Read TAX Value in PO

Dear All,
I have an issue, I want to read tax value from PO.
I can read the tax percentage, but not the value.
Is there any table where from I can read the tax value? Or any function.
Regards
H P Singh

Dear Friend,
You are right, but I want to read condition type value which are displayed in Tax Procedure.
By Calculate_Line_Item we can read total tax value whcih display below Net Value.
My requirement is to read line items in Tax procedure. Like I want to read condition value of J1TX in tax procedure.
Thanks & Regards
H P Singh.

Similar Messages

Tax value is not picked up correctly for the condition type in SO creation

Hi All,
I have a issue in Picking up Tax value correctly for the condition type in SO Creation.
Actual Issue:
When creating the sales order manually,
tax value is picked up correctly for one condition type: ISS3.
When the Sales Order is created via Idoc using the function module 'idoc_input_orders', tax value is not picked for same condition type: ISS3.
We need to find out why the value for the condition type 'ISS3' is not picked in this way!
Can anybody solve this issue!
What can be the reason which is stopping picking up tax value for condition type: ISS3 when Sales Order is created via F.M 'IDOC_INPUT_ORDERS'! While it picked up the same while creating Sales Order manuallly.
Thanks in advance.
Thanks,
Deep.

Hi All,
Can anybody give the solution for above posted issue!
Working:
When creating the sales order manually,
tax value is picked up correctly for the condition type ISS3.
Actual Issue:
When the Order is created via Idoc using the function module 'idoc_input_orders',
tax value is not picked .
I need to find out why the value for the condition type 'ISS3' is not picked.
I have debugged the issue from WE19 but upto Conditions tab it is picking up tax value but then it is becoming zero again it remains zero after saving SO.
But Manually tax value is picked up for condition type ISS3 and remains same after saving order.
I have debugged it several times fro WE19 but not able to find route cause for the issue.
What can be the issue over here!
Can anybody give me solution for the same!
Thanks in advance.
Thanks,
Deep.

Function Module to read tax in FB60

Hi Gurus,
Is there a function module that reads the values in the folder "taxes" (tax amount) during the recording FB60?
I need something similar to function module FI_WT_GET_X_WITH_ITEM.
Thanks
Nik

Hi Nocola,
Try using this Function Module CALCULATE_TAX_FROM_NET_AMOUNT.
Thanks and Regards
Rinzy Deena Mathews

Change amount and tax values in Dunning

Hello,
i need to customize amount or tax value in Dunning, in transaction FBMP.
Does anyone know some user-exit or other way to do this?
Thanks
Maria

hi Maria,
Give more information.
You have the possibility to add a fixed charge (or a %) by dunning level (Tcode FBMP) or you can calculate interest by post (Tcode OB42). What's amount do you want to change ?

How to read enumerated values from an OPC server via Datasocket

Hi Labviewers,
I am using LV8.2 and I am trying to find if it is possible to read enumerations from an OPC server via Datasocket, not just the values.
I can successfully read a value for an OPC server via Datasocket and I get a value for example 3, is it possible to get the enumeration/string that corresponds to this value i.e. "Open".
Many thanks in advance
Dimitris

Hi Sarah,
With the input type as variant I get the following response:
1                                     <-This is the current numeric value of the parameter
4 Attribute(s):
   'Quality' -> 192
   'TimeHigh' -> 29861723
   'TimeLow' -> -665408304
   'Timestamp' -> 39.238E+3
With the Input set to         Enum constant I get no values or strings coming back. With the Input set to             Ring constant I just get the numeric value
Dimitris

How to read all values of a queue

Hi All,
In Message mapping I am checking condition for field value based on incoming value.
In test cases i can see the second or third occurence is getting supressed and first value fails the condition and mapping node not created.
I would like to know how to read multiple values from queue and check condition for each value and if correct value present condition should pass.
I tried all possible context changes but no luck.
Any ideas how to read all values coming .
Thanks.

