Read text file in Flash

How to read text file flash memory

Use the 'more' command. Here is a console log showing it in use -
VG202#dir flash:
Directory of flash:/
1 -rw- 18955952 Mar 1 2002 00:19:50 +00:00 vg20x-ipvoice-mz.124-22.T.
bin
128843776 bytes total (109887488 bytes free)
VG202#copy run flash:Myconfig.txt
Destination filename [Myconfig.txt]?
1593 bytes copied in 0.392 secs (4064 bytes/sec)
VG202#dir flash:
Directory of flash:/
2 -rw- 1593 Mar 6 2002 19:28:26 +00:00 Myconfig.txt
1 -rw- 18955952 Mar 1 2002 00:19:50 +00:00 vg20x-ipvoice-mz.124-22.T.
bin
128843776 bytes total (109883392 bytes free)
VG202#
VG202#more flash:Myconfig.txt
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname VG202
boot-start-marker
boot-end-marker
logging message-counter syslog
enable password cisco
no aaa new-model
ip source-route
ip cef
no ipv6 cef
stcapp ccm-group 1
stcapp
stcapp feature access-code
stcapp feature speed-dial
stcapp call-control mode feature
voice-card 0
archive
log config
hidekeys
interface FastEthernet0/0
ip address 10.66.75.41 255.255.255.0
duplex auto
speed auto
interface FastEthernet0/1
no ip address
shutdown
duplex auto
speed auto
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 10.66.75.1
no ip http server
control-plane
voice-port 0/0
timeouts initial 60
timeouts interdigit 60
timeouts ringing infinity
voice-port 0/1
ccm-manager fax protocol cisco
ccm-manager config server 10.66.90.130
ccm-manager config
ccm-manager sccp local FastEthernet0/0
ccm-manager sccp
mgcp fax t38 ecm
sccp local FastEthernet0/0
sccp ccm 10.66.75.212 identifier 2 version 6.0
sccp ccm 10.66.75.211 identifier 1 version 6.0
sccp
sccp ccm group 1
associate ccm 1 priority 1
associate ccm 2 priority 2
dial-peer voice 1 pots
service stcapp
port 0/0
dial-peer voice 10 pots
shutdown
destination-pattern 10
port 0/1
dial-peer voice 11 pots
shutdown
destination-pattern 11
port 0/0
line con 0
no modem enable
line aux 0
line vty 0 4
password cisco
login
exception data-corruption buffer truncate
end
VG202#

Similar Messages

Reading text files in Flash Lite.

Hello, I was wondering how to load a txt file and display the contents in a scrolling text field. Some of the given examples require the text file to be uploaded to a server but I do not wish to do that. Kindly help. Thanks.

DrLaszloJamf wrote:
t.s wrote:
Try this
try {
File toRead = new File("C://somefile.txt");
BufferedReader reader = new BufferedReader(new FileReader(toRead));
String line = null;
while ((line = reader.readLine()) != null) {
System.out.println(line);
reader.close();
} catch (FileNotFoundException e) {
// TODO Auto-generated catch block
e.printStackTrace();
} catch (IOException e) {
// TODO Auto-generated catch block
e.printStackTrace();
Why do people catch the FileNotFoundException exception separately?For me it's a personal preference, I don't think there is anything wrong with using just IOException. I think if that's the case, then there is nothing wrong with catching just "Exception".
Edit: ...and I'm lazy. Eclipse does that for me ;)
Edited by: t.s on Jun 18, 2008 8:19 AM

High Score Table: Writing a Simple Text File with Flash and PHP

I am having a problem getting Flash to work with PHP as I need Flash to read and write to a text file on a server to store simple name/score data for a games hi score table. I can read from the text file into Flash easily enough but also need to write to the file when a new high score is reached, so I need to use PHP to do that. I can send the data from flash to the php file via POST but so far it is not working. The PHP file is confirmed as working as I added an echo to the file which displayed a message so I could check that the server was running PHP - the files were also uploaded to a remote server so I could test them properly. Flash code is as follows:
//php filewriter
var myLV = new LoadVars();
function sendData() {
//sets up variable 'hsdata' to send to php
myLV.hsdata = myText;
myLV.send("hiscores.php");
I believe this sends the variable 'myText' to the php file as a variable called 'hsdata' which I want the php file to write into a text file. The mytext variable is just a long string that has all the scores and names in the hiscore. OK, XML would be better way of doing this but for speed I just want to get basic functionality working, so storing a simple text sting is adequate for now. The PHP code that reads the Flash 'hsdata' variable and writes it to the text file 'scores.txt' follows:
<?php
//assigns to variable the data POSTed from flash
$flashdata = $_POST["hsdata"];
//file handler opens file and erases all contents with w arg
$fh = fopen("scores.txt","w");
//adds data to file
fwrite ($fh,$flashdata);
//closes file
fclose ($fh);
echo 'php file is working';
?>
Any help with this would be greatly appreciated - once I can get php to write simple text files I should be ok. Thanks.

