'Read' tag and Communigate pro server

When I pick up email on my iPad and then subsequently look at my account on my PC, everything is marked as read, whether or not I have read it. In other words, the simple act of downloading all mail to my iPad seems to mark it as read on the server.
However, if I pick up mail on my PC first and then later synch the server with my iPad, everything will be marked as unread on the iPad - even if I have read it on my PC.
Changing the read status of the mail and then resynching does not seem to do any good.
My email server uses Communigate pro with a MAPI interface and SSL
This is way over my head, any thoughts or advice would be welcome

Hello.
A very similar question has also come up recently http://discussions.apple.com/thread.jspa?messageID=11356276
My reply there is only partial, but may help.
If you do have a go at migrating please post back your experiences - would be a useful contribution to general knowledge etc.

Similar Messages

  • Migrating mail from Communigate Pro to OSX Server

    Does anyone by any chance have any experience of this and can advise if there's a way to achieve it other than the obvious (create new mail accounts, get users to drag everything over folder by folder) approach?
    I have a client with Communigate Pro who recently upgraded his OSX server to 10.6 and fancies dumping Communigate and going back to Postfix.

    The power in your computer is fine.  I was just trying to warn you that if any network requests come in the server configuration immediately priorises that higher than interacting with the user sitting that the keyboard.  Apps you are using may stutter until the network request has been answered.  Of course, if you don't have many network users and with a computer that powerful, it probably won't take the server long enough to answer the network request that you notice any problem.
    No webmail portal for mail, and no easy way to add one.  Just mail apps using POP, SMTP, etc..
    Here's the manual for OS X Server if you're interested:
    https://help.apple.com/advancedserveradmin/mac/10.8/

  • Hi I have two macbook pro, i connected one from another via lan cable , now when i removed it, its showing me some pop up again and again saying server may not exists and there was a problem connecting to ishan's macbook pro

    Hi I have two macbook pro, i connected one from another via lan cable , now when i removed it, its showing me some pop up again and again saying server may not exists and there was a problem connecting to ishan's macbook pro

    If you just reboot it, does the problem go away?

  • NVDA and JAWS won't read doc in Acrobat Pro and Free Reader correctly!

    I downloaded the free trial of Adobe Acrobat Pro in order to create 508-compliant, accessible PDFs.
    I first created the doc in Word, and, using the Acrobat tab, created a PDF for accessibility purposes, and it prompted me to save it as a PDF. I entered the name and saved, and it automatically opened the PDF version of the doc in Acrobat Pro with the "Make Accessible" tool bar open on the right-hand side.
    I went through the reading order and tagged and organized everything to be in the correct order, and then I filled in the Alt Tags for images/figures. Then I had the system perform an accessibility check. It told me the tags would need to be checked manually, as do the colors, and the title was missing. (I had entered the title and source info, etc. into the document's properties, in accordance with an Adobe Acrobat article I'd read on creating accessible docs. I don't know why the title wasn't being noted.)
    I tested the doc's accessibility with the Adobe built-in reader, and it worked perfectly- everything was read in the correct order in which I'd tagged it- including the alt tags!
    When I tried opening the doc in the free Adobe Reader, however, it wasn't read at all. I then opened my screen readers (one at a time)- JAWS and NVDA- and neither one would read the document, unless I clicked the cursor on a particular part of the text, etc. I need this to read the document- in its entirety- automatically!
    Please help!!

    Finally figured it out -- if I view the form directly in Adobe Reader (over our network), I see the confusing message about "Click 'Sign' to fill out..."
    BUT, if I open the form within a web browser (IE, Firefox, etc.), I see the usual message: "Please fill out the following form. You cannot save data typed into this form. Please print..."
    It is doing what I expected; I just wasn't viewing it in the usual manner.  Users will be seeing this form via a web browser, so problem solved.

  • Episode Pro Desktop and Final Cut Server ... anyone?