<?xml version="1.0" encoding="UTF-8"?>
<msg version="" dbName="">
   <rowOp isLast="" cmitLSN="" cmitTime="" authID="" correlationID="" planName="">
      <updateRow subName="" srcOwner="" srcName="" intentSEQ="" rowNum="" hasLOBCols="">
         <col name="END_RSN_CDE" isKey="852369" invalidData="" rawData="">
            <smallint>
               <beforeVal invalidData="" rawData=""/>
               <afterVal invalidData="" rawData=""/>
            </smallint>
            <date>
               <beforeVal invalidData="" rawData=""/>
               <afterVal invalidData="" rawData=""/>
            </date>
            <char>
               <beforeVal invalidData="" rawData=""/>
               <afterVal invalidData="" rawData=""/>
            </char>
         </col>
         <col name="SVC_USER_SDT" isKey="789654" invalidData="" rawData="">
            <smallint>
               <beforeVal invalidData="" rawData=""/>
               <afterVal invalidData="" rawData=""/>
            </smallint>
            <date>
               <beforeVal invalidData="" rawData=""/>
               <afterVal invalidData="" rawData=""/>
            </date>
            <char>
               <beforeVal invalidData="" rawData=""/>
               <afterVal invalidData="" rawData=""/>
            </char>
         </col>
      </updateRow>
   </rowOp>
</msg>

Problem reading RFC values from IRecordSet !!!!

Hi All,
I am having some problem reading values from IRecordSet. Can not seem to parse the output structure from RFC. AM using connector gateway service to execute BAPI_EXCHRATE_GETCURRENTRATES.
Here is the code,
MappedRecord input = rf.createMappedRecord("input");
input.put("DATE",new String("01011990"));
input.put("DATE_TYPE", new String("V"));
input.put("RATE_TYPE", new String("M"));
MappedRecord output = (MappedRecord) ix.execute(ixspec, input);
Object rs = null;
IRecordSet recSet = null;
Object result = output.get("EXCH_RATE_LIST");
if (result == null) {
response.write("<BR>null");
rs = new String(" ");
} else if (result instanceof IRecordSet) {
IRecordSet irs = (IRecordSet) result;
response.write("<BR>Got some dataaa");
IRecordMetaData rsmd = null;
rsmd = irs.retrieveMetaData();
irs.beforeFirst();
while(irs.next()){
response.write("Row::"+irs.getString("RATE_TYPE")+" "+irs.getString("FROM_CURR")+" "+irs.getString("EXCH_RATE"));
Am getting the pritn statement, Got Some Data on the PDK component.
But somehow not able to read the values from IRecordSet
What is the mistake here?
Pls help
Edited by: Aakash Jain on Oct 11, 2008 12:22 AM

Hi
Try in this way.
IRecordSet resultTable = (IRecordSet)outputParams.get("TABLE_NAME");
for(resultTable.beforeFirst(); resultTable.next(); ) {
response.write(resultTable.getString(0));
response.write(resultTable.getString(1));
Thanks

Short dump in reading selection values in Report

Hi all,
I have created a Navegational Attributte and added this Info Object in the existing Query and for this object we have created Charactistics Value Variable with Uesr Entry.
But, When we use input selection option to select a vlaue for this Variable in the Variable Selection Screen it is trying to read the values and going into short Dump but for other variables Selection option is working fine.
Please anyone help me if you have the solution.
Regards,
Ali.

Hi,
Try deleting the master data and reload the master data again and check for the selection variables. Check the short dump in ST22 it will say which master table ie SID table or master table where the join fails.
Thanks,
Arun

Determine/read the value of parameter rdisp/max_wprun_time within ABAP

Hi,
I need to avoid program breaks caused by exceeding run time longer than defined in parameter rdisp/max_wprun_time.
I will check the time since start of report in the critcal loop to bring the current data changes to a controlled end before getting a program break. I won't put a constant to the report, I will have a dynamical routine to avoid changes of report if the value of parameter rdisp/max_wprun_time will be changed.
But how can I get the value of this parameter within my ABAP report? Is there a table where this value has been stored? Is there an existing function module or a method to read the value?
Thank's a lot in advance!
Georg

The runtime parameter (GET RUN TIME ) can be used to dynamically get the program run time
DATA T TYPE I.
GET RUN TIME FIELD T.
WRITE: / 'Runtime', T.
or
U probably can store the start date and time in TVARV with some variable ( line concatenate program name + START Date + Time)
and then use
SD_DATETIME_DIFFERENCE
or
SD_CALC_DURATION_FROM_DATETIME
Regards,
Mithun Shetty