Thanks for your help.
I have got Flash working to a certain extent with PHP using loadVars but have been unable to get flash to receive a variable declared in PHP. Here's my Flash code:
var outLV = new LoadVars();
var inLV = new LoadVars();
function sendData() {
outLV.hsdata = "Hello from Flash";
outLV.sendAndLoad("http://www.mysite.com/hiscores/test23.php",inLV,"post");
inLV.onLoad = function(success) {
if (success) {
//sets dynamic text box to show variable sent from php
statusTxt.text = phpmess;
} else {
statusTxt.text = "No Data Received";
This works ok and the inLV.onLoad function reports that it is receiving data but does not display the variable received from PHP. The PHP file is like this:
<?php
$mytxt =$_POST['hsdata'];
$myfile = "test23.txt";
$fh = fopen($myfile,'w');
//adds data to file
fwrite($fh, $mytxt);
//closes file
fclose ($fh);
$mess = "hello there from php";
echo ("&phpmess=$mess&");
?>
The PHP file is correctly receiving the hsdata from flash and writing it to a text file, but there seems to be a problem with the final part of the code which is intended to send a variable called 'phpmess' back to Flash, this is the string "hello there from php". How do I set up Flash and PHP so that PHP can send a variable back to Flash using echo? Really have tried everything but am totally baffled. Online tutorials have given numerous different syntax configurations for how the PHP file should be written which has really confused me - any help would be greatly appreciated.

Loading text file with flash lite 3.0 problem

Hello,
I recently ran into a problem with loading a plain text file with Flash Lite 3.0.
I know there is a way to load name/value pairs using LoadVars class or XML file using XML class. Both methods work great, but these classes parse the data loaded and I need to load just a plain text - no pairs or xml structure. (its because Im loading specific file format, so I can't make any changes to it)
There is a simple way how to achieve this in Flash using Actionscript 2 by extending the LoadVars class and overriding the onData() method. I used it plenty of times and it works fine.
There is an example of implementation:
// the PlainData.as file
class PlainData extends LoadVars {
    function onData(str) {
        trace(str)
        this.onLoad(true);
// now in the main file
var my_data:PlainData = new PlainData();
my_data.load("my3dmodel.obj");
This code traces unchanged content of my3dmodel.obj file.
The problem comes when I try to run this code using Flash Lite 3.0. The code stops working just by changing player version in publish settings to Flash Lite 3.0. It doesnt display any error, but also doesnt trace any content.
Is there a reason why you cant override onData method in LoadVars class in lite version of flash or am I doing something wrong?
(also overriding onLoad() method works fine in Flash Lite)
Ondrej

Thanks Man
But i m very unhappy !!! :-(
1M data to transfer my mp3 files is very small !!! hehehe
Thanks a lot
See ya
Carlos Eduardo Burko - Curitiba - Brazil - Macromedia
Certified Professional
"biskero" <[email protected]> escreveu na
mensagem
news:e98nrb$a6e$[email protected]..
> Ciao Carlos,
>
> yes you can load mp3. The only issue is that the FL2
will need to load the
> entire mp3 in memory which mean you are limited to the
avalable memory and
> also
> there is a limitation of 1M data transfer.
> Try to create a sample application to test it. You need
to use the
> loadSound
> API.
>
> Alessandro
>

Reading text file to JEditorPane

Hi,
I'm trying to read text file to JEditorPane and it works but first line is always missing. Here is the code for reading:
try {
   in = new BufferedReader(new FileReader(filePathIn));
   while ((lineIn = in.readLine()) != null) {
        editorPane.read(in, new Object());
} catch (IOException ie)...Any suggestions?

in.readLine is changing the input stream position.
Do this instead:
FileInputStream in = new FileInputStream(filePathIn);
while (in.available() != 0)
    editorPane.read(in, new Object());

