Read Receipt with HTMLDB.MAIL

Is it possible to request a read receipt if I'm already using HTMLDB.MAIL or do I have to convert to UTL_SMTP ?

Dan,
How did you accomplish the read receipt?
Thanks,
Steve

Similar Messages

  • Can I get a Read Receipt with Mail, like in Outlook?

    Can I get a Read Receipt with Mail, like in Outlook?
    W.W.

    It is possible, though not through the GUI. And as Dave points out, asking for a receipt does not mean that you will get one. The magic incantations for requesting receipts are detailed, amongst other places, in this article. It requires using the Terminal, and once set affects all messages you send until you unset it again.
    If you search this forum for read receipts (the topic surfaces frequently) you should find a helpful Applescript for turning them on and off, to save using the terminal.
    AK

  • Read receipts in Mac mail.

    I'll prefix this with the fact that I'm a total Macbook and Yosemite newb. As in I have not used a mac since 1992.
    I thought I had found an article on how to send and receive read receipts in Mac mail, but after searching again, all I found was some obscure comments that read receipts were really not necessary, so it was not a big deal, and another article that showed how to create rules via the unix console...not really what I was looking for. I just was wondering if there is not a setting I am missing? Business people DO need, as a matter of doing business, require read receipts, for obvious reasons. If you are not in business or government this whole thread will be baffling and boring...sorry.
    Finally , if not, will read receipts from gmail , show up in Mac mail if it is set up? ...or I would be just better to wash my hands of Mac mail, and use my Gmail, and if so, is there a way to do this...an extension perhaps, in Safari?
    Thanks for any and all help.
    Dave.

    Rodolfo,
    I guess you are missing my somewhat sarcastic sense of humour, and for that, I apologize.
    Of course OS X can get viruses, malware and pesky adware. I was merely poking fun, at those, who are no so technically inclined, and tend to just "drink the koolaid" regardless of the established facts and body of evidence. I am acutely aware which operating systems are vulnerable and why. In my over 20 years of using computers for work and play, in my experience, UNIX has been the most secure...which is why it is the choice of governments' world-wide, and the least was WIN95-98. I had no virus' or malware at all with Win7...using MaCaffe, MalwareBytes, and SuperAdBlocker (which is a Chrome extension which seems to work fine on OS X) And no they did not slow down my machines (Norton did...very slow) Hackers find no challenge in writing for only 9% ( OS X )  of the units out there, as the 90% is a much bigger, and more lucrative target. It has nothing to do with the inherant inability for OS X to get viruses, malware or adware.
    I am optimistic for the future of OS X, as it is slowly gathering steam, and garnering lots of attention from other platform users.
    The biggest danger any any OS is smugness.
    Dave

  • Can you get "read receipts" on e mails

    Can you get "read receipts" on e mails?

    No, which can be prevented by default with the recipient's email client that supports this or by individual message when requested by the sender of a message.

  • Help in getting the Read receipt in external mails ( like yahoomail , gmail

    Hi Experts,
    Scenario : We are sending notification mail to our external vendors for example abc.hotmail.com. We expect a Read acknowledgement to ensure the external vendor has gone through our notification generated from our SAP system. Point to consider is the two mail servers are different, sending mail server is configured to Outlook where as the receiving server will differ each time.
    It would be better if anyone lets me know whether SAP ensure that we get read receipt (
    acknowledgement) from other mail servers also?
    Steps followed are:
    Process 1: Using the function Module: SO_DOCUMENT_SEND_API1
    Populating the fields:
        wa_receivers-receiver   = <External Email address>.
        wa_receivers-rec_type   = 'U'.
        wa_receivers-notif_read = 'X'.
    Passing this structure to the Tables parameter: Receivers.
    However the read receipt is not obtained.
    Process 2: Using the class and the method:
    cl_send_request_bcs=>create_recipient_from_soos1
    The structure is getting populated as:
            recipient_soos1-recesc = 'U'.
            L_recipient_soos1-recextnam = < External email>
            l_recipient_soo1s-read      = 'X'.
    Also passing:
    I_requested_status = u2018Au2019.
    I_status_mail = u2018Au2019.
    CALL METHOD send_request->set_status_attributes
                EXPORTING
                  i_requested_status = i_requested_status
                  i_status_mail      = i_status_mail.
    However the read receipt is not obtained.
    Basis Settings:
    SCOT->Settings->Confirmation of Receipts -> the first option is checked.
    However still we are not getting the read receipt. The Delivery receipt is obtained but not the read-receipt
    Thanks
    Papiya

