Read text file (ASCII), tab separated

how to read contens of text file (ASCII), tab separated in a report.

hi kailash,
                To read contents of text files (Ascii) use GUI_UPLOAD function.
GUI_UPLOAD - this FM will Upload the Data of a text File to ITAB.
Please see below the code for it.It is very simple ,plz go through it.
In the code when u call the function GUI_UPLOAD just mention the file type as 'ASCII' as done below.
pls do reward if useful.
Thanks.
types: begin of ttab,
       f1(25) type c,
       f2(10) type c,
       f3(10) type c,
       end of ttab.
data: itab type table of ttab with header line.
data: file_str type string.
parameters: p_file type localfile.
at selection-screen on value-request for p_file.
call function 'KD_GET_FILENAME_ON_F4'
    EXPORTING
      static    = 'X'
    CHANGING
      file_name = p_file.
start-of-selection.
file_str = p_file.
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      FILENAME                      = file_str
    FILETYPE                      = 'ASC'
   HAS_FIELD_SEPARATOR           = 'X'
HEADER_LENGTH                 = 0
READ_BY_LINE                  = 'X'
DAT_MODE                      = ' '
CODEPAGE                      = ' '
IGNORE_CERR                   = ABAP_TRUE
REPLACEMENT                   = '#'
CHECK_BOM                     = ' '
VIRUS_SCAN_PROFILE            =
IMPORTING
FILELENGTH                    =
HEADER                        =
    TABLES
      DATA_TAB                      = itab
   EXCEPTIONS
     FILE_OPEN_ERROR               = 1
     FILE_READ_ERROR               = 2
     NO_BATCH                      = 3
     GUI_REFUSE_FILETRANSFER       = 4
     INVALID_TYPE                  = 5
     NO_AUTHORITY                  = 6
     UNKNOWN_ERROR                 = 7
     BAD_DATA_FORMAT               = 8
     HEADER_NOT_ALLOWED            = 9
     SEPARATOR_NOT_ALLOWED         = 10
     HEADER_TOO_LONG               = 11
     UNKNOWN_DP_ERROR              = 12
     ACCESS_DENIED                 = 13
     DP_OUT_OF_MEMORY              = 14
     DISK_FULL                     = 15
     DP_TIMEOUT                    = 16
     OTHERS                        = 17.
*IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
*ENDIF.
Loop at itab.
    write : / itab-f1,itab-f2,itab-f3.
endloop.

Similar Messages

Create text file (ASCII), tab separated and load in sap (transaction al11)

hi..
i need to create a text file (ASCII), tab separated in sap which can be viewed in transaction AL11.
thank you.

Hi kailashl,
Do intend to create a tab delimited file through program. or is it that you wish to diretly place the file on the application server.
PS: if you wish to place the file which you have on the application server from presentation you use the tcode CG3Z, you need to give the source file path on the front end and target path on the application.
If you wish to write the file onto the app server using program that you can do using dataset. and for tab delimited u can use CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB.
PS: Award points ONLY if the solution was useful to you.

Uploading into database table from text file using tab (GUI_UPLOAD)

i have small doubt
i have 3 fiels in text file using tab as separator
i need to update into database table 'ZABPSP_01'
from 's.txt' located in local disk.
My code is below.
Please let me know the correction.
Awaiting for ur response.
Thanks in advance
REPORT ZABPSPPRG_02.
TABLES: LFA1,MARA,KNA1,ZABPSP_01.
DATA: begin of itab occurs 0,
IKUNNR type zabpsp_01-kunnr,
IMATNR type zabpsp_01-matnr,
IADRNR type zabpsp_01-adrnr.
DATA:END OF ITAB.
DATA: FILENAME1 TYPE STRING.
FILENAME1 = 'C:/s.txt'.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
    FILENAME                      = FILENAME1
FILETYPE                      = 'ASC'
   HAS_FIELD_SEPARATOR           = 'X'
HEADER_LENGTH                 = 0
READ_BY_LINE                  = 'X'
DAT_MODE                      = ' '
CODEPAGE                      = ' '
IGNORE_CERR                   = ABAP_TRUE
REPLACEMENT                   = '#'
CHECK_BOM                     = ' '
VIRUS_SCAN_PROFILE            =
NO_AUTH_CHECK                 = ' '
IMPORTING
FILELENGTH                    =
HEADER                        =
TABLES
    DATA_TAB                     = itab.
EXCEPTIONS
FILE_OPEN_ERROR               = 1
FILE_READ_ERROR               = 2
NO_BATCH                      = 3
GUI_REFUSE_FILETRANSFER       = 4
INVALID_TYPE                  = 5
NO_AUTHORITY                  = 6
UNKNOWN_ERROR                 = 7
BAD_DATA_FORMAT               = 8
HEADER_NOT_ALLOWED            = 9
SEPARATOR_NOT_ALLOWED         = 10
HEADER_TOO_LONG               = 11
UNKNOWN_DP_ERROR              = 12
ACCESS_DENIED                 = 13
DP_OUT_OF_MEMORY              = 14
DISK_FULL                     = 15
DP_TIMEOUT                    = 16
OTHERS                        = 17
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF sy-subrc EQ 0.
zabpsp_01-kunnr = ITAB-IKUNNR.
zabpsp_01-matnr = ITAB-IMATNR.
zabpsp_01-adrnr = ITAB-IADRNR.
WRITE : / ' UPLOAD SUCCESS ' .
ENDIF.
\[subject changed, don't write everything in upper case!\]
Edited by: Jan Stallkamp on Aug 6, 2008 2:39 PM

