Read SDHC card in 10.3.9

how can i read a SDHC card in 10.3.9 G4 power book?
I try to use exress card reder, but not work
thanks

Hi, tm001. You'll need to buy a card reader whose manufacturer guarantees its compatibility with the new SDHC card standard. Many older readers and other devices that can handle 1GB and smaller SD cards easily are incompatible with SDHC cards.

Similar Messages

  • HP Photosmart C3180, is there a driver that will enable this printer to read sdhc cards

    HP Photosmart C3180 all in one printer. is there a driver that will enable this printer to read SDHC cards.

    This is a limitation of the USB hardware on the C3180 which will not read SDHC cards.
    Maximum recommended memory card size: 1 GB (solid state only)
    Please mark the post that solves your issue as "Accept as Solution".
    If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
    I am not a HP employee.

  • Does my macbook pro mid 2009 read SDHC cards in the card reader?

    does my macbook pro mid 2009 read SDHC cards in the card reader?

    If you have an SD slot on the left side of your MBP it reads SDHC cards.

  • MBA and reading SDHC cards?

    Can the mid 2011 MBA's read SDHC cards as opposed to the normal SD cards? I know the MB Pros can. It's not listed in the specs but it could have been overlooked. thanks.

    I think this may help, but note it only discusses iMacs and MacBook Pros.  No Airs.  I would guess the specs are the same though.
    http://support.apple.com/kb/HT3553

  • HT4764 can't read SDHC cards

    My MacBook Pro can't read the SDHC cards. What should I do???
    Please help me.....

    Hi
    Can you notice yellow exclamation mark in device manager?
    Normally the Satellite L40 can read SDHC cards up to 8GB so my question is have you tried different brands of SDHC cards?
    I have good experience with Kingston and SanDisk cards.
    Furthermore you should check the Toshiba website for an update of the card reader:
    http://eu.computers.toshiba-europe.com => Support & Downloads => Download Drivers
    Last but not least have you installed all Service Packs and Updates for Windows?

  • Imac failing to read SDHC card

    I cannot get my imac to read sdhc cards and any forum discussions are too old for Mountain Lion.  And I'm as up-to-date with the software as it's possible to be.
    Help!

    it should I have no problems
    it could be 1 of 2 things
    1. the card is formated with a filesystem osx don't read or write
    2. the card is corrupt and need a format

  • Lenovo G480 unable to read SDHC card

    Hi 
     I having an issue with my G480 unable to detect my SDHC card. I have install both drivers for my card reader from Support site but still unable to read my SDHC card even my camera can use the same SDHC.
    Any one have similar issue?
    Solved!
    Go to Solution.

    hi mynorkin,
    If you have the Lenovo G480 (type 2184 or 2688) as listed in this pdf data sheet, this doesn't support SDHC (Secure Digital High Capacity) as the card reader installed on these system is only a 2-in-1 reader which only supports MMC and Secure Digital Card,
    As an alternative, you can get a USB Card Reader.
    Edit: Added sample usb card reader.
    Hope this helps.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • My MacBook Pro won't read SDHC card what can i do?

    I have a MacBook Pro of 2010 running OS X Mavericks 10.9.2, when i insert my Samsung SDHC card (8Gb) it doesn't show up on finder or disck utility, but when i go to system information - card reader it shows there. When i insert my normal Samsung SD card (32Gb) it initiate with no problem... i have some pics on this card that i don't wanna loose, what can i do to fix it?

    Check and see if it's under warranty.
    https://selfsolve.apple.com/agreementWarrantyDynamic.do
    If it is, take it to the Apple store, they'll run diagnostics and replace the battery if necessary.
    If it's not under warranty and/or passes diagnostics, you may have software issue that's draining your battery, which could be solved by finding and removing the software. But I'd start with the warranty.

  • SDHC card reader in Satellite A300-1MX?

