true)
            if (Test-ExchangeServersWriteAccess -DomainController $RoleDomainController -ErrorAction SilentlyContinue)
            $sysMbx = $null;
            $name = "SystemMailbox{bb558c35-97f1-4cb9-8ff7-d53741dc928c}";
            $dispName = "Microsoft Exchange";
            Write-ExchangeSetupLog -Info ("Retrieving mailboxes with Name=$name.");
            $mbxs = @(Get-Mailbox -Arbitration -Filter {name -eq $name} -IgnoreDefaultScope -ResultSize 1 );
            if ($mbxs.Length -eq 0)
            Write-ExchangeSetupLog -Info ("Retrieving mailbox databases on Server=$RoleFqdnOrName.");
            $dbs = @(Get-MailboxDatabase -Server:$RoleFqdnOrName -DomainController $RoleDomainController);
            if ($dbs.Length -ne 0)
            Write-ExchangeSetupLog -Info ("Retrieving users with Name=$name.");
            $arbUsers = @(Get-User -Filter {name -eq $name} -IgnoreDefaultScope -ResultSize 1);
            if ($arbUsers.Length -ne 0)
            Write-ExchangeSetupLog -Info ("Enabling mailbox $name.");
            $sysMbx = Enable-Mailbox -Arbitration -Identity $arbUsers[0] -DisplayName $dispName -database $dbs[0].Identity;
            else
            if ($mbxs[0].DisplayName -ne $dispName )
            Write-ExchangeSetupLog -Info ("Setting DisplayName=$dispName.");
            Set-Mailbox -Arbitration -Identity $mbxs[0] -DisplayName $dispName -Force;
            $sysMbx = $mbxs[0];
            # Set the Organization Capabilities needed for this mailbox
            if ($sysMbx -ne $null)
            # We need 1 GB for uploading large OAB files to the organization mailbox
            Write-ExchangeSetupLog -Info ("Setting mailbox properties.");
                set-mailbox -Arbitration -identity $sysMbx -UMGrammar:$true -OABGen:$true -GMGen:$true -ClientExtensions:$true -MailRouting:$true -MessageTracking:$true -MaxSendSize
1GB -Force;
            else
            Write-ExchangeSetupLog -Info ("Cannot find arbitration mailbox with name=$name.");
            else
            Write-ExchangeSetupLog -Info "Skipping creating E15 System Mailbox because of insufficient permission."
        " was run: "Database is mandatory on UserMailbox. Property Name: Database".
Can Anyone help me figure out how I can resolve this error?

Hello,
Please make sure you have these permission " Schema Admins", "Domain Admins" and "Enterprise Admins".
Here is the article for your reference.
Prepare Active Directory and Domains
http://technet.microsoft.com/en-us/library/bb125224(v=exchg.150).aspx
Cara Chen
TechNet Community Support

Exchange 2010 ambiguous URL'S issue while coexist with exchange 2013

Hi ,
Please correct me if i am wrong and also all of you tell me your valuable suggestions.
Like as said in the below article we are having an exchange 2010 ambiguous url's in place.
Referred
article :
http://blogs.technet.com/b/exchange/archive/2013/05/23/ambiguous-urls-and-their-effect-on-exchange-2010-to-exchange-2013-migrations.aspx
As said in this article, if we have exchange 2010 ambiguous url's in place we will face issues during exchange 2013 coexistence.I agree with that point .
Question : On such case why don't we use a separate namespace for internal and external outlook anywhere settings in exchange 2013 which is different from cas array name and also there is no need to disturb the existing exchange 2010
environment by changing the rpc client access attribute in exchange 2010 databases or by forcing the exchange 2010 internal outlook clients to connect via OA. Please clarify my doubt and say whether the mentioned scenario is possible or not ?
Note : Same time please consider the new namespace which is going to be utilized on exchange 2013 outlook anywhere settings is available on SAN certificate.
Regards
S.Nithyanandham

Hi ,
Please someone shed light on this case.
Regards
S.Nithyanandham
Thanks & Regards S.Nithyanandham

Exchange Read Receipt on Samsung Android Phones

All:
One of the principals at a company I work for informs me that
she used to have the ability to request a read receipt from her Exchange
account on an Android phone (Galaxy S4), but that the option recently
disappeared.
I’ve looked at her phone but can’t seem to find any such
option to enable a read receipt when sending a message, and my Web research
hasn’t turned up anything useful either.
Does anyone know how one gets Exchange read
receipts on a GS4? Thanks.
Joe
P.S. Just want to add that I know read receipts are pretty
much BS, but when the boss asks for something…well, you know.
This topic first appeared in the Spiceworks Community

