Read reviews for all markets?

Is there some way to read the reviews of an app at appstore for all markets? In Itunes I only see the reviews for the market my itunes are connected to and not the whole world.
Message was edited by: martymart

But it is a pain switching to 20 different store!
I also would like the ability to see all reviews at once. Guess time to file another enhancement request. It would also be nice to have the option to be e-mailed when a review is posted (an option, because I am sure the uber-popular ones would not want a constant flood of e-mails).

Similar Messages

  • What is the best iPhone 4/4s extended battery case? I've been reading reviews for a bunch of them, but they all seem to say the same thing.

    What is the best iPhone 4/4s extended battery case? I've been reading reviews for a bunch of them, but they all seem to say the same thing.

    Personally most of my co-workers are using the Mophie case. They are great quality but can be pretty pricey. All of my fellow co-workers have been using this case to help with the upsetting battery drain that comes with ios5. I have seen people drop the the iPhone with this case on and seems to be a good sturdy case with an extra 9 hour battery life. Anyway's here is their web site if you want to look into these cases further.
    http://www.mophie.com/battery-cases-s/51.htm

  • Make UDF Read-only for all users

    Hi
    Can i use any script to make a UDF read-only for all users?
    i am looking at CPRF and CUFD Tables
    thanks

    Hi,
    You should never try updating system table directly.  That will against supporting policy by SAP.
    Thanks,
    Gordon

  • READ privileges for *all the databases*

    Is it possible to grant READ privileges for all the databases objects (tables, schema, triggers, procedures, view and etc)

    SHANOJ wrote:
    Is it possible to grant privileges to all objects in one time?It depends on what you mean by 'in one time'. In one single SQL statement? No. But there's nothing stopping you issuing a billion grants one after the other in your session.
    Roles are probably better suited for this task. But are you sure you really want to grant SELECT privileges on all the tables in the database? It's more common to grant SELECT on all the 'MARKAPP' tables to the 'MARKAPP_READ_ONLY' role...

  • Change read mode for all queries

    Hello, this should be an easy question for someone.  I believe there is a way to change the "read mode" for all queries at once.
    Can you tell me how to do that ?
    Thanks very much !!
    Keith

    Hello Bhanu,
    Iam not able to change query in my BW system but when i add authorization of SAP_NEW and SAP_ALL ,then iam able to change ,can i make modification in this table and then
    change or its a authorization problem.If this issue can be resolved with changing this table, kindly tell me how i have to call this table and wt parameters to change,kindly revert at earliest.I have sent u a mail also,kindly plz check.
    Regards,
    Saumya

  • Is it possible to query for all marketing doc hits to one account?

    We have been struggling to create one single query that pulls all entries made to a particular revenue account by all marketing documents (in 2007A, PL42).
    For example, an item may be used on an A/R invoice, A/R, credit memo, A/P invoice, or A/P credit memo in any given month.  We've been using four different queries to pull basic data from each one, then blending them together in Excel.  This seems silly, and I'm hoping we can blend the code in one query instead of running four different ones.  Thoughts?
    One of the four queries we've been using:
    SELECT T0.[DocNum], T0.[DocDate], T1.[ItemCode], T1.[Dscription], T1.[FreeTxt], T1.[Quantity], T1.[Price], T1.[LineTotal], T1.[AcctCode], T2.[Segment_0], T2.[AcctName]
    FROM OINV T0  INNER JOIN INV1 T1 ON T0.DocEntry = T1.DocEntry
         INNER JOIN OACT T2 ON T1.AcctCode = T2.AcctCode
    WHERE T2.[Segment_0] ='319000' AND T0.[DocDate] BETWEEN '[%0]' AND '[%1]'
    ORDER BY T1.[ItemCode]
    It would be even cooler if we could choose two segments to review (i.e. also '318000').
    Kind Regards,
    Russell Clayton