    Hi everyone,
    i bought a Toshiba Satellite A300-1MX back in October 2008, and now i wanted to buy an SDHC card, but I was wondering whether my laptop would support this "new"-ish card. The reason I want an SDHC is because it comes in bigger volumes.
    So do you know if my laptop can read SDHC cards?
    Thanks so much,
    Sincerely,
    Alex

    The Satellite Satellite A300-1MX card reader supports these cards:
    SD Card: 8MB-2GB
    SDHC Card: 4GB-16GB
    xD picture card: 16MB-2GB
    Memory Stick: 8MB-256MB
    Memory Stick Pro: 256MB-4GB
    MultiMediaCard: 8MB-2GB
    miniSD (with adapter): 32MB-2GB
    microSD (with adapter): 512MB-4GB
    Memory Stick Pro Duo(with adapter): 256MB-4GB
    As you see the SDHC is supported

  • Satellite M110 PSMBOA - Does it read 8GB or 16GB SDHC cards

    Does anyone know if this model with Windows XP home SP3 can read SDHC cards in particular 8GB or 16GB SD cards?
    Or does anyone know if there is a driver update or firmwire update that will allow this card reader to read these types of cards
    thanks

    Hi
    What does the user manual said?
    Did you check this?
    For me it looks like Toshiba Australian notebook series.
    I searched in the manual which Ive found on the Toshiba Australian page and it says that these cards are supported:
    *SD* 8MB, 16MB, 32MB, 64MB, 128MB, 256MB, 512MB, 1GB, 2GB
    *MMC* 8MB, 16MB, 32MB, 64MB, 128MB, 256MB, 512MB, 1GB
    *MS* 8MB, 16MB, 32MB, 64MB, 128MB
    *MS Pro* 256MB, 512MB, 1GB, 2GB, 4GB
    *xD* 16MB, 32MB, 64MB, 128MB, 256MB, 512MB, 1GB, 2GB
    As you see the SDHC cards are NOT supported.

  • MacBook Pro won't read Sandisk SDHC cards since Lion 10.7.1 update

    Hi all, just wondering if anyone else has had this problem. I know there are dozens of posts about SD cards not working with MacBook pros, but mine seems to have started when I installed the latest Lion update.
    I have a high-end 13" early 2011 MBP and the cards I'm having trouble with are all Sandisk 4GB SDHC. Two are 'Extreme III's" and one is an Extreme II. The card reader is showing up in System Profiler, and a really old 2GB Sandisk card gets read fine, so there doesn't seem to be anything wrong with the MBP hardware.
    Similarly, I can read the cards fine via a USB adapter, so it's not the cards that are causing the problem.
    I had successfully imported photos from the cards before upgrading to Lion, and also before installing the 10.7.1 update. So, it looks like the problem may be linked with the update, but this is purely an educated guess.
    I've tried resetting the SMC to no avail.
    Has anyone else experienced something like this?

    I've got the same problem. I've got a late 2010 MacBook Pro unibody running Mac OS 10.7.1 on it. I installed the 10.7.1 updated most likely on 8/17/11 the day after it was released by Apple. Since then I was able to read SDHC cards as I shot a number of photos and videos to my cards and they worked fine.
    I'm not sure what has changed since then, it wasn't as simple as the 10.7.1 update then it didn't work. This is the problem I'm having below, just started to experience this on 9/2/11. I tested with two 32GB SDHC cards, one 16GB SDHC card and one 2GB SD card. All cards were manufactured by Transcend.
    FAIL:
    * SDHC cards (16GB and 32GB) will not mount and isn't recognized by the MBP via the built-in SD card slot
    * SDHC cards (16GB and 32GB) will not mount and isn't recognized by the MBP via SanDisk 2.0 card reader connected via a short USB cable.
    * If I put any SDHC card into a SanDisk USB 2.0 reader that is connected to my USB hub (I gave it a try in case there was a power problem with the MBP USB system) the card is not recognized either.
    * Even Disk Utility will not see the card when inserted via built-in card slot or a reader.
    SUCCESS:
    * SD cards (2GB) mount fine when inserted either in the built-in SD card slot or via my SanDisk USB 2.0 reader.
    * If I leave the SDHC card in my camera (Canon 60D) and connect the camera to my MBP via USB I can import the images via Aperture.
    * If I put the SDHC card into the memory card slot reader of my HP inkjet printer (it has multiple card slots for different types) the card will mount normally like it is supposed to via the two failed methods above.
    I'm also sending this info to Apple but wanted to post here since there are three inconvenient work-arounds.