Hi,
After upload modify the code like below. Also change the file name as some one suggested already. If u are still facing problems then check in debug mode what is happening after FM call.
CALL GUI_UPLOAD FM.
IF sy-subrc EQ 0
IF NOT itab[] IS INITIAL.
MODIFY ZABPSP_01 FROM TABLE itab.
WRITE : / ' UPLOAD SUCCESS ' .
ELSE.
WRITE 'No data in file'.
ENDIF.
ELSE.
WRITE 'Upload failure'.
ENDIF.
Thanks,
Vinod.

How to read text file efficiently?

I use CharBuffer to read text file:
private List<String> load() throws IOException {
        final String B = "<BODY>";
        final String E = "</BODY>";
        List<String> docs = new ArrayList<String>();
        for (File file : files) {
            FileReader reader = new FileReader(file);
            CharBuffer buffer = CharBuffer.allocate(BSIZE);
            StringBuilder sb = new StringBuilder();
            while (reader.read(buffer) != -1) {
                char[] dst = new char[buffer.length()];
                buffer.get(dst);
                sb.append(dst);
                buffer.clear();
            String s = sb.toString();
            System.out.println(file + ": " + s.length());
            int start = 0;
            int i, j;
            while ((i = s.indexOf(B, start)) != -1) {
                j = s.indexOf(E, i + B.length());
                docs.add(s.substring(i + B.length(), j));
                start = j + E.length();
                //System.out.printf("%d %d %d%n", i, j, start);
        return docs;
    }The file size is 1324350, but the code say it is 772802.
What's wrong with this code?
I want to read text file as quickly as possible.
Is this code the right way to read file?
Should I use FileReader or nio Channel and ByteBuffer?
Any suggestions are welcome!

You are reading the file as if it were encoded in UTF-16. Each character uses two bytes so you have half the number of characters as you had bytes.
The following code reads an entire file in one hit.
    public static String readText(File file) throws IOException {
        byte[] bytes = new byte[(int) file.length()];
        DataInputStream dis = new DataInputStream(new FileInputStream(file));
        try {
            dis.readFully(bytes);
        } finally {
            dis.close();
        return new String(bytes, "UTF-8"); // or whatever your file encoding is.
    }But you can still have less characters than bytes if there are any non ASCII-7 characters.

Reading text file to JEditorPane

Hi,
I'm trying to read text file to JEditorPane and it works but first line is always missing. Here is the code for reading:
try {
   in = new BufferedReader(new FileReader(filePathIn));
   while ((lineIn = in.readLine()) != null) {
        editorPane.read(in, new Object());
} catch (IOException ie)...Any suggestions?

in.readLine is changing the input stream position.
Do this instead:
FileInputStream in = new FileInputStream(filePathIn);
while (in.available() != 0)
    editorPane.read(in, new Object());