Conditions in Purchase Order - No scroll bar/Sales Tax value not in mmr

Hello,
I am stuck in a weird problem where I have created a Condition Calculation Schema, assigned it to Schema group and assigned that schema to vendor, but when i open my condition in the PO, it does not give me scroll bar i.e. I have calculation Schema with around 10+ conditions, but when I try to put all the conditions in PO at one time, the scroll bar doesnot come up and without it, I cannot view all my conditions in the PO. Its saving the conditions though as seen in report, but cannot display it in PO without the scroll bar. Any ideas?
Another assignment is that sales tax value and % should not increase the mmr value at time of GR, but when I do GR its adding the sales tax value to mmr value, my requirement is just Gross price be added to mmr, not sales tax value/%. I tried the Statistical checks in Calculation Schema, but to no vail, at GR the sales tax value is being added to the mmr record. Any ideas?
Lots of points awarded for answer/answers.
Any clue will help
Thank you/Afshad
Edited by: Afshad Irani on Jan 14, 2009 10:27 AM
Edited by: Afshad Irani on Jan 14, 2009 2:32 PM
Edited by: Afshad Irani on Jan 15, 2009 6:19 AM

Q Another assignment is that sales tax value and % should not increase the mmr value at time of GR.
Ans:
Dear Afshad,
Reference to your question, you need to do few settings in your Condition Type and Pricing Schema, if you need Sales Tax value & % not to include in your Material value.
1 - In SPRO, Check that in your condition type, Control data 2 tab, Accruals check box should not be selected.
2 - In your Calculation Schema, against your condition types for Sales Tax % and Sales Tax Value, select the check box for Manual & Statistics.
3 - Also in your Calculation Schema, you should not select any account key in AccKey (Account Key) and in Accruals colomns.
If any one of these setting is not defined, the valuation price for your material will be increased due to the fact that your settings for Condition type and Calculation Schema is allowing the same to hit the value of your material directly.
Hope it works for you.
Regards
Jibran

Function Module to Read attributes value from Classification tab

Dear Experts ,
We are using material classification in the material master. Under classification tab of material master , we are maintaining certain characteristics and their corresponding values.
I want to read those values and use those in one of the report.
Can you please help me in identifying Function Module which will return the values of all the attributes of that material.
Thanks in advnce,
Regards,
Nikhil

You can check those details using CT06 transaction.
FM CLAF_CLASSIFICATION_OF_OBJECTS can be used to retrive the data using program.
    CALL FUNCTION 'CLAF_CLASSIFICATION_OF_OBJECTS'
      EXPORTING
        class              = gc_class
        classtext          = 'X'
        classtype          = gc_classtype
        clint              = gc_mmpsk
        features           = 'X'
        language           = sy-langu
        object             = l_object
        key_date           = sy-datum
        initial_charact    = 'X'
        change_service_clf = ' '
        inherited_char     = 'X'
      TABLES
        t_class            = lt_class
        t_objectdata       = lt_objectdata
      EXCEPTIONS
        no_classification = 1
        no_classtypes      = 2
        invalid_class_type = 3
        OTHERS             = 4.

How to read the value of a field belonging to a different context node in GET_I method during runtime

I want the read the value of a field,'LCSTATUS' belonging to context node 'BTADMINH' in the GET_I method of the field, 'ZZFLD000008' belonging to context node,'ZBTACTIVITYH'.
In the context node class of context node 'ZBTACTIVITYH',I have created an instance attribute,GR_OWNER type ref to context class.
I get the following error in the line - lv_act_status = Lr_entity->if_bol_bo_property_access~GET_PROPERTY_AS_STRING( 'LCSTATUS' ).
'An exception (CX_CRM_CIC_PARAMETER_ERROR) occurred Message no. TPDA430'
I have used the below code.
method GET_I_ZZFLD000008.
     DATA: current TYPE REF TO if_bol_bo_property_access,
           lv_act_status TYPE string.
     DATA:lr_entity TYPE REF TO cl_crm_bol_entity,
           lr_current TYPE REF TO if_bol_bo_property_access,
          lr_parent TYPE REF TO cl_crm_bol_entity.
     rv_disabled = 'TRUE'.
     if iterator is bound.
       current = iterator->get_current( ).
     else.
       current = collection_wrapper->get_current( ).
     endif.
CHECK gr_owner IS BOUND.
lr_entity ?= gr_owner->btadminh->collection_wrapper->get_current( ).
CHECK lr_entity IS BOUND.
lv_act_status = Lr_entity->if_bol_bo_property_access~GET_PROPERTY_AS_STRING( 'LCSTATUS' ). "error states that lcstatus can't be used here.
   TRY.
         IF current->is_property_readonly(
                       'ZZFLD000008' ) = abap_false. "#EC NOTEXT
           rv_disabled = 'FALSE'.
         ENDIF.
     CATCH cx_sy_ref_is_initial cx_sy_move_cast_error
           cx_crm_genil_model_error.
       RETURN.
   ENDTRY.
endmethod.