    When trying to link AP docs as well, I am only retrieving AR.  Any suggestions on this, and how to properly order by T2.Segment_0 would be greatly appreciated.  Thanks!
    SELECT T2.Segment_0, T2.AcctName, T1.[ObjType], T0.DocNum, T0.DocDate, T0.CardName, T1.ItemCode, T1.Dscription, T1.FreeTxt, T1.Quantity, T1.Price, T1.LineTotal
    FROM dbo.OINV T0 INNER JOIN dbo.INV1 T1 ON T0.DocEntry = T1.DocEntry
    INNER JOIN dbo.OACT T2 ON T1.AcctCode = T2.AcctCode
    WHERE T0.DocDate BETWEEN '[%0]'
    AND '[%1]'
    UNION ALL
    SELECT T2.Segment_0, T2.AcctName, T1.[ObjType], T0.DocNum, T0.DocDate, T0.CardName, T1.ItemCode, T1.Dscription, T1.FreeTxt, T1.Quantity, T1.Price, T1.LineTotal
    FROM dbo.ORIN T0 INNER JOIN dbo.RIN1 T1 ON T0.DocEntry = T1.DocEntry
    INNER JOIN dbo.OACT T2 ON T1.AcctCode = T2.AcctCode
    WHERE T0.DocDate BETWEEN '[%0]'
    AND '[%1]'
    SELECT T2.Segment_0, T2.AcctName, T1.[ObjType], T0.DocNum, T0.DocDate, T0.CardName, T1.ItemCode, T1.Dscription, T1.FreeTxt, T1.Quantity, T1.Price, T1.LineTotal
    FROM dbo.OPCH T0 INNER JOIN dbo.PCH1 T1 ON T0.DocEntry = T1.DocEntry
    INNER JOIN dbo.OACT T2 ON T1.AcctCode = T2.AcctCode
    WHERE T0.DocDate BETWEEN '[%0]'
    AND '[%1]'
    SELECT T2.Segment_0, T2.AcctName, T1.[ObjType], T0.DocNum, T0.DocDate, T0.CardName, T1.ItemCode, T1.Dscription, T1.FreeTxt, T1.Quantity, T1.Price, T1.LineTotal
    FROM dbo.ORPC T0 INNER JOIN dbo.OPC1 T1 ON T0.DocEntry = T1.DocEntry
    INNER JOIN dbo.OACT T2 ON T1.AcctCode = T2.AcctCode
    WHERE T0.DocDate BETWEEN '[%0]'
    AND '[%1]'
    ORDER BY  T2.Segment_0 ASC

  • Read data : for all entries

    wht happens if v read data using FOR ALL ENTRIES in select statement

    Hi Ankur,
    You can only use FOR ALL ENTRIES IN ...WHERE ...in a SELECT statement.
    SELECT ... FOR ALL ENTRIES IN itab WHERE cond returns the union of the solution sets of all SELECT statements that would result if you wrote a separate statement for each line of the internal table replacing the symbol itab-f with the corresponding value of component f in the WHERE condition.Duplicates are discarded from the result set. If the internal table itab does not contain any entries, the system treats the statement as though there were no WHERE cond condition, and selects all records (in the current client).
    For Example:
    SELECT *
      FROM SCARR
      INTO TABLE t_scarr.
    LOOP AT t_SCARR INTO wa_scarr.
      SELECT SINGLE *
        FROM sflight
        INTO wa_sflight
       WHERE carrid EQ wa_scarr-carrid.
      APPEND wa_sflight TO t_sflight.
    ENDLOOP.
    Instead of the Above use below code:
    SELECT *
      FROM SCARR
      INTO TABLE t_scarr.
    SELECT *
      FROM SFLIGHT
      INTO TABLE t_sflight
       FOR ALL ENTRIES IN scARR
    WHERE carrid EQ t_scarr.
    this condition, return all entries of the sflight
    Refer the Below Links for more Info:
    http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb3a1f358411d1829f0000e829fbfe/content.htm
    Regards,
    Sunil

  • Alternate Index not read with FOR ALL ENTRIES

    I have a select statement like:
          SELECT d~dokar
                 d~doknr
                 d~dokvr
                 d~doktl
                 l~lifnr
                 l~stcd1
                 l~stcd2
                  APPENDING CORRESPONDING FIELDS OF TABLE t_dms
                 FROM lfa1 AS l JOIN drad AS d
                      ON llifnr = dobjky
                 FOR ALL ENTRIES IN t_infile
                 WHERE  ( l~stcd2 =  t_infile-taxcode2ssn
                    OR  l~stcd2 =  t_infile-taxcode2fed
                    OR  l~stcd2 =  t_infile-fedtaxid2 )
                   AND  d~dokob =  'LFA1'
                   AND  d~obzae =  '0000'
                   AND  d~doktl IN s_doktl.
    I have defined an alternate index on LFA1 called ZX2 (MANDT, STCD2). T_INFILE is sorted by a field called FEDTAXID. This is a nine character field. TAXCODE2SSN is the same number but it is formatted 999-99-9999. TAXCODE2FED is the same number only formated 99-0000000. FEDTAXID2 is the same as FEDTAXID.
    S_DOKTL is defined as sign = I, Option = BT, Low = 000, High = 000.
    The problem is LFA1ZX2 is not being used. The file is being read sequentially. Any ideas what is causing the alternate index to be ignored?  I wrote another select statement where I removed the FOR ALL ENTRIES and the "ddoktl IN s_doktl" and the alternate index is being used. Any thoughts?
    Thanks,