In 10g read text files

i am not able to read text file in 10g forms. using webutil.pll and webutil.lib
here i posted the code . i am not getting message 2, client_text_io.fopen is not working what could be the reason.
DECLARE
in_file client_TEXT_IO.FILE_TYPE;
V_LINE_COUNT number;
linebuf VARCHAR2(1800);
V_var1 varchar2(80);
V_var2 varchar2(80);
V_var3 varchar2(80);
V_var4 varchar2(80);
V_var5 varchar2(80);
filename VARCHAR2(30);
l_var number;
blnRet BOOLEAN;
begin
     DELETE FROM NIRU_TEMP;
:file_path:=LTRIM(RTRIM(:file_path));
MESSAGE('1');
in_file := client_text_io.fopen(UPPER(:file_path),'r');
MESSAGE('2');
loop
V_LINE_COUNT := V_LINE_COUNT + 1;
client_text_io.get_line(in_file,linebuf);
MESSAGE('5');
V_var1 := substr(linebuf,1,(instr(linebuf,',')-1)) ;
MESSAGE('6'||V_VAR1);
MESSAGE('6'||V_VAR1);
l_var := length(v_var1);
V_var2 := substr(linebuf,l_var+2,(instr(linebuf,','))) ;
--V_var3 := substr(linebuf,15 ,10 );
V_var2 :=LTRIM(RTRIM(V_var2));
MESSAGE('6'||V_var2);
MESSAGE('6'||V_var2);
:p_id := v_var1;
:p_desc :=v_var2;
--IF V_var2 = '' THEN
--V_var3 :='';
--else
--V_var3 := TO_NUMBER(V_var2) ;
--end if;
--V_var5 := substr(linebuf,26 ,70 );
INSERT INTO NIRU_TEMP VALUES (V_var1,V_var2);
client_text_io.new_line;
:System.Message_Level := '20';
commit;
:System.Message_Level := '0';
--<<end_loop>>
--null;
next_record;
end loop;
client_TEXT_IO.FCLOSE(in_file);
exception
     WHEN OTHERS THEN
     MESSAGE('ERROR'||SQLCODE||' '||SQLERRM);
--exit;
end;

Hello Francois,
You have a solution for this problem?
I have a problem like this. While reading a text file, such as size of 7MB, long, between 15-30 minutes.
See...
declare
     arq client_text_io.file_type;
     linha varchar2(800);
     v_total number := 0;
     v_icms number := 0;
begin
:valor_total := 0;
:valor_icms := 0;
     arq := client_text_io.fopen(:arquivo,'r');
     loop
     client_text_io.get_line(arq,linha);
     if substr(linha,1,1) = '1' then
          v_total := v_total + (to_number(substr(linha,302,13))/100);
          v_icms := v_icms + (to_number(substr(linha,262,13))/100);
     end if;
     end loop;
     client_text_io.fclose(arq);
     exception
          when no_data_found then
          :valor_total := v_total;
          :valor_icms := v_icms;
          message('Realizado com sucesso!');
          message('Realizado com sucesso!');
end;

How to read text file content in portal application?

Hi,
How do we read text file content in portal application?
Can anyone forward the code to do do?
Regards,
Anagha

Check the code below. This help you to know how to read the text file content line by line. You can display as you require.
IUser user = WPUMFactory.getServiceUserFactory().getServiceUser("cmadmin_service");
IResourceContext resourceContext = new ResourceContext(user);
String filePath = "/documents/....";
RID rid = RID.getRID(filePath);
IResource resource = ResourceFactory.getInstance().getResource(rid,resourceContext);
InputStream inputStream = resource.getContent().getInputStream();
BufferedReader reader = new BufferedReader(new InputStreamReader(inputStream));
String line = reader.readLine();
while(line!=null) {
line = reader.readLine();
//You can append in string buffer to get file content as string object//
Regards,
Yoga

How can I read text files from LAN if I only know the hostname?

I'm new in Java Developing, and dont know the written classes yet. I need help, how to do the following steps?
<p>1. How can I read text files from LAN if I only know the hostname, or IP address?
<p>2. How to read lines from text files without read all lines from the beginning of file, just seek to a position.
(ex. how can I read the 120th line?)
<p>Please help!
<p>sorry for the bad english

I'm new in Java Developing, and dont know the written classes yet. I need help, how to do the following steps?
1. How can I read text files from LAN if I only know the hostname, or IP address?You need to know the URL of the file. You need to know the hostname, port, protocl and relative path.
The hostname is server, not file.
2. How to read lines from text files without read all lines from the beginning of file, just seek to a position.Use the seek() to get to a random byte.
(ex. how can I read the 120th line?)The only way to find the 120th line is to read the first 120 lines. You can use other file formats to find the 120th line without reading the whole file but to need to be able to detremine where the 120th line is

How to read text file contain chinese character ?