In 10g read text files

i am not able to read text file in 10g forms. using webutil.pll and webutil.lib
here i posted the code . i am not getting message 2, client_text_io.fopen is not working what could be the reason.
DECLARE
in_file client_TEXT_IO.FILE_TYPE;
V_LINE_COUNT number;
linebuf VARCHAR2(1800);
V_var1 varchar2(80);
V_var2 varchar2(80);
V_var3 varchar2(80);
V_var4 varchar2(80);
V_var5 varchar2(80);
filename VARCHAR2(30);
l_var number;
blnRet BOOLEAN;
begin
     DELETE FROM NIRU_TEMP;
:file_path:=LTRIM(RTRIM(:file_path));
MESSAGE('1');
in_file := client_text_io.fopen(UPPER(:file_path),'r');
MESSAGE('2');
loop
V_LINE_COUNT := V_LINE_COUNT + 1;
client_text_io.get_line(in_file,linebuf);
MESSAGE('5');
V_var1 := substr(linebuf,1,(instr(linebuf,',')-1)) ;
MESSAGE('6'||V_VAR1);
MESSAGE('6'||V_VAR1);
l_var := length(v_var1);
V_var2 := substr(linebuf,l_var+2,(instr(linebuf,','))) ;
--V_var3 := substr(linebuf,15 ,10 );
V_var2 :=LTRIM(RTRIM(V_var2));
MESSAGE('6'||V_var2);
MESSAGE('6'||V_var2);
:p_id := v_var1;
:p_desc :=v_var2;
--IF V_var2 = '' THEN
--V_var3 :='';
--else
--V_var3 := TO_NUMBER(V_var2) ;
--end if;
--V_var5 := substr(linebuf,26 ,70 );
INSERT INTO NIRU_TEMP VALUES (V_var1,V_var2);
client_text_io.new_line;
:System.Message_Level := '20';
commit;
:System.Message_Level := '0';
--<<end_loop>>
--null;
next_record;
end loop;
client_TEXT_IO.FCLOSE(in_file);
exception
     WHEN OTHERS THEN
     MESSAGE('ERROR'||SQLCODE||' '||SQLERRM);
--exit;
end;

Hello Francois,
You have a solution for this problem?
I have a problem like this. While reading a text file, such as size of 7MB, long, between 15-30 minutes.
See...
declare
     arq client_text_io.file_type;
     linha varchar2(800);
     v_total number := 0;
     v_icms number := 0;
begin
:valor_total := 0;
:valor_icms := 0;
     arq := client_text_io.fopen(:arquivo,'r');
     loop
     client_text_io.get_line(arq,linha);
     if substr(linha,1,1) = '1' then
          v_total := v_total + (to_number(substr(linha,302,13))/100);
          v_icms := v_icms + (to_number(substr(linha,262,13))/100);
     end if;
     end loop;
     client_text_io.fclose(arq);
     exception
          when no_data_found then
          :valor_total := v_total;
          :valor_icms := v_icms;
          message('Realizado com sucesso!');
          message('Realizado com sucesso!');
end;

How to read text file content in portal application?

Hi,
How do we read text file content in portal application?
Can anyone forward the code to do do?
Regards,
Anagha

Check the code below. This help you to know how to read the text file content line by line. You can display as you require.
IUser user = WPUMFactory.getServiceUserFactory().getServiceUser("cmadmin_service");
IResourceContext resourceContext = new ResourceContext(user);
String filePath = "/documents/....";
RID rid = RID.getRID(filePath);
IResource resource = ResourceFactory.getInstance().getResource(rid,resourceContext);
InputStream inputStream = resource.getContent().getInputStream();
BufferedReader reader = new BufferedReader(new InputStreamReader(inputStream));
String line = reader.readLine();
while(line!=null) {
line = reader.readLine();
//You can append in string buffer to get file content as string object//
Regards,
Yoga

How can I read text files from LAN if I only know the hostname?

I'm new in Java Developing, and dont know the written classes yet. I need help, how to do the following steps?
<p>1. How can I read text files from LAN if I only know the hostname, or IP address?
<p>2. How to read lines from text files without read all lines from the beginning of file, just seek to a position.
(ex. how can I read the 120th line?)
<p>Please help!
<p>sorry for the bad english

I'm new in Java Developing, and dont know the written classes yet. I need help, how to do the following steps?
1. How can I read text files from LAN if I only know the hostname, or IP address?You need to know the URL of the file. You need to know the hostname, port, protocl and relative path.
The hostname is server, not file.
2. How to read lines from text files without read all lines from the beginning of file, just seek to a position.Use the seek() to get to a random byte.
(ex. how can I read the 120th line?)The only way to find the 120th line is to read the first 120 lines. You can use other file formats to find the 120th line without reading the whole file but to need to be able to detremine where the 120th line is

How to read text file contain chinese character ?