    Hi,
    Using the FM : SO_DOCUMENT_SEND_API1
    When you pass values to
    RECIEVERS
    for Delivery reciept : notif_del  = 'X'
    for Read reciept : notif_ndel = 'X'
    Try shceduling the report : RSCONN01 with default job name : SAPCONNECT ALL SEND
    and check if this helps.
    Cheers,
    Remi

  • Read receipts in Receiver mail

    Hi All,
    If we were sending out a mail from PI, is there any option that we can configure a read receipt?
    There is an option for delivery acknowledgements, but is it possible to configure read receipts at the adapter level?
    Do suggest some alternatives if any.
    Regards,
    shabz

    >
    Prateek Raj Srivastava wrote:
    > Delivery acknowledgement's technical name is THeaderDISPOSITION-NOTIFICATION-TO.
    > Disposition Notification is commonly called as the Read Receipt which you require. It is an adapter specific attribute. Have you tried configuring it?
    >
    > Regards,
    > Prateek
    are you sure its not the delivery acknowledgment? delivery acks are different from read receipts

  • Read receipt for lion mail

    How can I get read receipt in my aplle mail? I use Mac OS Lion

    http://email.about.com/od/macosxmailtips/qt/et_request_recp.htm

  • How do I send an email with a "read receipt" please

    how do I send an email with a "read receipt" please

    banyard,
    There is no support for read receipts in Apple mail.
    Sorry,
    Captfred

  • Read receipts for mail

    Is there any way to get a read receipt with Mail like there was when I had Outlook in a previous life? Cant find how to block a read receipt when requested either. Any help would be appreciated.
    Thanks

    The Mail application does not include a read receipt request for sent messages nor does it provide a read receipt without your knowledge when requested by the sender of a message when opening a received message.
    I consider this an invasion of privacy. A minor one but an invasion of privacy nevertheless.
    Via the Terminal, you can have Mail "request" a read receipt for all sent messages but this will work only if the recipient's email client supports this and the recipient enables the option.
    http://discussions.apple.com/message.jspa?messageID=2297045#2297045

  • Setting mail read receipt

    Hello,
    I'm trying to send a msg with read receipt but in mail theres no option for that. I've googled on the subject, find some information, but i'm not sure that is completely correct.
    Anyone of you guys have tried to work this out?
    Thanks for your time and help.
    Cheers

    Whatever you found is likely correct.
    Mail does not support read receipts, I imagine because it is a stupid concept.
    You can set up Mail to always add a custom header that requests a read receipt. There is no way to set that up on a per email basis. It is all or nothing.
    Why is it a stupid concept you might ask? Because read receipts depend on the destination email client to handle them (Mail does not), and they depend on your recipient allowing them to be sent. I believe all email clients are now set up with automatic response turned off, if it exists at all. So, you not getting a read receipt is completely useless. You have no idea if the email has not been read, or the person you sent it to doesn't allow responses or if their email client even knows what to do with the read receipt.
    Also, spammers have co-opted the read receipt to validate their email lists. Send a read receipt and get a response = valid email address to sell.
    Instead of trying to sneak in a read receipt on someone, politely request in the email itself notification that they have read your email as it is very important to you for some reason.