Hi XI Expert,
I have scenario to read text file contain Chinese Character using sender file adapter. but every i was check from sxmb_moni all the chinese character looks different. and also the target file also i has changes.
Please advise me how to maintaine the chinese character in PI 7.0 SP17.
Thank You and Best Regards
Fernand

Hi,
Refer these threads..
Receiver file adapter corrupting characters
Problem in converting special characters in input text file
Here is one more useful guide..
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/502991a2-45d9-2910-d99f-8aba5d79fb42
Regards,
Sarvesh
Edited by: Sarvesh Singh on Nov 17, 2008 3:47 PM

Need to read text file content and have to display it in multiline text box

dear all,
Need to read text file content and have to display it in multiline text box.
actually im new to file handling. i have tried up to get_line and put_line.
in_file := TEXT_IO.FOPEN ('D:\SAMPLE.txt', 'r');
TEXT_IO.GET_LINE (in_file,linebuf);
i dont know how to assign this get_line function to text item
pls help me in this regards,

Simply write:
in_file := TEXT_IO.FOPEN ('D:\SAMPLE.txt', 'r');
TEXT_IO.GET_LINE (in_file,linebuf);
:block2.t1 := chr(10)||:block2.t1||chr(10)||linebuf;
chr(10) --> is for new line character

Read text file insert into table using utl_file

Hi
i have script for read and insert into table but i want error records load into error table so i sent you my script and please fix the error log table
script
DECLARE
v_line VARCHAR2(2000);
v_file utl_file.file_type;
v_dir VARCHAR2(250);
v_filename VARCHAR2(50);
BEGIN
v_dir :='MID5010_DOC1TP';
v_filename := 'OPT_CM_BASE.txt';
v_file := utl_file.fopen(v_dir, v_filename, 'r');
LOOP
BEGIN
utl_file.get_line(v_file, v_line);
EXCEPTION
WHEN no_data_found THEN
EXIT;
END ;
v_line := REPLACE(v_line,'|','|~');
INSERT
INTO optum_icd10cm_base VALUES
( REPLACE(TRANSLATE(regexp_substr(v_line,'[^|~]+',1,1),'a~','a'),'.'),
TRANSLATE(regexp_substr(v_line,'[^|~]+',1,2),'a~','a'),
TRANSLATE(regexp_substr(v_line,'[^|~]+',1,3),'a~','a'),
TRANSLATE(regexp_substr(v_line,'[^|~]+',1,4),'a~','a'),
TRANSLATE(regexp_substr(v_line,'[^|~]+',1,5),'a~','a'),
CASE
WHEN LENGTH(regexp_substr(v_line,'[^|~]+',1,6)) < 10
THEN to_date(ltrim(TRANSLATE(regexp_substr(v_line,'[^|~]+',1,6),'a~','a'),'0'),'mm-yyyy')
ELSE to_date(TRANSLATE(regexp_substr(v_line,'[^|]+',1,6),'a~','a'),'mm-dd-yyyy')
END,
CASE
WHEN LENGTH(regexp_substr(v_line,'[^|~]+',1,7)) < 10
THEN to_date(ltrim(TRANSLATE(regexp_substr(v_line,'[^|~]+',1,7),'a~','a'),'0'),'mm-yyyy')
ELSE to_date(TRANSLATE(regexp_substr(v_line,'[^|]+',1,7),'a~','a'),'mm-dd-yyyy')
END,
CASE
WHEN LENGTH(regexp_substr(v_line,'[^|~]+',1,8)) < 10
THEN to_date(ltrim(TRANSLATE(regexp_substr(v_line,'[^|~]+',1,8),'a~','a'),'0'),'mm-yyyy')
ELSE to_date(TRANSLATE(regexp_substr(v_line,'[^|]+',1,8),'a~','a'),'mm-dd-yyyy')
END,
CASE
WHEN LENGTH(regexp_substr(v_line,'[^|~]+',1,9)) < 10
THEN to_date(ltrim(TRANSLATE(regexp_substr(v_line,'[^|~]+',1,9),'a~','a'),'0'),'mm-yyyy')
ELSE to_date(TRANSLATE(regexp_substr(v_line,'[^|]+',1,9),'a~','a'),'mm-dd-yyyy')
END,
CASE
WHEN LENGTH(regexp_substr(v_line,'[^|~]+',1,10)) < 10
THEN to_date(ltrim(TRANSLATE(regexp_substr(v_line,'[^|~]+',1,10),'a~','a'),'0'),'mm-yyyy')
ELSE to_date(TRANSLATE(regexp_substr(v_line,'[^|]+',1,10),'a~','a'),'mm-dd-yyyy')
END,
TRANSLATE(regexp_substr(v_line,'[^|~]+',1,11),'a~','a')
-----commit;
END LOOP;
utl_file.fclose(v_file);
END;
text file
A50.0||Short|Long|Full|01-01-2009|01-2009||01-01-2013|09-18-2012|C|
A50.1||Short|Long|Full|01-01-2009|01-01-2009||001-2013|09-18-2012|C|
A50.2||Short|Long|Full|01-01-2009|01-01-2009|67|01-01-2013|09-18-2012|C|
A50.3||Short|Long|Full|011-2009|01-01-2009||01-01-2013|09-18-2012|C|
A50.4||Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|5|
A50.5|R|Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
A50.6||Short|Long||01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
A50.7||Short||Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
2345||Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
A60.0|N|Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
A60.1|N|Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
A60.2|N|Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
A60.3|N|Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
A60.4|N|Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
A60.5|N|Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
A60.6|N|Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
A60.7|N|Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
A60.8|N|Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
A60.9|N|Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
A70.0|N|Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
A70.1|N|Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
A70.2|N|Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
A70.3|N|Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
A70.4|N|Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
B222|N|Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
A4.1|N|Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
A4.2|N|Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
A4.3|N|Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
A4.4|N|Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
A4.5|N|Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
A4.6|N|Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
A4.7|N|Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
A4.8|N|Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
A4.9|N|Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
A5.0|N|Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
A5.1|N|Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
A5.2|D|Short|Long|Full|01-01-2009|01-01-2009|01-10-2013|01-01-2013|09-18-2012|C|
A5.3|D|Short|Long|Full|01-01-2009|01-01-2009|01-10-2013|01-01-2013|09-18-2012|C|
D642|D|Short|Long|Full|01-01-2009|01-01-2009|01-10-2013|01-01-2013|09-18-2012|C|
A5.5|D|Short|Long|Full|01-01-2009|01-01-2009|01-10-2013|01-01-2013|09-18-2012|C|
A5.6|D|Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
A5.7|C|Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
A001|C|Short Updated|Long Updated|Full Updated|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
A009|C|Short Updated|Long Updated|Full Updated|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
A5.10|C|Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
A0109|C|Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
F10.0|N|Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
F10.1|N|Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
F10.2|N|Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
F10.3|N|Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
F10.4|N|Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
F10.5|N|Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
F10.6|N|Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
F10.7|N|Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
A30|C|Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
A316|C|Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
A317|C|Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
----clearly read text file insert into table and error records load into error table
please help me