    Hi everyone.
    Has anyone found a way to use Episode Pro Desktop v5 within FCS? I know that the more expensive Episode Engine is compatible with FCS, but there seems to be no reason why the desktop edition (with the Compressor plugin) shouldn't work.
    I've created a number of presets in Compressor that use the Episode plugin, and everything works fine. (I'm encoding to FLV8 and MPEG-2)
    I add those presets to FCS - but the encoding jobs just fail with the message:
    *Error: Missing destination media format*
    and
    *ERROR: EMISSINGPARAM*
    *Wrapper format missing from destination media format*
    Any ideas? It seems to be more of a problem with FCS than Episode. FCS doesn't seem to understand the format of my destination file - which is frustrating, because I don't need it to understand it - I just want it to post the job off to Compressor!
    Apple's FCS website suggests that Episode can easily extend the formats FCS can support:
    Taken from www.apple.com/finalcutserver:
    +"For even more options, you can add the Episode Pro plug-in from Telestream to encode to VC-1, WMV, GXF, and FLV formats, as well as High Profile H.264 and a number of third-party proprietary broadcast server formats."+
    I read that as "Episode Pro plug-in for Compressor" ... and not "you need to spend £4k on Episode Engine" - so it must be possible with the desktop edition ;o)
    FCServer, Episode Pro and Compressor are all running on the same machine.
    Is there something obvious I'm missing? Has anyone got this working? Does this problem also suggest that other Compressor plugins wont work with FCS?
    Thanks,
    Oliver.

    Oli,
    I understand. Keep your eye open for Snow Leopard with Quicktime X that offers [quote] "native support for all common video formats". My guess that will be MXF, WMV, various MP formats will be added along with others for portable devices. Some people disagree with me though stating that Apple would never support competitive formats. Let's see, fact is that the Pro video & broadcast industry is screaming for native MXF support (Major broadcasters are investing in MXF play-out servers) and many corporate CMS builders need WMF because ignorant executives will never understand that quicktime offers the best possibilities. They are just sitting behind their windows machines staring at their Windows Media player. I hope that Apple will at least offer people, that are smart enough to develop in a Quicktime based environment, the native support they deserve for sticking their heads out.
    By the same token, I hope that there will be a Web App soon for review & approve purposes.

  • Soundtrack Pro and Final Cut Server....can you check-in/check-out?

    Hello!
    Just curious how the workflow is with Soundtrack Pro and Final Cut Server. We haven't used Soundtrack Pro, but have been thinking about it for Surround Sound projects.

    You can check in anything into FCSvr, any type of project file or media file. Unlike checking in/out a Final Cut Pro project, with any other application, you'll need to check out the project file for that app, and manually check out all the media associated with it. Many folks will simply set up the STP, or Motion, or InDesign, or Illustrator project and it's associated media all into the same folder on their workstation. Then check in/out that folder as a "bundled asset". This makes a zip file in FCSvr that holds all of those needed files together. When you check it out, it's unzipped and places on your local workstation. When you check back in, FCSvr re-zips it and replaces the original on it's RAID storage drive.

  • I downloaded an upgrade to my adobe reader today, and ever since my search engine has switched to yahoo and wont change back to google. I have a macbook pro, help please? Does anyone know how I can change this back? I have tried through my settings but it

    I downloaded an upgrade to my adobe reader today, and ever since my search engine has switched to yahoo and wont change back to google. I have a macbook pro, help please? Does anyone know how I can change this back? I have tried through my settings but it doesnt work

    Hi Timia,
    If you are using Safari as a web browser :-
    Open Safari, go to Safari menu > Preferences > General, and put Google as the homepage. Then, choose Google as your default search engine.
    If you are using Google Chrome as the web browser :-
      Open Google Chrome.
      In the top right corner of the page, click the Chrome menu Chrome menu > Settings.
      In the "Search" section, select Google from the drop-down menu.
    Let me know if you still experience any issue.
    Regards,
    Aadesh

  • Adobe Reader and Acrobat Pro updates for 11.0.10 being pushed out through SolarWinds Patch Manager are not being recognized as applicable.