Hi,
LCSTATUS is not an attribute of the BTADMINH structure. It is read using the relation to the status object
BTADMINH-> BTHeaderStatusSet-> BTStatusHCurrent-> ACT_STATUS.
Try reading the ACT_STATUS of object BTStatus as given below.
        data: coll   type ref to if_bol_entity_col.
       data: entity type ref to cl_crm_bol_entity,
                     lv_act_status TYPE string.
       entity ?= current.                                                               "BTADMINH entity.
       coll = entity->get_related_entities(
                iv_relation_name = 'BTHeaderStatusSet' ).    "#EC NOTEXT
       current = coll->get_current( ).
        entity ?= current.
       coll = entity->get_related_entities(
                iv_relation_name = 'BTStatusHCurrent' ).     "#EC NOTEXT
       current = coll->get_current( ).
        try.
       lv_act_status = current->if_bol_bo_property_access~GET_PROPERTY_AS_STRING( 'ACT_STATUS' ).
         catch cx_crm_cic_parameter_error.
       endtry.
Regards JP

How to read the value of Inputfield in WAD in JAVA script?

Hi Experts,
I have a requirement in WAD .
I have put an Input Field (text box), a button and a script control in the web template.
In my script control function , I want to read the value entered in the input field using java script. How do I achieve it?
Thanks in advance.
Regards
akshay

Hi,
To do this, first you may want to view the HTML source of the report. So, when you have the report launched with the input field, right click and select View Source. Usually it is under a <span> tag with id something like sapbi_snippet_YOURWEBITEMNAME. Most useful commands here are document.getElementById and document.getElementsByTagName.
You can also access the input web item value using standard sap command SET_SELECTION_STATE_BY_BINDING. Take a look at the documentation on this.
Hope the above helps.
Regards,
wira

Selecting one cursor at a time and then reading its value

I am a novice LabView user. I am trying to develop a program in which I have to select portions of a waveform and delete the outliers. The problems I run into is selecting cursors at a time and then reading its value. I was using Active Cursor. Ideally what I need is to read read values of the first two cursors, cursor0 and cursor1 and remove outliers in the region and then move to region between cursor1 and cursor2 and so on. Is there a way to control which cursors are active, read its value and then move to the next set.

Hi binc,
I have attached a VI that should remove outliers. This may not be the best way to do it, but it is one possibility.
Thanks,
Paul B.
Motion Control R&D
Attachments:
Remove_outliers.vi ‏20 KB