hI
i am using utl_file prepared script but i got error like 01861. 00000 - "literal does not match format string"
script:
DECLARE
f utl_file.file_type;
s VARCHAR2(32000);
f1 VARCHAR2(100);
f2 varchar2(100);
F3 VARCHAR2(100);
F4 VARCHAR2(100);
F5 VARCHAR2(100);
F6 DATE;
F7 DATE;
F8 DATE;
F9 DATE;
F10 DATE;
f11 CHAR(1);
BEGIN
--DBMS_OUTPUT.ENABLE(100000);
f := utl_file.fopen('MID5010_DOC1TP', 'OPT_CM_BASE.txt', 'R');
LOOP
BEGIN
UTL_FILE.GET_LINE(f, s);
f1 := REGEXP_SUBSTR (s,'[^|]+',1,1);
f2 := REGEXP_SUBSTR (REPLACE(s,'||','||'),'[^|]+', 1,2);
F3 := REGEXP_SUBSTR (REPLACE(s,'||','||'),'[^|]+', 1,3);
F4 := REGEXP_SUBSTR (REPLACE(s,'||','||'),'[^|]+', 1,4);
F5 := REGEXP_SUBSTR (REPLACE(s,'||','||'),'[^|]+', 1,5);
F6 := to_date(REGEXP_SUBSTR (REPLACE(s,'||','||'),'[^|]+',1,6),'mm-dd-yyyy');
F8 := to_date(REGEXP_SUBSTR (REPLACE(s,'||','||'),'[^|]+',1,8),'mm-dd-yyyy');
F7 := to_date(REGEXP_SUBSTR (REPLACE(s,'||','||'),'[^|]+',1,7),'mm-dd-yyyy');
F9 := to_date(REGEXP_SUBSTR (REPLACE(s,'||','||'),'[^|]+',1,9),'mm-dd-yyyy');
F10 :=to_date(REGEXP_SUBSTR (REPLACE(s,'||','||') ,'[^|]+',1,10),'mm-dd-yyyy');
f11 := REGEXP_SUBSTR (REPLACE(s,'||','||'),'[^|]+', 1,11);
INSERT
INTO OPTUM_ICD10CM_BASE
( CODE,
STATUS,
SHORT_DESCRIPTION,
LONG_DESCRIPTION,
FULL_DESCRIPTION,
CODE_EFFECTIVE_DATE,
CHANGE_EFFECTIVE_DATE,
TERMINATION_DATE,
RELEASE_DATE,
CREATION_DATE,
VALIDITY
VALUES
F1,
F2,
F3,
F4,
F5,
F6,
F7,
F8,
F9,
F10,
f11
EXCEPTION
WHEN NO_DATA_FOUND THEN
EXIT;
END;
END LOOP;
UTL_FILE.FCLOSE(F);
END;
please help me(in my org looks utl_file standards only)