    I am trying to update our Adobe Reader and Acrobat Pro to 11.0.10 using the default MSP packages with SolarWinds Patch Manager.  All of the systems keep reporting as 'NOT APPLICABLE'.  All of the workstations have Reader11.0.09, with about 10% still on 11.0.08 (due to the fact that the reader 11.0.09 package only patched about 2/3 of the systems).  All systems that have Acrobat Pro are 11.0.09.
    In SolarWinds I am using the "Adobe Systems, Inc. Packages" node.
    Adobe Systems Acrobat 11 Catalog
    Adobe Systems Reader 11 Catalog
    and the SW Patch Manager downloads the msp's straight from Adobe.
    I have checked the msp's manually and they will update at least back to 11.0.07 in Reader, and 11.0.0 in Acrobat Pro. (I had an old stand alone system that still had Reader 11.0.07, and I did a new install of Pro and went straight to update 11.0.10)
    The SolarWinds Tech said, "Okay. That content is produced by Adobe. Any questions concerning applicability logic or diagnosing why a package reports as NotApplicable when that's not expected would need to be directed to Adobe, as they are solely responsible for that content and its behavior".
    I am new to SolarWinds Patch Manager, and any help or advice would be greatly appreciated.

    It sounds like you are attempting to use the SCUP catalogs outside of the MS solution.  I can almost guarantee you that Adobe didn't test it if it's not referenced in the ETK:  11   SCCM-SCUP — Enterprise Administration Guide
    That being said there "should" be logging available in any deployment solution.   Since I am not familiar with Solar-Winds particular solution I can't say if it logs errors and how verbose those logs might be.    If you have logs then post the output and the forum members "might" be able to assist you.

  • How do I download Adobe Reader to my MacBook Pro?  I have tried 8 times used advice and it says contact software people who don't work on weekends/ can't read my bank statement which is in pdf!

    How do I download Adobe Reader to my MacBook Pro?  I have tried 8 times at least.  Error message says contact software people.  They don't work on weekend.  I am leaving tomorrow
    and need to read pdf files.  I can't even read my bank statement.  I tried the advice given online and it didn't work either.  Please help. patc1776 at [email protected]

    You can try using the full offline Reader installer from
    http://get.adobe.com/reader/enterprise/

  • Itunes does not read id3 tags and its a problem

    Ok I have 60 gig of music and all of it is labeled correctly in id3 tags. But when i add them all to itunes some of the songs are blank with no information at all but if i go into "show in explorer" the information in the id3 tags instantly pops up. I'v searched google and found nothing so i hope someone can tell me a fix or another program to use that will organise my music like itunes does and also can put music on my ipod. So please help me with the problem.
    Thanks

    It doesn't work. I'v already tried that. I'v even tried converting the id3 tags and then removing them from the libray and adding them again. Still nothing. It might help if someone could tell me where itunes gets it information for its tags when you add music to its libray seeing as it doesn't use id3 tags for the information like any smart program does.

  • How do I set up my Mac mini to read iTunes and iPhoto files from my new Mac mini server?

    Want my old Mac mini to read iPhoto and iTunes files from my new Mac mini server.  Old Mac has no more room to store files.  How do I do this?

    Hello,
    Have you tried enabling iTunes Sharing & iPhoto Sharing on the Server?
    Or maybe...
    http://support.apple.com/kb/ht1449
    http://www.apple.com/itunes/inside-itunes/2011/02/how-to-move-your-itunes-librar y-to-another-hard-drive.html
    http://support.apple.com/kb/PH2506
    http://support.apple.com/kb/ht1229

  • What are the commands available to read a file from application server and

    What are the commands available to read a file from application server and store the file into an internal table?