All:
One of the principals at a company I work for informs me that
she used to have the ability to request a read receipt from her Exchange
account on an Android phone (Galaxy S4), but that the option recently
disappeared.
I’ve looked at her phone but can’t seem to find any such
option to enable a read receipt when sending a message, and my Web research
hasn’t turned up anything useful either.
Does anyone know how one gets Exchange read
receipts on a GS4? Thanks.
Joe
P.S. Just want to add that I know read receipts are pretty
much BS, but when the boss asks for something…well, you know.
This topic first appeared in the Spiceworks Community

Tow read receipt for one email

dear all
I was installed exchange 2013 in stead of 2003 few days ago from that time Iam facing problem with the read receipt
one is generated from the server and the other upon client request for read report the means anyone send us email he received tow read messages for the email the first is onbehalf the receipt and the other upon the sender request for exmaple
musheer sheikhali <[email protected]>; on behalf of; musheer sheikhali
musheer sheikhali <[email protected]>;
these are 2 read receipt for the same email

Hi,
May I know how you could tell where the read receipts are generated from? What is your Outlook version?
Sometimes Cached Mode may cause the duplicate read receipts issue, this is because the cached file is corrupted, please run Scanpst.exe to repair the .ost file to test the result:
http://support.microsoft.com/kb/272227/en-us
You may also remove the delegates for this account to try again.
Regards,
Melon Chen
TechNet Community Support

Exchange 2013 SP1 Object is corrupted and inconsistent state after Lync 2013 Installation

Hi Fellows,
I am facing an issue with Exchange 2013 SP1 (5.0.847.32)
environment. I recently installed Lync 2013 (version: 5.0.8308.0) a week ago and just recently start getting the below error when configuring delegation or modifying the users/groups from Exchange Control Panel:
"The Object <object DN> has been corrupted, and it's in an inconsistent state. The following validation errors happened:
The access control defines the ObjectType <object guid> that can't be resolved.."
I can see some forum threads with same issue (links given below) but unable to find if this is a known issue and how to get it resolved. Need assistance if anyone has faced same and could help me out to figure it.
http://social.technet.microsoft.com/Forums/exchange/en-US/72310530-d1de-4b39-a0fb-1592247df03f/access-control-entry-issue-after-installing-lync-2013-into-the-forest?forum=exchangesvrdeploy
http://www.networksteve.com/exchange/topic.php/Issue_with_exchange_2013_lync_2013_intergration/?TopicId=37192&Posts=2
J.A

Hi
Usually the affected SID objects are referring to deleted objects.
Use the PsGetSid tool to try to resolve them.

Error upgrading form exchange 2010 to exchange 2013

Hello,
I have Exchange 2010 sp3 running on win server 2012 R2 sp1 standanrd. I would like to upgrade to exchange 2013 and I read that installation of exchange 2013 is coexistent with exchange 2010 already installed. But When I try to install exchange 2013 I keep
getting this error :"Exchange server is in an inconsistent state. Only disaster recovery mode is available. Please use Setup /m:RecoverServer to recover this Exchange server." But after closing set up the server is still running
fine.

Hi,
Based on my research, the issue can occur when the Exchange server object already exists within Active Directory.
Thus, I’d like to confirm the following information:
1. Does your new Exchange 2013 server have the same server name with the previous one?
2. Have you change your Exchange 2010 server name to legacy.domain.com?
Here is a similar thread you can refer to:
http://social.technet.microsoft.com/Forums/exchange/en-US/20bab6f7-56e6-49b9-94df-48707fb915f7/installation-errorfresh-install-on-a-fresh-clean-server-2012?forum=exchangesvrgeneral
If you have any question, please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support

Exchange 2013 EAC will not run with Exchange 2010 CAS\HT servers shut down.