  • SDHC card does nor work on Satellite A200-1J0 with a clean Vista install

    Greetings,
    When I bought this notebook there was preinstalled Vista 32bit and as usual some Toshiba's drivers and software. As I remeber there was no problems with built in memory card reader, it was reading regular SD cards and also SDHC.
    One day I had to reinstall operating system (without using recovery disc) and i've downloaded drivers for my notebook from official site, installed them and the card reader now it's not able to read SDHC cards. Is it just me?
    This is what I installed for reader:
    -Toshiba Value Added Package where is TOSHIBA Flash Cards inside of it
    -Flashmedia Driver
    -SD Utilities
    I just want to highlight that there's no problem with reading mmc or normal sd cards.
    My sdhc card is 100% working properly with other card readers.
    Another sdhc card that I have is not working, it's just like I put nothing inside the reader.
    Just nothing happens.
    Is there anything else that I missed and this is the reason of my problem?
    Any fix for Vista or something like that?

    Dear Jeffrey,
    My problem is solved, thank you so much! :)
    This words were very helpful:
    "Mostly an installation instruction is placed on the Toshiba European driver page which contains the essential installation order."
    So I went on that site and found file where was written:
    Contents and Installation order
    for Windows Vista
    INSTALL ORDER
    WINDOWS VISTA
    No. Component Name Version
    1 Windows Vista RTM
    2 Intel ICH7M Chipset Utility native
    3 Intel 945GM Display Driver
    or
    3 nVIDIA G72MV-A3/NB7P-GS Display Driver
    4 Realtek ALC861D Audio Driver
    5 Realtek 10/100 8101E/ Gigabit 8111B LAN Driver
    6 Synaptics Touch Pad Driver (with LuxPad)
    7 ALPS Touch Pad Driver
    8 TI Multiple Digital Media Card Reader
    9 TOSHIBA Software Modem
    10 Intel Golan Wireless LAN Driver
    11 Intel Kedron Wireless LAN Driver
    12 Atheros Wireless LAN Driver
    13 Chicony Camera Software
    14 Bluetooth Stack for Windows by Toshiba
    15 Bluetooth Monitor
    16 TOSHIBA Value Added Package
    17 TOSHIBA Flash Cards Support Utility
    18 TOSHIBA Hardware Setup Utility
    19 TOSHIBA Supervisor Password
    20 TOSHIBA SD Memory Utilities
    21 TOSHIBA ConfigFree
    22 TOSHIBA Assist
    23 TOSHIBA Speech System
    24 TOSHIBA Extended Tiles for Windows Mobility Center V1.01
    25 TOSHIBA Fingerprint Utility V5.6.0.3221
    Thanks to that file I've found that I haven't installed "TI Multiple Digital Media Card Reader". In toshiba european download site there's nothing like that so nothing weird that I didn't find that before. Here google became a good companion and helped me to find that file. I just simply installed it without deinstaling previously installed drivers (just like is NOT written in install order above) and it's working :)
    Thank you once again!
    Best regards,
    Davit

  • SDHC cards not working anymore on Lenovo U310

    Hello,
    The integrated SD card reader of my Lenovo U310 used to work fine until a couple of months ago.
    However, now it does not read SDHC cards (it used to read them)! It reads fine standard SD cards, and also micro SDHC cards (using their adapter of course).
    My girlfriend owns my same laptop and she has no problem at all! Her laptop has always read fine SDHC cards.
    The device manager recognizes the SDHC card and if I go to “my pc” I cannot see it there unless I tick the “Hidden Items”.
    I tried to uninstall and reinstall the drivers
    Download and install the official “Alcor CardReader Driver” from the official Lenovo U310 support page
    Comparing the drivers the computer uses with the drivers on my girlfriend computer and they are identical!!
    Change the drive letter from disk management
    Format and re-installed Windows 8.1 64bits
    Nothing helped!
    Please note that if I uninstall the drivers and re-insert the SDHC card, the computer plays the sound and install the drivers, but the card remains not accessible.
    Pictures here:
    1.
    2.
    3.
    4.
    Is anybody able to help me?
    Thank you,
    Andrea