    Hi,
    To read a file from an Application Server to an Object there is a command in ABAP called <b>READ DATASET</b>. After that file is transported to that object you have to do a loop and put that data in an Internal Table.
    This statement exports data from the file specified in dset into the data object dobj. For dobj, variables with elementary data types and flat structures can be specified. In Unicode programs, dobj must be character-type if the file was opened as a text file.
    For dset, a character-type data object is expected - that is, an object that contains the platform-specific name of the file. The content is read from the file starting from the current file pointer. After the data transfer, the file pointer is positioned after the section that was read. Using the MAXIMUM LENGTH addition, the number of characters or bytes to be read from the file can be limited. Using ACTUAL LENGTH, the number of characters or bytes actually used can be determined.
    In a Unicode program, the file must be opened with an arbitrary access type; otherwise, an exception that cannot be handled will be triggered.
    If the file has not yet been opened in anon-Unicode program, it will be implicitly opened as a binary file for read access using the statement
    OPEN DATASET dset FOR INPUT IN BINARY MODE.
    . If a non-existing file is accessed, an exception that can be handled can be triggered.
    Influence of Access Type
    Files can be read independently of the access type. Whether data can be read or not depends solely on the position of the file pointer. If the latter is at the end of the file or after the file, no data can be read and sy-subrc will be set to 4.
    Influence of the Storage Type
    The import function will take place irrespective of the storage type in which the file was opened with the statement OPEN DATASET.
    If the file was opened as a text file or as a legacy text file, the data is normally read from the current position of the file pointer to the next end-of-line marking, and the file pointer is positioned after the end-of-line marking. If the data object dobj is too short for the number of read characters, the superfluous characters and bytes are cut off. If it is longer, it will be filled with blanks to the right.
    If the file was opened as a binary file or as a legacy-binary file, as much data is read that fits into the data object dobj. If the data object dobj is longer than the number of exported characters, it is filled with hexadecimal 0 on the right.
    If the specified storage type makes conversion necessary, this is executed before the assignment to the data object dobj. Afterwards, the read data is placed, byte by byte, into the data object.
    System Fields
    sy-subrc Meaning
    0 Data was read without reaching end of file.
    4 Data was read and the end of the file was reached or there was an attempt to read after the end of the file.
    Thanks,
    Samantak.
    <b>Rewards points for useful answers.</b>

  • Reading XML file from application server and  put into internal table-4.6C

    Dear All,
    Is there any way of reading XML file from application server to SAP? I am using 4.6C. Function module SCMS_STRING_TO_XSTRING function module is not available. Please suggest.
    Thanks and regards,
    Atanu

    Hi Atanu!
    Simply use the XSLT transformation 'ID'.
    FIELD-SYMBOLS <ls_result> TYPE ANY.
    CREATE DATA lref_data TYPE (your_structure).
    ASSIGN lref_data->* TO <ls_result>.
    CALL TRANSFORMATION id
                        SOURCE XML xmlstr
                        RESULT result = <ls_result>.
    "xmlstr" contains your XML file. Just read it into it via standard I/O operations. "<ls_result>" will contain your DDIC formatted content.
    Best regards
    Torsten

  • Adobe Reader, X Standard and X Pro 64 bits version

    Hi,
    I would like to ask a quick question. Do we have 64 bits version for Adobe Acrobat Reader, X Standard and X Pro?
    Thanks,

    Quick answer: Not for MS Windows.

  • What is the difference btwn Reader and Acrobat Pro?

    Hello,
    My Requirement in broader sense: I am developing an VISITOR Info. Adobe Interactive Form, i have Designer 8.1 and Reader 9.0 in my Windows 7 Laptop. When i checked the menu EDIT-->form properties --> Compatability, its Adobe XML form File (XDP)
    When i opened this VISITOR interactive form in a browser, right clicking and checked form PROPERTIES, then i saw the "PDF Version: 1.6 (Acrobat 7.x)" (pls. let me know what is the correct forum for me to post my questions)
    My 1 sub-set of my Requirement: Front desk guy want to open this VISITOR Info form and enters addresss details + attaches some ID proof photo copy of JPEG format + Writes some COMMENTS in the form
    Pls. let me know
    1) is my software inventory is enough to go ahead and develop a interactive form (as mentioned VISITOR Info)? or do i need any more software?
    2) I saw Acrobat Pro version 10.x.......do i need this softaware as well to get my requirement done (VISITOR Info)?
    3) What is the difference between Reader 9.0 and Acrobat Pro 10.x?
    Thank you

    Thank you.
    Yes, here am confusing! If i create the forms with Acrobat, then, why do i need LiveCycle designer?
    Pls. let me      know what do you mean "Create forms", is it like writing a letter/some text like MicroSoft word doc and finally saving it on our local machine/desktop?
    THank you

Maybe you are looking for