  • Getting Receipt confirming e mail has been read

    When sending an e mail I would like confirmation that it has been opened / read by the person (s) it has been sent to.
    Can it be done..?
    How do you set it up..?

    I found something online which does the job very well.
    PLEASE NOTE: I did not create this but I couldn't find the link to the site I found it on initially, so apologies to the original write for not giving credit.
    Paste this into Script Editor and make into an application.
    Double clicking on it will present you with a dialogue box asking which account you wish to use (if you have multiple accounts) and will then pop up a normal compose mail box.
    For some reason if you have images attached to your signature it doesn't display them when you compose your mail but it will still send them regardless.
    Obviously this is subject to the receiver having a mail client that will accept read receipts.
    tell application "Mail"
    set listOfSenders to {}
    set everyAccount to every account
    repeat with eachAccount in everyAccount
    set everyEmailAddress to email addresses of eachAccount
    if (everyEmailAddress is not equal to missing value) then
    repeat with eachEmailAddress in everyEmailAddress
    set listOfSenders to listOfSenders & {(full name of eachAccount & " <"Which account would you like to send this message from?" without multiple selections allowed
    if theResult is not equal to false then
    set theSender to item 1 of theResult
    tell application "Mail"
    set newMessage to make new outgoing message with properties {}
    tell newMessage
    set visible to true
    set sender to theSender & "
    Disposition-Notification-To: " & theSender
    end tell
    activate
    end tell
    end if
    I hope this helps you out. Tested and working in 10.4.11

  • Obtaining a read receipt when sending by mail in osx or iOS. How?

    How do you obtain read receipts in OSX mail?

    How to Request Read Receipts in Mac OS X Mail

  • In Mail on my Mac how do I request a read receipt?

    In Mail on my Mac how do I request a read receipt?

    Greetings barendfromport,
    Welcome to the Apple Support Communities!
    I understand that you would like a read receipt in Mac Mail on your computer. For this question, I would refer you to the attached discussion. 
    How to set up read receipts in mail on OSX Mave... | Apple Support Communities
    Cheers,
    Joe

  • How to get Read receipt in gmail app on iphone 4s?

    I have gmail app on my iphone 4s but i do not get read receipt option while sending mail kindly advise

    You can use 3rd party services to use read receipts with Gmail. Companies like ContactMonkey (www.contactmonkey.com) and Spypig offer email tracking for Gmail and Outlook. They're both pretty easy to use.
    Happy tracking!

  • How to get read receipt

    How do I get a read receipt with this email service

    If you're looking for a confirmation of a read email you sent it aint there. (Mail).

Maybe you are looking for

  • ATI HDMI Audio Not Working

    Hi. I'm trying to get my ATI HDMI audio working. I've followed the instructions at https://wiki.archlinux.org/index.php/ATI#HDMI_Audio and running "aplay -D plughw:1,3 /usr/share/sounds/alsa/Front_Center.wav" outputs no errors nor any sound on my TV.

  • Is there a limit to track repeat, or an automatic time-out?

    I have a single track off a white noise cd that I listen to while I sleep to minimize my tinnitus (ear ringing). My current solution is a cd player on repeat, but i thought I could just rip the track I want to mp3 and use itunes instead of the old cd

  • Calendar won't print lines on it ( to make it look like a calendar)

    i had windows xp and everything worked great. now with vista everything works and hot syncs fine but printing the calendar is just a blank piece of paper with the dates and events on it... i have to draw in lines to block of the days.. this is drivin

  • Data is not showing when condition is applied

    Hi All, I have a small query. Am trying to use a if condition to achive the following: If the Exchange rate is 1, then I need to concatinate the revenue field with $. And if it is not, then concatinate it with #. Exchange rate is another column in th

  • Uploading iphoto book

    G4   Mac OS X (10.3.9)   I tried today to upload my first ibook. It contained 48 pages of photos most of them 3-5 MB. As it loaded it said it was loading a 7.8 MB total. I canceled the order because it means there is not enough resoluction. What am I