    Hello,
    Thanks for your reply.
    I have tried 2 different SDHC cards:
    1. San Disk 16GB Class 10 (30MB/s)
    2. Toshiba 16GB Class 10
    They both work on any other computer and cameras.
    I also tested them on my girlfriend's computer (she owns exaclty the same laptop that I have, Lenovo U310).
    Thus, the SDHC cards ar not faulty.
    "make sure the port isn't blocked in the Y50". What do you mena exactly?
    The reader works fine with standard SD cards, or with micro SDHC cards (using the adapter adapter).
    I tried to use some partition manager but did not work. "Please insert a disk in D: .... "
    Thanks for helping

  • T430s Smart Card reader cannot read some cards

    Hi all,
    I have a T430s with a smart card reader.
    Turns out that some cards (including, as it happens, one of my personal cards) the reader can't read. It either does not respond at all, or gives an "unknown card" identification. The very same card, on the very same laptop, using an Athena USB reader, works flawlessly.
    I'd say it's a reader malfunction BUT some other cards are read perfectly by my built-in reader... Why would the reader refuse to read certain cards?
    Any ideas? Anyone seen something like this?
    Thanks for any insight!

    Hey 127kmph,
    If the driver for the media card reader doesn't work,
    I found your computer in the personal system reference and saw you actually have no Smartcard reader. But you do have the 4-1 media card reader. Which is specific to all machine types of the T430s.
    With a little more investigating I found out that
    You have a Ricoh Multi Card Reader on the computer. This reader is able to read SDHC cards, but to get it to work fully you have to update the driver.
    Here is the link to the driver. Which this driver supports XP, Vista, and Windows 7.
    http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS014960
    Thank you NINE.
    Hope this works out for you
    Please let us know,
    Alex
    Was this or another post on the forum helpful? Click the star on the left side of the screen to give kudos! Did someone solve the problem you encountered? Click Solution Provided to let us know!
    What we Do in Life will Echo through Eternity. -Maximus Aurelius

  • Hp dv8 laptop, SDHC Cards

    Will my HP dv8 laptop be able to read SDHC cards? Or is it just capable of regular SD?
    It would be nice if this information were easy to find about HP's built-in SD card readers.

    Hello,
    Thanks for your reply.
    I have tried 2 different SDHC cards:
    1. San Disk 16GB Class 10 (30MB/s)
    2. Toshiba 16GB Class 10
    They both work on any other computer and cameras.
    I also tested them on my girlfriend's computer (she owns exaclty the same laptop that I have, Lenovo U310).
    Thus, the SDHC cards ar not faulty.
    "make sure the port isn't blocked in the Y50". What do you mena exactly?
    The reader works fine with standard SD cards, or with micro SDHC cards (using the adapter adapter).
    I tried to use some partition manager but did not work. "Please insert a disk in D: .... "
    Thanks for helping

Maybe you are looking for

  • Adobe Acrobat X Pro - Program Size

    I am trying to free up space on the C Drive of my laptop.  Looking at Control Panel/Programs and Features to see what unnecessary software I could uninstall and I noticed that Adobe Acrobat X Pro Version 10.1.11 was 6.63Gb in size.  I checked with my

  • Query builder - OR condition

    Hi, I'm new to Publisher and can't seem to fiigure out the best way to do an 'OR' condition in query builder. Any tips? For example if in regular SQL I wanted: select * from employee where empnbr is not null or empnbr > 100 Basically two conditions o

  • Running Multiple ODI Agents On The Same Server

    Is it possible to run multiple ODI Scheduler Agents simultaneously on the same Server? As we provide Work repository name in ODI params file and if we have different work repository and we want to run schedular agent on same server how can we point t

  • Pin package xmldom & xmlparse

    Hi, I am using the pl/sql-packages xmldom & xmlparse (java with pl/sql-shell) in Oracle 8.1.7. The first time I call a routine from xmldom or xmlparse it cost about 30 seconds, the next times execution is much faster. Does it help to pin these packag

  • Monitoring CAN hardware status.

    I am trying to display the status of each CAN (network and frame) object that I have configured in a C++ application. We are required to support both Series 1 and Series 2 cards. I tried to extract the status from the NC_ATTR_STATE attribute. It disp