    It's probably the OR-condition causing the problem. An alternative could be a driver table (t_infile or a new one) that does not have one line with three tax code variations but rather one line for each variation in  one generic column. If this driver table is sorted by tax code and stripped of duplicates, there might be an improvement possible.
    Thomas

  • Read this for all having problem setting up Routers with Broadband Modems

    I have used Netgear and Linksys for years now, but hadn't setup a new router for a while. Hence, struggled installing a new Airport Extreme to replace my Linksys Router which was not providing enough signal strength for my Mac Mini based iTunes database to stream to my Apple TV wirelessly. Here is what I did finally to resolve the issue:
    My setup: Arris TM502G broadband modem provided by Comcast
    1. I kept the old router powered up and removed the WAN connection from it and connected it to the AE.
    2. After I installed the Airport Utility, I powered up the AE and let it go thru the installation process and allowed it to pick up the settings from the old router. This step is simple and can be done manually.
    3. After that the struggle began as "Renew DHCP" wouldn't get me a valid 71.xxx.xxx.xxx series IP address from the Modem. I read all the posts (and felt the same pain as others). Saw very helpful posts with good intention to help others like "remove the power", "remove the battery from the modem", "let it sit without power for 24hrs", etc.. I couldn't use some of these suggestions as my house will be without an internet connection for a long time.
    4. Finally, I pressed the "Reset" switch behind the modem for a few seconds until all but the power indicator had turned off indicating a reset. Once it came up and all the LEDs were lit, a few seconds later the LED on the AE turned solid Green indicating success. Looked at the Airport Utility and indeed it had got the new IP address.
    There are not too many broadband modem manufacturers and so it shouldn't be too difficult to publish the installation procedure under FAQ on Apple support website for all the modems that Apple's test team has tested with. It could save a lot of grief. Even for a geek like me, I had to burn the midnight oil.
    PS: My Apple TV is now streaming the movies/tv shows/home videos from my Mac Mini smoothly. That was the reason I purchased this expensive router. And I found the "guest access" feature which I wasn't aware of. Excellent feature to let my son's friends hook up their laptops during a study/school project session without letting them access our other home computers.

    do you mean to see that the XP machine is working as a VPN server ?? if yes then you need not require to forward ports on the router...the laptop should be able to connect to the VPN server remotely ..
    if not , then connect the VPN server directly to the modem and check whether you can connect to the VPN server remotely from the router ..

  • Create user with read access for all tables SAP SID .*

    Hello all,
    could you please help me ? I would like to grant select privilege on all tables SAP<SID>.* for newly created user.
    I have created standard database user (not exclusive).
    I`m able to grant select for individual tables, but I would like to grant select for this user on all SAP<SID>
    schema in simplier way
    But as far as I know, the schema`s owner name must be different then schema name.
    Any idea please ?
    Thank you.
    Pavol

    create user <user_name> identified by <password> <options>;
    grant read on all tables:-
    CREATE OR REPLACE PROCEDURE GRANT_SELECT AS
    CURSOR ut_cur IS
    SELECT table_name
    FROM user_tables;
    RetVal NUMBER;
    sCursor INT;
    sqlstr VARCHAR2(250);
    BEGIN
    FOR ut_rec IN user_tabs_cur;
    LOOP
    sqlstr := 'GRANT SELECT ON '|| ut_rec.table_name
    || ' TO <user_name>';
    sCursor := dbms_sql.open_cursor;
    dbms_sql.parse(sCursor,sqlstr, dbms_sql.native);
    RetVal := dbms_sql.execute(sCursor);
    dbms_sql.close_cursor(sCursor);
    END LOOP;
    END grant_select;
    Edited by: varun4dba on Jan 18, 2011 4:13 PM

  • Read Only for all but creator of original file

    I need to accomplish the following:
     The goal is for us all to have access to read all the files associated with the audit. Only person posting the file should be able to modify it.
    Would this be:
    Everyone: Read/Write/Create
    Owner: Modify/Delete
    As right now they all can read/write/delete any document they would like.

    Ah, I see. I'll clarify: you're supposed to set these permissions on the topmost folder
    where your users are supposed to create files:
    This folder and subfolders:
    Everyone - Read and Execute, Create files
    Files only:
    Everyone - Read and Execute
    CREATOR OWNER - Modify
    The end result is that users can create files in that folder and all its subfolders - they cannot create folders, but they can read everything. Now, when a user creates a
    file in this folder structure, that user and that user only will automatically get Modify on that particular file (the CREATOR OWNER permission is translated to that user account in the ACL).
    An example:
    Let's say your topmost folder is D:\Data\Users. You apply the above permissions to
    this folder. Then, a user with the account name YOURDOMAIN\User1 comes along and creates the file "MyTasks.txt" in this folder. That file will then have the following permissions:
    Everyone - Read & Execute
    YOURDOMAIN\User1 - Modify
    As you can see, there is no need for any special groups. Try it out!