Hi XI Expert,
I have scenario to read text file contain Chinese Character using sender file adapter. but every i was check from sxmb_moni all the chinese character looks different. and also the target file also i has changes.
Please advise me how to maintaine the chinese character in PI 7.0 SP17.
Thank You and Best Regards
Fernand

Hi,
Refer these threads..
Receiver file adapter corrupting characters
Problem in converting special characters in input text file
Here is one more useful guide..
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/502991a2-45d9-2910-d99f-8aba5d79fb42
Regards,
Sarvesh
Edited by: Sarvesh Singh on Nov 17, 2008 3:47 PM

Need to read text file content and have to display it in multiline text box

dear all,
Need to read text file content and have to display it in multiline text box.
actually im new to file handling. i have tried up to get_line and put_line.
in_file := TEXT_IO.FOPEN ('D:\SAMPLE.txt', 'r');
TEXT_IO.GET_LINE (in_file,linebuf);
i dont know how to assign this get_line function to text item
pls help me in this regards,

Simply write:
in_file := TEXT_IO.FOPEN ('D:\SAMPLE.txt', 'r');
TEXT_IO.GET_LINE (in_file,linebuf);
:block2.t1 := chr(10)||:block2.t1||chr(10)||linebuf;
chr(10) --> is for new line character

Read text file insert into table using utl_file

Hi
i have script for read and insert into table but i want error records load into error table so i sent you my script and please fix the error log table
script
DECLARE
v_line VARCHAR2(2000);
v_file utl_file.file_type;
v_dir VARCHAR2(250);
v_filename VARCHAR2(50);
BEGIN
v_dir :='MID5010_DOC1TP';
v_filename := 'OPT_CM_BASE.txt';
v_file := utl_file.fopen(v_dir, v_filename, 'r');
LOOP
BEGIN
utl_file.get_line(v_file, v_line);
EXCEPTION
WHEN no_data_found THEN
EXIT;
END ;
v_line := REPLACE(v_line,'|','|~');
INSERT
INTO optum_icd10cm_base VALUES
( REPLACE(TRANSLATE(regexp_substr(v_line,'[^|~]+',1,1),'a~','a'),'.'),
TRANSLATE(regexp_substr(v_line,'[^|~]+',1,2),'a~','a'),
TRANSLATE(regexp_substr(v_line,'[^|~]+',1,3),'a~','a'),
TRANSLATE(regexp_substr(v_line,'[^|~]+',1,4),'a~','a'),
TRANSLATE(regexp_substr(v_line,'[^|~]+',1,5),'a~','a'),
CASE
WHEN LENGTH(regexp_substr(v_line,'[^|~]+',1,6)) < 10
THEN to_date(ltrim(TRANSLATE(regexp_substr(v_line,'[^|~]+',1,6),'a~','a'),'0'),'mm-yyyy')
ELSE to_date(TRANSLATE(regexp_substr(v_line,'[^|]+',1,6),'a~','a'),'mm-dd-yyyy')
END,
CASE
WHEN LENGTH(regexp_substr(v_line,'[^|~]+',1,7)) < 10
THEN to_date(ltrim(TRANSLATE(regexp_substr(v_line,'[^|~]+',1,7),'a~','a'),'0'),'mm-yyyy')
ELSE to_date(TRANSLATE(regexp_substr(v_line,'[^|]+',1,7),'a~','a'),'mm-dd-yyyy')
END,
CASE
WHEN LENGTH(regexp_substr(v_line,'[^|~]+',1,8)) < 10
THEN to_date(ltrim(TRANSLATE(regexp_substr(v_line,'[^|~]+',1,8),'a~','a'),'0'),'mm-yyyy')
ELSE to_date(TRANSLATE(regexp_substr(v_line,'[^|]+',1,8),'a~','a'),'mm-dd-yyyy')
END,
CASE
WHEN LENGTH(regexp_substr(v_line,'[^|~]+',1,9)) < 10
THEN to_date(ltrim(TRANSLATE(regexp_substr(v_line,'[^|~]+',1,9),'a~','a'),'0'),'mm-yyyy')
ELSE to_date(TRANSLATE(regexp_substr(v_line,'[^|]+',1,9),'a~','a'),'mm-dd-yyyy')
END,
CASE
WHEN LENGTH(regexp_substr(v_line,'[^|~]+',1,10)) < 10
THEN to_date(ltrim(TRANSLATE(regexp_substr(v_line,'[^|~]+',1,10),'a~','a'),'0'),'mm-yyyy')
ELSE to_date(TRANSLATE(regexp_substr(v_line,'[^|]+',1,10),'a~','a'),'mm-dd-yyyy')
END,
TRANSLATE(regexp_substr(v_line,'[^|~]+',1,11),'a~','a')
-----commit;
END LOOP;
utl_file.fclose(v_file);
END;
text file
A50.0||Short|Long|Full|01-01-2009|01-2009||01-01-2013|09-18-2012|C|
A50.1||Short|Long|Full|01-01-2009|01-01-2009||001-2013|09-18-2012|C|
A50.2||Short|Long|Full|01-01-2009|01-01-2009|67|01-01-2013|09-18-2012|C|
A50.3||Short|Long|Full|011-2009|01-01-2009||01-01-2013|09-18-2012|C|
A50.4||Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|5|
A50.5|R|Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
A50.6||Short|Long||01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
A50.7||Short||Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
2345||Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
A60.0|N|Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
A60.1|N|Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
A60.2|N|Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
A60.3|N|Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
A60.4|N|Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
A60.5|N|Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