Hi Folks,
A little background - We have just migrated all our user mailboxes and public folders to Office 365 using a hybrid configuration. Now that the migration is essentially finished, I'd like to decommission our on-prem Exchange infrastructure and remove the
hybrid config. We are using dirsync with password sync to replicate our AD to the cloud.
I've read that even if you remove your hybrid configuration, it's a good idea to keep one on-prem Exchange server around so you can edit Exchange attribs (such as email addresses) in a supported manner, rather than using ASDI edit, etc.
To this end, I installed a single Exchange 2013 CA\MBX server. After installation, the EAC worked fine, and I was able to view our on-prem users, groups, etc. Last week, I shut down our two Exchange 2010 CAS\HT servers as a test to see if anything broke
prior to decommissioning them (these were the hybrid servers as well). After doing so, the Exchange 2013 EAC no longer works for some reason, and behaves in a very bizarre fashion. About once every 20 times or so, it will actually start and run. The other
times, it just has you enter your creds, then generates an HTTP 500 internal server error after entering them. It seems to make no difference if you attempt to access it by the fqdn, hostname, or localhost right on the box itself. Same behavior on Chrome or
IE.
Today as a test, I started up one of the 2010 CAS servers and lo and behold, the 2013 EAC ran without difficulty again. Any idea why this might be so? Thanks for any help,
Ian

Hi,
From your description, I recommend you use the following URL to check if you can access EAC. I see it works for several people about this issue.
https://<Exchange 2013 CAS FQDN>/ecp?ExchClientVer=15
Hope it helps.
Best regards,
Amy Wang
TechNet Community Support

Outlook clients on Windows XP not connecting to Exchange 2013

Previously outlook on XP machines were working fine with a SAN certificate having the mail.company.com as common name. Since we're moving to Exchange Hybrid we reissued the certificate and made company.com as the common name after that change all Outlook
on XP machines are not able to connect to the Exchange 2013. It is always asking for password. Outlook clients on windows 7 and 8 have no problem.
I wanted to run the below commands but I'm worried that it may break the connections of the Windows 7 and 8 machines:
Set-OutlookProvider
EXCH -CertPrincipalName msstd:mail.XXX.com
Set-OutlookProvider
EXPR -CertPrincipalName msstd:mail.XXX.com
Is it safe to run the commands or I should just reissue again the certificate and make the mail.company.com as the common name? Will there be any issues with Exchange 2013 hybrid if I do this?

I just reissued the certificate and all Outlook on windows xp are working now.

Exchange 2013 - outlook in LAN environment very slow upload but fast download - not using 'use cached exchange mode'

Hi,
I have Exchange 2013 setup in a new environment (no migration) and it is working great except I just realized there is a big problem.
I notice the following
Problem 1:
Outlook 2010 with sp2 with cached exchange mode on: when I import the pst into outlook, it imports fine but the sync is extremely slow. It uploads to the Exchange 2013 mail server at 20-70KB/sec (bytes) via LAN.
Problem 2:
Outlook 2010 with sp2 with cached exchange mode off: when I import the pst into outlook, it imports extremely slow. It uploads to the Exchange 2013 mail server at 20-70KB/sec (bytes) via LAN.
More info:
-user1 has 1GB of mail and when setting up the user on a new pc with outlook with cached exchange mode on, it downloads the mail very fast. It downloads at 40-80 Mbps/sec (bits).
-I have Exchange 2013 with CU3 with win2k12 non r2.
Why is the download so fast from Exchange 2013 but the upload to Exchange 2013 is extremely slow? How do I fix this?
Thanks

I did some more testing.
I setup a test environment with:
-Exchange 2013 SP1 on win2k12 r2
-Outlook 2010 SP2 on windows 7 sp1
-Outlook 2010 SP2 on windows 8.1
-Outlook 2013 SP1 on windows 8.1
Both windows 7 and windows 8.1 have the very slow upload issue to Exchange 2013. Windows 7 upload to Exchange 2013 is around 20-70KB/sec (bytes) via LAN. Windows 8.1 upload is a bit more responsive at around 500-600KB/sec (bytes) via LAN.
I changed the TcpAckFrequency to 1 for windows 7 and 8.1 and the problem went away. The upload on both Windows 7 and 8.1 was going at megabytes after the change.
I hope Microsoft fixes this soon.
PowerShell script to have this automated via GPO:
http://community.spiceworks.com/topic/571571-outlook-slow-after-migrating-to-exchange-2013
PowerShell Script:
$strGUIDS=[array](Get-WmiObject win32_networkadapter -filter "netconnectionstatus = 2" | select -expand GUID)
foreach ($strGUID in $strGUIDS) {New-ItemProperty -path HKLM:\System\CurrentControlSet\services\Tcpip\Parameters\Interfaces\$strGUID -propertytype DWORD -name TcpAckFrequency -value 1}

Read receipt issue in exchange 2013

Similar Messages

Maybe you are looking for