  • [SOLVED] /sys/class/power_supply/BAT0 reads 0 for all power files

    I'm on a Macbook 2,1 running Arch and just recently noticed that my conky started showing 2 billion % for my battery's charge. Conky simply uses:
    ${battery_percent BAT0}%
    In any case, I've manually dug around as well in /sys/class/power_supply before to figure things out and in doing so found:
    ]$ ls /sys/class/power_supply/BAT0
    alarm energy_now present type
    cycle_count manufacturer serial_number uevent
    device model_name status voltage_min_design
    energy_full power subsystem voltage_now
    energy_full_design power_now technology
    $ cat /sys/class/power_supply/BAT0/energy_full
    0
    $ cat /sys/class/power_supply/BAT0/energy_now
    0
    $ cat /sys/class/power_supply/BAT0/power_now
    0
    $ cat /sys/class/power_supply/BAT0/present
    1
    $ cat /sys/class/power_supply/BAT0/status
    Discharging
    $ cat /sys/class/power_supply/BAT0/voltage_now
    0
    These use to contain non-zero values such that (energy_now/energy_full)=% charge.
    Any suggestions on how to figure out what happened?
    Last edited by jwhendy (2012-01-18 04:49:57)

    @ManitOu:
    -- Using ${battery BAT0) gives me [charging], so it must be looking at /sys/class/power_supply/status.
    -- I didn't have acpid installed. I don't consider the battery an "event," but could be wrong. My read of the wiki is that acpid handles buttons and lid events and the like. This is simply looking for how much battery power I have. I installed acpid and started the daemon. There doesn't seem to be a change in /sys/class files or in conky's output. Do I need to restart after adding it to rc.conf for it to take effect?

  • How to fix reading mode screen in Adobe Reader XI for all PDF files

    In Adobe Reader 9.5.1 it was enough to mark this option just once.

    My current Ver is 11.0.07   and the"view all recent files" selection is found by clicking on file and in the drop down menu it is the selection just above the list of recent files

  • Read me for all OA Framework Questions

    Hi all,
    I'm trying an experiement with this thread posting. Hopefully, when people search the JDeveloper Forum for OA Framework problems, they will find this thread.
    OA Framework, also known as OAF, is a technology that is used in Oracle E-Business Suite (sometimes called EBS, Oracle ERP, Oracle Applications, etc). The tool used to develop OAF pages/customize existing ones is based upon JDeveloper (you can only download OA Framework from Metalink - it's a patch), which is why a lot of people ask about it on the JDeveloper/ADF Forum. However, the technology is so specific, that is really best to:
    ask on the [url http://forums.oracle.com/forums/forum.jspa?forumID=210]OA Framework Forum. You'll get a much better answer over there!
    Best,
    John
    Search terms included below in order to make people find it when they search ;) - I'll update this occasionally as more terms come to mind
    OAF
    OA Framework
    personalization "seeded page" R11 R12 CU2 fnd fnd.framework OAPage OAException OAPageBean DBC iExpense XMLImporter RUP4 RUP5 "advanced table" OA_JAVA OA_HTML JAVA_TOP FND_TOP HRMS "self-service page" RUP6 11.5.10 11.5.10.1 11.5.10.2 ICX_SESSION ICX_SESSION_FAILED "concurrent manager" DFF flexfield OARadioButtonBean jpximport

    push it up again...
    Timo
    Edited by: Timo Hahn on 20.07.2009 11:45
    Edited by: Timo Hahn on 27.07.2009 12:07

  • Giving a user read access to an account for all entities

    Dear All,
    We have a series of R&D accounts that a user with limited entity security needs to review for all entities.
    We have security switched on for Accounts and Entities only.
    All entites have security classes defined, only the R&D accounts have a security cless defined (all other accounts ahve a balnk security class).
    The user is not allowed to see any other accounts for the entities which they have no access to.
    is it possible in HSS to create an access path which allows a single user to view/read an account for entities which they have no other access rights to?
    Thanks.

    Hi and thanks for the response.
    The user has 2 security groups.
    The first allows them "All" access to their entity, default and the RD security class for R&D accounts.
    This group means they have read/write access to all accounts, which for their own entity is acceptable.
    If in the second group I give them read access to all entities then they can read all accounts for all entities.
    I need to stop them from seeing all accounts except the RD accounts for the other entities.
    Is this possible?

Maybe you are looking for