A60.6|N|Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
A60.7|N|Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
A60.8|N|Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
A60.9|N|Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
A70.0|N|Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
A70.1|N|Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
A70.2|N|Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
A70.3|N|Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
A70.4|N|Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
B222|N|Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
A4.1|N|Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
A4.2|N|Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
A4.3|N|Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
A4.4|N|Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
A4.5|N|Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
A4.6|N|Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
A4.7|N|Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
A4.8|N|Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
A4.9|N|Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
A5.0|N|Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
A5.1|N|Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
A5.2|D|Short|Long|Full|01-01-2009|01-01-2009|01-10-2013|01-01-2013|09-18-2012|C|
A5.3|D|Short|Long|Full|01-01-2009|01-01-2009|01-10-2013|01-01-2013|09-18-2012|C|
D642|D|Short|Long|Full|01-01-2009|01-01-2009|01-10-2013|01-01-2013|09-18-2012|C|
A5.5|D|Short|Long|Full|01-01-2009|01-01-2009|01-10-2013|01-01-2013|09-18-2012|C|
A5.6|D|Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
A5.7|C|Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
A001|C|Short Updated|Long Updated|Full Updated|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
A009|C|Short Updated|Long Updated|Full Updated|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
A5.10|C|Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
A0109|C|Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
F10.0|N|Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
F10.1|N|Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
F10.2|N|Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
F10.3|N|Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
F10.4|N|Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
F10.5|N|Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
F10.6|N|Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
F10.7|N|Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
A30|C|Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
A316|C|Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
A317|C|Short|Long|Full|01-01-2009|01-01-2009||01-01-2013|09-18-2012|C|
----clearly read text file insert into table and error records load into error table
please help me

hI
i am using utl_file prepared script but i got error like 01861. 00000 - "literal does not match format string"
script:
DECLARE
f utl_file.file_type;
s VARCHAR2(32000);
f1 VARCHAR2(100);
f2 varchar2(100);
F3 VARCHAR2(100);
F4 VARCHAR2(100);
F5 VARCHAR2(100);
F6 DATE;
F7 DATE;
F8 DATE;
F9 DATE;
F10 DATE;
f11 CHAR(1);
BEGIN
--DBMS_OUTPUT.ENABLE(100000);
f := utl_file.fopen('MID5010_DOC1TP', 'OPT_CM_BASE.txt', 'R');
LOOP
BEGIN
UTL_FILE.GET_LINE(f, s);
f1 := REGEXP_SUBSTR (s,'[^|]+',1,1);
f2 := REGEXP_SUBSTR (REPLACE(s,'||','||'),'[^|]+', 1,2);
F3 := REGEXP_SUBSTR (REPLACE(s,'||','||'),'[^|]+', 1,3);
F4 := REGEXP_SUBSTR (REPLACE(s,'||','||'),'[^|]+', 1,4);
F5 := REGEXP_SUBSTR (REPLACE(s,'||','||'),'[^|]+', 1,5);
F6 := to_date(REGEXP_SUBSTR (REPLACE(s,'||','||'),'[^|]+',1,6),'mm-dd-yyyy');
F8 := to_date(REGEXP_SUBSTR (REPLACE(s,'||','||'),'[^|]+',1,8),'mm-dd-yyyy');
F7 := to_date(REGEXP_SUBSTR (REPLACE(s,'||','||'),'[^|]+',1,7),'mm-dd-yyyy');
F9 := to_date(REGEXP_SUBSTR (REPLACE(s,'||','||'),'[^|]+',1,9),'mm-dd-yyyy');
F10 :=to_date(REGEXP_SUBSTR (REPLACE(s,'||','||') ,'[^|]+',1,10),'mm-dd-yyyy');
f11 := REGEXP_SUBSTR (REPLACE(s,'||','||'),'[^|]+', 1,11);
INSERT
INTO OPTUM_ICD10CM_BASE
( CODE,
STATUS,
SHORT_DESCRIPTION,
LONG_DESCRIPTION,
FULL_DESCRIPTION,
CODE_EFFECTIVE_DATE,
CHANGE_EFFECTIVE_DATE,
TERMINATION_DATE,
RELEASE_DATE,
CREATION_DATE,
VALIDITY
VALUES
F1,
F2,
F3,
F4,
F5,
F6,
F7,
F8,
F9,
F10,
f11
EXCEPTION
WHEN NO_DATA_FOUND THEN
EXIT;
END;
END LOOP;
UTL_FILE.FCLOSE(F);
END;
please help me(in my org looks utl_file standards only)