Can I save and read text files on a server that I host?

Hello everyone,
I am a java hobbiest. I was wondering if I set up my own server, running out of my house, could I have my applets save to my computer and read from my computer without having to learn JDBC and a DATABASE language. In other words could i just have my applet save and read text files from and to my server?
I'm trying to set up a sight for my 5th grade class where parents can log into. Thanks for your time.
Oh yeah, which is easier, learning how to set up a server or learning JDBC and a DATABASE language?
If you have any other good idease please tell me them
Thank you, Bryan

Short answer: This isn't gonna work
Long answer: For this to work, the first thing you're going to need is a static IP address and a DNS name registered -actually you don't necessarily need #2 but you're probably gonna want it and it's by far the easier of the steps.
As far as I know to get a fixed IP address you've either gotta be directly attached to a larger network (ie university network) or get a leased line from an ISP.
Once you've got that done come back to us.

If possible 2 read text files in nokia 6070 mobile...

i have nokia 6070 mobile.i want 2 save & read my text files.if possible 2 read text files in nokia6070 mobile?

Yes it is possible by installing a java based app.
You can find some here.

Read text file and insert into MySQL

Dears,
I need to read text file and then insert the data in the correct column in the MySQL database
example
I have the following text file:
field1=1234 field2=56789 field3=444555
field1=1333 field2=2222 field3=333555
and so on and so forth ,,note that all rows are identical and just the filed value is changed(there is a dilemeter between fields)
how can I read field1,field2 and field3 from text file and insert them in the correct table and column in the database.....
any help?????
thanks for your cooperation
Best Regars

Sure.
Which part don't you understand?
1. Reading a text file
2. Parsing the text file contents.
3. Relational databases and SQL.
4. How to create a database.
5. How to connect to a database in Java.
6. How to insert records into the database in Java.
7. How to map Java objects to records in a database.
This is a pretty nice list. Solve complex problems by breaking them into smaller ones.
%

How to create and read text file using LabVIEW 7.1 PDA module?

How to create and read text file using LabVIEW 7.1 PDA module? I can not create a text file and read it.
I attach my code here.
Attachments:
File_IO.vi ‏82 KB

Well my acquisition code runs perfect. The problem is reading it. I can't seem to read my data no matter what I do. My data gets saved as a string using the array to string vi but I've read that the string to array vi (which I need to convert back to array to read my data) does not work on the pda. I'm using version 8.0. So I was trying to modify the program posted in this discussion so that it would save data from my DAQ. I did that but I still can't read the data after its saved. I really don't know what else to do. All I need to do is read the data on the pda itself. I can't understand why I'm having such a hard time doing that. I found a possible solution on another discussion that talks about parsing the strings because of the bug in the "string to array" vi. However, that lead me to another problem because for some reason, the array indicators or graphs don't function on the pda. When i build the program to the pda or emulator, the array indicators are faded out on the front panel as if the function is not valid. Does this kind of help give a better picture of what I'm trying to do. Simply read data back. Thanks.

Read text file (ASCII), tab separated

Similar Messages

Maybe you are looking for