Hiding a table column and its contents yet reading the values

Hi all,
hope someone can help as i urgently need a solution for this although its probably more of a javascript and html forms question than a JSP - but i couldnt find a good javascript forum - if any one has come across a good JS and HTML - i would appreciate if you would let me have a url for it - in the meantime as i need this urgentely and most JS sites that i have visted and posted on seem to be useless, i havent got a reply back yet , and since i've always found java sun forum good and helpful thought would post it here - hope no one minds it too much . Thanks in advance for any help with resolving my urgent problem.
overview of question:
I need to, using an onclick() event read the contents of the 4th cell in the clicked row and set the value of a hidden element � (not sure what element to use here attribute tag? Or some other - but basically, this needs to also be hidden, as I�m going to use this as one of the parameters to send through as part of the form - )
explanation of question
So when I do :-
<td><netui:label value="{container.item.TELECARERID}"/></td> And using javascript :-
row.cells[4].innerText;I can read the value and print it to screen as :-
alert('row.cells[4].innerText)) = ' + row.cells[4].innerText);although at this stage I�m not sure how to now set this value to an element in the form so that I can include this value as part of the submit action of the form.
However when I do the following, which is closer to what I�m trying to achieve (ie hide the 4th column of the table and its values � but when I just hide the value as in:-
<td><netui:hidden dataInput="{container.item.TELECARERID}" dataSource="" /></td> I can�t use the above (row.cells[4].innerText;), javascript syntax to get to the value although the value is still in the viewsource of the html page.
How can I hide this forth column of the table yet get the values of the 4th column and also set it to some element of the form so that it can be submitted with the date range as part of a criteria to search against by the backend server.
the full code (well... relevant parts)
Here is all the code:
<table id="table1" class="tablebody" border="1">
        <tbody>
         <tr>
           <th><rpb:columnHeader field="FIRSTNAME"><i18n:getMessage messageName="first_name"/></rpb:columnHeader></th>
           <th><rpb:columnHeader field="LASTNAME"><i18n:getMessage messageName="last_name"/></rpb:columnHeader></th>
          <th><rpb:columnHeader field="LOGONNAME"><i18n:getMessage messageName="logon_name"/></rpb:columnHeader></th>
          <th><rpb:columnHeader field="TEAM"><i18n:getMessage messageName="team"/></rpb:columnHeader></th>
           <th><rpb:columnHeader field="TELECARERID"><i18n:getMessage messageName="telecarer_id"/></rpb:columnHeader></th>
        </tr>
       </netui-data:repeaterHeader>
       <netui-data:repeaterItem>
        <tr bgcolor="#FFFFFF" onMouseOver="this.bgColor='gold';" onMouseOut="this.bgColor='#FFFFFF';" onclick="selectTeleCarer(this)">
        <td><netui:label value="{container.item.FIRSTNAME}"/></td>
          <td><netui:label value="{container.item.LASTNAME}"/></td>
         <td><netui:label value="{container.item.LOGONNAME}"/></td>
       <td><netui:label value="{container.item.TEAM}"/></td>
        <td><netui:label value="{container.item.TELECARERID}"/></td>
       </tr>
      </tbody>///////and then I�m trying to using the below sepertaely printed javascript set it to the below hidden attribute so that it can be submitted as part of the form
<netui:hidden tagId="teleCarerId" dataSource="{actionForm.teleCarerId}" dataInput=""/>
                             <div>
                         <i18n:getMessage messageName="created_between"/>
                            <netui:textBox tagId="data" dataSource="{actionForm.fromDate}"/>
                            <button id="trigger" onclick="jscalendar/calendar.js">...</button>
                           <i18n:getMessage messageName="and"/>
                            <netui:textBox tagId="data1" dataSource="{actionForm.toDate}"/>
                            <button id="trigger2" onclick="jscalendar/calendar.js">...</button>
                        </div>
                <br />
                <netui:button value="Submit" type="submit"/>
            </netui:form>/// the java script is :-
function selectTeleCarer(row)
    if ( row.style ) {
row.style.backgroundColor = ('gold' == row.style.backgroundColor)?
'white' : 'gold';
//document.form.teleCarerId.value = row.cells[4].innerText;
alert('row.cells[4].innerText)) = ' + row.cells[4].innerText);
}

thanks for the reply,
but i cant use just html like <input type hidden > as i'm using the struts like framework with the netui tags in weblogic where i need to link the tag value to the form bean to be passed to the server . thus i need to use the netui tag , which doesnt have a name but a tagId instead, so i'm using it like this :
<netui:hidden tagId="teleCarerId" dataSource="{actionForm.teleCarerId}" dataInput=""/>and then in javascrpit doing:
//document.form.teleCarerId.value = row.cells[4].innerText;but thats not my problem ()as it probably will work and its only an issue after i resolve the first part of my question:-
which is how do i hide a cloumn in a table and its values so that when the user selects a row i can pass the hidden value of row as part of my form .
as i mentioned before when i make the cloumn visible as in
<th><rpb:columnHeader field="TELECARERID"><i18n:getMessage messageName="telecarer_id"/></rpb:columnHeader></th>and give it a visible value:
<td><netui:label value="{container.item.TELECARERID}"/></td>
       </tr>i can pick up the value fine using the javascript syntax:
row.cells[4].innerText;however when i hide only the value - which is only part of what i want to do as i want to also hide the column heading so that this part of the table isnt seen- as in:-
<td><netui:hidden dataInput="{container.item.TELECARERID}" dataSource="" /></td>then i cant use
row.cells[4].innerText;to pick up the value although it does hide the value and in viewsourec the value is there - is there some other syntax that i should be using here - and also how can i hide the cloumn heading so that the table looks asthtically good on the browser?
ie. what should i change this line of code to?
<th><rpb:columnHeader field="TELECARERID"><i18n:getMessage messageName="telecarer_id"/></rpb:columnHeader></th>thanks in advance for any help.

Read TAX Value in PO

Similar Messages

Maybe you are looking for