Can I save and read text files on a server that I host?

Hello everyone,
I am a java hobbiest. I was wondering if I set up my own server, running out of my house, could I have my applets save to my computer and read from my computer without having to learn JDBC and a DATABASE language. In other words could i just have my applet save and read text files from and to my server?
I'm trying to set up a sight for my 5th grade class where parents can log into. Thanks for your time.
Oh yeah, which is easier, learning how to set up a server or learning JDBC and a DATABASE language?
If you have any other good idease please tell me them
Thank you, Bryan

Short answer: This isn't gonna work
Long answer: For this to work, the first thing you're going to need is a static IP address and a DNS name registered -actually you don't necessarily need #2 but you're probably gonna want it and it's by far the easier of the steps.
As far as I know to get a fixed IP address you've either gotta be directly attached to a larger network (ie university network) or get a leased line from an ISP.
Once you've got that done come back to us.

If possible 2 read text files in nokia 6070 mobile...

i have nokia 6070 mobile.i want 2 save & read my text files.if possible 2 read text files in nokia6070 mobile?

Yes it is possible by installing a java based app.
You can find some here.

Read text file and insert into MySQL

Dears,
I need to read text file and then insert the data in the correct column in the MySQL database
example
I have the following text file:
field1=1234 field2=56789 field3=444555
field1=1333 field2=2222 field3=333555
and so on and so forth ,,note that all rows are identical and just the filed value is changed(there is a dilemeter between fields)
how can I read field1,field2 and field3 from text file and insert them in the correct table and column in the database.....
any help?????
thanks for your cooperation
Best Regars

Sure.
Which part don't you understand?
1. Reading a text file
2. Parsing the text file contents.
3. Relational databases and SQL.
4. How to create a database.
5. How to connect to a database in Java.
6. How to insert records into the database in Java.
7. How to map Java objects to records in a database.
This is a pretty nice list. Solve complex problems by breaking them into smaller ones.
%

How to create and read text file using LabVIEW 7.1 PDA module?

How to create and read text file using LabVIEW 7.1 PDA module? I can not create a text file and read it.
I attach my code here.
Attachments:
File_IO.vi ‏82 KB

Well my acquisition code runs perfect. The problem is reading it. I can't seem to read my data no matter what I do. My data gets saved as a string using the array to string vi but I've read that the string to array vi (which I need to convert back to array to read my data) does not work on the pda. I'm using version 8.0. So I was trying to modify the program posted in this discussion so that it would save data from my DAQ. I did that but I still can't read the data after its saved. I really don't know what else to do. All I need to do is read the data on the pda itself. I can't understand why I'm having such a hard time doing that. I found a possible solution on another discussion that talks about parsing the strings because of the bug in the "string to array" vi. However, that lead me to another problem because for some reason, the array indicators or graphs don't function on the pda. When i build the program to the pda or emulator, the array indicators are faded out on the front panel as if the function is not valid. Does this kind of help give a better picture of what I'm trying to do. Simply read data back. Thanks.

Read text file in Flash

Similar Messages

Maybe you are looking for